Incredibly Long Extraction Times

I have been trying to insert a series of PowerPoint slides, converted to jpegs into a taped lecture using a new MacBook Pro 15" with the latest Leopard OS and dual processor...nothing else running but IMovieHD from ILife 08
When I paste the image at the playhead, it is set to extract the lecturer's audio, but I am experiencing really long render times for the extraction. Clips of virtually any length take about 8 minutes to extract and if the image straddles two different clips, I have to sit through two renders which can take 15-20 minutes. Even if the first portion of the straddle covers only a few frames of the first clip, it still takes at least 8 minutes to render that portion and then it does a second render...again of around 8 minutes.
For a project of any length with lots of inserts like this, having to wait this length of time for every render is agonizing. I can't believe it actually should be taking so long to complete this task. Am I doing something wrong?

Yes, If what you want is a slide show, then the easiest way is to put all the slides, in order, in an iPhoto album.
Then drag the whole iPhoto album into a new project. If you want to set a default KBE/crop, transition type and length, etc. It is easiest to do this in project preferences before you drag in the album. You can add music to the slideshow and do further edits.
The comment about dragging a jpeg to a video clip applies if you are trying to keep the main "voice track" from the video playing while superimposing jpegs over the video footage.
Also, if you need no video footage, and the video is only being used as a voice track, you would probably be better off creating the slide show, and then exporting it to the media browser. Then use Garageband to record the voice track.
Message was edited by: AppleMan1958
Message was edited by: AppleMan1958

Similar Messages

Incredibly Long Lag Time When Working With Effects in Premiere Pro CC 2014

I am having incredibly long lag times when working with effects in Premier Pro CC 2014. Like 60 seconds or more. This also happens periodically when I am doing something as simple as cutting into a timeline (just ripple deleting from and in to an out point).
I have a MacBook Pro running OSX 10.9.4 2 GHz Intel Core i7 with 16 GB 1600 MHz DDR3.
I have seen that some people are having different versions of the same problem. I do have RedGiant plug-ins, but I am not using any of them in this project. The Red Giant plugs (again, not being used in the project) include MOJO and Universe. The previous version most certainly did not work like this. Any ideas? I did try moving the Red Giant plugs out of the COMMON folder and "alt" starting up to reset preferences. Still having same problems.
A specific example is I have an interview shot. I add brightness and contrast. Just making a change to the effect (increasing brightness) causes freezing of the interface and long delays. I added a piece of transparent video on a top layer to add a CIRCLE to create a vignette effect. Same deal -- ridiculously long times for effect changes to take place.
Does anyone have any clues as to how to fix these problems?
THANKS FOR ANYONE'S HELP!!!!!!!

Got the same Error. Previous I worked with a GTX 760, and was hoping to get it fixed with using a GTX 780 6GB. But just as you, didn't solve the Problem.
Usually I got the Problem solved, with exiting Premiere, restarting it, reset my Workspace. Then the Problem of having the bugged Workspace was gone. And also the Problem of the missing Video Tracks.
At the moment I started on a new Project. Pretty simple, with only a 21 second DV footage. And here I was switching tabs with my Browser, came back to the Project, and the Video Tracks were gone. I saved, closed Premiere, restated and the Video Tracks are still missing.
So I made a new Sequence, voilá the Video Tracks are there. Thus I need to copy and paste the Tracks onto the new Sequence.
But that is not really a solution!
I was on the Phone with Adobe, and on Chat, but they couldn't help me. They suggested to get a Tesla or Quadro Card, or at least a GPU that got confirmed as working on their page. I did that, but obviously, that is not the issue.

