InD 6 file color different in Acrobat

I set my color profile in Bridge so all programs in CS6 sync. Images I build in Pshop (RGB 6x9@300 res) retain color when imported into InD.
If I export the InD file as jpg, image also retains color. But when I export same InD file as PDF, the color shifts slightly. This is not always this noticeable.
But in this attached sample, you can see more of a purplish blue than in the InD window file. I can send the client the jpg with more accurate color.
But I should be able to do same with a PDF, in case they prefer a PDF.
The inset box shows the pref color setting in Acrobat.
How can I get Acrobat color to match InD and Pshop?

if I could find an 8 version
I think you want to be careful about trying to avoid a fairly benign bug by installing old software. You maybe seeing the monitor profile bug, but it could also be the assigned profiles interacting with the chosen simulation profile in AcrobatPro.
If you want to include RGB objects in a print workflow it's essential that all of the RGB objects have embedded profiles—you would never want DeviceRGB (RGB without a profile). So whatever version of AcrobatPro you use check the RGB profiles via Acrobat's Output Preview>Object Inspector.
The best way to ensure that the correct profiles are included is to use the PDF/X-4 preset. Here in InDesign I can see that a sample RGB image has AdobeRGB embedded via the Links panel—it's not DocumentRGB:
If I export to PDF/X-4, Object inspector will show the image as RGB with the embedded AdobeRGB profile when I click on it. The preview however depends on the Simulation Profile. Here I have it as the CMYK output intent, but I could also choose Abobe RGB and get an RGB preview:
If you don't use the PDF/X-4 preset it would be possible to lose the embedded profile (depending on your settings) and that would cause both an output and a softproof problem. You don't want DeviceRGB:

Similar Messages

InDesign files automatically openning in Acrobat Pro 9.0

I just upgraded to CS3.3 Premium w/Acrobat Pro 9.0 from CS2 and now my ind files automatically open in Acrobat 9.0. Ind files all have the Acrobat 9.0 icon, which I went into properties > opens with to change (ie. program files > Adobe > InDesign CS3) and Windows will not accept the change. Actually when I click "ok" no error message appears, but 'opens with' still shows Acrobat Pro 9.0.
It gets wierder. If I go into properties and change 'opens with' to the IND short cut on my desktop, it changes, however when I attempt to open a ind file I get the error message 'file is not a valid Win32 program.'
I am running XP Media 2005 SP2, on an HP desktop, with an AMD 64 2.4 duo, 4 gigs RAM.
Any else have a similar issue?
Thanks, Anton

Anton,
I to had this problem just today and could not find any good help on file associations. I am running XP Pro on Windows. I uninstalled CS2 and still had CS3 on the computer. All associations for InDesign, Illustrator and Photoshop went away. The only information I could find did not work.
This is what I did and it worked. I opened Control Panel, then File Options, and then the tab "File Types". I scrolled to the INDD extension and highlighted it. Then I chose the Advanced Tab, selected "new", typed in "Open" for the action and selected the InDesign.exe file. All Indd files associated with InDesign CS3.
I also repeated the same to get the AI and PSD files to associate.
I hope this is the right way to make the change, no guarantees, but so far it is working. Even CS and CS2 file versions show the CS3 logo and open correctly.
Dee

PDF displays differently in Acrobat 8 to 7 or 9?

An external supplied PDF exported from Indesign CS4 all fonts embedded was imported into Prinergy and refined. If the Prinergy PDF is opened in Acrobat 7 or 9 it looks like the original and the Prinergy PDF is dropped onto a hotfolder and printed out on a Xerox printer with a Level 3 rip it looks fine.
If you open the PDF in Acrobat 8 one of the fonts is corrupt. We created a Scitex CT file, proofed the Scitex CT file, the font proofs as being corrupted. Creating a Prinergy VPS shows the font as being corrupt.
Any ides on why Acrobat 8 display the PDF differently to Acrobat 7 and 9? All version of Acrobat are fully patched and we have tested on several computers.
Regards
Denis

The files are not secured. Some of the files are part of a pdf portfolio, where the portfolio is a mixture of pdfs created/scanned in 8 and pdfs created/scanned in X and combined into a pdf portfolio by X. The troubled X files are not visible in 8 as standalone files or as files inside the portfolio. Some of the files have never been combined into a portfolio and are not visible to 8.
It does not happen to all of the scans. Some scans done by X are visible in 8 and others are not, even though the scan settings used are the same. Strangely, all of the files, whether visible in 8 or not, are visible in X. The lack of visibility in 8 occurs across multiple machines using 8, not just one machine, and the same pattern occurs across multiple machines running 9.
I have examples of the files, but they contain private information. One such file is two pages. It is a standalone file, not a pdf portfolio. The second page is visible in 8, but the first page is not; both pages are visible in X. If I delete the second page (confidential information) and post the file, will the second page be visible by any means?
Additionally, the file pages are enormous to print even though they were scanned at 400 dpi, color, jpeg2000, jbig2 (lossy), deskew on, background removal off, descreen on, text sharpening, low. The first page was 63.7 MB to print and the second page was 97.2 MB to print. The entire file is only 1913 KB.
Do you think that I have a bad install and should just uninstall and reinstall?

