Incremental R&R Backup Does Not Finish Neatly

Using Rescue and Recovery 4.21.0016.00 running WinXP Pro w/SP3 on my G41 TP,
when an Incremental Backup completes a little window comes up with the message:
"Finalizing the backup, please wait.", but it stays there and stays there forever and I
must use the Task Manager to kill it.
Maybe it wouldn't stay there "forever", but it was still there at 10 AM this morning for
a small Incremental Backup done at 5 PM last evening. When I do a Full Master
Backup the same window appears, but just for a few seconds.
Killing the process responsible for the window and message doesn't seem to affect the
quality of the backup . . . I recently did a full restore that included several incrementals
that had experienced the same unwillingness to quit nicely, and the restore apparently was
successful. It must do its "finalizing" and just forget to hang up.
Bob Stockler
G41 - 2886-5TU - Mobile Pentium 4 532 - 3.06 Gh
2 Gb RAM - 80 Gb Toshiba 5400rpm HDD - Win XP Pro
Solved!
Go to Solution.

I did another incremental backup yesterday evening, and R&R reported that the backup
had completed the backup successfully, but it didn't take down the little window that said
"Finalizing the backup, please wait...". I had to use the Task Manager to get rid of it.
Bob Stockler
G41 - 2886-5TU - Mobile Pentium 4 532 - 3.06 Gh
2 Gb RAM - 80 Gb Toshiba 5400rpm HDD - Win XP Pro

Similar Messages

Rescue and Recovery: Backup does not finish.

I very recently updated my Rescue and Recovery, now it runs version 4.21.12.0. When I do a backup, it does it just fine, but: After a message that the backup was done successfully, a message comes with a rotating hourglass, saying: "Finalizing backup, please wait..." This message stays forever and only goes away when I kill "Rescue and Recovery" with Windows' Task Manager. This did not happen with the previous version of Rescue and Recovery.
a) Does killing the Rescue and Recovery program at this point affect the actual backup files in a negative way? Or are they just fine, this being just a "cosmetic" problem"?
b) Is this my problem somehow, or a programming bug of Rescue and Recovery that should disappear with the next release?
Thank you for your help,
Wolfgang

hi there,
I have the same question as well. Just like you, I went to the task Manager, it states 'rescue and recovery running', then I did a right click, and go to its proces, I found out that the corresponding file "MsgBox.exe" have 00 value under CPU; and constant 6,496k under physical mem usage for hours, so I assumed that it will bea message box bug and shouldn't affect the backup dat. But again, I am not 100% sure. Guess i might wait for the answer as well.

HT201250 what do you do when your backup does not finish?

What do you do?

Is that because you have insufficient space? Are you using an external HD for your Time Machine?
For the best guidance on anything to do with Time Machine see ...
Pondini FAQ
Or http://pondini.org/TM/ Troubleshooting.html

Syncronizing my 3gs with itunes the sync does not finish because itunes allways crash and stuck i made some troubleshoots like reinstall again but nothing and my itunes is update and the system is windows vista home premium.Please help me...

Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
Please help me.

I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
You asked what I meant about saving the installer on your PC.
When you go to the iTunes download page:
http://www.apple.com/itunes/download/
And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts.

Import From CSV File statement runs forever, no error, does not finish

Hello,
I am trying to import a CSV file in a JAVA program, with the following statement:
IMPORT FROM CSV FILE '/debug/testdatabase/FILE.csv'
INTO "JOSEPH"."TEST_TABLE"
WITH COLUMN LIST IN FIRST ROW
RECORD DELIMITED BY '\n'
FIELD DELIMITED BY '\t' ERROR LOG '/debug/testdatabase/file.err'
THREADS 10
BATCH 10000
I have two HANA instances on different machines A and B:
Both machines run HANA version 1.00.74.00.389160 (NewDB100_REL), while the OS is
SUSE Linux Enterprise Server 11.1 on machine A and
SUSE Linux Enterprise Server 11.2 on machine B.
The statement above runs fine on machine A and the rows are imported properly from JAVA as well as when executed from HANA Studio SQL console.
If I copy the file to machine B and try the exact same statement with the same file, it does not finish (neither from JAVA nor from HANA Studio SQL console). There is no error either. It cannot be cancelled, only a HANA restart stops the statement. Also the sample file I use has only 2 rows, and memory does not seem to be a problem.
I seem to have a similar problem to the one described here, but the answers there do not help me: http://scn.sap.com/thread/3396582 I specified the record delimiter, and I used a python script to check for any strange characters that are not supposed to be there, but didn't find any.
If I copy the file to my windows PC and use the "File Menu -> Import -> SAP Hana Content -> Data from Local file" function, it imports the file correctly into B, but I need to be able to do it from JAVA.
Machine A administration view:
Machine B administration view:
If you have any idea what might cause this behavior or where I can find more information on this problem please give me a hint.