Incredibly long wait times [SOLVED]

anyone have any idea why I'd be getting *incredibly* long wait times on my server? [http://omploader.org/vNTRuYg]
it only seems to affect my wordpress installation, though.. everything else seems ok. I don't get it.
EDIT: changing the SCRIPT_FILENAME fastcgi_param to $document_root$fastcgi_script_name seemed to help quite a bit.
Last edited by Stythys (2010-08-03 03:28:11)

How to get to your VZ Router
http://192.168.1.1
User Name: admin (is the default) or YOURS IF YOU HAVE CHANGED IT
Password: Enter the password that is printed next to “Default Password” on the label attached to the bottom of your FIOS Router..or YOURS IF YOU HAVE CHANGED IT
Now you are at the main menu for your router
EXPLORE ALL BEFORE CHANGING ANYTHING
THEN GOT TO Wireless Settings if you want to set up WPA2
Advanced Security Settings
Custom Pre-Shared Key….MINE IS 20 CHARACTERS ALPHA NUMERIC ASCII
SUGGEST YOU RECORD ANY CHANGES THAT YOU MAKE
Verizon FIOS Router Manuals
http://www.verizon.com/support/residential/internet/fiosinternet/networking/user+guides/user+guides....
Tom
Freedom Essentials, QIP 7100 1,Bose SOLO TV Sound System,,QIP 7216 P2,M1424WR Rev F, iPad 2 WiFi,iPhone 5,TV SYST INFO Release 1.9.5 Build No. 17.45
Data Object 39.45

Incredibly Long Boot Times(5mins) when i powered ON thinkpad E440

Last week i bought the thinkpad E440. When i am poweing ON it is taking Incredibely long bootup time or it hangs..
It is not always but sometime it is happening.
Please help me if you have solution.
Its a brand new laptop, hoc can it behave so in just 3-4 days?

Hi Samimkhan,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with slow boot on your ThinkPad E440.
Have you checked booting the system into safe mode?
Check with uninstalling unwanted software and also antivirus application for temporary.
Is the system is getting overheated?
Optimize Windows for better performance.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to reduce long extraction time - Generic extractor based on view

Hello. The previous thread about this error was closed without any answer.
I'm in the same configuration.
"Using a generic extractor (Delta enabled on confirmation date) based on view to load data from ECC6 to BI.
Now my issue is that the delta extraction is running for a long time (around 1 hr) even if the data volume is very small
While checking the job overview in source system i saw that the job is hanging at the below step for almost 1 hr."
1 LUWs confirmed and 1 LUWs to be deleted with function module MF RSC2_QOUT_CONFIRM_DATA.
I am not understanding why this is happening.
Here is the log of the job:
30.05.2011 03:58:11 Job started
30.05.2011 03:58:11 Step 001 started (program SBIE0001, variant &0000000166864, user ID ALEREMOTE)
30.05.2011 03:58:11 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
30.05.2011 03:58:11 DATASOURCE = 0CO_OM_WBS_6
30.05.2011 03:58:11 *************************************************************************
30.05.2011 03:58:11 *          Current Values for Selected Profile Parameters               *
30.05.2011 03:58:11 *************************************************************************
30.05.2011 03:58:11 * abap/heap_area_nondia......... 4000000000                              *
30.05.2011 03:58:11 * abap/heap_area_total.......... 8000000000                              *
30.05.2011 03:58:11 * abap/heaplimit................ 100000000                               *
30.05.2011 03:58:11 * zcsa/installed_languages...... DEFS                                    *
30.05.2011 03:58:11 * zcsa/system_language.......... E                                       *
30.05.2011 03:58:11 * ztta/max_memreq_MB............ 2047                                    *
30.05.2011 03:58:11 * ztta/roll_area................ 6500000                                 *
30.05.2011 03:58:11 * ztta/roll_extension........... 2000000000                              *
30.05.2011 03:58:11 *************************************************************************
30.05.2011 03:58:11 1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
30.05.2011 05:02:53 Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 171 records
30.05.2011 05:02:53 Result of customer enhancement: 171 records
30.05.2011 05:02:53 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 171 records
30.05.2011 05:02:53 Result of customer enhancement: 171 records
30.05.2011 05:02:53 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
30.05.2011 05:02:53 IDOC: Info IDoc 2, IDoc No. 4667050, Duration 00:00:00
30.05.2011 05:02:53 IDoc: Start = 30.05.2011 03:58:11, End = 30.05.2011 03:58:11
30.05.2011 05:02:53 tRFC: Data Package = 1, TID = AC11082D38B44DE308DD028A, Duration = 00:00:00, ARFCSTATE = RECORDED
30.05.2011 05:02:53 tRFC: Start = 30.05.2011 05:02:53, End = 30.05.2011 05:02:53
30.05.2011 05:02:53 Altogether, 0 records were filtered out through selection conditions
30.05.2011 05:02:53 Asynchronous transmission of info IDoc 3 in task 0003 (0 parallel tasks)
30.05.2011 05:02:53 IDOC: Info IDoc 3, IDoc No. 4667051, Duration 00:00:00
30.05.2011 05:02:53 IDoc: Start = 30.05.2011 05:02:53, End = 30.05.2011 05:02:53
30.05.2011 05:02:53 Synchronized transmission of info IDoc 4 (0 parallel tasks)
30.05.2011 05:02:53 IDOC: Info IDoc 4, IDoc No. 4667052, Duration 00:00:00
30.05.2011 05:02:53 IDoc: Start = 30.05.2011 05:02:53, End = 30.05.2011 05:02:53
30.05.2011 05:02:53 Job finished
Thanks for your help.
Yann

