Independent Servers?: Publishing and page names with spaces

Hello I am hoping someone who has published their site to server independent of .mac could tell me how they managed to name their pages with spaces without publishing problems. I have read here that you have to use an underscore or something similar to name your pages....Eck....I am making a site for my mother's business and I would prefer to use page names like 'about our service' instead of 'aboutourservice'. And I have seen that some people have managed this. Can any kind souls help?
Thanks!

DJ.... I publish my site to FOLDER first, then upload
it to my server using FETCH FTP. It loads fine and
doesn't have trouble with the menu spaces and such.
Not sure what everyone else is saying about that, but
it's not an issue. I use .Mac for my podcasts, and
iWeb at DreamHost for my internet site.
Jim -- what's your url? I'm wondering if there are some hosts which automatically replace spaces in uploaded files. Normally you just can't upload them. Or maybe Fetch is doing it for you. Would be useful to know.

Similar Messages

  • File and directory names with Danish characters

    I have installed the Novell Client v2.0 for Linux on my Open Suse 10.3. The Client is connecting to my Netware servers (6.0 & 6.5) without any problems...
    There is one problem... Filenames and directory names with the Danish , & (ae, oe & aa), e.g the filename bger.doc (bger = books) is shown as b. and when clicking the file the file disappears from the file list. It seems to be the same problem with the German (umlaub).
    What to do?
    /Michael

    Originally Posted by J.H.M. Dassen (Ray)
    mimo <[email protected]> wrote:
    > There is one problem... Filenames and directory names with the Danish ,
    > & (ae, oe & aa), e.g the filename bger.doc (bger = books) is shown as
    > b. and when clicking the file the file disappears from the file list. It
    > seems to be the same problem with the German (umlaub). What to do?
    As far as I know, the Novell Client for Linux expects that file and
    directory names use the UTF-8 encoding and does not support a traditional
    8-bit encoding like ISO 8859-1. Try changing the encoding of file and
    directory names to UTF-8 as described in
    SDB:Converting Files or File Names to UTF-8 Encoding - openSUSE
    HTH,
    Ray Dassen
    Technical Support Engineer, EMEA Services Center, Novell Technical Services
    Novell, Inc. Software for the Open Enterprise Software for the Open Enterprise
    Seems a good hint. When I create a folder or file from within SUSE using an "Umlaut" everything is OK and NCL 2.0 displays them correctly as they are UTF-8 formatted.
    The proposed tool is no solution: one cannot convert folders or files that one cannot see (does it work for folders at all?). Maybe a windows tool would work because one could search for all files or folders with "Umlaute" and convert them. Other options?

  • SQL Query not working for column names with spaces

    Hi People..
    We have a strange situation wherein, the column name in the database table has a space inbetween like "Constant Name". While we write a JDBC statement code with the select query we get an exception for invalid syntax. It will help us in a great way if you have anything to inform us on this..
    Thanks
    Prabz

    Using case sensitive names and names with spaces in it is not a good practice.
    However, I believe the SQL standard accounts for this with quoted identifiers. I believe the syntax is
    . select "My Field1", "My Field2"
    . from "My Table'
    Have also seen the following although it might be MS Access specific.
    . select [My Field1], [My Field2]
    . from [My Table]

  • Role names with spaces (6.1 to 8.1)

    Hi All
    I'm working in an organization that has group and role names within their LDAP
    repository such that the group and role names contain spaces. Hence, for example,
    within a web.xml file lines like the following exist:
    <role-name>Some Role Name</role-name>
    This has worked without problem in Weblogic 6.1 but given some prelimanary work
    within 8.1 we are noticing that Weblogic 8.1 does not appear to like spaces within
    the <role-name> element.
    Is this just the way it is with Weblogic 8.1? Or is there a way to continue to
    use role names with embedded spaces within Weblogic 8.1?
    Thanks,
    Rob