Printing different/selective files with different copies

Hi everyone,
I've been working on finding a solution, on how to print different pdf files with different copies, without opening the pdf-files.
Task:
I have a folder, with 25 pdf files
I want to make a php overview, of the folder
At the end of each line/file - i would like to add a number for the copies
In the end, I would like to simply press print - and every document ive added a number/copies to - are being printet...
I guess I need to use PrintPDF - but does anyone know any pre-made program/function - that could handle the "copies" part...?
I hope someone can help me out,
Thanks
Jan

Well, i had hoped that the acrobat could open silent - eventhough they've removed that feature in the newer versions.
Even though the program would open - if the amount of copies was added - and i just hat to press print - it would ease the job alot.

Lightroom displays colors differently than Photoshop

Lightroom (and my image previewer - IfranView) display my image colors differently than photoshop. This is very disturbing (why can't Adobe make this simple!)!
Image in question - see below. Center image is Photoshop, left is Lr 4 and right is InfranView.
Colorspace: AdobeRGB 1998
Image color (exported the TIFF file in Lr, what is shown below): AdobeRGB 1998
NOTE: when I export out as sRGB, IfranView displays it correctly (I don't know why, it can't display ProPhoto correctly, but never had a problem with AdobeRGB). Lightroom looks incorrect when viewing the TIFF, AdobeRGB JPEG and sRGB JPEG.
What is going on?? I've tried this on two computers now and it is the same problem!

The larger file is Adobe RGB and the smaller file is sRGB. I see no difference in overall tone or color between the two files in LR 3, LR 4, LR 5, PS CS5, PS CS6, PS CC 2014, or Windows Photo Viewer which is color-managed, aside from an almost imperceptible change in the darkest blacks which I'd expect since you're converting AdobeRGB to sRGB at some point.
I can make the Adobe RGB one look like it does at the left of your first screenshot if I Assign Profile: sRGB to it in PS.
Since your monitor appears to be wide-gamut and therefore similar to Adobe RGB, I think the problem you're having is that LR thinks the monitor is sRGB for some reason, perhaps due to your switching the cables from one computer to the other without rebooting and recalibrating. It's also possible that your profile is stored in the monitor rather than in the computer and one computer understands this and the other doesn't so you're getting double-profiling or no profiling occurring.
It sounds the your only issue is having two computers attached alternatively to one monitor without having a valid profile on each computer for that monitor and aren't restarting each computer to load that profile. At least that is my analysis given the limited information.
I would conclude that nothing is wrong with LR or PS just the hardware connections and the color management confusion between the two computers, not your confusion, the computers'.

The way Aperture renders my Nikon RAW (NEF) files look different than...

The was Aperture renders my NEF files looks different than NX...
Ok so I use all the in camera setting/tools to the best of abilities to try and cut my editing down as much as possible but when shooting RAW I end up having to tweak every images to get them back to what they really look like... I shoot often RAW and JPG combined and when I open a NEF in NX and a JPG in PS they are identical and need very little work, when I use Aperture the NEF files are very different looking from the JPG (or NEF in NX) and every single one needs tweaking (I get more redish/pinkish skin, often a hint of green cast to (slightly off WB/tone thing) and more contrast.
Below is screenshot showing the difference between a JPG (or NEF in NX) and a RAW file in Aperture
[img]http://www.pbase.com/ray645/image/120052970/original.jpg[/img]
This is just a silly snap shot in very flat overcast light, and has the least amount of shift or difference of any image type so far, when I use strobes, shoot for a more contrasty image, gel for color and manual WB the differences are huge almost to the point that you would think you where looking at two completely different images and not the same NEF opened in different software.
How do I go about getting Aperture to render my NEF's more like what I shot like NEF in NX, JPG in anything, and even the back of the camera screen?

