Increment Progression Points not update Grade/Step Progression

Dear,
We are on r12, Without using Grade Ladder.
Right now we have setup all configuration like grad, Rate, pay scale, Point values and grad step and points, also attache with employee but when we run request increment there is not move to the next grade steps.
Thanks

Hi Gaurav
Just solve the problem->
I was doing this in my api: P_EFFECTIVE_DATE => TO_DATE(L_CUT_OFF,'DD-MON-YYYY')
So I removed the date format: P_EFFECTIVE_DATE => TO_DATE(L_CUT_OFF) then it worked.
What a misguiding error it gave!!!!!!!!!!!!!! for invalid primary key
Regards
- Saira

Similar Messages

SCCM 2012 SP1 Distribution points not updating

The package that holds my MS updates is not updating on my distribution points ever since I upgraded to SP1. If I remove the package from the distribution points and then add it back it will work fine. This is happening to me every I add updates to this
package. Below is part of the smsdpprov.log file from one of my distro points.
[C90][Thu 02/14/2013 11:03:51]:Content 'f16906f8-d1d4-44df-8cf7-35dd7428893a' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:03:55]:Content '1ebc4751-063f-46dd-a7ae-096cce3545dc' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:03:56]:Content 'b2903470-59e0-4d89-a1a5-808b58c9fd4e' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:03:58]:Content 'f058ee07-a66e-4bdf-8a53-7cc30affe333' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:00]:Content '03546ec3-2613-46ce-bf0c-a6064149f2c6' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:03]:Content '7492e432-b69c-478c-8c7b-7c2396302eb4' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:05]:Content '995a1a82-6d7c-4fb6-9e1b-8cfac070b787' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:06]:Content 'a0a2a75d-beab-49ca-96e5-e03afa98dc8f' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:08]:Content '21061204-1d54-4262-bc90-cf5922191940' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:11]:Content 'ce9e07ad-1467-4da5-bf03-8c7013743d34' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:14]:MoveFile failed for \\?\C:\SCCMContentLib\DataLib\6178f7ae-a640-4e04-a851-abd13239a50f.ENS00006.temp to \\?\C:\SCCMContentLib\DataLib\6178f7ae-a640-4e04-a851-abd13239a50f
[C90][Thu 02/14/2013 11:04:14]:FileRename failed; 0x80070005
[C90][Thu 02/14/2013 11:04:14]:CContentDefinition::Finalize failed; 0x80070005
[C90][Thu 02/14/2013 11:04:14]:Failed to finalize content '6178f7ae-a640-4e04-a851-abd13239a50f' for package 'ENS00006'. Error code: 0X80070005

I've got the same issue. When I look at the smsdpprov.log on the distribution point, this is what I see.
[EB0][Thu 10/31/2013 08:39:08]:Content '0a3fe62c-58ce-47c7-b635-e23407515ecb' for package 'ONB0007A' has been added to content library successfully
[EB0][Thu 10/31/2013 08:39:08]:Content '809b4727-78b3-48bd-85ca-f2fdcf668297' for package 'ONB0007A' has been added to content library successfully
[EB0][Thu 10/31/2013 08:39:08]:MoveFile failed for
\\?\E:\SCCMContentLib\DataLib\5263454e-e3de-49e5-a077-48dba0eefe93.ONB0007A.temp to
\\?\E:\SCCMContentLib\DataLib\5263454e-e3de-49e5-a077-48dba0eefe93
[EB0][Thu 10/31/2013 08:39:08]:FileRename failed; 0x800700b7
[EB0][Thu 10/31/2013 08:39:08]:CContentDefinition::Finalize failed; 0x800700b7
[EB0][Thu 10/31/2013 08:39:08]:Failed to finalize content '5263454e-e3de-49e5-a077-48dba0eefe93' for package 'ONB0007A'. Error code: 0X800700B7
If I reboot the DP, then the package gets updated. I'd like to figure out how to make this not happen :)

Points Not Updated

HI,
Every day the contest points gets updated under BPM category, but today the points are not yet updated.
Thanks & Regards
PavanChand

