INDCS3 Print Presets do not hold Printer Preference Settings

We are running WinXP, INDCS3 suite. We noticed that when creating and saving a Print Preset and reloading it to another PC, the Printer preference settings (in particular) paper size and tray do not hold. We created several for staff and when they LOAD them, the printer/preferences from specific printers do not hold. We did not have this problem in CS2.
Is this simply the fact that the Print screen setting hold, but preferences (setup) for a specific printer do not?
Can anyone share any info on this?
KPanthen, Albany, NY

I'm having a similar problem where I cannot set my printer to collate and the checkbox is grayed out in General tab.. and I know my printers are able to collate.. For some odd reason Indesign doesnt exactly read or detect the printer settings..

Similar Messages

User Print templates will not hold Print Settings Presets

User print templates set up for different papers will not remember/hold Print Settings Presets

Jeff,
You are correct it does work, I added a step not needed - I created a Preset on the Print Setting page, I should have left that as Default, it works that way. How pleasant to get a response from you, I just watched Camera to Print & Screen #39 Print from Lightroom this morning where I learned about Print templates. Thanks so much.

Standard text displayed correctly in print preview but not in print

Hi,
I have a script in which a standard text has to be printed in the output.
The standard text contains some german characters.
These characters are displayed correctly in print preview but not in print.
The text is maintained in 3 languages DE,EN and Russian.
The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
Please suggest something.
Regards,
Richa Aggarwal

Hi Richa,
Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters. If a character does not display then that means it does not exist in the font that you are using.
Regards,
Ryan Crosby

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

Printing presets are not loaded correctly

Dear community,
i have the following problems using different printers (Canon MG5200, Epson Workforce WF3620, etc.):
I saved about 10 own printing presets and when I check on them under "Show presets" they are totally correct. But when I want to use them in a following print job and select them in the drop-down list "Presets" they are not correctly loaded. E.g. "Paper Size" and "Pages" are alternated to thesetting saved in the preset but e.g. the "Duplex Printing" checkbox or the "Print Quality" drop-down list are just left on the setting they were on before.
Anyone knows that problem and can help me?
Thanks for your help.
Greetings,
Fares from Munich

Sorry for the delay in responding.
I was having trouble with presets, too, on my Epson printer/scanner, which is an old machine and the newer driver software does not give the same print setting options that came originally. So I decided to start from scratch. First I used the Epson uninstaller to remove the printer software. Next, reset the print system, then connected directly to the printer via USB. Ignored the initial offer to download driver software. In the printer panel in System Preferences, clicked + to add the printer. Then the printer was set up by the system. Still connected directly, I made the presets. Make sure to check the box for "All printers" for your presets. These presets should work when you connect your printer on the network instead of USB.

Print Presets Do Not Save

So at some point in recent history — all my print presets are completely useless in all applications. Everytime I print a document — it defualts back to paper size = Other no matter what printer I select.
Making matters worse, is that when I create a print preset it ignores every detail that you would actually save a preset for and retains only the printer name. Scale, paper size, etc are all ignored.
So everytime I print a file I have to select every detail over and over and it is really **** frustrating and shocking that something so basic would be so broken on a Apple release.

First off, let's not rush to blame Lion. My first thoughts on this is that it's a permissions issue. Have you tried locating the printing preset prefs file(s) and deleting them? Doing so and setting the presets again, should create a new file with the proper permissions. You will find the preset prefs files in /Users/UserName/Library/Preferences. The file is called something like "com.apple.print.custompresets.forprinter". You will have a .plist file and a plist.lockfile. Delete them both. Also, you will find a separate file for each printer.
Another thing to try is to upgrade your printer drivers to their latest versions. That fixed a lot of printing issues for some of my clients who had similar issues.
It never hurts to do a repair of your home folde'rs ACLs. Here's a great article on how to do that:
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

Printing Presets Problem, Not Retaining Settings Assigned To A Preset.

Hi
I have a 10.5.8 client computer that is experiencing problems with saved printer presets not retaining the paper tray assigned to that preset. It works for other printers but not this one particular printer. I have tried the following.
1. Repair disk permissions.
2. Delete the troublesome printer presets and recreate them.
3. Reset printing system and re-add printers and recreate all printer presets.
4. Ran Onyx maintenance scripts, cleared caches, etc.
5. Re-applied 10.5.8 combo update.
Any suggestions would be greatly appreciated.