Hi Joseph,
First from the pics, the revision of your SAP HANA instance is 73 instead of 74. Since I have no identical environment, I cannot test it for you. But can you try the simplest scenario? You can create a table with only one column table try to import a CSV file with only one row.
Best regards,
Wenjun

Itunes attemots to download a movie, it says it is processing, but it does not finish, it is now "processing" for days, what can I do to stop it?

Itunes attemots to download a movie, it says it is processing, but it does not finish, it is now "processing" for days, what can I do to stop it?

Download movie with iTune (computer) and sync to iPad.

SEM_APIS.BULK_LOAD_FROM_STAGING_TABLE does not finish

Hi all,
I am trying to bulk load an N-Triples file using a staging table according to instructions given in documentation (RDF Semantic Graph Overview).
The file contains about 23,000,000 triples, and I have split it in 16 files of 1,437,500 triples, in order to load them in parallel.
First I successfully load these files into the staging table by invoking the following command, which needs about 1 minute to finish:
BEGIN
SEM_APIS.LOAD_INTO_STAGING_TABLE(
    staging_table => 'STAGE_TABLE'
   ,source_table => 'STAGE_TABLE_SOURCE'
   ,input_format => 'N-TRIPLE'
   ,parallel          => '16');
END;
Then, I call SEM_APIS.BULK_LOAD_FROM_STAGING_TABLE to load data into the semantic store:
BEGIN
    SEM_APIS.BULK_LOAD_FROM_STAGING_TABLE(
        model_name => 'rdfmodel',
        table_owner => 'rdfuser',
        flags       => 'PARSE PARALLEL_CREATE_INDEX PARALLEL=16 MBV_METHOD=SHADOW',
        table_name => 'stage_table'
END;
However, this operation does not finish. I left it running for more than 5 hours and not any triple is inserted into the table mdsys.semm_rdfmodel.
Also, I have observed that even if PARALLEL parameter is set the most CPUs remain idle. Usually, only one or two CPUs are used to a percentage more than 50% (I check it using htop).
Any hint about how I can find out what goes wrong will be very appreciated!
Best regards,
George

Hi Souri,
thank you for you advices!
I enabled parallel dml but the results are the same. I, also, created the RDF$ET_TABLE and it seems that the events that do not finish are FIND_AND_RESOLVE_BATCH_DUPS and -find_BATCH_DUP_SELECTIONS.
To find unfinished events I posed the query:
SELECT DISTINCT proc_sid, event_name, start_time, end_time, start_comment, end_comment
FROM RDF$ET_TAB
WHERE end_time IS NULL
ORDER BY start_time ASC;
and the results are the following:
PROC_SID
EVENT_NAME
START_TIME
END_TIME
START_COMMENT
END_COMMENT
M1_16B08_6F40B1F_68
*BULK_LOAD_FROM_STAGING_TABLE
06-FEB-14 12.02.43.669541 AM
M1_16B08_6F40B1F_68
FIND_AND_RESOLVE_BATCH_DUPS
06-FEB-14 12.06.57.878441 AM
[P1=[PARALLEL(RDF$2LM1_16B08_6F40B1F_68,16)]
P2=[PARALLEL(RDF$TLM1_16B08_6F40B1F_68,16)]
P3=[PARALLEL(RDF$BDM1_16B08_6F40B1F_68,16)]
P4=[PARALLEL(RDF$BSM1_16B08_6F40B1F_68,16)]
Px=[PARALLEL(x,16)]
Py=[PARALLEL(y,16)]]
M1_16B08_6F40B1F_68
-find_BATCH_DUP_SELECTIONS
06-FEB-14 12.06.59.969255 AM
I suppose that these events are about duplicates. So, I thought that adding the flag DEL_BATCH_DUPS=USE_INSERT to the sem_apis.bulk_load_from_staging_table call would help. I added this flag and retried. The storing, again, did not finish after 5 hours but the results of the query for the unfinished events are slightly different:
PROC_SID
EVENT_NAME
START_TIME
END_TIME
START_COMMENT
END_COMMENT
M1_16B047841AF37_68
*BULK_LOAD_FROM_STAGING_TABLE
05-FEB-14 07.32.05.582389 PM
M1_16B047841AF37_68
LOAD_BATCH_TRIPLES_TABLE
05-FEB-14 07.35.24.297935 PM
[nP=[0]
P1=[PARALLEL(RDF$TLM1_16B047841AF37_68,16)]
P2=[PARALLEL(st,16)]]
Best regards,
George
Message was edited by: 28f0f31d-f7f8-4fcd-a737-4d97bf31ab13

Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4

Hi Guys,
Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4.I'm running the installer from a local drive and also noticed that the uninstaller files are not created.The installer process has been running for 4+ hours.
Any suggestions/tips?
Thanks
Manoj

hi John,
we left the installer running overnight, but the install process has still not completed.Also it has not created any uninstaller files under the following directory:
E:\APPS\Hyperion\uninstall
what could be the reason for that?
Thanks.
Manoj

Exchange 2010 "event id 403/401 The physical consistency check" Backups does not work...Critical!!

