Incredibly slow internet (Connected through airport)

Hey there!
I just got myself a new Macbook around 2 months ago and so far I'm very happy with it. I haven't had any problems except for one.
I'm connected to the internet wireless through Airport and since about a week ago loading web pages is going incredibly slow, whether I use Safari or Firefox. I didn't have this problem before and I didn't change any internet settings. Nothing else changed eigher. I'm still connected to the same network and I didn't install any dodgy programs on my network. Downloading or loading videos doesn't seem to be a problem though. When downloading from a fast server like mac or windows (I know I shouldn't but hey, all my friends use msn ;)) I can easily make the 300 kb/sec. Also waching video's on apple.com/trailers isn't a problem. It's only the loading of web pages or sending e-mails. It sometimes takes up to half a minute to even load google.com. I'm not sure but it might have started after a software update. not at all sure though! Can anybody help me please! Thanks!
Regards from the Netherlands,
Jop
Message was edited by: boarderjop

Hi Jop, and Welcome to the discussions!
Two things to try first...
Fix Permissions using the Disk Utility, then reboot. or better yet, get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Try putting these in Network>TCP/IP>DNS Servers:
4.2.2.1
4.2.2.2
Might be better ones for you over there, but worth a try.
Message was edited by: BDAqua

Similar Messages

  • Problems sharing internet connection through Airport with a PS3

    Does anybody know how to share an internet connection wirelessly with a PS3? I've tried everything including following directions from the tech support people from both Sony and my ISP (Verizon) and nothing works. Last time I've talked to Verizon I've obtained a IP number from them as Sony recommended and that did not work either. Is anybody out there with a PS3 sharing the internet connection through Airport successfully? I'd really appreciate any help. Thanks.!!
    Message was edited by: pbranda

    Let's double-check your Mac's Internet Sharing settings ...
    To setup for Internet Sharing (Wired to Wireless):
    Setup the Network
    Cable Modem > (Ethernet cable) > \[Ethernet port] Mac > (wireless) > PS3
    Enable Software Firewall
    System Preferences > Security > Firewall
    o Block all incoming connections (enabled)
    Enable Internet Sharing
    System Preferences > Sharing
    o Select "Internet Sharing" from the options in the left column
    o Share your connection from: Built-in Ethernet
    o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
    AirPort Options...
    o Network Name: <anything you want>
    o Channel: Automatic
    o Enable encryption (using WEP) (optional)
    o Password: (optional)
    o Confirm Password: (optional)
    o WEP Key Length: (optional)
    o Click OK
    o Select "Internet Sharing" again
    o Click "Start" to start Internet Sharing
    o Click Start

  • Slow internet connection via AirPort on MacBook running 10.5.7

    The internet connection via AirPort on my MacBook is frustratingly slow, and I have no idea why.
    I have an AirPort Extreme connected to a Virgin Media cable modem, a new iMac and a two year-old MacBook, both running 10.5.7. No problems at all with the wireless connection on the iMac - I get the full near-10Mbps download speed I'm paying for, despite the fact it's at the other end of the house. Not so on the MacBook, where I get barely 2Mb, even if I'm sat next to the router.
    I've had other AirPort problems since the 10.5.6 update - notably one common to a lot of people on here, it seems, of the AirPort dropping the wireless connection every 2 mins. This was only 'fixed' by the fairly drastic workaround of essentially abandoning my user account and connecting via a different one.
    For the slow internet problem, I've tried resetting the PRAM, turning off my cordless landline phone, changing the wireless channel - to no avail. I can't test the wired connection as my MacBook doesn't recognise my Ethernet port, it would seem, and hasn't for a long time.
    Can anyone help? Thanks in advance.

    For the slow internet problem, I've tried resetting the PRAM, turning off my cordless landline phone, changing the wireless channel - to no avail. I can't test the wired connection as my MacBook doesn't recognise my Ethernet port, it would seem, and hasn't for a long time.
    I assume that you meant NVRAM as PRAM is not used with Intel-based Macs. Regardless, network settings are not stored here and resetting it won't really help. The fact that your MacBook is not recognizing the built-in Ethernet port is telling me that may have an issue with the system board ... that may be showing up as poor performance with the AirPort as well. I suggest that you take your MacBook in to your local Apple Store to have them take a look.