    "Peter" <PeterB> wrote:
    >
    "Rob" <[email protected]> wrote in message
    news:3f57d329$[email protected]..
    Hi All
    I'm working in an organization that has group and role names withintheir
    LDAP
    repository such that the group and role names contain spaces. Hence,for
    example,
    within a web.xml file lines like the following exist:
    <role-name>Some Role Name</role-name>
    This has worked without problem in Weblogic 6.1 but given some prelimanarywork
    within 8.1 we are noticing that Weblogic 8.1 does not appear to likespaces within
    the <role-name> element.
    Sounds like a bug. File a support case.
    Hi,
    A workaround exists :
    1 - in web.xml, update your role-name element by replacing spaces with "_"
    2 - in weblogic.xml, add :
    <security-role-assignment>
         <role-name>Some_Role_Name</role-name>
         <principal-name>Some Role Name</principal-name>
         </security-role-assignment>
    Regards
    Christophe

  • I keep getting a message "safari cannot open page [page name with header information] because you are not connected to the internet.

    I keep getting a message "safari cannot open page [page name with header information] because you are not connected to the internet.  Then I check CNN for a time stamp, and I am connected to the internet.  I have reset everything suggested in other posts, ensured any other device that could be hogging bandwidth is off, the router is reset, the iPad is reset.  The other devices are not having this problem, and it happens on both places I use the iPad, the university library, (getting a second degree after a change in a long time career and at home. Any insight into this issue would be appreciated.

    Saing yu tried everthing provides little information to us.  We do not know what you tied.
    Have you tried:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Powering off and then back on your router- Resetting network setting: Settings>General>Reset>Reset Network Settings
    The toubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
    - Does you iPod conenct to other networks?
    - Do other devices connect to your network?

  • Opening Pages automaticly with Spaces

    Does anyone know how to get Pages started with Spaces automaticaly without having to open a Dokument first?

    Well let me explain. I've got Pages into the first Window in "Exposé & Spaces. So wenn I start the Computer, all programms that I put in there, are being automaticaly started. But wenn I press "ctrl" and "1" for getting into the first Spaces, Pages is not activated like for example Safari or Mail. I first have to go to the shortcuts and push the "Pages" button to activate the program. But i try with your sugestion and see if it works. Thanks anyways.

  • Page URL and Page Name in Enterprise Wiki

    Hello,
    I have a problem with the page URL and page name in our Enterprise Wiki. Parent and subsite locales are Turkish. My problem is, when I add a page in Enterprise Wiki and give it an English URL, the page Header is written in English and when I give a Turkish
    URL, the page header is written in Turkish. What I want to have (and I think the right way) is to have the URL in English and the page header in Turkish.
    To clarify my question, I will create a page with a Turkish name and URL. I will name it "Türkçe Tanıtım" (which stands for Turkish Demonstration), using Turkish characters. Then the URL becomes:
    http://mysite.com/Pages/T%C3%BCrk%C3%A7e%20Tan%C4%B1t%C4%B1m.aspx
    And the page header is "Türkçe Tanıtım", which is normal, as expected:
    If I change the page URL to look correctly, using English characters only, it looks like "TurkceTanitim." The URL becomes "tidy" (http://mysite.com/Pages/TurkceTanitim.aspx) but the page header also becomes "TurkceTanitim",
    which is not correct in Turkish:
    What I would like to have, and what I think it should, is to have a URL completely in English (http://mysite.com/Pages/TurkceTanitim.aspx) but have the page header in Turkish (Türkçe Tanıtım). I am sure this could be done in SharePoint, I/we are missing
    something but I don't know what.
    Can you give me a hand on this?
    Thanks in advance,
    Tolga

