Incredibly slow connection over WIFI only on Mac

Hi,
I have the following problem that cannot fix and I need your help.
I have a 10Mbit fiber optic ISP connection and a Belkin wifi accesso point.
In the same room I have an iPhone, an iPad and a PC succesfully connected and up/downloading at full speed (up to 900K).
The problem is on the Mac that can't go faster than 10K !!!
Sometimes it also drops and cannot see the wifi for a while. I tested also with all other devices turned off and the access point freshly restarted.
Any idea?
thanks a lot

update/more info
when connected via ethernet cable the speed is very fast, so I guess no disk fragmentation issues
also, sometime the connection to the access point breaks and I can't find it on the airport search (I don't see any other access point). All this while the orhert devices do see many wifi in the area and easily connect to mine at top speed.
definitely the issue is on the Mac.
forgot to say, my belkin is set with a WPA2 password.

Similar Messages

  • Playbook will not connect over WiFI to my MAC for File Sharing

    Just as the Ttitle says.
    It doesn't even show up as a USB drive when I plug it in via the supplied USB cable.
    WiFI File Sharing is pretty much the biggest feature I'll use on this device, so getting it up and running smoothly is a must and if I can't get it working soon I'll just return it.
    I find this very frustrating since it's apperantly supposed to work straight out of the box.
    Finder>Go>Connect To Server
    smb://PLAYBOOK (Name of my Playbook)
    Attempting to connect to server
    There was a Problem Connecting to the server "PLAYBOOK"
    The server may not exist or it is unavailable at this time. CHeck the server name or IP address, check your network connection, and then try again.
    Those are the three screens I get, sorry I can't upload the Screen/Window shots I took.

    Go to Storage & Sharing/
    Network Identification/
    look at the user name
    in my case the playbook assigned the name "playbook"
    when I loogged in with that username it worked.
    Now why did it do that?

  • ITunes detects iPhone over WiFi only when it's NOT connected to a power outlet

    iTunes detects my iPhone over WiFi only if it's NOT connected to a power outlet, so if I try to sync it fails.

    Hi there argelle1!
    I believe you will want to restore this iPod in order to resolve this issue, but there are some other troubleshooting steps you can try before that as well. Those steps can be found in this website:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Specifically, this is the section that refers to your issue:
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Unable to receive internet connection over wifi connection.  Shows that I am connected to the network, but do not have internet access.  Checked my firewall and turned it off.  What else am I missing or should be doing differently?

    Unable to receive internet connection over wifi connection.  Shows that I am connected to the network, but do not have internet access.  Checked my firewall and turned it off.  What else am I missing or should be doing differently?

    You might want to try resetting your router and your modem - just unplug the cords, leave them unplugged for about 3-5 minutes and then replug the modem and then the router in that order.
    This may or may not correct your problem - call back if it doesn't.
    Clinton

  • Imossible to connect my wifi only ipad

    I live in a remote part of Cornwall, and am out of any wifi signals. I also only have a wireless dongle. Is there any way i can connect my wifi only ipad without having to walk half a mile? Any help much appreciated! Nikki

    Check these links out:
    http://support.apple.com/kb/HT4517
    http://support.apple.com/kb/HT3574
    http://support.apple.com/kb/TS2756
    Help the above help.

  • TS4062 I'm trying to sync my ipad over wifi, with my MAC, I have the updated software on my MAC, the ipad is up to dat 6.1.2.  I can follow all of the steps, but I can't find a SUMMARY button on the toolbar, nor do I receive the option to sync.  Whats wro

    I'm trying to sync my ipad over wifi, with my MAC, I have the updated software on my MAC, the ipad is up to dat 6.1.2.  I can follow all of the steps, but I can't find a SUMMARY button on the toolbar, nor do I receive the option to sync.  What am I doing wrong or what should I look for?  Thank You

    To sync your iPad over Wifi:
    First ensure you're running iTunes 11.0.2. And you already have your iPad up to date, good.
    Plug your iPad into the Mac via USB. Click your iPad in the top toolbar (under the search bar). Click the Summary tab if it isn't already selected. Check the box to "Sync with this iPad over Wi-Fi" (you may have to scroll down to see it). And now click the Apply button at the bottom right.
    You should be able to unplug your iPad from the Mac and it should still remain in iTunes. (If not, try Quitting and relaunching iTunes and waiting, restarting iPad, etc).
    To initiate a sync over Wifi, click your iPad in the toolbar in iTunes then click Sync. Or on your iPad, go to Settings > General > iTunes Wifi Sync and tap "Sync Now."
    If this didn't solve your problem, please let me know with a more detailed explanation of what you're experiencing so I can try to help you get up and syncing wirelessly!

  • After lollipop update, native email app and third party email apps cannot connect to email server over wifi, only on 4g

    Updated to lollipop yesterday.  Now I cannot access email server (POP3) on wifi, only over 4G.  This is happening on native email app and third party apps such as K9.  Any help appreciated.