Parth Kulkarni,
following the note and the other thread, I've check the index 4 of the table COEP.
Here is what I got:
Index ID           COEP             - 4
Short text         MANDT/TIMESTMP/OBJNR, Index for Delta read method (CO-PA)
Last changed       SAP             04.01.2010
Status             Active          Saved
                   Does not exist in the database
DB index nme
    Not defined as DB index in the ABAP Dictionary
Is the fact that it doesn't exist in the database a problem ?
Is the fact that it is active is good enough ?
By the way thanks for your speedy reply !
Yann
Edited by: Yann GOFFIN on May 30, 2011 1:35 PM

Incredibly long restore time on new iPhone?

Apple exchanged my iPhone 3g today, no questions asked and that was a good thing. I brought it home and plugged it into iTunes to restore it and it sat there for 3 hours...still not restored.
It moves at an acceptable rate until it hits approx. 3/4 of the way done (on the progress bar), and then it just sits there for an hour.......
Any wisdom on that subject?
Thanks to all!

how did you end up fixing this issue?

Logic Pro takes incredibly long time to start

Dear forums
I noticed not long ago that Logic Pro takes an incredibly long time to start. I know I have quite a number of plugins installed and I guess it's going through the plugin folder to initialize all of them and look for new ones. Fair enough.
But it takes 2 minutes to finally show a splash screen and after 2 minutes and 20 seconds I can finally start using Logic Pro. Is that normal or am I the only one?
Interestingly, I noticed that after the upgrade to Aperture 3.1, also Aperture suddenly took a long time to load. Also almost exactly 2 minutes and 20 seconds (and I barely have plugins in Aperture). Usually you start the software and spend some hours with it, I know. But I jump in and out of apps a lot and the loading times are quite annoying. I think 2.5 minutes are quite a loading time. I can boot my whole Mac 4x in that timeframe.
Any ideas where that might be coming from? Is that normal and am I being too picky? Thanks for a reality check

Created new user account. Same thing. Logic took over 2 minutes to even start validating all the installed AU plugins (first thing it does on a new user account). After that, another start took also 2 minutes until the "choose project template" dialog appeared.
I read some posts that mounted USB sticks or flash cards could make Aperture super slow when importing photos. I have Boot Camp installed and have a Windows 7 NTFS partition on the same drive as my MacOS. So, out of curiosity, I forced it to unmount as the partition automatically gets mounted by the OS.
Voilà! That seems to have been the culprit! Now both Logic and Aperture display the splash screen in seconds and start like they are supposed to. Thanks for your help. Without your suggestions I probably would have never tried this.

