InDesign Application Not Responding

I multitask a lot, but lately when I work on another application and return back to InDesign it says the application isn't responding. I'm using CS5.5 on my Mac running Mac OS X. Illustrator also does this to me, but not as often.

i have the same, but cleaning pram might help,restart with cmd-alr-p-r pressed untill you hear apple restart tone. Keep m pressed until you heard it three times.

Similar Messages

  • "Application not responding" when trying to open InDesign CC 2014

    I installed InDesign CC 2014 and whenever I try to open it I get the "application not responding" message. Help!

    No system information, no help. We need to know a lot more...
    Mylenium

  • InDesign won't open. Application not responding.

    I updated InDesign today. Now it won't open. Application not responding.

    From what I have been reading from other posts on this forum, the
    issue may be caused by the clear history settings. It was suppose
    to have been fixed in v30.
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    Type '''about:preferences''' in the address bar and press '''Enter.'''
    Select '''Privacy'''.
    The button next to '''History,''' select '''Use Custom Settings'''.
    At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
    At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
    '''Form And Search History''' leaving the others off.

  • CC InDesign 2014 not responding.

    Message says "CC InDesign 2014 not responding."
    Application InDesign is not responding. Can not open it in CC.InDesign

    Hi Tfen10,
    What is the operating system you are using. Are you getting any crash logs?
    Regards,
    Nikhil Gupta

  • Application not Responding - CS5, OS10.6.8

    If I have a CS5 application running w/ a document open, and switch to another running application, when I try to go back to the CS5 app (click on the document window or select the icon in the dock), I often get the spinning beach ball and the "Application not Responding" message (if I control/click on the dock icon). I need to Force Quit the app & restart. Happens frequently in InDesign, Illustrator & Photoshop. I'm on a MacPro w/ 6GB ram. Anyone else experiencing this / have a solution? - thanks

    John, I deleted Extensis Suitcase Fusion and re-installed InDesign. It worked for a short time and now its crashing again. The crash report is still showing the problem to be Suitcase. What else can I do to get rid of all traces of Suitcase.
    Bruno is correct, un-installing InDesign doesn't remove the Suitcase Auto-Activation Plugin from InDesign.
    0xa9b9000 -  0xab39ff3 +com.extensis.AutoActivationPlugin.ID7 (3.0.4.11 - 3.0.4.11) <C60215EF-E853-7053-497C-7AC0D279746A> /Applications/Adobe InDesign CS5/*/ExtensisFontManagementIDCS5
    I'm not sure why it is indicated with a * instead of a precise folder name, but that's saying there is a ExtensisFontManagementIDCS5 plugin (probably in the Plugins folder!) inside /Applications/Adobe InDesign CS5 that is causing the fault. So if that's still there, remove it. (Perhaps Manage Plugins from Suitcase will do it for you. I'm not really familiar with Suitcase. But you can just remove the file by hand).
    By the way:
    Version:         7.0.0.355 (7000)
    You really should update InDesign to the current patch release, 7.0.4. There are quite a lot of bugs in 7.0.0 that have been fixed. (Perhaps you had updated previously but those were lost with the re-install...)

  • I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding"

    I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding" and I try opening it in my Finder and it'll say "The Application 'Safari' cannot be opened." and below that it'll say "-1712" Please help? I would really like to open it again.

    The application Safari can't be opened -1712
    What to do about "The application 'Safari' can't be opened" -1712 ?

  • Help please-"Application Not Responding" for Safari and Mail

    I read in one discussion that if Safari is slow, you can go to Font Book and select the fonts with a bullet to get rid of duplicate fonts. I did that, and then decided to disable some japanese fonts I don't use.
    Now Safari and Mail don't work. Mail won't open at all, and Safari launches but doesn't load and I get the spinning wheel.
    I used Disk Utility to fix permissions, and that didn't solve the problem, and now my Disk Utility also says "Application Not Responding".
    I also went back to Font Book and enabled all the fonts I disabled. Still nothing.
    ( I can use Netscape-so it's only Mac applications I guess)
    Any help is very much appreciated.
    Thanks!
    powerpc g4   Mac OS X (10.3.2)  

