INDD CS6 error: "InDesign cannot open files in the "InDesign CS5.5 Document" format.

Working in CS6 on Mac OS X 10.7.5: When I double click an INDD file in the Finder, I get the following error from InDesign:
"The document "doc name" could not be opened. InDesign cannot open files in the "InDesign CS5.5 Document" format."
This just started recently and I have not been able to figure out why. I have not updated INDD or OS X. I can't think of anything else that changed, other than maybe a Java update. Have not updated to the latest OS yet.
The files I'm trying to open are files I created with CS6 - as recent as a few minutes ago. I can open them fine using the File>Open command in InDesign so I can open them, but I can't open them by double clicking them in Finder or dragging them to the INDD icon in the dock.
The info in Finder's "Get Info" window says they are CS6 files set to open in CS6 and I have permissions to read and write. They are not locked.
This is not incapacitating, but rather annoying and slows me down since this is one of the most common ways I open files.
Any suggestsion would be appreciated.

Probably won't work because it sounds like an OS problem of some sort, but you can try trashing the prefs. See Replace Your Preferences

Similar Messages

Illustrator cannot open files in the "Adobe Illustrator Document" format.

I recently upgraded from CS4 to CS5.5 on my Mac (10.6.7), and now when I try to open a .ai file, I get the error:
Illustrator cannot open files in the “Adobe Illustrator Document” format.
Google doesn't seem to be much help other than one other person who had the same issue. Any idea why Illustrator can't open Illustrator documents?

Actually, quitting Illustrator and re-launching it solved it. It was the first time I had launched Illustrator after installing it, so maybe it had something to do with that.

CS5 InDesign cannot open files in the InDesign CS5 document format

I'll be working in InDesign CS5 with no problems then at some point I'll double click on an InDesign file and a window comes up and says - InDesign cannot open files in the InDesign CS5 document format. Sometimes when this happens I have to completely reboot my whole system before I can get InDesign to function correctly. Is this a flaw with CS5? Did not happen with previous versions. It doesn't always happen but I can't figure out what causes it. Would appreciate anyones help. I'm getting to really HATE InDesign!!

I have not uninstalled and reinstalled, but I did just switch over to another workstation using Time Machine. The previous system was Leopard. This one is running Snow Leopard.
I'm not sure how to parse this. When you say "switch over to another workstaiton using Time Machine" do you mean, "started using another machine that happens to be using Time Machine for backups and is also running 10.6 instead of 10.5"?
Or do you mean, "Used the Time Machine program to upgrade from 10.5 to 10.6?" If you mean the second one, well, I can't say I am surprised that things are messed up. And that would make your problem rather different than the other posters, which is good reason for you to have started your own thread (and thus your own solution)....
I'm a little bit leary of getting in and changing things in Terminal, without understanding what I am changing. Plus this is a workstation at work, so if I screw something up, that is not a good things, and I don't have time to spend a day fixing things back up again, with the way our workload is.
Well, you can find a lot of marginal documentation about lsregister and Launch Services, but I wonder whether your understood the ramifications of messing with Time Machine (or maybe I have misinterpretted you!). I'd be surprised if you found another way to fix this, other than uninstall/reinstall.
Good luck.

Acrobat cannot open files in the "Adobe PDF document" format

The document “example.pdf” could not be opened. Acrobat cannot open files in the “Adobe PDF document” format.
Hi All,
Running Acrobat Pro 9.4.2 on Snow Leopard, have never had this problem before. Showed up about a week ago, I believe with new update. Can't double click on a file in Finder, or drag and drop to AcrobatPro in Dock, but can open from within Acrobat Pro / File / Open command.
All my preferences are correct with "Open With Acrobat Pro" as the default.
I've read all the threads I can find with no answers yet.
Anyone found and answer, I see a lot of us are going through this over the last year.
Only possible common thread I have found is possibly HP printers. But I've been running HP printers all along with no issues.
Thanks for you input.

Moved to Acrobat Installation & Update Issues
Either Acrobat needs to be re-installed or the file is named as a pdf file, but it is not a pdf file. Try opening the pdf file in a text editor and read off what the first line of the file is.

I keep on getting the message 'AppleScript Editor cannot open files in the "AppleScript Editor Document" format' when I try download software?

Is there a way to still download these programs?

Firefox reports that it is my default browser. I changed the default browser to Chrome and then back to Firefox, in case that's what you meant by "redo." Right-clicking and picking Firefox in the Open With menu works, but double-clicking the file or just picking Open in the right-click menu does not.
I don't know why this is. Could it be due to a version update? I've noticed that Google Notifier's "Go to Inbox" no longer opens up Gmail in Firefox either.