Long duration time extraction BKPF table

I have access to SAP R/3 on a Oracle database.
For one object GL Open Items I need to extract all required data from 2 tables BSIS and BKPF. (=select all open items of required G/L Accounts)
Selection Criteria as follows:
step 1:Select BSIS records on MANDT, BUKRS and HKONT (from a list of GL Accounts).
step 2:Select BKPF records where:
- BSIS-MANDT=BKPF-MANDT
- BSIS-BUKRS=BKPF-BUKRS
- BSIS-GJAHR=BKPF-GJAHR
- BSIS-BELNR=BKPF-BELNR
I have used SQL statements in order to get the data out of SAP but this will lead to an enormous long duration time, caused by the BKPF table. Therefore I need to improve my performance of BKPF.
Do you have a solution in how to fasten the BKPF data extraction? (other tooling/special code written, etc.)? SQL tooling is not a must!
Thanks

Long duration time extraction BKPF table
Markus

Long load times and poor application performance

We have packaged and deployed Adobe CC using SCCM within my school division. It pushed out fine, but now when we attempt to open Photoshop (or any other CC app) it has unusually long load times. 2-4 minutes. It seems to be hanging at the "Reading preferences" stage. After the application appears to have started, it takes an unusually long time to actually start working in the application (it appears to just hang).

Hello There,
EXE's always bundle additional files because it is a stand-alone entity. And, if the size 9GB then it will surely take time to load all the files. I'll check with the team again on how we can optimize it. BTW, are the videos inserted as slide video or Event video?
Thanks,
Vish

