Indesign 5.0 question

Hi,
I watched tutorial video about setting up some basic interactivities.
I have a question about that kind of "interactive map" - you click
on different objects (dots) on one side of screen and the picture
on another corner changes accordingly.
Is this available on Indesign CS 5.5 only? Because I cannot make
it work, even though I am using "Button" with proper action in Indesign 5.0.
But when I preview the .folio file, the button doesn't work. When I have
a "presentation" active, the photo changes when I tap everywhere,
but then I cannot go to previous page. If a "presentation" is inactive,
the button doesn't work and the image is still the same (or better said
if I move to this page where the button is, it goes right to the state that
the button is adjusted to and nowhere else).
Am I doing something wrong or does this feature work only in CS 5.5?
Thank you for some hints in advance.
Cheers!

If it's the video I think it is, that interactive map was done using a multi state object with some invisible buttons over the artwork.
Bob

Similar Messages

  • I have an Adobe Indesign to Photoshop question - Smart Objects

    I have an Adobe Indesign to Photoshop question - Smart Objects
    I am copying and placing InDesign photo silhouettes and placing them into a Photoshop document for an online graphic.
    I believe that the color holds up very well. It's when the JPG goes through a CMS ingest that the colors warp. A photo technician is able to correct the color.
    I just need to get some insight on my process that (I think) I invented - since I don't see any discussions or videos online that back me up.
    Any thoughts - or who could I access that might have an answer for me.
    Thanks!

    You haven't invented anything. Your server-side processing (based on something involving ImageMagik with PHP most likely) is simply stripping/ ignoring color profiles and converting the colors. This is very much the same issue as in your other post - your procedures just don't realyl make sense and you're basicalyl screwing yourself by using this methodology.
    Mylenium

  • Photoshop images with spot channels in Indesign CS6 (layout question)

    I've got an Indesign CS6 layout that will have a spot varnish when it goes to press. Right now I've got a layout with psd files that have spot channels in them that will be used for the spot varnish.
    My question is, in Indesign when I'm laying this out should I have one layer with all the psd artwork (with no spot channels) and then a layer on top of that with the psd files with the psd layers turned off with the spot channel showing? I want to make this easy to print in the office so by doing it this way I could just turn the spot layer off and print.
    Will this work for the printer?
    layer 1 psd files with no spot channels
    layer 2 psd files with photoshop layers turned off with the spot channel showing

    Besides the obvious extra work of tracking 2 images, there would be potential problems if the images needs to be scaled and moved, and you would have to assume people downstream would know what's going on—should the layer be on or off?
    I would double check with the current printer—they should know the only way to view a spot is via Sep or Output preview by turning CMYK off—magenta could just as easily be process as  spot.
    Take a closer look at the Alias method. Here it is with your magenta defined SPOT VARNISH.
    With SPOT VARNISH set as No Alias in Ink Manager and with Overprint turned on:
    And with an additional spot color defined as white named CLEAR VARNISH. When you need to print in house alias SPOT VARNISH to CLEAR VARNISH and check Simulate Overprint in the Print dialog. You can get to Ink Manger via the Print>Output dialog or Swatches panel:
    All you have to do is delete the CLEAR VARNISH before sending the job to the printer or exporting

  • Indesign Grep style question

    Hello,
    I have a question about Indesign. I want to make the text after a certain character like a hair space for instance bold. This must be set in a paragraph style. I think this can be done with GREP styles. I have tried several things but it doesn't make sense to me.. Does anybody know if this can be done or is there a better way to do this?
    Thanks!

    Apply 'bold' character style to text:
    (?<=~|).

  • Incopy/indesign version compatibility question

    Hi all,
    I feel like this should be something easy to find in Adobe's information, but I couldn't find it.  Maybe I'm just slow.
    OK, we are a small (free) weekly newspaper.  The person who puts the paper together uses InDesign CS5.  We do not currently have InCopy.  We would like to get InCopy for one of our editors, to work with in the documents made by the person with InDesign CS5. 
    My question of course being...since we can apparently only buy InCopy CS6 now (maybe 5.5 if we really hurry) will it be able to work with the older version of InDesign, or would our InDesign need to be updated to CS6 as well?
    Being a small free paper, we cannot afford to do that...thus my question.  While I understand I could have called an Adobe rep, I don't have time to deal with a sales person at this point, just trying to gather information for my boss.
    Thanks!