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

Plugin development for premiere, adobe example error LNK1104: cannot open file 'C:\Program Files\Ad

Hello,
I downloaded the Premiere Pro CS 5.5 Win SDK, i open the project SDK_Exporter in Visual Studio 2008, when i hit debug i get the following error
Error
1
fatal error LNK1104: cannot open file 'C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore\ExporterSDK.prm'
How can i resolve ?

RESOLVED LOOKING AT THE PAST
1.Zac Lam,01-dic-2013 10:43   in reply to Alex B MartinReport
Hi Alex, Are you launching Visual Studio with administrative privileges? If not, you won’t be able to generate the .aex in certain protected folders because of a Windows security restriction.
Was this helpful? Yes   No
Reply
|Mark as:
Unmark as Correct
|Translate
7 posts
03-ene-2013
2.Alex B Martin,01-dic-2013 12:34   in reply to Zac Lam
Yes it works, thanks Note: For CS 5.5 Administrative privileges are not need, so thats only with visual studio 2010 and premiere cs6 where i need to run vs2010 as admin.

Error LNK1104: cannot open file 'MSCOREE.lib'_In visual studio 2013

Hi,
I have upgrade the window application from vs 2008 to vs 2013 after upgradation, when i m trying to build madelineDll I am getting this error LNK1104: cannot open file 'MSCOREE.lib'
MadelineDLL
Can someone help me to resolve this ASAp.
Thanks in advance
Archana K.

Hello archana,
From your description, this exception seems to be related with the C++, if so, i suggest you could post this issue to the C++ forum and i notice that this issue is caused by the upgradation of Visual Studio, you could aslo ask it on the Visual
Studio forum to confirm if the VS2013 has some changes compared with VS2008. I move it to the where the forum for, there are forum experts would help redirect it to a proper forum.
The current forum you posted to is for .NET class libraries.
Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009 ,NI DAQ 7.01 and Field Point 6.05.

I am having a application in Visual Studio 2003 on Windows XP , Now I am Migrating the application in Visual Studio 2005 on Windows-7 .
In my Development PC , I was install Measurement Studio 2009 , NI DAQ 7.01 and Field Point 6.05.
my application is Showing following error:
Linking...
LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDl?l\Debug\BuildLog.htm"
NICfpDAQDll - 1 error(s), 0 warning(s)
When I copy from NiFieldPoint71D.lib library from Measurement Studio 7.1 and put in :\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib.
my application is Showing following error:
1>Linking...
1>atlsd.lib(atltrace.obj) : error LNK2005: "unsigned int (__stdcall* ATL::g_pfnGetThreadACP)(void)" (?g_pfnGetThreadACP@ATL@@3P6GIXZA) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1>atlsd.lib(atlbase.obj) : error LNK2005: "class ATL::CAtlWinModule ATL::_AtlWinModule" (?_AtlWinModule@ATL@@3VCAtlWinModule@1@A) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1> Creating library ..\..\lib\debug\NICfpDAQDll.lib and object ..\..\lib\debug\NICfpDAQDll.exp
1>..\..\bin\debug\NICfpDAQDll.dll : fatal error LNK1169: one or more multiply defined symbols found
I want to ignore NiFieldPoint71D.lib from using project setting(Linker->Input->ignore Specific Library ) but still it is showing same error.
In the project Setting I am done following setting:
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
Linker->Input->ignore Specific Library: mfcs71d.lib;libc.lib;'NiFieldPoint71D.lib
Please provide some solution.
Thanks
Nityanand

You posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009

I am Migrating a application in Visual Studio 2005.
In my development PC I was install the Measurement Studio 2009
my application is Showing following error:
1>Linking...
1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
1>NICfpDAQDll - 1 error(s), 0 warning(s)
In the project Setting I am done following setting
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
but in "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";" directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
Please provide some solution.
Thanks
Nityanand

You posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009

I am Migrating a application in Visual Studio 2005.
In my development PC I install the Measurement Studio 2005.
my application is Showing following error:
1>Linking...
1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
1>NICfpDAQDll - 1 error(s), 0 warning(s)
In the project Setting I am done following setting
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
but in "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";" directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
Please provide some solution.
Thanks
Nityanand

You posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

IMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."

