IND CS2 SCALE STROKE ISSUE

I am trying to scale a vector object pasted into CSIN2 form Illustrator CS2. I get an error message saying "requested operation would cause one or more objects to be too small. Please check whether the stroke is to large". There is no stroke at all on the object. I get this error message if you try to scale up or down the object. However if you actually apply a stroke, then scale, it works. What's going on?

I ran into this as well some time ago, and found that if you select the object in InDesign, and in the "Transform" panel choose "Redefine Scaling as 100%", you should be able to scale the object without issue. If you select it with the Selection Tool (black arrow) and that doesn't work then try it with the Direct Selection Tool (white arrow); one of them will do the trick. Since this issue is very remote--it only happened to me that one time--I can't remember which tool I used. But if you try both, that should work.
Good luck!
-Mikey

Similar Messages

  • CC 2014 Scale Stroke Issue

    I've noticed that the scale stroke feature works fine, except on a compound path.
    A standard stroked box, when doubled in size, doubles the stroke...
    If you make that same shape a compound path, when doubled in size, quadruples the stroke.
    This does not happen when enlarging the piece with the bounding box, but it does when using the transform panel.
    Any ideas as to how to avoid this from happening?

    Here is a video of the bug, in case any Adobe employees are listening:

  • Is there any way to set "Scale stroke"

    does the document have a property that can be set to true or false for scale stroke? I didn't see it in the documentation, maybe there is another way?

    please consider marking your postings as "answered", of course if you get a satisfactory answer that is. It helps other users having similar issues, and helps others trying to help you.
    now to your question, the way to do it is using [,changeLineWidths]

  • Why doesn't Photoshop CS5 automatically scale strokes and effects?

    I am looking everywhere for why Photoshop CS5 doesn't automatically scale strokes and effects. I could've sworn there was a preference in CS4 but there's nothing resembling this in CS5. Driving me crazy!
    Whenever I do a Free Transform, the effects are completely out of whack and force me to waste time resetting them individually, layer by layer. I used to be able to grab any object or group of objects, do a transformation and Photoshop automatically recalculated. If anyone has a tip on how to avoid the annoyance of having to go layer by layer and forcibly adjusting that would be great.

    Layer style effect setting are in absolute pixel size values so if you change the scale of a layer the style size remains the same. You can edit the layers style effects after tou do a transform on the layer and change the absolute setting. If the layer has been rastersized or flattened you can not. I have request that Adobe add support for relative settings like inches, cm, mm etc which is relative to the documents dpi resolution. This would be very helpful for recording actions. 
    However photoshop can scale existing layer style for you when you use Image Size there is a check box.  If you need to scale a single layer and have its style scaled you need to do it in a round about way. Convert the layer to a smart object. Then instead of using transform double click on the layser smart object icon in the layers palette.  Photoshop will open that layer embedded smart object in Photoshop for you to work on it.. Use Image Size to resize the layer up or down in size and check resample constrain and the scale style check box.  Then use menu File>Save.  Photoshop will then update the embedded smart object in the smart object layer and you can close the document Photoshop opened for you to work on the smart object.

  • Bapi Error:Quantity and / or " delivery completed ind. Or final issue ind.

    Hello Gurus
    We are working on BAPI:bapigoods_mvt_create with movement type 103, for goods receipt when we execute program am getting this error message "Quantity and / or " delivery completed ind. Or final issue ind. " will you pls help me to over come this error.
    Thanks in advance
    Madhava

    Hi,
    You are posting good movement for quantity 0.
    SAP can accept zero goods movements if this meant for setting up the delivery completed indicator.
    So either quantity should be entered or delivery completed indicator should be ticked if qty is zero.
    Check the quantity you are supplying for this bapi.

  • Scale Strokes & Effects in Photoshop CS5

    The Scale Strokes & Effects-option used to reside in the Preferences dialog box.
    Seems like it has been removed in CS5, anyonene know why, or where a simmilar function
    may be found?
    Thing is, when i add a Stroke (Layer Effect) to a layer, the thickness stays the same when I
    transform/resize(ctrl-T) that layer. I really need the border to shrink accordingly as shown in
    the image below.
    A workaround would be to convert the layer to a Smart Object, but when working with all too many
    layers, it's more about saving time.

    Don't remember seeing such an option in Preferences. You are getting confused with Illustrator.

  • Stroke issue when changing size of vector.

