Indd file will not load on first launch...but will on second lauch after appcrash. Why!?

Problem signature:
Problem Event Name:          APPCRASH
Application Name:          InDesign.exe
Application Version:          9.2.0.69
Application Timestamp:          5297b4c4
Fault Module Name:          Public.dll
Fault Module Version:          9.2.0.69
Fault Module Timestamp:          5297b401
Exception Code:          c0000005
Exception Offset:          000000000005c584
OS Version:          6.1.7601.2.1.0.256.48
Locale ID:          1033
Additional Information 1:          26a0
Additional Information 2:          26a0e2e010bd8b0d5cc596e9d7264700
Additional Information 3:          162f
Additional Information 4:          162f99487c9b276dea85e42e7773ca64
I have been dealling with this for too long.
I have reset preferences on start up.
I have exported to .idml
I have moved files to different drives
I have changed file names.
Nada.

Hi, did u find the solution to this issue? I am also facing similar crash issue in the same Dll and at the same Offset as mentioned by you.

Similar Messages

I have photoshop elements 10 and when I put the 1st disc in it will not load it just launches. I have gone through the step and troubleshooting in the manual but no dices please help.

I have photoshop elements 10 and when I put the 1st disc in it will not load it just launches. I have gone through the step and troubleshooting in the manual but no dices please help.

Hi,
You can download Photoshop Elements 10 from the link below and Install with the serial number,
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
Thank you

Transitioned from an older G5 Pro to a new iMac. My Final Cut files are on a 2T WD external HD. When I try to boot I get a "General Error 41" and files do not load. Took the WD to the Apple Store and tried it on one of their iMacs...it works OK. Ideas?

Transitioning from an older G5 Pro to a new iMac. My Final Cut Express files are on a 2T WD external HD. When I try to load a project to the iMac I get a "General Error 41" and the files do not load. Took the WD the Apple Store and tried it on one of their iMacs...it works fine. The problem seems to be in my new iMac, other WD's with different files load OK. Any ideas?

Hi
Can it be so that You try to boot a G5 (Power) Mac from one external hard disk - then try to boot an INTEL Mac from same external Mac.
WILL NOT WORK - It's not just the Mac OS Extended formation that plays a part here - they have to be formatted differently to be bootable on each system.
I don't think there is any solution to this AT ALL.
When You format a hard disk.
• Select Partitions
• Under the graphic representation to the left there is an Alternative button
Here You select if it's supposed to be Bootable on a Power CPU or INTEL-CPU
No other possibilities.
Yours Bengt W

Write incorrect record to Unix file and not load to PSA

Hi,
Is there anyway to write an incorrect record to a file from the transfer rules, such as if the record is not found after a search through one of the master data table, it should not load to the PSA but write to a UNIX file? What would be the ABAP code?
Thanks,
Will

Hi Will,
Transfer rules are processed after data are loaded to PSA. So you can only avoid that records are updated to info providers and write them to a file on your application server.
If you really want to manipulate records in PSA you need to load required data to PSA within a process chain and to add a report that deletes the records from PSA and writes them to a file.
The steps are
1. Transfer rules
     1.create a start routine
     2.load required masterdata to an internal table
     3.loop at datapak
     4.delete records according to conditions
     5.append records to an internal table
     6.load file from internal table
2. PSA
     1..Create a report
     2. Load PSA request into an intenal table
     3.load required masterdata to an internal table
     4. loop at internal PSA
     5 .delete records according to conditions
     6.append records to an internal table
     7.load file from internal table
Hope this helps
Joe

Firefox will not load in my account, but loads on the other accounts on the same computer. Internet Explorer loads ok in my account

Firefox will not load in my account, but loads on the other accounts on the same computer. Internet Explorer loads ok in my account
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

What is your anti-virus software?

ITunes Store will not load properly and returns too homepage in seconds

iTunes Store will not load properly and returns too homepage in seconds what do I do too fix it

I am having the same problem now, did you ever find a way to fix it?

Opening links in new tab will not load pages either from new link or bookmarked pages after firefox 3.6 update

After updating my fire fox to 3.6.3 I now cannot click on links into a new tab it will just open a blank tab, after hitting refresh, nothing happens. But when clicking bookmark link it will open in new tab as wanted but will not load unless I re-click it a second time. Clicking links normally will load page. Entering a URL like www.yahoo.com will not load either. To get to this page I had to a search engine like yahoo and type in fire fox website and it from there.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

POL-3013 Message file is not loaded

Hi,
I have posted a publication to the server and I have succeeded also. I am able to update some tables that I have created. When I rebooted my machine I founded a popup message DMAgent failed to start during the startup. When I try to login to the local database on my machine I am getting an error message ": POL-3013 Message file is not loaded" When I searched the docs it says check ur username and password but I am good. I even restarted the machine and this time DMAgent started successfully and still I am having the same error. Any replies appreciated..........

Hi,
Actually I have installed the Mobile database workbench and Oracle Lite client in the same machine. I got a response from metalink indicating that the MSQL path should be set to BIN directory where mobile client is installed.
Its like C:\mobileclient\bin\msql system/rahuldev@jdbc(or)odbc:polite:rahul_datasource;
Thanks for your support and replies to figure out the error and resolving it.

Sharing Folio - Source .indd files are not available for this article

when sharing a folio, and opening it up in indesign 5.5 all articles say:
"Source .indd files are not available for this article"
What is the point of sharing if you can't change articles and update them?