Long Load Times on Graphic Intensive Games

I'm experiencing some absurdly long load times (1-3 hours) with many games (SPORE, Portal, X:3, etc...) that I believe may be related to how graphically intensive they are. Older games with lower graphics quality (WoW, Civ 4, etc...) load up fine.
When I load any newer game the icon appears in the tray and the computer does nothing else for at least an hour, whereupon the program loads and begins playing immediately--often without any further delays or issues.
I also use Boot Camp to run Windows Vista (Ultimate 32) and experience no delays when running SPORE on Windows.
Below are my specs:
Hardware:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.9f4
Serial Number: QP7121Q** <Edited by Moderator>
Network:
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Built-in Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Ethernet:
MAC Address: 00:17:f2:d4:e8:98
Media Options:
Media Subtype: Auto Select
Built-in FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:19:e3:ff:fe:81:ea:7a
Media Options: Full Duplex
Media Subtype: Auto Select
Software:
System Software Overview:
System Version: Mac OS X 10.5.3 (9D34)
Kernel Version: Darwin 9.3.0
Boot Volume: MacintoshHD
Boot Mode: Normal
Computer Name: emeldi
User Name: Mike (mike)
Time since boot: 1 day9:05
ATA:
ATA Bus:
MATSHITADVD-R UJ-85J:
Capacity: 423.4 MB
Model: MATSHITADVD-R UJ-85J
Revision: FCQ5
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk1
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
Volumes:
SPORE:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
BSD Name: disk1s0
Mount Point: /Volumes/SPORE
Volumes:
disk1s0:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x83847680
Audio ID: 23
Available Devices:
Headphone:
Connection: Combo
Microphone:
Connection: Internal
Speaker:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.1.0f17
Hardware Settings:
emeldi:
Address: 00-17-f2-be-d3-95
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: No
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Documents
Requires Authentication: No
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
JabraBT125:
Name: JabraBT125
Address: 00-1a-45-81-c4-f6
Type: Headset
Services: Headset, Hands-Free unit
Paired: Yes
Favorite: Yes
Connected: No
Manufacturer: Cambridge Silicon Radio ($3, $978)
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 6/22/08 3:50 AM
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-85J:
Firmware Revision: FCQ5
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media:
Type: CD-ROM
Blank: No
Erasable: No
Overwritable: No
Appendable: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
Graphics/Displays:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-139
EFI Driver Version: 01.00.139
Displays:
iMac:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Built-In: Yes
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display Connector:
Status: No display connected
Memory:
BANK 0/DIMM0:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDD
BANK 1/DIMM1:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDC
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 15
Sleep On Power Button: Yes
Automatic Restart On Power Loss: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: No
Hardware Configuration:
UPS Installed: No
Printers:
Lexmark All In One:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: Yes
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=1d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Lexmark All In One-1:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: No
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=3d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD2500JS-40TGB0:
Capacity: 232.89 GB
Model: WDC WD2500JS-40TGB0
Revision: 20.06C04
Serial Number: WD-WCANY2508218
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
MacintoshHD:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Volumes:
disk0s2:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x27cc
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Version: 1.84
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c9
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Hub:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: OEM
Product ID: 0x0061
Vendor ID: 0x043d
Lexmark All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0069
Vendor ID: 0x043d
All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0060
Vendor ID: 0x043d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27ca
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x5d
USB Multimedia Keyboard:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9462
Serial Number: Au9462
Vendor ID: 0x058f
USB RECEIVER:
Version: 25.10
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0xc50e
Vendor ID: 0x046d
USB Multimedia Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9410
Serial Number: Au9462
Vendor ID: 0x058f
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c8
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27cb
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x7d
Bluetooth USB Host Controller:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x8206
Vendor ID: 0x05ac (Apple Computer, Inc.)
IR Receiver:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer, Inc.
Product ID: 0x8240
Vendor ID: 0x05ac (Apple Computer, Inc.)
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x14E4, 0x87)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.7)
Current Wireless Network: ACTIONTEC
Wireless Channel: 9
Firewall:
Firewall Settings:
Mode: Limit incoming connections to specific services and applications
Services:
File Sharing (AFP): Allow all connections
Printer Sharing: Allow all connections
Applications:
com.apple.iChat: Allow all connections
com.apple.ODSAgent: Allow all connections
com.aspyr.empireatwar: Block all connections
com.RealNetworks.RealPlayer: Allow all connections
Locations:
Automatic:
Active Location: Yes
Services:
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial On Demand: No
Disconnect On Fast User Switch: Yes
Disconnect On Idle: Yes
Disconnect On Idle Time: 600
Disconnect On Logout: Yes
Disconnect On Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:17:f2:d4:e8:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:19:e3:ff:fe:81:ea:7a
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
AirPort:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: 00:19:e3:df:5e:9b
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
IEEE80211:
Allow Net Creation: Yes
Disconnect On Logout: No
InterferenceRobustness: 0
Join Mode: Automatic
JoinModeFallback: Prompt
MAC Address: 00:19:e3:df:5e:9b
PowerEnabled: 1
PreferredNetworks:
SecurityType: Open
SSID_STR: ACTIONTEC
Unique Network ID: F0FA7942-54E7-409B-A1CA-10B05F3B2EDE
SecurityType: WPA2 Personal
SSID_STR: D Pad
Unique Network ID: A391D57D-A4EC-4B2E-B741-0D6569BD77AB
Unique Password ID: 404D3742-17AA-4C24-A229-7E37725522EA
SecurityType: Open
SSID_STR: linksys
Unique Network ID: FD2A5229-348A-4E90-B4E2-48E4DE62C394
SecurityType: Open
SSID_STR: M and M
Unique Network ID: D980D42A-E76C-4A68-920D-AAC9537C26C9
SecurityType: Open
SSID_STR: default
Unique Network ID: 5A2D9117-3263-46B9-952D-A4463BA5F377
SecurityType: Open
SSID_STR: Sweet Lou's **** Shack
Unique Network ID: FA247542-1EF4-41B6-A242-688E75C85B57
RememberRecentNetworks: 1
Ethernet Adaptor (en2):
Type: Ethernet
BSD Device Name: en2
Hardware (MAC) Address: 00:01:23:45:67:89
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet Adaptor (en3):
Type: Ethernet
BSD Device Name: en3
Hardware (MAC) Address: 00:10:32:54:76:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Volumes:
net:
Type: autofs
Mount Point: /net
Mounted From: map -hosts
Automounted: Yes
home:
Type: autofs
Mount Point: /home
Mounted From: map auto_home
Automounted: Yes
Universal Access:
Universal Access Information:
Cursor Magnification: Off
Display: Black on White
Flash Screen: Off
Mouse Keys: Off
Slow Keys: Off
Sticky Keys: Off
VoiceOver: Off
Zoom: Off

That's old info for the HDD space--I've purchased an external, so my main drive stays plenty free, now.