    Hi Tolga,
    I understand you would like to change Wiki page title but not page name in url.
    The title of the Wiki pages is always linked to the actual file name of that certain page. To get the use out of title property we have to manipulate the page template for the Wiki pages.
    Please refer to the article below and edit "/_catalogs/masterpage/EnterpriseWiki.aspx" in SharePoint Designer:
    http://social.technet.microsoft.com/wiki/contents/articles/17557.sharepoint-2013-change-page-title-in-wiki-sites.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to find the column name and table name with a value

    Hi All
    How to find the column name and table name with "Value".
    For Example i have value named "Srikkanth" This value will be stored in one table and in one column i we dont know the table how to find the table name and column name
    Any help is highly appricatable
    Thanks & Regards
    Srikkanth.M

    2 solutions by Michaels (the latter is 11g upwards only)...
    michaels>  var val varchar2(5)
    michaels>  exec :val := 'as'
    PL/SQL procedure successfully completed.
    michaels>  select distinct substr (:val, 1, 11) "Searchword",
                    substr (table_name, 1, 14) "Table",
                    substr (t.column_value.getstringval (), 1, 50) "Column/Value"
               from cols,
                    table
                       (xmlsequence
                           (dbms_xmlgen.getxmltype ('select ' || column_name
                                                    || ' from ' || table_name
                                                    || ' where upper('
                                                    || column_name
                                                    || ') like upper(''%' || :val
                                                    || '%'')'
                                                   ).extract ('ROWSET/ROW/*')
                       ) t
    --        where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'DEPARTMENTS')
           order by "Table"or
    SQL> select table_name,
           column_name,
           :search_string search_string,
           result
      from cols,
           xmltable(('ora:view("'||table_name||'")/ROW/'||column_name||'[ora:contains(text(),"%'|| :search_string || '%") > 0]')
           columns result varchar2(10) path '.'
    where table_name in ('EMP', 'DEPT')
    TABLE_NAME           COLUMN_NAME          SEARCH_STRING        RESULT   
    DEPT                 DNAME                ES                   RESEARCH 
    DEPT                 DNAME                ES                   SALES    
    EMP                  ENAME                ES                   JONES    
    EMP                  ENAME                ES                   JAMES    
    EMP                  JOB                  ES                   SALESMAN 
    EMP                  JOB                  ES                   SALESMAN 
    EMP                  JOB                  ES                   SALESMAN 
    EMP                  JOB                  ES                   PRESIDENT
    EMP                  JOB                  ES                   SALESMAN 
    9 rows selected.

  • Exchange 2010 server with 2 DAG servers - DAG1 and DAG2 - backup with 2 DPM servers one for each DAG server

    Hello,
      Please advice, i have an Exchange 2010 server with 2 DAG servers - DAG1 and DAG2 - backup with 2 DPM servers, one for DAG1 and one for DAG2 is it possible ?

    Hi,
    I confirmed with Exchange support team that DAGs could be backed up separately.
    Meanwhile backup database is important if you need to recover both Exchange server settings and database. See:
    Recover a database availability group member server
    http://technet.microsoft.com/en-us/library/dd638206.aspx
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • IWeb and uploading jpegs with spaces in their names

    I have created a site with about 100 jpegs that I wish to load up to a server other than ".Mac". Some jpegs have spaces in their names, so "Fetch" will not upload them. I deleted the spaces from their names and loaded the jpegs back into the site and saved and published to a folder. However, the resulting "Site"folder shows the jpegs still have spaces in their names, even though I removed them from the name of the jpeg. IWeb must be getting the name from some internal tag or something. For example, I had a jpeg called "Billie Holiday.jpg" I changed the name to "BillieH.jpg", but when I publish the site to a folder, the jpeg still shows up as "Billie Holiday.jpg" and therefore I cant upload it using "Fetch". Where is iWeb getting the names of the jpegs from, and how do I remove the spaces? Or, does anybody know of an application that can upload files (ftp) with spaces in their names?
    Thanks,
    Mitch

    However, the resulting
    "Site"folder shows the jpegs still have spaces in
    their names, even though I removed them from the name
    of the jpeg.
    Very strange. You might try renaming the site with Inspector to something else than Site and republishing, to guarantee you have a totally new set of files.
    Or, does
    anybody know of an application that can upload files
    (ftp) with spaces in their names?
    It's not the ftp program. You can't have spaces in file names on most web servers, they won't accept the files.