    When I have made some objects I want to change the size of them and shrink them down but when I do this the stroke stays the same and I have to alter it manually. Is there a way so that I dont have to?

    General Prefs. Check Scale Strokes & Effects.

  • IND CS2 to PDF transparency mode?

    Hi Folks,
    I thought I set up an RGB doc in IND but I keep getting this message when
    trying to create a small size pdf preview doc:
    "document's transparency blend space doesn't match the destination color
    space in Export Adobe PDF settings. To avoid color appearance changes...
    Change transparency blend space or destination color space..."
    Problem is, I cannot find the doc's transparency blend space, so I don't
    know what is conflicting.
    Thanks
    Jeff
    ~~~~~~~~~~~~
    Jefferis Peterson, Pres.
    Web Design and Marketing
    http://www.PetersonSales.com

    On 5/28/08 11:40 AM, in article [email protected], "Mike<br />Witherell" <[email protected]> wrote:<br /><br />> Did you look for Edit > Transparency Blend Space > RGB or CMYK?<br /><br />Thanks folks. <br />IND CS2 is my only app still at CS2, since it wasn't an option with the web<br />space upgrade to CS3.<br />But I was able to sync my color space with Bridge.<br />I recently got a colormunki photo, so I've been trying to learn how to apply<br />it for color consistency...<br />So far, print isn't coming out so hot, but the fault may be in my lack of<br />synced color space...<br />Jeff <br />~~~~~~~~~~~~<br />Jefferis Peterson, Pres.<br />Web Design and Marketing<br />http://www.PetersonSales.com

  • IND CS2  running slow of late

    Hi all,
    Just wanted to know if anyone had noticed if their IND CS2 was running slower of late, especially if you were running on a 2 x 2.8 Quad-Core Intel with 4GB of Memory on OS 10.5.5.
    Not sure if there are solar flares out there, but my IND CS2 has been chugging today, crashed twice, and doesn't respond to force-quitting the applications. All these with restarting the machine. Short-cut to jumping to pages is exceptionally slow, and the files are not image intensive.
    Running Mail, Safari, iTunes (for iPhone), Cyberduck, Suitcase Fusion, iChat, Address Book in the background...
    Any ideas? Thanks.

    I know... I actually run CS3 most of the time and will be upgrading to CS4 shortly. There are some jobsand clientsthat insist on CS2, and rather than down-saving constantly via INX, it's sometimes simpler to just knock out the files in CS2... CS2 was ok on the Intel, slow but ok up to a couple of days ago... it's just gone on the skitz now.

  • Is there a way to temporarily disable "Scale strokes & effects"?

    I want to be able to scale some charts without changing the stroke size. But I don't want this preference permanently changed. Is there a key to hold down so that when I enlarge the charts that the stroke size stays the way it is? Thanks...
    julie

    Julie,
    Why go to the preferences?
    I suggested your using the Transform palette flyout and tick/untick Scale Strokes & Effects there.
    And you can scale up using the Transform palette by adding *2 and *2.5 in the W or H box and Ctrl/Cmd+Enter, so you can keep everything there.
    It also has the easy option of deciding where to scale from by selecting the relevant Reference Point.

  • "Scale Strokes and Effects" option should be more accessible

    "Scale Strokes and Effects" should be moved outside the Preferences panel to the Options Bar. Whether I want it on or off depends entirely on the type of work I'm doing at the time. It is not a "set it and forget it" type of option.

    If you're using Illustrator CS6, this option is available right in the Transform panel (earlier it used to be available only in the flyout menu of this panel). This has also been added to the Transform Effect dialog.

  • Stroke issues Illustrator CS3

    Hello,
    When i give outlined text in illustrator CS3 a stroke of 0,1pt it seems like
    the stroke is put on in an angle (like its done with a brush)
    Expanding the stroke makes the problem even clearer.
    This problem seems to become less when i boost the stroke to 0,15pt.
    Opening the same document in CS2 gives no problems at all.. the stroke works as it should do.
    Any ideas on this?
    thnxs!!
    G5 PPC 2,5GHz dual 1,5Gb ram
    Mac OsX 10.4.11
    CS3

    TomWardrop wrote:
    On a side note, Illustrator CS3 has to be the buggiest adobe application I've ever dealt with. It has so many little annoying bugs, most of which are fixed in CS4. I shouldn't have to pay for an upgrade to CS4 just to get bugs fixed though, that seems wrong.
    You must not have used version 10.
    As for the outline issue... try Object > Flatten Transparency

  • Photoshop CS2 and windows issues! help!