    Hurry and buy CS5.5 now. You can work that with one exception. Remote packaging won’t work.
    Dropbox is very good alternative to that. But again. HURRY! Come Monday CS5.5 won’t be available and nothing will work.
    You should be eligible for a free upgrade to CS6 as well.
    Bob

  • FrameMaker 8 versus InDesign CS 3 Question

    This may seem like a silly question, but we need to ask it.
    We have been building our technical manuals, books, and training materials in InDesign for quite a long time.
    Is there a benefit to switching to FrameMaker for our technical writing needs?
    I only stumbled onto the product site when looking for screen capture utilities via the Captivate 3 product page.
    Any input would be greatly appreciated.
    Thanks,
    Philip E.

    Hi, Philip:
    I don't think you've stated why you're considering other solutions than the InDesign one you're already using. If you could state your satisfactions and dissatisfactions with ID it would be helpful to you, as well as to anyone who might have a suggestion or recommendation.
    I looked at the comparison at http://www.adobe.com/products/framemaker/comparison.html
    and found marketing-speak that clouds some of the information. There's also some comparison of features that aren't close-enough counterparts to be compared. Finally, some third-party tools are mentioned that supplement FM, but some that supplement ID aren't mentioned; for example, cross-references.
    One example of an incomplete comparison is drawing tools. You can do a lot with FM's rudimentary drawing tools (they were advanced when first introduced, but they haven't evolved.) ID's drawing tools are Illustrator-class.
    If your workflow uses external tools and simply places them into your documents, superiority or inferiority of the drawing tools are a non-issue. Similarly, other aspects of your workflow may indicate which features of which product should carry weight when deciding on the most appropriate tool.
    RE: Thomas Bro's points:
    * InDesign lacks FrameMaker's ability to apply master pages depending on body-page content; however, FM added this recently - in the past it was available as a third-party tool. ID's designed as a container of plug-ins; there are many third-party tools extend it, both plug-ins and scripts. ID's also designed to be scripted by relative amateurs as well as professional developers.
    * There's a cross-reference plug-in for ID, from dtptools.com, that's a bit more advanced than FM's built-in. Like FM, they become links in PDF documents.
    * Although ID currently lacks conditional text, XML manipulations can do the same thing. In fact, there are third-party XML tools for FM that claim to offer more conditional flexibility than FM itself.
    (PS: Thomas, I read a long time ago about someone who wrote, as well as edited and reformatted, documentation in DOS's EDLIN, where each line ends with a carriage return, and almost all operations require special trigger keys to perform them! It's only one or two steps above cuneiform.<G>)
    If you need to create online Help systems, FM's the clear choice for the simplest path through well-proven tools. XML from ID could be used to work with help tools, though it's not a a common path yet.
    HTH
    Regards,
    Peter Gold
    KnowHow ProServices

  • InDesign Data Merge Question....

    I have a calendar created using the data merge feature within InDesign.  The only question I have thus far is on each day of the week, we currently have a text frame linking to a .txt file that our customers add events to.  How do I link the specific .txt files to the frame?  I cant use the image function in my excel file as it does not reconize it as that.  Is there another way to script/put this in my source file to link and place the text in the .txt files (individual txt files for each day of the year).??  Any help would be appreciated.  Thanks!

    I don't think I really undertand the structure of the data file you have. My sense, though is that this may not really be a data merge project.
    At its heart, Data Merge is is very primitive. It's great for mailing labels, but can get defeated by more complex projects. For the merge to work, all of the data must be structured the same for each record in terms of the number of fields, and the text you want to include needs to be in the fields (as far as I know, you cannot use a pointer to an external text file in a field the same way that you can use a pointer to an image). You have a choice when setting up the merge template, though, of putting the plceholders on the document page or on the master page.
    If you put the placeholders on the master page, the data can be updated AFTER the merge, at least in theory (doesn't seem to work well with images), but it doesn't really sound to me like that's what you need, but it is a possibility if you have a basic documenet and the clients add text later.
    In any case, if you are letting the client add text, you need to add that text directly into your data file, either in Excel and re-export the entire data set, or set up some sort of find/change routine to replace tags in the text file with the text supplied by the client.