  • Slow internet connection via AirPort on MacBook under 10.5.7

    The internet connection via AirPort on my MacBook is frustratingly slow, and I have no idea why.
    I have an AirPort Extreme connected to a Virgin Media cable modem, a new iMac and a two year-old MacBook, both running 10.5.7. No problems at all with the wireless connection on the iMac - I get the full near-10Mbps download speed I'm paying for, despite the fact it's at the other end of the house. Not so on the MacBook, where I get barely 2Mb, even if I'm sat next to the router.
    I've had other AirPort problems since the 10.5.6 update - notably one common to a lot of people on here, it seems, of the AirPort dropping the wireless connection every 2 mins. This was only 'fixed' by the fairly drastic workaround of essentially abandoning my user account and connecting via a different one.
    For the slow internet problem, I've tried resetting the PRAM, turning off my cordless landline phone, changing the wireless channel - to no avail. I can't test the wired connection as my MacBook doesn't recognise my Ethernet port, it would seem, and hasn't for a long time.
    Can anyone help? Thanks in advance.

    help...same here (mostly)
    eight core macpro on the same wireless network (10 feet from extreme base station) as my macbook pro (2008 top of the line)
    everything updated. the macpro is just fine with the internet, the macbook pro is horribly slow.
    tried downgrading firmware on the airport...no difference.
    help!!
    Message was edited by: leino88
    Message was edited by: leino88

  • Incredibly slow internet, Connection drops.