    Hi, I'm working with someone who is having issues with Adobe Photoshop CS2 among other Adobe problems.  The problem is that after Photoshop is loaded, the interface is very messed up.  You can't open a file because if you go to menu -> file nothing happens.  If you try to create something new, most of the buttons will be invisible in the option for sizes.  The program simply becomes unusable.  After a restart, the program will work properly for a short period of time and being to behave oddly again.  On loading Photoshop, windows gives an error beep but the program loads anyways and no error window comes up.  This happens on illustrator as well as indesign.  I have uninstalled everything and removed all shared files that adobe uses and reinstalled everything from scratch, the same problem happens.  This only started happening recently.
    OS is XP pro SP3.
    I am about to wipe the computer and start from scratch but I would rather not have to do this if there is another solution!
    Please help!  Thank you!

    No, it's a standard U.S. keyboard and the language is set to english.  I believe the software is up to date. 
    It doesn't freeze when you click on the menu, it just refuses to pop open a window when you try to open a file.  Also, many of the option boxes in some of the windows in photoshop are invisible.  This only happens after the computer has been on for a short while.  Right after a reboot, you can open photoshop fine... until it stops working.

  • IOS Wallpaper Scale/Zoom Issue Returns in iOS 7.1

    Is anyone experiencing the photo zoom/scale for wallpaper issue again where they cannot fit scale down the photo subjects to fit into the iPad's frame?
    This used to be fixed by turning off the Parallax effect via Settings > General > Accessibility > Reduce Motion ON
    However, it seems like Apple has broken it again.
    Can anyone else confirm this? I just tried changing wallpaper on iOS 7.1 and cannot get the photo to fit as if I was looking at it from the Photos App.

    Nope, it's broken for me.   Images with resolutions much larger than the iPads native resolution won't scale down.  You can easily scale up, just not down.  It's very aggravating that this remains an issue in 7.1
    And, I'm sick of hearing people say it's working when it doesn't.  It's not just my device.  I've confirmed it on numerous devices new and old, iPhone and iPad.    Not being able to scale an image down when you could prior to iOS7 is not "better".   Losing capability is not "better". 

  • Photoshop CC 2014 Paths and Stroke Issues

    Hi!
    The first issue:
    When i'm copying factor path and paste on a new layer it creates a vector mask instead of just placing vector shape, is there any solution on how to disable it? In 2013 version and older it just worked.
    And the second issue:
    I work with very tall documents and when I make any changes to any shape's stroke PS just moves me to the center of the document. It's really annoying. Any solutions?

    factor path
    Auto correction can be a tricky thing, huh?
    When i'm copying factor path and paste on a new layer it creates a vector mask instead of just placing vector shape,
    Do you mean a plain Path?
    I suppose you could select/create a Path in the Paths Panel or deselect the Layer in the Layers Panel.

Maybe you are looking for

  • Apple Software Update hangs on Windows 7.

    Even after uninstalling iTunes & Apple Software Update, downloading and installing the latest iTunes, still Apple Software Update hangs, see pic: There is no freeze, but the spinning icon keeps on spinning forever unless the process is killed ('stop'

  • Creating a .swf in InDesign, is there anyway to export it into a more compatible format?

    I am not sure if the above question is actually what I am asking.  I created a training module using a ton of these .swf files in InDesign.  The .swf files don't line up with the timeline so they can't be paused, fast forwarded or controlled in anywa

  • Infoset query with KNB1 customer's ADRC information

    Hello, An explanation into the problem: I'm trying to create an infoset query with KNA1, KNB1 and ADRC which would do the following: In KNA1-SORTL we hold customer numbers which can be found from KNB1. This query should: Display KNA1-KUNNR and releva

  • Interactive Reporting Dashboard Template

    Hi All, As part of next assignment we would like to develop Interactive Reporting Dashboards. I'm very new to Interactive Reporting. I'm looking for Template which gives an idea how to gather the Requirements for Interactive Reporting Dashboards.. Co

  • Difference for method stack size in release and debug builds

    Hi, I have a question regarding the method stack size. Running my project in the debug version works fine. Running the same project as release causes a StackOverflowError (60 entries). Is there any difference in the allowed stack size? If I split the