Hi,
At this moment our backups does not work. We have two error on the event viewer;
Exchange 2010 sp3 version 14.03.0158.001
We have only one server Exchange 2010 with two databases for users...
Event id 401;
Instance 1: The physical consistency check has completed, but one or more errors were detected. The consistency check has terminated with error code of -106 (0xffffff96).
Event id 403;
Instance 1: The physical consistency check successfully validated 629126 out of 1110272 pages of database '\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy33\exchangedb\global\global.edb'. Because some database pages were either not validated or failed validation,
the consistency check has been considered unsuccessful.

Hi Javier,
From your error description, I recommend you do the following steps for troubleshooting:
1. Please run CHKDSK and restart server.
2. Run a Database level Mailbox repair request.
What's more, here are some useful threads for your reference.
Create a Mailbox Repair Request
http://technet.microsoft.com/en-us/library/ff625221(v=exchg.141).aspx
Database Backup Failing with Event ID 2007, 9782, 401, 403, 254
http://social.technet.microsoft.com/Forums/en-US/4c8eccbf-435a-43ef-b3f6-0de5096413ee/database-backup-failing-with-event-id-2007-9782-401-403-254?forum=exchangesvravailabilityandisasterrecoverylegacy
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

System Administration Operations Scheduled Backups does not appear in ACS 5.0.0.21

Hello!
I want to do shedule backup. According to user guide:
You can create a scheduled backup only for the primary instance. To create, duplicate, or edit a scheduled
backup:
Step 1 Choose System Administration > Operations > Scheduled Backups.
But System Administration > Operations > Scheduled Backups does not appear in ACS 5.0.0.21.
How can i do backup ?

Hi Alexander,
Could you please confirm on which link you found these instructions?
It looks like these are the instructions from the ACS 5.1 user guide, but on ACS 5.0 we don't have a similar option.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Icloud backup does not work after installing ios7

I installed ios7 and now my icloud backup does not work. When I connect to iTunes i can back up my phone on my computer, but when I change the option to icloud it gives me an error message. Please help

Please, provide some details. May be some configuration is reseted, password? What error do You see?

Differential backup failed because old backup does not exist

Hi,
We scheduled the backups of TFS through the TFS Administration console.
* Full each sunday at 18:00
* Differnetial each evening at 22:00
* Transactional each hour
* rentention time 8 days
The differential back-ups of Monday (20-4) and Thuesday (21-4) did go well. But for some reason the differential of Wednesday and Thursday didn't work out.
Start of log file of 21-4:
[21-4-2015 20:00:00] [Info] Requested Backup Job: Differential
[21-4-2015 20:00:00] [Info] -------------------------------------------------------------------
[21-4-2015 20:00:00] [Info] Jobs Requested: Differential. Completed:None. To Run:Differential.
[21-4-2015 20:00:00] [Info] RunDifferentialBackupJob
[21-4-2015 20:00:00] [Info] Scanning configuration for new DBs
[21-4-2015 20:00:00] [Info] BackupSettings changed ? False
[21-4-2015 20:00:00] [Info] Starting differential backups
[21-4-2015 20:00:00] [Info] Database Tfs_Configuration parent is 9859022596859328236
[21-4-2015 20:00:00] [Info] Starting Differential Backup server:RDSQL11\TFS database:Tfs_Configuration filename:\\RDSQL11\Backup$\Tfs_Configuration_9859024468858452975D.bak
[21-4-2015 20:00:00] [Info] BACKUP DATABASE [Tfs_Configuration] TO DISK = N'\\RDSQL11\Backup$\Tfs_Configuration_9859024468858452975D.bak' WITH DIFFERENTIAL, NOFORMAT, NOINIT, NOSKIP, REWIND, NOUNLOAD, STATS = 10
[21-4-2015 20:00:01] [Info] Backup Complete for database Tfs_Configuration
On 22-4 the log looks like this:
[22-4-2015 20:00:00] [Info] Requested Backup Job: Differential
[22-4-2015 20:00:00] [Info] -------------------------------------------------------------------
[22-4-2015 20:00:00] [Info] Jobs Requested: Differential. Completed:None. To Run:Differential.
[22-4-2015 20:00:00] [Info] RunDifferentialBackupJob
[22-4-2015 20:00:00] [Info] Scanning configuration for new DBs
[22-4-2015 20:00:00] [Info] BackupSettings changed ? False
[22-4-2015 20:00:00] [Info] Starting differential backups
[22-4-2015 20:00:00] [Info] Database Tfs_Configuration parent is 9859022596859328236
[22-4-2015 20:00:00] [Info] Starting Differential Backup server:RDSQL11\TFS database:Tfs_Configuration filename:\\RDSQL11\Backup$\Tfs_Configuration_9859025332862172100D.bak
[22-4-2015 20:00:00] [Info] BACKUP DATABASE [Tfs_Configuration] TO DISK = N'\\RDSQL11\Backup$\Tfs_Configuration_9859025332862172100D.bak' WITH DIFFERENTIAL, NOFORMAT, NOINIT, NOSKIP, REWIND, NOUNLOAD, STATS = 10
[22-4-2015 20:00:00] [Error]
Exception Message: Cannot perform a differential backup for database "Tfs_Configuration", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option.
BACKUP DATABASE is terminating abnormally. (type SqlException)
SQL Exception Class: 16
SQL Exception Number: 3035
SQL Exception Procedure:
SQL Exception Line Number: 1
SQL Exception Server: RDSQL11\TFS
SQL Exception State: 1
SQL Error(s):
SQL Error[1]: System.Data.SqlClient.SqlError: BACKUP DATABASE is terminating abnormally.
    Class: 16
    Number: 3013
    Server: RDSQL11\TFS
    Source: .Net SqlClient Data Provider
    State: 1
    Procedure:
    Line Number: 1
Exception Data Dictionary:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.EvtSrc = MSSQLServer
HelpLink.EvtID = 3035
HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
So this is the same parent and the the file is still present on disk.
Can someone point in a direction to solve this issue?
Thanks!!