  • InDesign - poor performance question

    Hi,
    I've been working on a little project, trying to learn InDesign. It's been working fine until yesterday. At a poing the application/document started to perfom very badly, like it hangs a lot. I don't know enough about InDesign (yet) to know what's causing it, and I was hoping that maybee someone else has seen the same thing.
    This happened: I have some master pages, and from those I have created a 8-page brochure with spreads. I have added backgrounds and text elements, and I have added some products. Now and then I have exported a PDF (Press Quality) to look at the results. Yesterday, I started the PDF export, but before I finished it, I hit cancel (on the last screen before the file is written). After that, the performance got noticeably worse. It probably doesn't have anything to do with it, but at least now you know what happened just before
    When I try to place a new image into the document, the response is terrible. From I move the mouse until the image actually moves on the screen, it takes over 1 second.
    Naturally, I have tried to save the document, restart InDesign, close all other open applications, reboot the computer and other obvious things.
    Here's a shot screen video showing the flickering:
    http://www.tubaplayer.com/files/InDesign_flickering.mov
    Oh, and I'm on a Mac, Leopard OS, CS4, all updated with all available updates.

    Oh Sorry for all these technical terms
    spreadsheet, oops I used an Excel term into Indesign, I meant only "sheet" or, right, "document",
    clipping path, well a path that hides the pixels out of itself, in order to create transparency around an object, that anchor points are these little squares that are around the path that are used to modify the path (by dragging them).
    Make a test: open some of you pictures in Photoshop, reduce the size as they will be in your document (if for example the shovels are 2'' high, go to image-> image size,  tick the "resample" box and change the image size to 2 inches high@ 300 dpi,). Press OK
    with the magic wand tool, select the white background, go to "selection" and choose "invert" (not sure the term, my CS is in French)
    go to the "path" panel and scroll down the option menu-> choose "convert to path" use 1.0 tolerance, that should be enough (if you want a more accurate path, decrease this value). press OK
    double click on the thumbnail image of your path, eventually name it. press OK
    Make the same stuff for a dozen of images save all the file in Photoshop .PSD
    Try to reimport the resized images in Indesign and check if the flickering effect is still there, if not, you will need to put all your images on a diet .
    If you fill lost with clipping path, there are some good tutorials through the net.

  • InDesign CS6 Forms Question

    Wondering if any of you out there have been using the new forms options in InDesign CS6. I have been working on some forms and created a bunch of text fields for people to fill in. What I discovered was that when I exported and tried to put text in the fields in Adobe Acrobat Reader, it wouldn't save the form (it will let you print but not save). The filled out form can be saved in the full version of Adobe Acrobat, but with Reader I am having difficulties. On Adobe's website, they say that filling in fields and saving is possible in Reader, the document just needs to be "rights enabled". I am having a difficult time figuring out how to export my PDF from InDesign CS6 so that it is rights enabled. Has anyone run into this before? How do I remedy this?

    I think that you can reasonably assume a 64-bit future for InDesign, but not as an InDesign 8 (CS6) update. For MacOS, transition to Cocoa from Carbon was necessary for this to occur.
    Note that there are in fact limited benefits of 64-bit over 32-bit. In general performance with 64-bit is not necessarily better than with 32-bit. There are cases where 64-bit performance actually can lag a bit behind that of 32-bit. The real benefit of 64-bit is the ability to have larger address spaces, thus eliminating problems that can occur with very large, very graphically complex documents when InDesign and its component graphics libraries run out of address space for content, work areas, etc. and either the program fails or has to spill out into work files.
              - Dov

  • InDesign CC 2014 Question

    How's it going guys. I'm fairly new to using InDesign and I have a task that was handed down to me. We are having our company logo printed on vinyl that will be placed on lexan for a large backlit sign.
    These are the size specs of the sign:
    Actual Size = 335.5" x 47.5"
    Live Area = 332.5" x 44.5"
    The artwork has to be in either PDF or EPS vector. I've worked with InDesign a couple of times before, but I haven't dealt with anything in this size. Do I just use some type of scaling system? Lets say make the file size 20% of the actual size of the sign?
    Any help will be greatly appreciated.
    Thank you,
    Roberto Taylor

    Thanks for the quick reply. Given the size of the job, is there a specific scale you would recommend? 50%? 20%?
    Thanks again.

  • InDesign XML traversal Question?