  • Safari extremely slow and pages load with errors

    Not sure if this is related to other Safari posts, but when I try to load a page from many sites, including this one, the speed is extremely slow and there are invariably errors reported on the bottom status bar. I'm on a new Mac Pro, and I haven't added any add-ons to Safari or changed system settings. My internet connection is DSL on ethernet, and there are no problems with email or on my old G4 using Explorer 5.1. At this point G4's Explorer is light years faster than Safari on this machine. I'm going to try Mozilla Firefox, but is there any hope for Safari?
    Thanks,
    Peggy

    Hi Peggy
    Welcome to Apple Discussions
    Try this to speed up Safari.
    First, make sure you are not using Rosetta. Go to Safari's info panel (Application folder>Safari.app>Single click>Apple Key I). If Rosetta is selected, uncheck it.
    Network Connection
    Go to the System Preferences>Network panel
    - Location - set up a personal location by clicking on the drop down menu and selecting "add a location". Use a name familiar to you. Once established, select "apply".
    - Next, click on the "Show" drop down menu and select Network Port Configurations. Only Ethernet ought to be checked. Move it to the top of the list (you can drag it). Select "apply".
    - Back to the "Show" menu, depending on your connection select "Ethernet". Click on the TCP panel. There, enter 4.2.2.1 and 4.2.2.2 (separate lines) in the DNS servers box and select "apply".
    Creating a personal location, plus adding the DNS codes seems to speed things up. Otherwise, the "automatic" function has a tendency to "search" for available locations.
    In the Finder, go to your Utilities folder and select "Terminal". Once the screen is open enter lookupd -flushcache and press return. This clears out the DNS cache. Once done, quit Terminal.
    Post back

  • Bug in the copy cluster roles wizard - CSV reparse points cannot have names with spaces

    Hi All,
    I have identified a bug in the copy cluster roles wizard in 2012 R2, which is preventing me from migrating my clusters from 2008 R2 & 2012 to 2012 R2.
    The bug surfaces when you attempt to copy a VM role from a 2008 R2 or 2012 cluster that has a CSV reparse point name that contains spaces as follows:
    The role appears to copy across fine, but once you've migrated the CSV and brought it online followed by starting the VM, the VM configuration resource promptly fails along with the VM.
    The issue can be spotted inside the copy cluster roles wizard, where it presents itself by removing all text after the first space in the name to read "C:\ClusterStorage\CSV" rather than "C:\ClusterStorage\CSV
    Test Disk 3" as follows:
    The bug only appears for VMs on CSVs with a reparse point name containing spaces - all other scenarios succeed.
    After searching through the registry on the new cluster, you can clearly see that the VM role hasn't been correctly copied.
    It shows a value called SharedVolumeMappings with the data C:\ClusterStorage\CSV|<guid>|<integer>
    Whereas it should show the data C:\ClusterStorage\CSV Test Disk 3|<guid>|<integer>
    If you modify the data in the SharedVolumeMappings value in both
    0.Cluster\Resources\<VM guid> and Cluster\Resources\<VM guid> keys, the VM will start and work correctly.
    The problem for me is that I have many VMs on many different CSVs all with spaces in the names of the reparse point! Its not feasible for me to go through the registry for every copied VM on every node of the new cluster, as this would take a very long time
    and would be prone to errors that could cause further problems.
    Can anyone provide any help on this? A hotfix for the issue would be great, if anyone from Microsoft is reading :-)
    My deadline to get the VMs migrated to the new cluster is the 21st February, so I would really like to have a solution to the problem before then if at all possible.
    Many thanks in advance,
    Tom