    Well.. Posting here is pretty much a last resort..
    Background on what has happened:
    What i class as "acceptable" connection speeds for my phone line 4 - 6 mb.. This is the speeds i would achieve before i ran into any problems. 4mb through the day.. Sometimes ( not very often) 6mb early hours in the morning.
    Mid January 2014 - Broadband starts going incredibly slow.
    I'm talking 0.1mb connection speeds.
    So, i contact BT over the phone... Do all the tests and checks they tell you to do, problem persists, so i get elevated to a level 2 adviser. I get a call back from adviser, he does some magic with the exchange and my broadband speeds up.
    Speed achieved 2.5mb
    not quite the speed i used to achieve but certainly bare-able...
    February / March
    Exactly same as above, Internet slows down to a crawl, i contact BT, get elevated and it gets "fixed"
    Speed still sitting at around 2.5mb.
    May
    Parents inform me that the Internet is slow again and constantly disconnecting
    (They aren't very tech savy hence why i have been dealing with the problems)
    I start monitoring the connection allot closer, and notice that the connection is dropping quite allot in the evening.. I work evenings hence why i have never noticed this fact.
    After doing some research and diagnostics i notice the phone line is "Noisy". So i start monitoring this too. I find that this isn't always the case.. Some times its quiet other times you can bairly hear people on the phone for the noise (imagine someone crunching up a bag of crisps next to your ear, that's what its like)
    I Contact BT, quite frustrated that iv had the same problem 3 times now.. Tell them about the noise on the line, and an engineer is sent out.
    Engineer does all his tests in the house, "No problems" (The line was conveniently quiet while he was doing tests).. Just before he leaves i do a line test, and it perks up with some static, i let him listen.. He does his tests all over again, "no faults on the line"
    The Engineer then informs me, that in mid January when some work on a sewage pipe was being done right next to my telephone exchange, a line was cut.. I somehow dint think, for one second this is a co-incidence. From all my own tests and diagnostics this was the only explanation i had for the problems.
    He leaves, i contact BT again.. Get elevated to a level 2 adviser AGAIN.. he "fixes" it..
    Speed goes back up to 2.5mb
    About a week later this Problem happens AGAIN.. So i contact BT - And while I'm on the phone, the line is incredibly noisy and i say to the person on the other end that it is, so i get thrown across to a different department, who insist on sending an engineer out.
    Engineer comes out, does all the same tests that the first engineer did, line is quiet while he is here, i explain EVERYTHING to him.. He doesn't really have much of an explanation, tells me that the damaged wire from the sewage work was "fixed" And that 2mb is a good speed for how far i am from my exchange (maybe so, its still not the 4 - 6 i used to get though)....He decides to shimmy up the telegraph pole outside my house fiddles around up there and a couple of other things...
    After calling BT again, and getting elevated to a level 2 adviser (again) my Internet is "fixed"
    Speed Fluctuating between 2.5 and 3mb now.
    And here we are now.......Guess what? Internet is slow again...
    Iv noticed someone with a similar problem in another post, so.. Before you ask:
    Yes iv done all the tests, taken all phones out, tried a different micro filter, disconnected all other devices.
    My main socket doesn't have a test socket in it, so don't ask me to plug into it.
    ADSL Line Status
    Connection information
    Line state: Connected
    Connection time: 0 day, 00:01:04
    Downstream: 3,584 Kbps
    Upstream: 448 Kbps
    ADSL settings
    VPI/VCI: 0/38
    Type: PPPoA
    Modulation: G.992.1 Annex A
    Latency type: Interleaved
    Noise margin (Down/Up): 14.7 dB / 21.0 dB
    Line attenuation (Down/Up): 40.0 dB / 22.5 dB
    Output power (Down/Up): 19.4 dBm / 12.3 dBm
    FEC Events (Down/Up): 95 / 0
    CRC Events (Down/Up): 0 / 0
    Loss of Framing (Local/Remote): 0 / 0
    Loss of Signal (Local/Remote): 0 / 0
    Loss of Power (Local/Remote): 0 / 0
    Loss of Link (Remote): 0
    HEC Errors (Down/Up): 0 / 0
    Error Seconds (Local/Remote):
    0 / 0
    Event Log - (**Only showing wan don't think you need to see all the DCHP lease's etc**)
    This page summarises all the recent events that have been recorded on your BT Home Hub. You can filter the events to show items related to a specific category.
    Category
    WAN
    Recorded Events
    Time & Date Message
    00:03:55,10 Jun. WAN Auto-sensing detected port DSL
    00:03:55,10 Jun. WAN Auto-sensing last connection port: DSL
    00:03:53,10 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 connected.
    00:03:53,10 Jun. PPP IPCP Receive Configuration ACK
    00:03:53,10 Jun. PPP IPCP Send Configuration Request
    00:03:53,10 Jun. PPP IPCP Receive Configuration Reject
    00:03:53,10 Jun. PPP IPCP Receive Configuration NAK
    00:03:53,10 Jun. PPP IPCP Send Configuration Request
    00:03:53,10 Jun. PPP IPCP Receive Configuration Reject
    00:03:53,10 Jun. PPP IPCP Send Configuration ACK
    00:03:53,10 Jun. PPP IPCP Receive Configuration Request
    00:03:53,10 Jun. PPP IPCP Send Configuration Request
    00:03:53,10 Jun. PPP CHAP receive success: authentication ok
    00:03:53,10 Jun. PPP CHAP Receive Challenge
    00:03:53,10 Jun. PPP LCP Receive Configuration ACK
    00:03:53,10 Jun. PPP LCP Send Configuration Request
    00:03:53,10 Jun. PPP LCP Receive Configuration Reject
    00:03:53,10 Jun. PPP LCP Receive Configuration NAK