Hi xenainoz
In SAP DMS Whatever document that are linked to an Object Such as PO, PR , Material, WBS element, Sales order Item cannot be printed directly.
Mean Suppose if you are Printing PO and want to Print also Documents linked to PO line items , this is not possible in standard SAP.You will have to do ABAP Enhancements.
Please check this link . hope you will get some idea.
When PO is Mailed to vendor the DIR Original should also go as addn attachm
With Regards
Mangesh Pande

Printing From PSE12 - settings not holding/prints are inconsistent.

Printing from PSE12, MacOS with PSE12 controlling color/appling profile.
Color management does not appear to turn off or disengage within any given print driver.
When selecting Color Matching, both ColorSync & given printer are active, both should be ghosted out.
After printing one image/sheet & printing again & selecting Color Matching within the print window both are ghosted out.
Saving a pre-set does not solve the issue.
Currently prints are not matching when having PSE12 controlling color.
what is causing this issue ? Is it PSE12 ? Is it the OS ? WHAT !
Please help. THANKS

This inability to disable color management is within the OS, right ? Or is it PhotoShop Elements ?
Yes I do have means of controlling color management from a driver stand point but the attempt here is to turn color management off from the OS & driver to allow the app to control color management.
Problem is that when printing and setting/selecting settings to allow this, it appears management is getting miss managed.
And if I set a pre-set within PSE, settings do not hold.
I do not want ColorSync to control color management.
I do not want print driver to control color management.
And settings to not hold from print to print and a pre-set does not appear to hold as well.
What is the fix for this ? Do not use PSE ? Do not use MacOS, This does not happen on a WIN based system ?!?

Printer setup utility not recognizing printer

I have a G5 powermac with os 10.3.9. I have a HP 5000n printer with an ethernet connection over a LAN. The printer was working fine however It stopped working today. I tried reinstalling the HP drivers but the printer does not come up in the printer setup utility list. So I deleted all old references and tried again but still not showing. As I remenber this original setup was really easy but I can't get it to work now? Any help greatly appreciated

Printer troubleshooting checklist:
1. Check that the printer operates by doing a self-test print using the buttons on the printer itself.
2. Check that the cable is fine. Perhaps swap the cable if another is available.
3. Repair Permissions using Disk Utility, found in Application/Utilities.
4. With Printer Setup Utility closed
Locate the com.apple.print.PrintCenter.plist
found in ~/Library/Preferences and trash it.
5. Switch off, disconnect and unplug the cable of the printer.
Locate the com.apple.print.HP5000n.plist or similar name
found in ~/Library/Preferences and trash it.
Reconnect the printer, switch on.
Open Printer Setup Utility, select add printer.

Fuji Xerox printer working, then not! print status 'stopped'

I hope someone can help me...
-Had real difficulty getting printer to work. Finally installed drivers from set up disc and all was fine
-2 months working without an issue til today. when trying to print 'stopped' was the status of all jobs
-removed driver, rebooted computer, tried to print, printer was recognized and driver selected automatically, and same thing happened.
-tried forcing the print with ' hold' 'resume' 'pause' and so on to no avail
-removed driver, re-loaded drivers from setup disc and rebooted computer
-tried manually selecting driver from system preferences and printing... same result. I did notice once when I tried hitting 'hold' and then 'resume' that a little message flashed up for a moment next to the picture of the printer under where it says 'Printer Ready' something about opening raster file failed or some such?
I've looked at several postings here and tried many of the suggestions such as disconnecting everything and rebooting etc, but I'm stumped.
Any help would be greatly appreciated.
Many thanks in advance.

Found my own fix for this problem after much web surfing.
If anyone else has the same problem with this printer, this posting is fantastic.
http://www.macriot.com/article.php/20080208052820534
Cheers

I can using AirPrint from safari and email to my hp printer but do not get print as an option from the pulldown menu from the new york times and other apps. How can I print directly from these apps?

I can't seem to print directly from apps like the new York times. Print is not an option from the pulldown menu. Print to my hp printer works fine from safari and email though and from some other apps. Do some apps not permit printing? That doesn't right.

sadie1 wrote:
Thats funny. If go to ny times on safari therebis a print icon and no problem printing. On the app -- and I am a paid subscriber -- no print option ...
You can ask the NY Times why not.
Standard behavior is that Airprint always works with iBooks, Mail, Photos, and Safari. Apps are up to their author.
http://support.apple.com/kb/ht4356

Print Queue will not remove print jobs

I am running Windows Server 2008 R2 Standard. I have a Printer HP LaserJet P4015n set up as a network printer thru DNS. The printer is working fine all print job will come
out. Each time I send a print job to stays in the queue with the Status "Sent to printer". If I send another print job to the printer it will print out however the job will stay in the queue. I have added the printer to a user’s machine and they were
able to see all the print jobs in the queue. I have stops and started the spool however it does nothing. I have already reinstalled the printer but it has done nothing to help.
After about 5 - 10min of the jobs are sitting the in the queue they delete themselves.
Does anyone know of anything I can do about this?