Because you’re not sharing the InDesign files, you’re sharing the folio.
Pretty similar to sharing a PDF but not the source files.
That said, I’m working on a project with someone else and everything sits in a Dropbox folder. Only I can update the folios but my partner has access to the InDesign files.
Bob

The project file is not bound to source control, but the solution contains source control binding information for it.

This may be more of a SQL Server Management Studio question, but I couldn't find a SSMS forum...
I've got a database solution that contains several projects. They're just to keep track of changes to stored procedures, triggers, views, etc in a few databases I maintain. There is a problem with two of the projects though. No matter what I do, I can't seem to get them bound to source control right. When I open the solution, I get:
The project file is not bound to source control, but the solution contains source control binding information for it.
With two options, use solution binding and remove solution binding. If I keep the solution binding, everything works fine. But it's really annoying to have to deal with every time I open the solution. If I remove the solution binding, the projects are now unbound again. If I try to fix them (using the change source control or Add Selected Projects to Source Control options under the File->source control menu), I just end up in the same situation. I've even tried deleting the projects and re-creating them from scratch, then re-adding them to VSS. If I open the solution files in a text editor I can see the SCC tags in every project, but these two. Since I can't manually add the tags, and Management Studio itself only seems to want to bind them the wrong way, I'm getting really frustrated.
Can anyone point me toward a way to bind these so they work like the rest?

However, that does not appear to be the ONLY cause of the problem. I am a single user and only using TFS2010 and SSMS2008R2. My issue is that I wanted a solution file for each project so that they could managed independently, and a super-solution
file that contained all projects, so that I could perform system-wide searches and cross-checks.
I solved the problem by:
1. Choosing the option to use solution binding, then
2. Adding another project to the solution. This forced the re-write of the solution file.
3. Adding another script to the project. This forced the re-write of the project file.
4. Checking in all changes.
5. Deleting the new script and the extra project,
6 Checking in all changes.
This appears to have solved the problem.

HT5361 Can I set the mail in osx 10.9.1, not when i first set, but now does not.

Can I set the mail in osx 10.9.1, not when i first set, but now does not.

I am not sure I understand you question, but if you are attempting to set up an iCloud email account, you can start in System Preferences > iCloud > Account Details. Establishing the details of your iCloud (a.k.a. Apple) ID there automatically creates the account in Mail

Failure to down load CC Acrobat DC Pro for a second time after a system recovery

Failure to down load CC Acrobat DC Pro for a second time after having to perform a system recovery.
The previous 'DC Pro' is not showing as not being an installed program.
When trying to perform the update again an error shows in the Creative Cloud window 'the download appears corrupt please try again in a few minutes(26).
Trying again both in a few minutes and after a restart the same error message shows again.
What next?

check the dl'd file size vs expected file size to see if you're getting a completed download.
also, you can try a different browser and/or different wired connection and/or a download manager.

Ajax is caching the output and not updating the page.If you force a second postback after you should have seen a popup (but didn'), you then see popup displayed

Ajax is caching the output and not updating the page.If you force a second postback after you should have seen a popup (but didn'), you then see popup displayed

Hey, thanks for replying. It is the user who needs to manually submit the page.
Basically our page has a hidden div with various text fields and combo boxes. When the user click on specific links on the page, this div is populated and made visible to the user in server side code.
What happens for all other browsers other than firefox 23 onwards (worked fine in 22) is that after the user clicks on the link, our server side code is executed via a HTTP post. The server then renders the hidden div and sends the additional HTML down to the browser via ASP.NET AJAX.
With Firefox 23, the additional HTML is not rendered on the first postback. Subsequent clicks of the same link execute the same server side code but the additional HTML is rendered on the browser without issue.
We've done a lot of debugging now and the issue is localised to a specific third party supplier's (Infragistics) control. I think Firefox 23 must have changed the way that the viewport or screen bounds are calculated or reflected back to this control as the issue seems to stop when we remove the control's MaintainPositionOnScroll attribute. It might be that the Firefox 23 DOM is not able to provide the screen dimensions accurately when the page is first rendered. I say this as the second postback renders the additional HTML fine.
The control in question is quite an old version so I don't think it's your issue to be honest.
Just so that this might be helpful to other developers using the Infragistics Window Dialog Control, setting MaintainPositionOnScroll to false solved this issue for us.

I am tethering and Itunes help says I am not connected to the internet but I am. Does anyone know why?

I am tethering and Itunes help says I am not connected to the internet but I am. Does anyone know why?

This could be the connection you use, may be is your internet connection could block this sites...
iF i'm on vpn the appstore didn't work, so this could be your problem too... is a proxy like problems.... this happend

Disk will not load on first pressing of power button

I have a 2-3 month old HP Pavilion p6 Series HP P6-2317c- PC which is running Windows 8 64 bit with IE 10. When I push the power button the disk light starts but will not load until I press the power button to restart 2 or 3 times then it works fine. I've never had this problem with an HP product before. It's still under warranty obviously can someone help!!! Please I don't want to ruin a new computer or power source.

Opening the case will not void your warranty. If, once you open the case, you cause damage to the PC, the warranty will not cover that damage. So, for example, if you yank too hard on something and break a connector while you're in there, that particular damage is not covered. But I doubt you'd do that if you follow the instructions carefully and take your time.
http://welcome.hp.com/country/us/en/privacy/limited_warranty.html
See the section titled "Exclusions." Nothing in there about voiding your warranty if you open the case.
Although I am an HP employee, I am speaking for myself and not for HP.
Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

Indd file will not load on first launch...but will on second lauch after appcrash. Why!?

Similar Messages

Maybe you are looking for