Hi RemkoP,
Based on your description, you can check whether you have a full backup file in your backup folder. Differential backups are backups of the changes that have occured since your last full database backup. If there no full backups, then we cannot perform a
differential backup.
You might do a full backup for the database, then do the differential backup. If you have any other concerns, please elaobrate more details about your scenario and reproduce steps.
Best regards,

Hp laser jet p 1102 w , downloaded driver does not finish the installation

hp laser jet p 1102 w. Problem with installing new printer.
The downloaded driver, and the one included with the new printer does not finish the job of installing the software.

Hi @allanR ,
I can help you with setting up the printer, but I will need to know some more information.
How would you like to setup the printer, through a USB connection or Wireless?
What operating system are you using? (Windows 7, Mac 10.10)
Please be specific, the steps can be different, depending on what you are using.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
Print a configuration page to get the printer's IPv4 address if networked and also to test the printer's functionality.
Printing a Configuration Page. Were you able to print the test page, do you have a IPv4 address? (what are the first 3 sets of numbers)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

BW statistics cube load does not finish

Hi Friends,
The BW statistics cube 0BWTC_C04 does not finish load for hours in the first run. It will be in running status. When we delete the request by forcing the status to red and run the load, it finishes sucessfully in minutes. It is happening for last 2 months daily. Any clue why this is happening and how to correct it?
Thanks and regards,
Balaraj

Hi Arun,
Thanks for reply.
We are dropping and recreating the indices everytime we load. We are doing this through Process chain. We did drop the cube (deleted all the data) and reloaded, after 2nd run again the issue appeared.
Any suggestions?
Thanks and regards,
Balaraj

In IPhoto, after I submit my book to the Apple store, it shows it uploading, but does not finish the process.

after I submit my book to the Apple store in I photo, it shows that it assembles and uploads, but does not finish the process. I cannot use the cancel button and have to force quit IPhoto to get out of the process.

Assuming you're referring to iPhoto on your Mac here are some potential fixes you can try:
1 -
Go to the System/Sharing preference pane and make sure Remote Apple Events is checked. If it is, uncheck it and then recheck and try ordering again.
2 -
Quit iPhoto.
From the Finder menu bar, choose Go > Utilities to access your Utilities folder (or press Shift-Command-U).
In your Utilities folder, open Keychain Access.
Find the "NetServices" entry in your Keychain Access window.
Select the "NetServices" entry and press the delete key.
Reopen iPhoto and attempt to place your order again.
You should be prompted to enter your account information if you deleted the Keychain entry successfully.
After entering your account information, you should be able to complete your order.
3 -
Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try ordering from there.
Note: Create a proof pdf file of the book as described in this Apple document, iPhoto, Aperture: Previewing an order in iPhoto or Aperture, before ordering the book and keep the pdf file to compare with the printed copy when it arrives.

Incrementa​l R&R Backup Does Not Finish Neatly

Similar Messages

Maybe you are looking for

Incremental R&R Backup Does Not Finish Neatly