Hi,
Thanks for the post.
Here is something I need to confirm:
1. Does this issue occur with other network printers?
2. Does this issue occur when printing a text file?
If this issue just occurs with HP LaserJet P4015n, it is caused by the specific printer driver.
Now please perform the following steps to troubleshoot this issue.
Clear spool file
1. Stop the spooler by doing the following:
a. Click Start , Settings , Control Panel , Administrative Tools , then Services .
b. Scroll down the list of services for the Print Spooler.
c. Right click Print Spooler and click Stop .
2. Delete the spool files
a. Open My Computer.
b. Go to C:\WINDOWS\system32\spool\PRINTERS\ .
c. Delete all of the files inside of this folder.
3. Restart the spooler.
a. Click Start , Settings , Control Panel , Administrative Tools , then Services
b. Scroll down the list of services for the Print Spooler.
c. Right click the Print Spooler and click Start.
Change the spooling format
Set the spooling format to RAW, and then try to print directly to the printer instead of spooling the print job. To do this:
          a.       Click "Start", point to "Settings", and then click "Printers".
          b.       Right-click the printer that you are using, and then click "Properties".
          c.       In the Advanced tab, click "Print Processor".
          d.       Set the default "Data type" to "RAW" for both "WinPrint" and "ModPrint".
          f.        Click "OK", click "OK" again, and then close the Printers dialog box.
Does it work?
Hope this helps.
Miles
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Photosmart C6300 Prints Photos but not Regular Prints

I printed some photos on Iphoto, and turned out ok. I started printing regular documents on paper, color is barely visible and black does not show at all. Tried changing all my black cartridges, still the same result. Help! DO i need a new printer?

Hello @stephicristi , welcome to the community
I read your message about your Photosmart D110a not printing photos correctly, and showing "print quality" issues. I wanted to respond to you with a troubleshooting guide I would suggest following that might help you out. If the print quality problem remains, please give us a call to see about your printer options.
Fixing Print Quality Problems for the HP Photosmart e-All-in-One (D110a and D110b) Printer Series
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Logo appearing in print preview but not in print for Xerox Workcentre M118

Hello experts,
I am not able to print logo(in .bmp) format in Xerox Workcentre M118 PCL 6 printer. It is displaying accurately in print preview. While taking print out only grey background is coming, no trace of logo. Can anyone suggest, what are the print related settings needed in SPAD or any other transaction needed to print graphics. The logo is coming accurately if it is stored in pdf and then printed.
Regards,
Debopriyo

hi,
To print logos using the SMARTFORMS, we need to first upload that logo onto the application server. The steps to upload the logo onto the application server are as follows:
1. Go to transaction SE78
2. Select the desired graphic in the tree (for example, BMAP)
3. Choose GRAPHIC --> IMPORT
4. Enter the name of the graph and the description
5. Select the type of the image (black/white or color)
Now the logo is uploaded onto the application server. To print this logo using the SMARTFORM, create a graphic node in the window and enter the name of the image you had just uploaded. Your logo should now print.
Refer the following links.
http://www.sapmaterial.com/smartform_example.html
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1255081,00.html
Below is the link for print related problems.
http://www.geocities.com/SiliconValley/Grid/4858/sap/Basis/printprobs_solutions.htm

CS 5 not holding print settings

Weird issue... When customizing my print settings for a print job none of my settings hold when I go back into print. Anyone else having this issue? It's very frustrating when have to print 6 jobs right away and I have to manually set the parameters again. I have a few other machines that are holding the settings but not mine. Thanks!

Keep in mind print settings are stored in the PSD document, so you may be thinking it's not remembering your print settings, when in fact it's rememebering them a different way... In other words, if you print document 1 to printer A then save as a PSD, then print document 2 to printer B then save as PSD, then re-open document 1, the default printer for document 1 will still be A.
Another known problem with some printer drivers is that you have to set the parameters twice in order to get them to stick. This could affect, for example, then number of copies to print. A workaround is to make your changes, then go through the [Print Settings...] button twice (first time to make changes, second time to check the changes).
Hope this helps!
-Noel

INDCS3 Print Presets do not hold Printer Preference Settings

Similar Messages

Maybe you are looking for