>
Florin Wach wrote:
> h1. Now I understand!
>
> why we get so many low-profiled posts that sometimes even may appear as beeing free from any skill .. just for the sake of posting in that particular Forum.
>
> I wish there'd never be a top-30-/-50-/... list of contributors (or even point systems), at least I hope there'll never be that kind of game anymore.
>
> Your's
> Florin
I support point system, as it gauges individual contribution.
Top 3 for a year is good enough as you need to be consistent (making sure you are up to the mark or skilled to dodge moderator/mentors , both not easy ).
And quality of forums is affected not because of this yearly contest instead its the Top 3 for last thirty days at the top of forums.It has its own pros and cons ofcourse.

Progress meter not updating

I have an application that needs to send a query out to a website, retrieve the response, parse out the response, and save the results in a table. To give the user an idea of the progress, I have a progress meter that uses the to-be-processed record count
as the total count and a variable that I increase by one on each iteration as the basis of the progress meter.
This is all pretty basic stuff, but after anywhere from 50 or 60 to a few hundred iterations of maybe 3000 entries, the progress meter simple stops progressing. Windows then thinks the application is not responding, and users' initial response is to
kill the task. If I just leave it alone, however, it will eventually complete and pop up my MsgBox that comes up on completion.
This is nothing new; I have another application that has to import several thousand files from a network drive, importing each to a table housing temporary data, then analyze/process the data and create permanent records in another table. While each file
might take upwards of half a second to process, that still adds up to 10 minutes for 1200 records. Again, the problem is that the progress meter seems to stop somewhere early in the process, and all I can do is wait for a while to find out if it
completes.
I tried repainting on each iteration, but to no effect.
So...how does one run a busy, repetitive process like this without Windows coming to the conclusion that the application is not responding. O course it is not responding to Windows--it is busy doing what the developer told it to do, and that did not
include pausing so the user can ask if it is still running. And how can I ensure that the progress meter refreshes on each and every iteration (even if it has to slow down or pause processing long enough to repaint at least the progress meter)?

I tried repainting on each iteration, but to no effect.
Hi Brian,
Yes, Bruce is right!
You need a DoEvents in every loop that increases the current counter.
Imb.

Indexed field num_comments on blog post not updating during incremental crawl

Hi,
Have a webpart that rolls blog posts from MySite and other Team sites.
Everything works fine excepts that the property ows_numcomments (which I have a managed property mapped to) is only updated after a full crawl has run (ie once per night or manually started).
Why is it so and what can I do to make updating during an incremental crawl?
Thanks,
/Owe
Background:
Query resulttype is RelevantResults
TrimDuplicate is true
MPNumComments is mapped to ows_numcomments
Searchstring
"SELECT Title, Author, Path, SiteTitle, MPNumComments, MPPublishedDate FROM SCOPE() WHERE scope='Blogs' AND contentclass='STS_ListItem_Posts' ORDER BY MPPublishedDate DESC";

Can you do full crawl and check this property is getting updated. If not then either incremental crawl is not updating the value or there is some problem with the field configuration.
Regards,
Milan Chauhan
LinkedIn
|
Twitter | Blog
| Email

OOB Approval Workflow does not update WorkflowStatus column as "In Progress"

Dear Experts,
Any advice will be most appreciated. Here is the scenario
Repository: document library
Workflows: OOB Approval Workflow is turned on
User Action: User uploads multiple documents (say 5 or 10) to the document library
the workflow status column is not marked as "In Progress" for some of the documents. Out of say 10 documents, 6 to 7 have "In Progress" in the workflow status column and the remaining 3 to 4 don't have it!
It is very critical to have this field updated.
Alternatives: Currently it seems like the only way to update the blank workflow status column is to delete the document and re-upload it.
Solution tried: Tried turning off "Update Content Approval" option in the workflow settings. No use.