    I read in one discussion that if Safari is slow, you
    can go to Font Book and select the fonts with a
    bullet to get rid of duplicate fonts. I did that, and
    then decided to disable some japanese fonts I don't
    use.
    Now Safari and Mail don't work. Mail won't open at
    all, and Safari launches but doesn't load and I get
    the spinning wheel.
    I used Disk Utility to fix permissions, and that
    didn't solve the problem, and now my Disk Utility
    also says "Application Not Responding".
    I also went back to Font Book and enabled all the
    fonts I disabled. Still nothing.
    ( I can use Netscape-so it's only Mac applications I
    guess)
    Any help is very much appreciated.
    Thanks!
    powerpc g4 Mac
    OS X (10.3.2)
    Wow- i fixed it! I remembered that when I was in Font Book originally, there were some fonts disabled, and I enabled them.
    I couldn't remember EXACTLY which ones, but I disabled some I thought were the ones, and VOILA!
    Mail works, Safari works...what a relief!
    And it only took me HOURS...oh well.
    If this might help anyone, here are the fonts I disabled again-
    BeteNoirA Regular
    BoyzRGross
    Chrome Yellow
    Coventry Garden
    FancyPants
    HardlyWorthit
    PleasinglyPlump
    RaggMoppRegular
    Anyone know if I should throw these fonts away? maybe a stupid question, but I'm not very good at this stuff and hesitate to change anything.
    powerpc g4 Mac OS X (10.3.2)

  • Microsoft Word Freezing Repeatedly, Application Not Responding

    Just wondering if anyone else was having issues with Microsoft Word from MS Office 2008, where you open the application, you type a few sentences, and the application freezes with the spinning circle of death that won't go away until you click the dock where it says "application not responding" and do a force-quit? You can leave the circle spinning for 10-20-30 minutes, and it never goes away.
    Now for the weird part--this error only happens for me when I'm using a specific document on my computer. I can open Word, start a new document, type several paragraphs of text, and it works fine. But I've been working on an existing paper for about two months that all of a sudden started causing these freezes/crashes when editing it. It's about 30 pages roughly, no images, no big inserts that would take up a lot of memory (116 kb in size). And up until today, there were no problems. So why all of a sudden can't I edit anything on this paper without freezing the program?! I downloaded the Microsoft Office 2008 Service Pack 1 that was just released after this problem started, and ran all the recent Java and program updates through Software Update with computer restarts. I even copied the text from the Word document I was working on, pasted it into a new document, tried saving it as both .doc and .docx, and again the program still freezes when working with that text in a new file. This one baffles me. It's like the text within a document is somehow freezing the application. One thing I did notice is that the freezes seem to happen when I'm scrolling using a mouse wheel. Not always, but quite a bit. I suppose this is some memory issue related to several pages of text that the program can't render or process when you add new lines of text or scroll, but again, I can't figure why this paper I've been working on for months all of a sudden decided to start freezing Word today. Can you really only have 30 double-spaced pages of text in Word before it crashes?
    Looks like I've found my reason to switch to Open Office, since I'm 3-4 days out from a deadline. Any other solution strategies would be welcome. Thanks.

    Same problem here - Microsoft Word 2008 (update 12.1.7) will open fine, and then start the spinning pizza of death. Only way out is to force-quit the app. I've tried:
    1) deleting plist and font cache files
    2) uninstalling MS Office 2008, reinstalling and then re-applying updates 12.1.0 and 12.1.7
    3) confirming that Apple's Font Card.app can verify all fonts
    No luck. Currently I can't open any MS word doc without the spinning pizza of death.
    If you are lucky enough that these symptoms only happen with a specific Word .doc file, I would see if the PC-originator could re-save the file as .RTF and resend. If you can then open it OK, you could revert back to .doc (or .docx) format. RTF format is Microsoft's interchange format. If there are anomalies in the .doc file, saving as .RTF can sometimes clean them up. Once done, you can revert back to native MS Word format.
    ...b

  • Mouse over dock icon no longer indicates "application not responding"

    A very convenient feature seems to be missing from Snow Leopard. In prior versions, if an application was not responding, holding the cursor over its dock icon would display "[Application] Not Responding" and also an option to Force Quit. This status message does not appear in Snow Leopard.
    Are we to assume that if we click and hold on a dock icon and "Force Quit" is presented as an option, that the application has stopped responding?
    Suggestions?

    drdocument wrote:
    Thanks!
    So if I click and hold a dock icon and "Force Quit" is shown instead of "Quit" would that indicate that the particular application is in the midst of some process and simply unable to respond?
    Should I simply allow more time for the app to finish whatever it's doing?
    it could be either. sometimes an application is busy and is showing as not responding but will come out of it after a while. but sometimes it's truly hanging and then you have to force quit it to get rid of it. there is no way to tell just by looking at the dock. give it a bit of time and if it's still not responding then force quit. but if it's happening all the time then you may have problems with your system.
    In particular, here, I've launched DiskWarrior 4.2 on a Mini (via Screen Sharing from my Mac Pro) in an attempt to rebuild directory on a My Book 1TB external drive connected by FireWire, which Disk Utility indicates needs repair but DU cannot repair. Ideas?
    so what does disk warrior say when you try to rebuild the directory? and you should also verify the internal drive on the mini too.