Long loading time if no internet connection available (VS 2005 Redist)

Hallo forum members!
I've been searching for a solution for my problem for a while - without success. It isn't really a critical issue, but quite annoying anyways.
Here's the problem i'm dealing with: I've developed an .NET application using Visual Studio 2005 and the included Crystal Report classes. When deploying my module everything works as expected, offering a decent performance when loading the Crystal Report assemblies provided by the redistributable package - if an internet connection is available. If the system doesn't offer such a connection (e.g. not properly configured proxy settings) the module takes a huge amount of time to be loaded. An examination (using ProcMon) leaded to the conclusion that the Crystal Report assemblies try to retrieve the system connection settings from the registry in order to establish a connection to the internet. This is done only once when loading for the first time.
Has anyone experienced the same problem? What is this connection used for? Is there a way to suppress this behaviour on systems without a valid internet connection in order to avoid this annoying long loading time?
Thanks on advance for your help.
Greetings,
L.F.

Nothing like a good vacation. And I got your christmas present early :). While you were away we (actually one other customer) figured it out. I have written a note re. the resolution that was supposed to be published yesterday, but it's still not out there, so here it is as I submitted it:
Symptom
When a report is loaded is takes between 150 - 180 seconds to display
This is only reproducible on computers with no internet connection
There are no error messages and the report comes up eventually
Reproducing the Issue
Create a Windows application with the following function calls:
new Report()
report.SetDataSource(dataSet)
The function SetDataSource takes 2 plus minutes to execute
Cause
On SetDataSource() an attempt is made to connect to crl.verisign.com
SetDataSource() uses the framework and as per the Microsoft Knowledge Base specified under "Resolution", it is actually the framework that is attempting the connection
Resolution
Solution is described in this Microsoft Knowlege Base:
http://support.microsoft.com/kb/936707
The following Microsoft article also discusses the issue:
http://msdn.microsoft.com/en-us/library/bb629393.aspx
An alternative workaround to the above is as follows:
Open IE and go to the Tools menu and select Internet Options...
Go to the Advanced tab
Find the Security heading
Under the Security heading find "Check for publisher's certificate revocation"
Uncheck this option
Keywords
long time load crl.verisign.com certificate revoked internet
The note will be published here:
https://www.sdn.sap.com/irj/sdn/businessobjects-notes
and the number will be 1270414
Ludek

Why do I get lots of noise in my photos on the D30 at long exposure times with 100 ISO speed? Help!

So I'm using a Canon D30 (3.1 megapixel). My ISO speed is set to 100, but when take phots at very slow shutter speeds I get a lot of noise. And I mean a lot. Can anybody help?

Long exposure time is the 2nd main way to get noise in an image. Not a lot you can do other than post processing. How long an exposure? Perhaps a compromise like ISO 200 and a shutter that is half as long (twice as fast) would be slightly better if you played around with it. Or perhaps that would be even worse.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

LONG lag time switching from other programs to Flash

(Intec-Mac - OSX - 1.5 GB RAM)
Has anyone heard of this before? Any time I switch from any
other open program to a project in Flash, I get a super long wait
time before I'm able to work with Flash again. The lag time
only happens when switching to Flash (I get the spinning
ball of death while the Flash menus load again -EVERY time!)
This happens no matter if I have just Flash open and I'm
switching from the finder back to it or if I have 15 programs open
at once...
It is super frustrating and slowing down my workflow between
Flash and any other programs! I just uninstalled and reinstalled
hoping it would help but got same result - Any help?