I've found out more about this. The workflow itself starts, but the workflow status column does not get updated as "In Progress" or "Approved". Its just blank.
Whats even more interesting is that it fails if the web app's port number is 80 (URL in this case will be http://server_name/doc_lib)
but it works perfectly if the port number is anything other than 80! (URL in this case will be http://server_name:port_number/doc_lib)
Any clues as to why it behaves this way?
Thanks in advance,
NP

Step progression not inserting row in Jobdata panel

I am trying to research step progression in Peoplesoft 9 & did all the setup.I can see the employee in review wage progression page with Approved status.As the final step, i ran HR_WP_ADV App Engine. .But is not inserting row into jobdata & giving error "Cannot Job data CI for employee 'emplid' ".
Any help please!!
Thanks

Thanks for the reply.
The Project was in version 11.1.3 before I migrated. I had the issue above so I migrated to 11.1.1.4 then to 11.1.1.5 then to the New GREAT 11.1.2 to go by the matrix of support The issue is still there.
Basic Page layout:
SEARCH-MASTER-PANELTABBED LAYOUT (Hold all the CHILDREN RECORDS)
PANEL TAB is made of ; SHOW DETAIL ITEM- PANEL COLLECTION- TABLE.
the panel collection has a toolbar with 2 buttons in it.
My issue varies:
Hit create insert==> record count goes up one but the table does not render (it goes all blank even if records existed in it)
Hit undo budo ==>table still not rendering. (click next on master record then click previous to come back, the table renders correctly.)
other tables do the following:
Hit Create insert == > table shows normally and I can enter new record.
Hit undo ==> table count goes down but table does not render at all anymore.
for this issue i noticed if i set cache results to false the table works after hitting undo
IF I CREATE A NEW SHOW DETAIL ITEM and put exactly what the other tabs have in them and use the same layouts and buttons the new table works great!!!!!!!!!!!!???????????????????? WTF?!?!?!?!
NO ERROR MESSAGES even at finest level are thrown.
I HAD NO ISSUES IN THE PREVIOUS VERSIONS OF JDEV IS THIS A JSF 2.0 BUG????
BY THE WAY JDEV 11.1.2 sometimes CRASHES or Hangs when viewing the Binding of Page when you click on Binding straight from the Design view. I have to open the Binding Page separate to view it. FYI
Edited by: Nottallah on Jul 11, 2011 9:48 AM
Edited by: Nottallah on Jul 11, 2011 9:51 AM

When attempting to install "Software Update" from Apple, the process talls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

When attempting to install "Software Update" from Apple, the process stalls at "Configuring Installation". Even allowing it to run for 24 hours does not result in any progress.

Thanks for the straightforward tip. I had restarted once already, but the second time was a charm. The install button now works. Don't know if it mattered, but I also repaired disk permissions and then restarted in safe mode this time.
The printer driver is apparently a different issue in itself. It turns out that the my printer, the HP Deskjet F380, has some fluke that makes it incompatible in 10.6. A new driver is coming out from HP according to Rickmeister in this thread: http://discussions.apple.com/thread.jspa?messageID=10076690&#10076690
In case anyone else has the same problem with the F380: Like the user in the aforementioned thread, I downloaded and installed the old HP drivers for 10.5, and now at least I can print in the meantime.

HT1222 I am trying to do software update but it just say (waiting...) and nothing happen ! I try to restart the computer and shut down the computer but it won't let me pointing out to me that software updating is in progress.What should I do? Help please

I am a new IMac user trying to do Software Update but it just say (waiting) but nothing happen! I try to restart and shutdown the computer but it won't let me by leting me know that I can't shutdown or restart the computer while software updating is in progress.Please Help!!