    00:03:53,10 Jun. PPP LCP Send Configuration Request
    00:03:52,10 Jun. PPP LCP Send Configuration ACK
    00:03:52,10 Jun. PPP LCP Receive Configuration Request
    00:03:50,10 Jun. PPP LCP Send Configuration ACK
    00:03:50,10 Jun. PPP LCP Receive Configuration Request
    00:03:50,10 Jun. PPP LCP Send Configuration Request
    00:03:47,10 Jun. PPP LCP Receive Termination ACK
    00:03:47,10 Jun. PPP LCP Send Configuration Request
    00:03:44,10 Jun. QoS Rate cap set to 0.4Mbs
    00:03:44,10 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 connected.
    00:03:43,10 Jun. DSL Link Up: Down Rate=3584Kbps, Up Rate=448Kbps; SNR Margin Down=15.1dB, Up=21.0dB;
    00:03:34,10 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 disconnected.[ERROR_NO_CARRIER]
    00:03:32,10 Jun. PPP LCP Send Termination Request
    00:03:31,10 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 disconnected.[ERROR_NO_CARRIER]
    00:03:31,10 Jun. DSL Link Down:the duration is 38211 seconds [1 : LosDetector]
    13:27:14,09 Jun. WAN Auto-sensing detected port DSL
    13:27:14,09 Jun. WAN Auto-sensing last connection port: DSL
    13:27:12,09 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 connected.
    13:27:12,09 Jun. PPP IPCP Receive Configuration ACK
    13:27:12,09 Jun. PPP IPCP Send Configuration Request
    13:27:12,09 Jun. PPP IPCP Receive Configuration Reject
    13:27:12,09 Jun. PPP IPCP Receive Configuration NAK
    13:27:12,09 Jun. PPP IPCP Send Configuration Request
    13:27:12,09 Jun. PPP IPCP Receive Configuration Reject
    13:27:12,09 Jun. PPP IPCP Send Configuration ACK
    13:27:12,09 Jun. PPP IPCP Receive Configuration Request
    13:27:12,09 Jun. PPP IPCP Send Configuration Request
    13:27:12,09 Jun. PPP CHAP receive success: authentication ok
    13:27:12,09 Jun. PPP CHAP Receive Challenge
    13:27:12,09 Jun. PPP LCP Receive Configuration ACK
    13:27:12,09 Jun. PPP LCP Send Configuration Request
    13:27:12,09 Jun. PPP LCP Receive Configuration Reject
    13:27:12,09 Jun. PPP LCP Receive Configuration NAK
    13:27:12,09 Jun. PPP LCP Send Configuration Request
    13:27:11,09 Jun. PPP LCP Send Configuration ACK
    13:27:11,09 Jun. PPP LCP Receive Configuration Request
    13:27:09,09 Jun. PPP LCP Send Configuration ACK
    13:27:09,09 Jun. PPP LCP Receive Configuration Request
    13:27:09,09 Jun. PPP LCP Send Configuration Request
    13:27:06,09 Jun. PPP LCP Send Configuration Request
    13:27:03,09 Jun. PPP LCP Send Configuration Request
    13:27:00,09 Jun. PPP LCP Send Configuration Request
    13:26:57,09 Jun. PPP LCP Send Configuration Request
    13:26:54,09 Jun. PPP LCP Send Configuration Request
    13:26:51,09 Jun. PPP LCP Send Configuration Request
    13:26:48,09 Jun. PPP LCP Send Configuration Request
    13:26:45,09 Jun. PPP LCP Receive Termination ACK
    13:26:45,09 Jun. PPP LCP Send Configuration Request
    13:26:43,09 Jun. QoS Rate cap set to 0.3Mbs
    13:26:42,09 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 connected.
    13:26:41,09 Jun. DSL Link Up: Down Rate=1536Kbps, Up Rate=288Kbps; SNR Margin Down=15.0dB, Up=6.0dB;
    13:26:32,09 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 disconnected.[ERROR_NO_CARRIER]
    13:26:31,09 Jun. PPP LCP Send Termination Request
    13:26:29,09 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 disconnected.[ERROR_NO_CARRIER]
    13:26:29,09 Jun. DSL Link Down:the duration is 830 seconds [1 : LosDetector]
    13:12:48,09 Jun. WAN Auto-sensing detected port DSL
    13:12:48,09 Jun. WAN Auto-sensing last connection port: DSL
    13:12:46,09 Jun. PPP IPCP Receive Configuration ACK
    13:12:46,09 Jun. PPP IPCP Send Configuration Request
    13:12:46,09 Jun. PPP IPCP Receive Configuration Reject
    13:12:46,09 Jun. PPP IPCP Receive Configuration NAK
    13:12:46,09 Jun. PPP IPCP Send Configuration Request
    13:12:46,09 Jun. PPP IPCP Receive Configuration Reject
    13:12:46,09 Jun. PPP IPCP Send Configuration ACK
    13:12:46,09 Jun. PPP IPCP Receive Configuration Request
    13:12:46,09 Jun. PPP IPCP Send Configuration Request
    13:12:46,09 Jun. PPP CHAP receive success: authentication ok
    13:12:46,09 Jun. PPP CHAP Receive Challenge
    13:12:46,09 Jun. PPP LCP Receive Configuration ACK
    13:12:46,09 Jun. PPP LCP Send Configuration Request
    13:12:46,09 Jun. PPP LCP Receive Configuration Reject
    13:12:46,09 Jun. PPP LCP Receive Configuration NAK
    13:12:46,09 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 connected.
    13:12:46,09 Jun. PPP LCP Send Configuration ACK
    13:12:45,09 Jun. PPP LCP Receive Configuration Request
    13:12:45,09 Jun. PPP LCP Send Configuration Request
    13:12:41,09 Jun. QoS Rate cap set to 0.3Mbs
    13:12:41,09 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 connected.
    13:12:40,09 Jun. DSL Link Up: Down Rate=416Kbps, Up Rate=288Kbps; SNR Margin Down=17.3dB, Up=7.0dB;
    13:11:47,09 Jun. WAN connection WAN1_INTERNET_B_ATM2_0_35 disconnected.[ERROR_NO_CARRIER]
    13:11:44,09 Jun. PPP LCP Send Termination Request
    13:11:43,09 Jun. WAN connection WAN3_TR069_INTERNET_R_ATM1_0_38 disconnected.[ERROR_NO_CARRIER]
    Next
    Software version V100R001C01B036SP05_L_B | Time & date 00:06 10/06/2014
    Speed test from - http://speedtest.btwholesale.com/
    1. Best Effort Test:
    Download Speed : 0.34 Mbps
    Your speed test has completed and the results are shown above, however during the test an error occurred while trying to retrieve additional details regarding your service. As a result we are unable to determine if the speed you received during the test is acceptable for your service. Please re-run the test if you require this additional information.
    So to summarise:
    Slow Internet
    Dropping Connection
    Noisy line