  • ITunes 11.2.1 freezes when I connect my iPhone 5. 'Application not responding'

    Hi,
    Recently I upgraded Mavericks. Since then I cant sync my phone anymore. iTunes works fine untill I plugin my phone. Then the spinwheel comes up and stays there forever. In dock it says 'Application Not Responding'.
    iPhone 5, iTunes 11.2.1, Macbook Pro 10.9.3 2.6 GHz 8Gb
    Does somebody can help me out? That would be very very nice!

    Hi BlackNikes
    I had exact same problem, but have now resolved it. If your problem is the same as mine your SyncServices folders have been corrupted while itunes was updated.
    See my post or spyder683 post at https://discussions.apple.com/thread/6223064?start=60&tstart=0
    I am running Mavericks 10.9.3 and updated itunes to 11.2.0 and then experienced problems with itunes crashing, 11.2.2 didn't resolve the problem. I found iTunes worked fine if all my other devices (iphone, ipad, ipod) were turned off, as soon as I powered any one of them up and itunes detected them over wifi or USB itunes then froze with the dreaded colored ball spinning.
    In Mavericks 10.9.3 the SyncServices folder is not visible going into the normal library/Application support folder, your instructions below took me to a different area in the system, or at least made these folders visible. Following your instructions I was able to locate and delete both SyncService & SyncServices folders and I launched iTunes again while my devices were powered up and the issue has gone. Bliss!!!
    Many Thanks
    spyder683 wrote:
    Hi Culero,
    The fix of deleting the SyncServices folder is for Mac systems. From your desktop / finder, click the "Go" menu at the top, then "Go to Folder ..." Paste this into the field: ~/Library/Application Support
    The SyncServices folder should be in there. I had both a SyncService and a SyncServices folder. The second one should, when deleted, help with the problem you and I both had of iTunes freezing when an iOS device is plugged in.
    Hope this helps

  • Itunes application not responding when I plug in my iphone

    I am on itunes 8.2 and when I plug in my iphone itunes just goes into application not responding.
    I wait for a while and then unplug the phone and it goes back to working again.
    On the phone there is no "Sync" message. In fact with the phone plugged in I can access the phones apps just as if it was not plugged in.
    But initially when I plug it in, it does the double vibrate and shows the charging graphic so I know the cable is ok.
    The phone is already on 3.1 apparently because some new features are there... like selecting multiple photos to email.
    But I don't recall ever running any updates in itunes to make it use the new software as I read you were supposed to do.
    I don't want to upgrade to itunes 9 because I read so many people having problems with it... but I wonder if the phone is no longer compatible with itunes 8.2
    Any help is appreciated.
    Thanks.
    -Jeff

    Do you know if the problems people have reported with itunes 9 was before the 9.1 release?
    I've heard tons of people saying they were reverting back to itunes 8.2 because 9 was so bad.
    Am a bit nervous about that update because of that.
    But an applecare guy told me that the 9.1 was supposed to address those issues. I have just not heard anything about that actually fixing things though. Still seems like a lot of people are dreading the new itunes 9.
    If you are an itunes 9 user, did you have any problems with it wiping out your library or any terribly long syncing times?
    Thanks.

  • Can't Open 3rd party Apps with my User (Icon Bouncing then Application Not Responding)