Thank you, that seems like will work, just having the boost turned down a bit on import has helped tremendously but I cant stop feeling like I am moving towards the "Fix it in post" mentality
I will need to get better at tweaking my images... No matter how I try I cant kill the pinking skin or the very faint green glow in blond hair or bright neutral tones without affecting other areas of the image.. I am sure I will figure it out but anyone having any tips or links that could speed up my process I would appreciate it.
The green is weird its like someone snuck a small florescent light into all my shoots without telling me, not major but enough to be annoying.
I shoot a ton of motor sports (3000 images a weekend) and shoot JPG and have gotten good at using in camera pre sets, knowing what I got and getting it right in the camera, I wish Nikon would give up the code or whatever is needed for all the info to be carried over to Aperture..... I would pay the $100 or whatever to use the NX engine in Aperture

Ingesting AVCHD footage without MODELCFG.IND file

I am trying to ingest footage from a Sony HD11 via log and transfer from a copy of the camera's directory structure. Problem is that the MODELCFG.IND file is missing from the directory structure.
I was always of the opinion that this file was essential but I have another copied directory structure also missing this file which I have been able to ingest. I have also just read that you can ingest directly from the AVCHD folder within the master folder.
Can somebody clarify this for me? If I am am unable to ingest (even without the MODELCFG.IND file) does this suggest that the video files are corrupted? Or is there a work-around?
Thanks.

Yes it does, I also messed around with it last night. The clips import very quickly since they aren't transcoded, and playback from the "events" view was very smooth with no frames dropped. Even with some realtime effects applied (like auto-enhance, color correction) the playback was still mostly smooth with minimal frames dropped.
The same clip played back from the timeline though was very choppy; but not using much CPU either. I think it may depend a lot on the GPU and my Mac Mini only has the HD3000, but with the quad core 2.0GHz i7. So I think you still need a fast GPU in order to effectively edit AVCHD or it will be annoying.
Those hiccups shouldn't appear in the final exported output, but I was unable to get that far since iMovie ran out of memory during the export to file (and I have 16GB ram!)

How to reduce a PDF file size under Adobe Acrobat Reader DC. The size is now 23MB; I need it to be less than 4MB. thanks

how to reduce a PDF file size under Adobe Acrobat Reader DC. The size is now 23MB; I need it to be less than 4MB. thanks

I've found in Pdf's many time when you go to Optimize a PDF and look at the font list there are often up to a 1/2dozen copies of a given font, say Helvetica, then that many Helvetica Bold, or Arial or Ariel Italic
What I do ie remove from list all but one copy of each different font. often dramatically reduces the size. also something lese is Flattening images will in some cases reduce a file size. I have run into a case where it actually made a PDF Larger.

Safari shows colors different than other browsers and GoLive

Does anyone know why Safari shows colors differently than Firefox, Explorer and Opera, Mozilla and Golive?
For example if I use "websafe" colors in photoshop with 2.2 gamma and sRGBie...2.1 and save, then import into Go Live with the working space the same, North America Web/ Internet, the colors are typically darker, although occasionally they are the same.
I have tried embedded profiles and non embeded.
The difference only happens when I view the page in Safari. By the way I use a mac, GoLive CS2
This is a constant frustration. I have created several tests but have found no satisfactory results. I am in the process of creating a website for teachers who use powerbooks and safari. And this color change really restricts creative possibilities. If the same page is viewed in Firefox it looks like it does in GoLive.
Thanks for any help,
Kevin

>> When no profile is in use.. Safari will assume sRGB becaus this is the web standart profile...
True on Windows Safari and other Windows browsers.
Safari on Mac and other Mac browsers 'assumes, assigns, applies' the Mac's default monitor profile to untagged color.
This is easy to proof here in the sRGB rollover:
http://www.gballard.net/psd/go_live_page_profile/embeddedJPEGprofiles.html
If Mac Safari 'assumed' sRGB on untagged files, then the sRGB rollover will have zero change.
+++++
>> converting to sRGB before saving for the web ensure god color in all browseres, and JPG and PNG can be savde with color profile
Except in Mac browsers that have 1.8 monitor gamma profiled.
The Mac-specific problem with trying to match tagged graphics on matched-color background in Safari is:
1) The color background is untagged and will Assume default Monior RGB.
2) The tagged graphic will be Converted to Monitor RGB.
In other words, if you fill a page with 4bb93c and place a tagged sRGB image, filled with 4bb93c, the two colors won't match up in color-managed Mac web browsers like Mac Safari...however, if you untag the sRGB file, it will disappear on the page, but it will be off color depending how close Monitor RGB is to sRGB profile in Mac browsers.
Windows, on the other hand is a different beast, it Assigns sRGB to untagged color, so tagged/untagged sRGB will be good in all Windows browsers.
At least that is what I have seen here on my Windows Vista Business box.