    In reply to imjolly
    I would try this belwire fix, but i have had broadband through this socket for about 8 years now, with no problems what so ever..
    So im automaticaly rulling out any sources of internal interference, as this would of already been a factor, and i wouldn't notice a sudden drop in speed.. 
    update:
    Todays Speed:
    ADSL Line Status
    Connection information
    Line state:
    Connected
    Connection time:
    0 day, 23:08:52
    Downstream:
    3,584 Kbps
    Upstream:
    448 Kbps
      ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    14.3 dB / 21.0 dB
    Line attenuation (Down/Up):
    40.0 dB / 22.5 dB
    Output power (Down/Up):
    19.4 dBm / 12.3 dBm
    FEC Events (Down/Up):
    197747 / 123
    CRC Events (Down/Up):
    3747 / 114
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    32212 / 84
    Error Seconds (Local/Remote):
    0 / 0
    Havn't noticed any Noise on the telephone, Proboly explains why my connection has stayed up for 23 hours now. 
    I will contact BT, have them send an engineer out, i might be lucky this time, and have a noisy line while he is here.. Seems to me thats what im going to have to keep doing

  • Unabl eto share Internet connection through Airport

    I have a new Samsung wave S8500. I'm trying to access the internet connection shared by my mac on the airport, everytime i try to connect to my mac through the Wi-Fi on my phone, it doesn't connect. I put a 40 bit WEP Key length on the sharing options. The airport can connect to my other phone which is a Nokia N97, the Samsung is able to connect directly to my friends Router(wi fi) and I'm able to use the net. I'm unable to pin point where the issue is.

    jdmein wrote:
    First, before I get into too much detail: Is it even possible to set up a WPA2 network directly from the iMac without a separate router?
    Welcome to Apple's discussion groups.
    Despite the fact that WPA2 encryption has existed for years, Apple hasn't seen fit to include that option in its "Internet sharing" feature.

  • Another slow internet connection via Airport Extreme wireless thread

    Has anyone actually solved this mystery? The last substantial thread I came across regarding this subject ended with a solution using a dell wireless driver. That ended somewhere in December. Any solutions, tips?

    I seem to have found a fix, thanks to Michael G. Noll (http://www.michael-noll.com/blog/2006/07/24/intel-imac-wireless-connection-slowd own-with-wpatkip/).
    I switched to WAP Personal from WEP and my iMac is now able to connect via wifi from a router in another room, and at normal speeds! Thanks Mike! I hope it lasts. I also changed my routers channel and made it static instead of automatic, but I don't think this had anything to do with the fix (though it may have solved my MacBooks problem of dropping the connection for a second every minute or 2).
    I still have the problem of having to manually select my network after start-up and wake-up, however. It does not turn on automatically.
    (Brand new Intel Duo iMac and 1-yr old Intel Duo MacBook)

  • If you have an Airport Extreme router and a slow Internet connection ...

    I know that Internet connection speeds are extremely variable, but I wanted to share this post for anyone having performance problems (very slow Internet connection speeds) while using an Airport Extreme router. This may or may not help you, but it might help someone.
    I have a RoadRunner Turbo account, and I was experiencing consistently slow Internet download speeds (an average of only about 300KB/sec). However, when I bypassed my router and connected my Mac directly to the Time Warner modem my download speeds were 6 to 8 times faster (up to about 2MB/sec).
    After weeks of tinkering and reading Apple documents I discovered that my Airport Extreme router had an improper setting. That setting is found under: Manual Setup -> Internet -> Internet Connection -> Ethernet WAN Port. When I was experiencing the very slow speeds, my Ethernet WAN Port setting was: '100 Mbps/Full Duplex.' To fix the problem I simply changed this to 'Automatic (Default).'
    This one change resulted in a huge, positive performance boost for me. I hope this post helps other people.