    Hi
    Problem:
    I can't Open 3rd Part Apps with my user (FireFox, Chrome, Dropbox, GoogleDrive, Mega, Final Cut Pro X, etc) they just star bouncing and after a while they stop bouncing then i righ click on them and it says "Application Not Responding", but i can open native apps like Safari, iTunes, iMovie, Finder, Settings
    Other Events:
    -Just Before this happend i was editting a video on FCPX, y export it and tried to upload to Google Drive (in Chrome), when it was uploading I closed FCPX and the uploading stop it at 91%, y tried to reupload but then I realized that this video was in a temp folder and it wasnt there anymore, so I open FCPX to export it again and i couldnt, it was just bouncing and then "App not responding".
    -After Installing Yosemite i feelt it slow even after it finished the encriptation File Vault, specially in chrome.
    I have tried:
    1-Repair Disk Permisions
    2-Reset SMC
    3-Reinstall FCPX
    4-Decrypted the Disk and create another user and i was able to run Chrome, FireFox and FCPX, When I opened FCPX it started but when it was trying to open the project that i was working , it restarted the app and i couldnt open FCPX again, just bouncing and App Not Responding
    Any suggestions to keep my User working?
    Macbook Pro Mid 2012
    -OSX Yosemite,
    -16GB Ram1600MHz DDR3
    -750GB 5400RPM
    -2.9GHz dual-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 4MB L3 cache

    Yes, as long as you let TM do a full disc backup (that is, you do not exclude anything in the TM backup settings) you will have a backup that allows a full system restore - puts everything back just as it was.
    You can also clone your system using the shareware app SuperDuper or the donation-ware app CarbonCopyCloner
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    http://www.bombich.com/
    Both of these apps will make a true clone (literally, a bit-by-bit copy) of your hard drive onto an external drive.  This clone will actually be bootable itself (you plug in the drive and hold the option key during startup then select the clone to boot from).  You would boot from the clone, then reverse-clone it back onto your internal hard drive.
    If you are really serious about being highly confident of not loosing files, you could use both  - I keep a TM backup on one drive, and 2 clones on separate bus-powered hard drives.
    P.S. even if you had not had any issues, you really, REALLY should be keeping regular, up to date backups anyway - things go flooey without warning sometimes and you risk loosing everything on your machine if you DON'T keep regular backup copies available.

  • InDesign 6 not responding when adding new pages

    Hi folks,
    I'm having a continuing problem that sees InDesign 6 "not responding" every time I try to add a new page or duplicate a spread on a document I'm working on.
    This doesn't seem to be a problem on a new document - only on my working file, which is due at the printer tomorrow!!
    Can anyone offer any advice as to what the problem may be.
    Typically, I need an answer ASAP.
    many thanks
    Peter

    Try exporting to .idml and working with that. See Remove minor corruption by exporting

  • Application Not Responding Creative Suite

    Having major problems with Application Not Responding in Creative Suites 5 & 6. Whenever trying to quit applications, more than not have to force quit. Would like to be able to quit out of Adobe Apps without force quitting. Also get a lot of spinning wheel of death, that forces us to force quit and restart. Any help would be appreciated.

    What system? This behavior has nothing to do with the programs per se, "crashes on exit" always depend on systemic issues. provide the necessary details and crash info:
    Working with your Operating System’s Tools
    Mylenium

  • Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    I posted this on another thread. See if this works:
    1) Uncheck "Backup previous version" in Keynote's Preferences.
    2) Make a duplicate copy of your file that has issues and save it.
    3) If you still get spinning wheels from switching between apps after editing or 10 seconds of inactivity, manually save with command+s. It may beach ball here but be patient and wait for it to finish! Try editing and resume doing work now.
    Command+s may be a bit slow but I think that might be normal since the files are so big.
    Good luck and let me know if this works.

Maybe you are looking for

  • How to hide the select-options fields on radiobutton select in webdynpro

    hi Could you please help how to hide the select-option fields in webdynpro there are four radio buttons for every radiobutton there is corresponding the select_option filed is associated to it user as only provision select  one radio button and reset

  • Connecting external display to 2009 iMac 27" - resolution?

    I have a late-2009 27" iMac and am trying to connect to it a 27" external display (ASUS PB278Q). Both the iMac and the Asus have resolution of 2560x1440, but when I connect them, the best I can get on the ASUS is 1920x1080. I am connecting via the Ma

  • Can't drag new song into playlist

    I just purchased a song and attempted to drag it from the "Recently Purchased" column to my "Christmas" playlist. I get a warning that says only iCloud songs can be put in iCloud playlists and the song will only be available on the computer if I proc

  • Name() not supported XSLProcessor class?

    Hi, XSLProcessor doesn't seems to support the node set function name(). Is this true? Or is there something wrong with my code segment below? <xsl:template match="*"> <TD> <INPUT> <xsl:attribute name="NAME"> <xsl:value-of select="name()"/> </xsl:attr

  • Why does illustrator cc keep crashing?

    recently, everytime i open illustrator, about 2 minutes after its open, it 'unexpectedly crashes'. what is happening and how do I fix it? I have already tried updating the software- same problem