    Hi Subhasish,
    Thanks for the reply, glad that its something that is reproducible!
    Do you have any idea of timescale? Or is it likely that I will have to modify the registry as above to get this working?
    If I am going to have to modify the registry, please can you let me know if the resolution I have tested above is safe and viable? Or are there other settings that I will need to change to make the cluster fully aware of the proper path to the CSVs for its
    VMs?
    Also, is there a known procedure for renaming the reparse point whilst VMs are running on it? This would allow me to negate the issue before copying the roles to the new cluster :-)
    Thanks again,
    Tom

  • Document library: File name with spaces at EOF

    I noticed a strange issue with uploading files with space at end of file (example "ABC  .xlsx"). Such files are allowed to be uploaded for the first time but when the end user (with contribute permission) tries to upload the same file again
    (overwrite) then it uploads the file and goes to the next dialog box where properties for the form is collected (EditForm) and then when user tries to hit save, he gets "Sorry this site is not shared with you" error. The owners (with Full control
    permission) get the error message that the file needs to be renamed. 
    This does not happen with files having proper names. The files are automatically overwritten as expected.
    Is it a SharePoint bug or am I missing something ?

    Hi Prakash,
    When we upload a document which contains spaces at the end of the file name, then SharePoint will trim out the spaces in the Edit Item Form, so the name for this document should be “ABC.xlsx”.
    When we re-upload the document to SharePoint, because of that extra space it sees the filename(ABC  .xlsx) as different to the existing document (ABC.xlsx) so it adds it as a new document.
    And in the edit item form, the space has been trimmed out. Because there is already a document with that filename in the document library, it throws the error.
    So this issue is by design that SharePoint uploads the document first and then edit the properties of the document.
    For more details, please refer to the link below:
    https://discoverlars.wordpress.com/2012/10/27/sharepoint-doesnt-overwrite-a-document-with-the-same-name-but-creates-duplicates/
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Question about "Get Web Drawing URL and Page Name From" for Visio Web Access

    I am trying to get both the web drawing URL and the page name from a list through Share Point Designer 2013, but it doesn´t work.
    It looks fine when a do the web part connection wizard. I select from which columns to get the URL and the page name. But on the final web part page nothing happens. It just shows the URL that is selected in the Visio Web Access Web part. I had hoped that
    that value should be overrided by the SPD-settings.
    I have googled for hours..

    Hello,
    I have now saved the Visio-file in .vdw-format, but it says Visio 2010 Web Drawing (*.vdw). Is there a .vdw-format for 2013? Isn´t that the .vsdx-format?
    Still doesn´t work with the .vdw-format, but maybe I am doing something wrong.
    Any ideas?

  • Handling property name with spaces in SQL query

    Hello,
    I have some JSON that looks like this:
        "SystemId": "112234",
        "Parameter": {
            "Total Hours": [
                    "timestamp": "2015-03-15T15:20:00Z",
                    "itemValue": "0"
                    "timestamp": "2015-03-15T15:15:00Z",
                    "itemValue": "296"
    ..and am having trouble with the space in the "Total Hours" property name.  When executing a SQL query, I have tried to reference it as ["Total Hours"], [Total Hours], and "Total Hours", but none of these works.  I
    have also reviewed the "Querying DocumentDB" and "DocumentDB SQL Query Language" documents, but am unclear on how to escape this space.  As this is valid JSON, I would expect to be able to handle it via DocumentDB SQL query, but am
    not certain what I am missing.  
    Thanks for your help.
    Please remember to mark replies as answers if they help you.

    Given that the property with the name with the space contains an array, I attempted to query using:
     SELECT * FROM c WHERE c.Parameter.c["Total Hours"][0].timestamp = "2015-03-15T15:15:00Z" and a few other permutations, but no luck.  Did I misunderstand?
    Please remember to mark replies as answers if they help you.

Maybe you are looking for