    We're terribly sorry to hear about the email issues. Let's get this resolved immediately. Since the update, have you tried to delete and re add the email account?
    SheritaH_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Mac doesn't connect over WiFi

    Hi,
    Since I updated my mac to 10.5.5 it doesn't automatically connect to my wireless, I have to click the airport thing and select my network and enter the WPA again.
    Any help?

    Now if I check my console just after a reboot, the logs said :
    18/10/2008 10:54:13 kernel AirPort: Link Down on en1
    18/10/2008 10:54:13 airportd[109] Error: Apple80211Associate() failed -6
    18/10/2008 10:54:14 mDNSResponder[16] Note: Frequent transitions for interface en1 (169.254.182.90); network traffic reduction measures in effect
    18/10/2008 10:54:14 mDNSResponder[16] Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021E:52FF:FE72:F30C); network traffic reduction measures in effect
    18/10/2008 10:54:14 mDNSResponder[16] Note: Frequent transitions for interface en1 (169.254.182.90); network traffic reduction measures in effect
    18/10/2008 10:54:18 mDNSResponder[16] Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021E:52FF:FE72:F30C); network traffic reduction measures in effect
    A know if I connect manually (it's work) my WIFI connection, the logs said :
    18/10/2008 11:01:03 kernel AirPort: Link Up on en1
    18/10/2008 11:01:05 airportd[201] Error: SecTrustedApplicationCreateFromPath() = 100002 (UNIX[No such file or directory])
    18/10/2008 11:01:05 airportd[201] Error: _ACKeychainSetPassword() Success! (0)
    I just come to migrate of OSX 10.4.x in 10.5.5.
    The automatic connection in Wifi worked well under 10.4.x But today under 10.5.5, the automatic connection doesn't work, either after a starting up, or after a setting in a stand-by mode.
    I suspect 10.5.5 of being the cause
    Message was edited by: Sush)i( Labs

  • IOS devices and Exchange won't connect over Wifi

    Neither my ipad nor my iphone 5 will connect with my exchange server over my wifi network.  The problem is limited to IOS devices on wifi and Exchange.  The phone will connect with exchange over the cellular network.  My windows laptop works fine over wifi with exchange and everything else.  The ipad and iphone will connect to wifi and have no problems with web browsing, gmail, etc.  I've used both devices successfully for months and the problem started yesterday.  I did not do any IOS updates yesterday.
    iPad and iPhone are both on IOS 7.0.4
    The message on the screen:  Cannot Get Mail.  Server error.  Contact your server administrator.
    It also says:  Cannot Get Mail.  The connection to the server failed.
    What I've tried:
    Resetting network settings (only tried on iPad, since it didn't work)
    Powering off each device then turning back on
    Powered down the wireless router and powered back up
    Confirmed with the exhange hosting company (GoDaddy) that they've made no changes

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • IMac no longer connects to wifi (3 other Macs + iPod Touch DO).

    My iMac 23" (3.06 GHz Intel Core 2 Duo, 4GB 1067 MHz, Airport card: Airport Extreme 0x14E4, 0x8E, fw version Broadcom BCM43xx 1.0, OS10.5.8) no longer connects to wifi. The connection has been dropping regularly over the past month or so and since this morning I can no longer connect wirelessly.
    I also have a MacBook (2.4 GHz Intel Core 2 Duo, 4GB 1067 MHz, Airport card: Airport Extreme 0x14E4, 0x93, OS10.6.4), a G5 (Dual 1.8 GHz PPC, 1.5 GB, OS10.4.11) and a PowerBook G4 (1.33 GHz, PPC, 768 MB, OS10.4.11) that connect perfectly well - all using a Zyxel Prestige 600 series/Airport Extreme (version 5.7). All 3 "see" the AE Base station in the Airport Admin Utility. To join this network, a password is required and I need to add the device in Access Control. My iPod Touch also connects to my network without problems. All connected Macs are up-to-date software-wise. I did not change anything in the iMac's settings prior to the wifi problems.
    The iMac does NOT see the base station (tried rescanning several times, unplugging the basestation, etc). It showed up a few times after I unplugged the base station but then disappeared again. Everything looks fine otherwise, the Network system preference says it's connected to my network. Airport status: full bars.
    I have tried to connect the iMac directly to the base station with a cable and that worked. I have also changed the channel (which was set at 10) to 1. I've renewed the DHCP lease.
    Looks to me this is an iMac problem, considering there's 3 other Mac's + an iPod Touch connecting to wifi without problems as I'm typing this.
    What happens when I delete the system configuration? Will I also lose all of my base station settings? (I have a long list of "approved devices" in there that I'll need to copy).
    Things tried:
    - restarted computer
    - restarted basestation
    - unplugged basestation + restarted iMac
    - switched off+on router + unplugged from basestation + restarted iMac
    - renewed DHCP lease
    - changed channel