Question, asked professionally
When will iMovie for Mac be able to open iMovie for iOS projects?
Question, asked snarkily
Any reasonable expectation that we will ever be able to edit projects--created in iMovie on our fancy new expensive phones--in iMovie on our fancy new expensive laptops?
Specs
iPhone 6 Plus (contract-free, 128 GB)
iOS 8.1.2
iMovie for IOS 2.1.1
MacBook Pro (Retina, 15-inch, Mid-2014)
OS X Yosemite 10.10.1
iMovie for Mac 10.0.6
Error Messages
iMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."
iMovie for iOS: "An error occurred during export."
Frustration
Manufacturer: Apple (a multibillion dollar company)
The year: 2015
Hours lost: Three Weeks
Total costs for both devices: $4,000
Background Details
I just wasted thousands of dollars on these two hardware devices by making the rookie mistake of assuming projects were compatible across iMovie applications. However, the exported .iMovieMobile project files are in an incompatible iMovie for iOS Project format that iMovie for Mac cannot import. So I am stuck with a 15 GB .iMovieMobile project file--for an hour-long+ video--that I created and I was editing on my iPhone for weeks that I can no longer edit on my iPhone due to an error, nor potentially rescue the lost hours on my Mac, the sole reason I purchased it one day ago. The reason I can no longer edit the project on the iPhone is because iMovie for iOS suddenly stopped displaying the video of the project in preview, external display, etc. The clip snapshots remain visible and the audio remains audible, but the video appears fully black. Any attempt to export the video at any resolution generates an error message. (This error applies only to this project; other projects export without issue.) I can save to and from iTunes or iCloud without issue, but import into iMovie for Mac is unavailable for this latest version. Deleting and reinstalling the app does not resolve the issue. Nothing has resolved this issue; so I purchased the Mac as a last attempt, and it appears that I will have to begin the meticulously painful process of recreating the video from scratch with all the titling, sound effects, precise edits, transitions, organization, etc. This video was to surprise my mother for her birthday with "this is your life" footage, including my late father. It may seem like a small first-world problem, but such things carry big emotional impacts. What began as such a wonderfully intuitive and joyful experience has descended into a soul-suffering nightmare of catastrophic proportions. This software grinch stole christmas.
Likely Suspect
I believe this originated from Apple's confusingly designed iTunes client that removed videos used by iMovie for IOS during a sync, which I successfully restored back to the iPhone. This apparently resulted in iOS seeking and then claiming to find all of the videos, but somehow a bug in the coding causes the audio to play but not display video, and no way to resolve the bug from an enduser standpoint. I was hoping that iMovie for Mac would allow me a workaround, but I'll never know because the iOS and Mac formats are currently and dishearteningly incompatible.
Suggestions
I never performed a full backup of the iPhone, but I don't believe any of the iCloud nor local backups actually backup iMovie projects themselves anyway. (That's a fail.) So one must back them up manually to iTunes or iCloud.
MANUALLY BACKUP YOUR PROJECTS DAILY, IF NOT HOURLY.
MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING OR SYNCING FROM ITUNES.
MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING VIDEO CREATED OUTSIDE OF YOUR IOS DEVICE.
Resolutions
Hope Apple fixes this problem soon? Perhaps.
Return the Mac to Apple, if they allow? Perhaps.
Someone in this community will provide a magical workaround--that I haven't already attempted? Perhaps.
As unlikely these options may be, I shudder to imagine that I may be forced to suffer no resolution and $3,000+ completely down the drain, because if iMovie for IOS worked as intended, I wouldn't have ever purchased the Mac as a last ditch effort to rescue the project. It meant that much to me to surprise my mother by attempting to retrieve this project file from oblivion--but to no avail.

I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

ITunes cannot open files in the "MP3 Audio File" format

Lately I've been getting this error that iTunes can't open MP3 files. It happens when I try to double click on an MP3, however, if I click and drag the MP3 into my iTunes library it opens fine. Not a huge problem....just a nuisance.
Running iTunes 10.0.1

I suddenly have this same problem with MacOS 10.6.7 and iTunes 10.2.2. Clicking on a tune in a folder gets the prompt "The document xxxx.mp3 could not be opened. iTunes cannot open files in the MP3 audio format."
Dragging the tune into iTunes will open it, so there's no problem with it being a "trouble file" that needs validating with some external app. I believe this is a new glitch that came with iTunes 10.2.2. It's workable but quite irritating when trying to manage an iTunes library that includes 28,000-plus songs.

I have my photos iPhoto but my iPhoto library is empty. when clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

I have my photos in iPhoto but my iPhoto library is empty.When clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

When what is clicked?
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

JoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM

INDD CS6 error: "InDesign cannot open files in the "InDesign CS5.5 Document" format.

Similar Messages

Maybe you are looking for