Archiving file in different folder in sender file adapter

Hi,
I have a requirement in witch i have to pick 7 different file from seven different folder.
for this I am using advance selection tab and defining all the other folder path.
but my problem is I have to archive the different file in different folder .
For exm..
/folder1/file1.txt need to be archive in /archive_filder1/file1.txt
/folder2/file2.txt need to be archive in /archive_filder2/file2.txt
/folder3/file3.txt need to be archive in /archive_filder3/file3.txt
can any one tell me that how to define the dynamic archive folder path??.
regards,
Navneet

Hi Navneet
In File Access parameters --> Target Directory
Use this type of Directory name
\XIDEV_STORES\%store%\sapoutbound
here %store% will be changed accordingly
e.g. if file will come for store 001 then this %Store% will be replaced by 001 and file will be placed in this 001 folder and if file will come for store 002 then this %Store% will be replaced by 002 and file will be placed in this 002 folder over FTP.
For to achieve this Go to Advanced tab
For Variable Substitution check mark Enable
Now speciofy the parameter values for Variable Name and Reference
Under Vriable name specify = store
Under Reference specify = payload:WP_PLU02,1,IDOC,1,EDI_DC40,1,RCVPRN,1 -
You have to give full path name here that where this store variable is located into IDOC.
Hope this example will help you
Regards
Dheeraj Kumar

Where can I find a macro I can use in Project Properties to generate PDB files of different filenames each build?

Found a better solution. The answer is given at the very bottom of this post.
I'm looking for $(Random), %(Date), %(Time), or some %(Value) that I can put in the "Generate Program Database File" entry.
Like "$(TargetDir)_%(CreateTime).pdb".
But the problem is, %(CreateTime), %(ModifiedTime), and %(AccessTime) has colons in them, making them useless when putting them into the filenames.
What other ways can I generate PDB files of different file names? Or, how do you modify %(CreateTime) so that I can remove the colons and just obtain the numeric values?

Hi Tom_mail78101,
It seems that there is no built-in macro for renaming the PDB files randomly.
You could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio
The Visual Studio product team is listening to user voice there. You can send your ideas/suggestions there and people can vote.
I agree with Viorel. The possible way to rename the PDB files is that you write your own script to rename the PDB file after building the project and put the script to Post-Build event in Build Event. As for whether this way can accomplish it, you can try
to consult on: MSBuild
forum like this thread: https://social.msdn.microsoft.com/Forums/vstudio/en-US/bcf39fd6-0e0c-4486-9438-7a724ded44de/postbuild-event-command?forum=msbuild
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How to load and unload more than one external swf files in different frames?

I do not have much experience on Adobe Flash or Action Script 3, but I know the basics.
I am Arabic language teacher, and I design an application to teach Arabic, I just would like to learn how to load and unload more than one external swf files in different frames.
Thanks

Look into using the Loader class to load the swf files. If you want to have it happen in different frames then you can put the code into the different frames.

How ATTACH multiple files from different folders in one ATTACH 'session'?

Hi,
In Mac Mail, I often have to attach 2 or 3 separate files, all from different folder locations on my hard drive.
This requires clicking attach, selecting file 1 and clicking OK, which closes the Attach dialog.
Then I have to do it again 2 times for each other file. oy.
Is there a way to Highlight multiple files in different directories (ala Command-Select...which doesn't work) before selecting OK?
OR
I've found that I can DRAG a file from the Attach dialog into the email and the dialog will remain open, only the file is HIGHLIGHTED in the email and , hence, gets replaced by the next file I drag into the email (or select by the normal method)....
Is there a way to drag that file#1 into the email and have it NOT remain highlighted, so that I can pick another file to add in addition to that one?
Thanks!

ShizzleFizzle wrote:
Is there a way to Highlight multiple files in different directories (ala Command-Select...which doesn't work) before selecting OK?
Have you tried dragging files from Finder windows into the mail message window?

Multiple jar files from different locations

Hello,
I am having an applet that access code from two different jar files. Of them one is a common jar file for many applets. So I couldn't place it in the local dir as that of the applet's html. I am not using any web server.
     Just to give you a feel of it :
     <PARAM NAME = archive VALUE = "DVApplet.jar,DVVP.jar" > are the jar files my applet is dependant on. But DVVP.jar has to be accessed from a dir different from local dir.
     Will be glad if someone can throw some light on accessing different jar files from different dirs.
     Thanks for your time.
Regards,
Anantha

[url=
http://forum.java.sun.com/thread.jsp?forum=421&thread=425724&tstart=0&trange=100
]This question is a bit similar
You can use a class loader to do such things.

InD 6 file color different in Acrobat

Similar Messages

Maybe you are looking for