    You use an App like Filebrowser.  Details here:
    http://www.stratospherix.com/products/filebrowser/

  • Windows 7 Ultimate (64-Bit) fresh install, only WLAN and video driver installed but EXTREMELY slow internet connection...

    I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
    also with the WLAN connection. My ISP has checked their side and everything is fine.
    To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
    successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
    My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
    o/s to W7-Ult.
    Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
    Thanks in advance to all and for any advice.
    <script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
    tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
    isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
    if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

    Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
    machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
    Steam or the like causing interference.
    I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
    I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
    my Asus machine.
    <script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
    tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
    isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
    if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

  • Very Slow Internet Connection and Backups

    I have had a Time Capsule for some time now (1st generation) and it has caused nothing but headaches. I have put up with it for some time but I have a very slow internet connection and cannot leave Time Machine on or it bogs down my machine, so I only backup periodically. Specifics are provided below.
    I have a poor internet connection to begin with. When plugged in directly either to my modem or through Ethernet to the Time Capsule, I get download speeds of ~ 2.9 Mbits/sec download, 0.7 Mbits/sec upload. When connected over wireless, the speeds drop to about 0.6 Mbits/sec download, 0.6 Mbits/sec upload. I feel like I am working on dial-up. I have both a Mac and a PC, and speeds are the same on both, so it does not appear to be a computer issue. I have played with various settings in the Airport, including how connected (b-n or n only), DHCP settings, etc, but nothing makes a difference. Any suggestions?

    Welcome to the discussion area, bigbrianb!
    Have you downloaded a utility like iStumbler to get a look at the signal strength and noise on your wireless network?
    iStumbler will display most of the other wireless networks around you, so you'll have an idea of the competition for unused channels. Ideally, you want your network to be on a channel that is at least 4-5 channels away from any other network to minimize the chances of wireless interference. Is that the case there?
    Your signal strength should be 50% or greater and noise less than 10% for a good quality connection on your network. Is that the case there?
    There are more things to test, but this will get things going.

  • Internet connection via Airport Extreme/router thats not working, why?

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

  • Sharing Ethernet Connection Through Airport

    Is it possible to share your Ethernet connection through airport so that two computers can connect to a single connection without the need of a wireless router? I know that this is possible on XP, but I am somewhat new with OS X and cannot seem to figure it out. Does anyone have any suggestions?

    Open the Sharing preference, click on the Internet tab, select the connection to share from the drop down menu, then check the ports that will share the connection.
    You will find additional info by selecting Mac Help from the Finder's Help menu and searching on the appropriate term.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Due to slow internet connection, I cannot update my iphoe to new version 5. Is there any shortcut

    Due to slow internet connection, I cannot update my iphoe to new version 5. Is there any shortcut where I can update my iphone to new version quickly

    If your computer's connection is slow then you can update your iOS from your phone.
    Find a free, strong Wi-Fi network.
    Go to Settings>General>Software Update>choose option "Download and Install"
    Benefit: if you update phone through this method the actual download size will be only 30 to 50 MB only! and it works fine! if you try to download iOS from iTunes it will goes around 800MB.