    HI,
    Go to /Library/Preferences. Move all the files in the System Configuration folder to the Trash, restart the iMac.
    That doesn't alter your settings, just resets Airport.
    Carolyn

  • Slow streaming over wifi using ipad

    Why is streaming over wifi slower than over cellular connection?  Other devices don't have the same issue.

    generally we all think and expect wifi will be faster than a cell connection.  But that will not always be the case.  A good uncongested LTE runs pretty fast.
    But the wifi should be fast enough that you wouldn't notice any issues unless:
    You are using a public wifi spot where the signal is metered.  Where I work, they clamp the wifi for guests at 250k.
    The wifi cannot run any faster than your internet connection.  Is it clean?
    Recent stoires here are explaining how verizon and Comcast have been allowing you tube and netflix feeds to become overcongested, in an effort to extract $$ from them for the privilange of sending you the signal.
    a good place to start is to get a speed app - like Speed test (there are a bunch in the store) and see what speed your wifi is delivering.
    One thing that is almost certain, your wifi is a whole lot cheaper than your cell signal!

  • Hi I'm traveling from Canada to USA and I want to be able to use my iphone over wifi only, iMessage, and FaceTime etc. but I don't want to get charged. What do I do?

    I was wondering what I need to change or turn off in my settings and where I could find those things. I just don't want to get charged for roaming fees when I will only be using my phone over wifi. Please help. Anything is appreciated!

    Julibella,
    I think you should try a quick experiment on your local wireless provider's network.
    First turn off wifi (settings-wifi-toggle to off).  Open safari and ensure a webpage will load.  Then go to settings-general-cellular-and turn off cellular data.  Attempt to reload the webpage, the webpage should not load.  If that doesn't convince you attempt to use anything else that uses data (facebook app, email, etc) and they will all say you don't have a connection. 
    Also you could call your provider and I am certain they will give you similar instructions.

  • My iphone 4s and ipad 2 both with 7.0.4 update will no longer connect to wifi but non-mac lap top has no issues

    my iphone 4s and ipad2 both with 7.0.4 update will no longer connect to wifi.
    About three days ago the ability to connect came and went and the connection never lasted more than 10-15 minutes; it has not been able to connect since last night. I do not think it's my wifi router as non-mac lap top has no issues. I have seem many similar questions posted.

    Reboot your router by removing all power from it for about 15 seconds. Also, if your router still has its default SSID (such as LINKSYS, DLINK, NETGEAR, etc) change the SSID to something unique. Note that all other devices on your network will have to be reconnected if you change the name, but if the name is still the default that is most likely your problem.
    If the SSID is not the default then the reboot should fix it.

  • Able to connect keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please

    Hello,
    I am able to connect my wireless keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please
    thanks,

    Hello:
    You will need to delete the keyboard from the other Mac.  Simply disconnecting it leaves it still paired with the first Mac.
    Barry

  • Share Gobi2000 connection over WiFi

    Hello !
    I got a week ago my Thinkpad T510 with Gobi2000 3g modem. Everything works fine but I got an issue right now.
    Under Windows 7 I wanted to create ad-hoc WiFi network and share my 3g connection to other PC and Android Phone.
    On Android there is no listed any WiFi connection.
    On PC it is visible but I cannot connect to it.
    I found an application called Connectify but it does not support sharing internet via Gobi2000.
    Is there any other way to share this 3g connection via WiFi ?
    Have you tried it already ?
    Thanks for any answer !
    hsz

    hsz wrote:
    I found an application called Connectify but it does not support sharing internet via Gobi2000.
    Connectify normally doesn't care what sort of 3G device you have, it only cares about what WiFi card you have.  I suggest that you read through the Connectify instructions again.
    Cheers,
    Bill
    I don't work for Lenovo

Maybe you are looking for

  • Help with Conditional Display and Validation

    Version 4.1.1.00.23 Hello, I'm having a difficult time with a conditional display and validation I'm hoping someone can help with. Requirements: When the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Sele

  • Updating linked fields in a persistent class

    Hi all, If a field of a persistent class is updated, what is the best way to update a related field? Scenario: A persistent class with public GET/SET access to a table field STUFF, and public GET access to a field CATEGORY. Whenever SET_STUFF is call

  • How to send the SOAP Fault Message to the Web Service Consumer

    Hi, I have configured SAOP  to Proxy Syncronous Scenario in PI 7.1 and using XML Validation  in Adapter Engine to Validate the Structure of the Message Payload.The scenario is working fine.When some of the Filed's Length  increses the maxLength speci

  • Itunes crashed during sync and now it wont sync my apps?????

    i was syncing my itunes and was updating my itunes which i minimized away, and then suddenly itunes crashed and itunes kept updating i closed the update and went back on and finished the sync but some apps i purchased werent there. i have since updat

  • Unplanned Services

    Hi, Where can i maintain the Value of Unplanned services in Service PO,so that i can enter Unplanned services during service entry sheet. Regards