    Hi All,
    I've the three types of the XML structure in Input XML,   the above snapshot for your easy references. The problem how to identify the three pattern of XML in InDesign CS5.5 using Javascript.
    Sample 1 has the <p> tag with some para contents after that the list tag was started.  Script eg:  myElement.xmlElements[0].markupTag.name will gives the name of the first xmlelement inside the <p>,  but how to differentiate if the para has immediate list element or few para text is there after that the list comes ?
    Is there any possibilities to identify?
    Thanks in advance.
    Imagine

    InDesign's limited subset of xpath 1.0 for .evaluateXPathExpression() makes it impossible, I think, to do this that way.
    var doc = app.activeDocument;
    var root = doc.xmlElements[0];
    var elements = root.evaluateXPathExpression("//p[node()[position() = 1 and not(self::*)]]");
    That should get you your first example—all <p>s whose first child node is not an element node. It seems like it works.
    var elements = root.evaluateXPathExpression("//p[List[not(following-sibling::node())]]");
    That should get you <p>s with <List> children without following siblings, which should match your third example only, but matches all three.
    My xpath is rusty, though. Maybe someone else has a better idea. I suppose you could do it by comparing the index of each child element's .xmlContent.
    I think if you applied a transform as you imported the xml (where InDesign offers a fuller xpath processor) and marked these different scenarios with an attribute it would work.
    Jeff

  • InDesign:  Opening documents question

    Hello,
    I have recently upgraded to ID CC 2014 from CS 5.5.  When using 5.5, ID presented  me with a window displaying recent files, allowing me to choose the file I wished to open.  I don't see that on the most recent version, and I miss it.  Is there a Preferences Setting that turns that option on and off?  I've looked around in Preferences but don't see anything there about this.
    Thanks,
    Patrick

    I have not presented a good description of what I am trying to do.  I don't have the vocabulary to describe it, but I think of it as a "Splash Screen".  I know that I can open recent documents from the menu (File/Open Recent), but what I would like to do is open recent documents from this "Splash Screen" instead.  Since I don't know the correct term for what I am calling a "Splash Screen", I am uploading a screen shot to show it as it appears in InDesign CS 5.5.  The documents are listed as three.idd, two, indd, and one,indd.   Is there a way for me to get that back on the most recent version of InDesign?    I am using a mac running Yosemite 10.0, if that matters.
    Thanks....Patrick

  • Indesign Portfolio SWF Question

    I followed this tutorial:
    http://blogs.adobe.com/indesignpost/2011/01/creating-an-interactive-portfolio-with-indesig n/
    When I open my swf file the first page has the button I created and is awesome, then I click on the button and it shows the first work that it should......BUT for some reason that I have no idea why; the buttons below the image are gone.
    The buttons are not invisible, they are completely missing.
    After reading the tutorial (or just being a pro in indesign), what did I do wrong and how can I fix this problem?

    Jeffrey, your comments are certainly dead on for CS4 but CS5 has far better capabilities. I'm no expert on this but much of the interactivity in the ID file will survive an export to FLA to be opened in Flash Professional CS5.
    Bob

  • Indesign cs6 general question

    hello indesigners.
    after all the waiting for indesign cs6,is it still 32bit anot not 64bit?
    just asking because im reading alot of opinions on the internet.
    thank you.

    I think that you can reasonably assume a 64-bit future for InDesign, but not as an InDesign 8 (CS6) update. For MacOS, transition to Cocoa from Carbon was necessary for this to occur.
    Note that there are in fact limited benefits of 64-bit over 32-bit. In general performance with 64-bit is not necessarily better than with 32-bit. There are cases where 64-bit performance actually can lag a bit behind that of 32-bit. The real benefit of 64-bit is the ability to have larger address spaces, thus eliminating problems that can occur with very large, very graphically complex documents when InDesign and its component graphics libraries run out of address space for content, work areas, etc. and either the program fails or has to spill out into work files.
              - Dov

  • InDesign Mass Mialing Question

    If I design a formin InDesign (CS4) and want to put different addressses (and other info) think a postcard/self mailer with subscription expiration dates or somethgn likethat, can this be done wiht information that is on a mainframe computer database? Not sure if I worded that correclty, but basically I want to do a mial merge off a main frame into a form I deisgn in InDesign. I'd like to do this onto a Docutech that runs high volumn. Thank you.

    You can use Data Merge, to do this.
    take a look at this link
    http://www.adobe.com/designcenter/indesign/articles/indcs2at_datamerge.html
    Andy barrington
    www.barringtonprint.com

Maybe you are looking for