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Measuring point/document is not updating

Dear all,
I am new in PM. I have one issue over here.Measuring point/document is not updating automatically after production order confirmation via co11n . I tried with following steps
1) Created the equipment as (P)Production resources/tools -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
2) Then i have assigned this equipment as a PRT in the routing of material .
3) Production order confirmation via co11n Each unit
Which steps i am missing. if u give me steps by steps procedure to me for counter based maintenance, its helpful for me.
STILL not answered and no reply.
I am waiting for reply.
Thanks
tarun
Edited by: tarun on Oct 5, 2010 5:06 PM

Hello,
Have look this thread [Re: Auto Update of measuring point/document;
Regards,
Rakesh

Preloader progress bar not move in IE, but move well in Firefox

I have been in this problem for several days. I really got
frustrated about it. Pls. anybody can give me some help.
I created a general preloader using movieClipLoader object
and draw a progress bar using movieClip. I set the progress bar's
progress by setting bar_mc._x = percentage, and created as a swf
file. when test it , it works well, when open it using firefox, it
still work well, can show the gradual progress in the bar, but if I
using IE 6 or 7 to open it, it will not show the gradual progress ,
just jump from 0% to 100% after the whole file is completely
loaded.
I saw a note about progress bar not show graduate progress in
Flash Player 9, so I uninstall it and install Flash Player 8 again,
it is still like that.
I really don't know what 's the problem. Could any friends
give me some suggestion or idea, that will be greatly helpful.
Thanks.

Have you contacted Project VII support or searched their knowledge base?
http://www.projectseven.com/support/index.htm
Also, is there any way to remove unused styles (in an external CSS) in DW? Just it would be a pain to go through and remove the styles I've tried, but then later decided not to use.
Not exaclty a DW answer, but I've used the free FireFox add-on to help me find unused selectors. Point it to a sitemap.xml and it can spider the whole site (as listed in that xml file).
https://addons.mozilla.org/en-US/firefox/addon/5392
But be careful with it. It apparently doesn't read JavaScript and your PMM triggers are actually used.
Mark A. Boyd
Keep-On-Learnin' :-)
If you are reading this via email, be aware that it may not be an accurate representation of my message. Login to read the actual message and/or to reply.

My points are not updating

Hello Experts,
my points are not updating. 3 months before the points were auto updating but its not updating now. I dont know what went wrong. Could you pls suggest what shall I do to update the same.
Thank you & BR
Venkat...

I have checked your reputation tab.
Everything is fine..
Your Reputation - Expertise is exactly shows as per your lifetime points.
You have sum of you expertise equals to 133 points.
And you got 1 point for the badge First Step.
Go to your Reputation - Expertise http://scn.sap.com/reputation.jspa?username=venkateswarlu.ravula&viewID=places
You will get more details for your point earn and loss.

Every time I try to close iMovie 10 it says "tasks that are currently in progress will not be completed"?

I upgraded to Mavericks and then updated iMovie to the latest version (10?). I opted to let it upgrade my projects and events and these are now available in the new iMovie, but every time I try to shut it down, I get a dialogue box saying "tasks currently in progress will not be completed", what tasks? What is it doing- does anyone know?
Also is it true that after letting it upgrade/update your events and projects, you can delete the old iMovie projects and events folders (to save space)?

I have the same question regarrding tasks in progress. The program seems very sluggish compared to the previous version.
Where is the old iMovie projects and events folder located (folder name)? I would like to save space also or at least move to an external drive and have them as a backup if needed.

Deployment Status - In progress - Successfully installed updates

Patches have recently been deployed to our workstations and I am getting the following results.
Can anyone explain why I get the "Successfully installed updates" under In Progress, yet when I look under Compliant the machines are not listed. Does this mean that they have received some of the packages in the deployment but not all?
I am confused because if I run the report "Computers in a specific compliance state for an update group (secondary), then the machines listed under Successfully installed, appear in the list, so to me that suggests they are compliant???

Notice the "last status time". Information in the console almost always lags behind the actual state of clients and deployments. This information is summarized on a periodic basis. Reports are always your best source of up-to-date and accurate info.
Jason | http://blog.configmgrftw.com

[svn:fx-trunk] 8086: ASDoc updates for download progress bars

Revision: 8086
Author:   [email protected]
Date:     2009-06-23 07:22:19 -0700 (Tue, 23 Jun 2009)
Log Message:
ASDoc updates for download progress bars
QE Notes: None
Doc Notes: None
Bugs: -
Checkintests - passed
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/DownloadProgressBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/SparkDownloadProgressBar.a s

Increment Progression Points not update Grade/Step Progression

Similar Messages

Maybe you are looking for