Your best bet at this point in time is more RAM, since the
Flash IDE on
mac is only PPC at this time it runs emulated in Rosetta on
Intel macs,
and I've noticed swap times can be quite slow, this is not
unique to
Flash in my experience, it happens whenever I swap in a
resource
intensive app. Parallels is another prime example - and it is
intel
native.
Adobe engineers appear to have a new found love of the Mac,
so we can
only hope the intel native version ships it will be super
zippy.
John Pattenden
Screentime Media - Flash Tools since 1997
http://www.screentime.com

I recently upgraded to 10.6.7 and Safari 5.05. Safari now has a long load time when you initially boot it up and when selecting a new tab. Other than that it works fine. What can I do ?

I recently upgraded to 10.6.7 and Safari 5.05. Safari now has a long load time when you initially boot it up and when selecting a new tab. Other than that it works fine. What can I do ?

Check Safari / Preferences - Extensions. If you have any installed, turn that off, relaunch Safari.
If it's not Extensions, check for third party Safari add ons.
http://support.apple.com/kb/TS3230?viewlocale=en_US

How do I deal with project bloat? Long Save time is getting worse?

Here are the FB posts I have got about this issue. I tried to paste them neatly but didn't work.
To be honest I am baffled that such an advanced NLE has so many issues. There should be a warning about the Warp Stabilizer messing up a project I had no idea till now.
This was my question to a PP user group on FB.
I am cutting a 60+ minute doc with lots of source material and the project takes a dogs age to save now which is beginning to interrupt my workflow. I would have thought the save would take less time depending on how much work was done since the last save. I suppose working with Proxies might be the solution but I am already 70% done.
Here are the responses
Saving the project file on an SSD might be a good idea.
Your project size is slowing you down. Create a couple of projects, each containing a part of the footage. Organized in bins as needed. Call them footage projects. Create an other project named edit and cut in there. Use the media browser to browse the footage projects. Import what you need and use search bins to keep it organized.
If you didn't transcode your footage before you started the project it could be part of the problem. And like the other post says only having the footage you are currently working on will also help. The claim that you don't have to transcode when working in Premiere is misleading because in most cases when working with many different source codecs transcoding will always improve your computers performance.
I had the exact same experience cutting a 90 min feature with 120 hours of Pro Res 4444 footage. Long save times are caused by project bloat, either by having too many assets loaded or a lot of warp stabilizer effects applied. Transcoding will only affect playback performance and exports - it doesn't sound like it's the problem in this case.
only some codecs (4K GoPro, 6K R3D, lengthy h264/AVCHD clips for example) benefit from transcoding and will be snappier and playback smoother. But transcoding will never ever help the loading or saving time of your project
Don't apply warp stabilizsr to everything. All those coordinates get stored in project file
All I can say is that I worked on a Premiere project in November where my computer spent up to 5-7 minutes scanning through all the different directories with footage after the project was open before I could play back the sequences in my project. I ha...
some of the ftg is in need of stabilization so I did use the warp stabilizer but not excessively. 15 x 3-10 second clips. Is there a way of managing the storage of the coordinates too minimize the hit on the project size?
nope. Try importing existing project into a new project.
I usually stabilize footage in a separate project to avoid huge project files, and export the stabilized result. Then I use the stabilized version in the main project.
I also work with Nested Sequences a lot. Working in short, manageable timelines. When opening a large project, Premiere will find the footage for the active sequence first, so I can start working quickly, while Premiere is still finding the rest of the footage.
Could do your warp stabilizing in AE and export renders of them, then import those renders into your project so the are just media files instead of files with stabilizer tracking points.

I usually stabilize footage in a separate project to avoid huge project files, and export the stabilized result. Then I use the stabilized version in the main project.
That would be something like the advice I would have given
and more likely...
Save heavy duty FX application until after you have locked down your edit. (eg Blurs , Warp, 3rd party FX(MB)
I Create separate sequences or Duplicate Projects for many reasons. eg CC/Grade and
Warp Stabiliser ...definitely. Its even has a slow save impact on After Effects Projects!

Incredibly Long Extraction Times

Similar Messages

Maybe you are looking for