  • Unbearably slow Internet connection using WDS network

    We have an old Airport Extreme (saucer, 802.11b/g) and an Airport Express (802.11n, b/g compatible). We're using the Extreme as a WDS main, and the Express as WDS relay. Wireless devices that connect to the Internet in our house include a MacBook Pro, a couple of iPhones, an iPod Touch, an XBox 360, and a PS3.
    None of these wireless devices are in direct line of sight to the main base station. Typically, our connection to the Internet is decent for the XBox, which has almost a clear line of sight to the relay (Express) base station. On the other hand, the connection for the MacBook Pro, iPhones, and iPod, is extremely slow. Maybe the actual connection speeds are the same for all devices, but at least for the XBox online gaming works. (Haven't tried online gaming with the PS3 yet.)
    The problem that compelled me to post this thread is the slow Internet connection to our MacBook. When our MacBook Pro is moved from its usual location to a place just a few feet away from the Extreme, download speeds are satisfactory (e.g. 10,000+ kbps measured using Speakeasy.net). However, when we sit farther away from the Extreme and are only a few feet from the Express, download speeds are dismal (200-300 kbps). The Internet connection is noticeably slow; web pages load like molasses, and watching streaming video is almost impossible. Upload speeds are usually about 7-10x faster, which is kind of strange.
    Airtunes is off. We've tried setting up the Express base station as a WDS remote instead of relay, no difference. Allow wireless clients is turned on for both main and relay. Channel 1, WPA2 personal security.
    Part of the problem may be due to the fact that our house is steel framed so, depending on location, the frame of the house may get in the way of our wireless network. But even if the MacBook is within 2 feet of the Express with NO walls or obstacles in between, the speed remains dismal. The line of sight from the Extreme (main) to the Express (relay) is impeded by a few obstacles but little in the way of walls.
    However, if the MacBook is close to the Extreme, with good speeds, then I walk away and sit near the Express, I still get good download speeds. This lasts only a short time. Also, if I turn off Airport on my MacBook Pro and turn it back on again, speeds are back down right away.
    I understand WDS cuts the bandwidth down substantially, so I decided to unplug the Express and just use the Extreme station, set to create a wireless network instead of participate as main in a WDS network. When I do this I get satisfactory speeds on the MacBook Pro, even sitting at a location where I used to get the slow speeds.
    So at first I thought forgetting about WDS completely would seem to be the solution to the problem. That seems to be true for the MacBook, but when the Express is offline and the Extreme is the only base station, the XBox and PS3 now are the devices with a very poor connection to the Internet, as there are 3+ steel framed walls between the base station and the devices. When the WDS network is up, the XBox and PS3 are almost in direct line of sight to the relay station (but then I lose speed on the MacBook and other devices.)
    I'm trying to find a solution that allows a good speed connection for all these devices. Right now I have to choose between a regular network with a good connection for my MacBook, or a WDS network that allows gaming but appears to be worthless for the MacBook.
    Your assistance is most welcome.

    I'm trying to find a solution that allows a good speed connection for all these devices.
    The solution is to run an Ethernet cable from the LAN port on the AirPort Extreme base station (AEBS) to the AirPort Express (AX). Then you won't need to use WDS and you won't suffer the bandwidth penalty of WDS. Then you would configure both the AEBS and AX to create a wireless network using the same SSID (network name) and wireless encryption type/level/password. The AX should be configured to act as a bridge (not sharing a single IP address).

  • Slow Internet connection sharing on Macbook Pro

    Hi all,
    I am experiencing really slow internet connection sharing via the airport from a second machine directly. I can access the internet or web pages with excellent reliability however the download/upload speed is 20KB/s at best. If I use the Macbook Pro itself I can get up to 250KB/sec. I read that this seems to be common problem with Snow Leopard. Can someone shed some light on this?
    Thanks

    "... I read that this seems to be common problem with Snow Leopard..."
    Can you shed some light on where you read this?

Maybe you are looking for

  • Footer overflow in dynamic table

    Hi, great forum here.. so i have a  problem with livecycle form... I build up a form with a dynamic table, adding rows with a click on "+". The footer is working correctly ( once visible on the end of the table, not repeated) . One cell in the first

  • Unmarshaller failed error starting weblogic 9.1

    I am getting the following exception when starting weblogic 9.1. Any advise on how to resolve this will be appreciated. ####<Sep 22, 2006 4:16:51 PM CDT> <Notice> <WebLogicServer> <usea-purwars1> <aircoreserver> <main> <<WLS Kernel>> <> <> <115895981

  • Error in Infosource, transfer rules transportation

    Hi I transport the datasources from R/3-DEV to R/3-QA systems . And those are transported successfully. Then i replicated the datasources from R/3-QA system to BI-QA system. Now im trying to tranpsort the InfoSource, Transfer rules from BI-DEV to BI-

  • Numeric type source field

    Hello. I try to make one of my source field as integer. I use XSD Schema and I've already tried all of xsd numeric data types  (like Integer, int, short , byte) - In all cases in Import manager I get always "Text" type. Dmitry

  • IPhoto - Exclaimation Point!

    I have thumbnail photos in my I photo Library...when I click on some of the thumbnails...they open slightly and then go dark with a big exclaimation point instead of the picture. What does this mean? Oregon Duck