InDesign asterisk does not go away even after saving

I have a file in CS4 InDesign that I have made a number of changes to, and when I saved it, then opened it again, it had the asterisk next to the title, indicating that it needs to be saved, but all I did was OPEN it. I have a Mac using Snow Leopard (purchased in 2010) and I am currently using CS4 InDesign. Other than that, InDesign works fine. I have tried doing a SAVE AS, I have tried exporting the document as an IDML file, then opening in InDesign and saving, only to see the asterisk again. Sometimes, on other docs, exporting as an IDML works. I read it gets rid of the accumulated "junk" from multiple saves. Any ideas? Like I said, just 1 or 2 files. By the way, these files were done in CS4--not an earlier version of CS, as I know that would say CONVERTED next to the name, which this does not.

That is more for an InDesign program problem that effects the functionality of the program for most or all documents. This is only for a couple of well-used docs. I have my prefs set and I don't want to recreate them. Besides, that hasn't worked in the past. I'm attributing the asterisk issue with too much junk in the doc along with a lot of saving. It will be easier to recreate the file and start fresh. I have found that any other strange behavior (rare) is solved by simply exporting the file as an IDML or INX. Thanks for your suggestions.

Similar Messages

Firefox does not stop loading even after the site is loaded and continues as if it is still loading. I have clocked it to 15 minutes, why?

Firefox does not stop loading even after the site is loaded and continues as if it is still loading. I have clocked it to 15 minutes, why? edit
Details

Sorry, I should distinguish between slow loading and manual reloading.
I understood your problem to be that Firefox never finished loading the page, i.e., some part of the page was loading too slowly.
By reloading, I meant Ctrl+r (or the reload button), to manually reload the page. You can disregard any cached files and reload all content fresh from the server by adding the Shift key, i.e., Ctrl+Shift+r (helpful when specific sites do not load correctly).
If the page is automatically reloading itself over and over, that sounds like a completely different problem.

The message "iPad Not Backed Up" appears on the screen and will not go away, even after I push the "OK" button. What can I do?

The message "iPad Not Backed Up" appears on the screen and will not go away, even after I push the "OK" button. What can I do?

rodrocket wrote:
... What can I do?
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

TS2771 My daughters iPod touch does not turn on even after hooked up to charger for over 24 hours. Tried to hold the power button and home button at same time for 10 seconds and still did not turn on.

My daughters iPod touch does not turn on even after hooked up to charger for over 24 hours. Tried to hold the power button and home button at same time for 10 seconds and still did not turn on.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS3274 My ipad does not go off, even after pressing the off button for minutes and re set. What could I do next?

My Ipad does not go off again, even after pressing the off button and re set, what can I do to switch the I pad off.

Try a reset a few more times.
Hold the Sleep and Home button down until you see the Apple logo.
Data will not be affected.

TS3048 unable to connect to keyboard. System does not detect keyboard even after switching on and off. Mouse working fine. Earlier was working fine. Keyboard is not detectable by I mac . Tried a different keyboard same problem.

Changed batteries of keyboard -initially connected but now does not connect. Used a diffeerent keyboard -same result. Keyboard not seen in bluetooth devices.Switching on and off as well as re booting has not helped. Keyboard light continues to blink.

Hey Gautam5058,
Thanks for the question, and welcome to Apple Support Communities.
The following articles provide troubleshooting steps that may help to resolve your issue:
Apple Wireless Keyboard: Difficulty during pairing process
http://support.apple.com/kb/TS1569
Bluetooth Quick Assist
http://support.apple.com/kb/HT1153
You may also want to try resetting your computer's PRAM and NVRAM.
To resolve this issue:
1. Turn the Apple Wireless Keyboard off.
- For an aluminum Apple Wireless Keyboard, hold the keyboard's power button for more than 3 seconds.
- For a white Apple Wireless Keyboard, turn over the keyboard, and turn the power switch to the off position.
2. Click the "Continue" button as the Setup Assistant instructs.
3. Power the Apple Wireless Keyboard back on.
4. Enter the 8-digit passkey and press Return. Important: You MUST press Return after you enter the 8 digit code.
Thanks,
Matt M.

Help needed: Disk space does not free up even after deleting files.

Background information for this problem: I have my iPhoto library on an external HD, and was importing files from that same drive into iPhoto, and began receiving messages that I was very low on disk space on my internal HD. From here, it seemed like iPhoto was using my boot drive for some kind of cache. Regardless of the actual reason, I began moving files from my internal HD to fix this problem temporarily (while I was importing).
At this point, I started fiddling with my files and found that no matter how many files I would delete from my HD, the available space in the finder would not free up. *At this point, I have less than 20GB on my HD, yet it says I have 1.23 GB available out of 108 GB.*
Here is what I have already tried to fix the problem, to no avail:
a) Original user was using Filevault. I backed up all the files, created a new user without Filevault, and restored the files.
b) Booted from CD and used Disk Utility to erase free space.
c) Verified and fixed permissions
d) Deleted all app and system caches (via CacheOut X)
e) Fixed/Repaired all user/system preferences (via Preferential Treatment)
*Does anyone have any idea what's going on?*
-

Thanks for the suggestion.
I ran WhatSize and here is the result. Oddly, it says there is 40.2 GB used (in the top-left) which conflicts with the information directly below it: "Capacity 108 GB, Used 103GB, Available 4.27 GB". Not so helpful.
Disk Inventory X solved the problem, however. Much thanks! I wasted most of my weekend troubleshooting this sad issue. Anyway, Disk Inventory X revealed a bug where my external hard drive for photos was still appearing as a mounted volume, even though the HD was no longer connected. Freaky.
After moving it to the trash and deleting it, I've recovered the space.
Again, thanks! Contact me if you're curious about the details, as this might help you diagnose similar problems in the future.
- Mike

I updated to windows 8.1. Now acrobat writer does not work anymore even after repair. I am getting an activation error when trying to make a pdf. What should I do?

Can somebody help. A phone number to contact acrobat writer support? I paid for the program and it worked perfectly until I updated form windows 8 to windows 8.1.
I am getting the error"not allowed to use the software, I think license issue or something like that even though I paid for it".

Hi sergeguzy,
Which Acrobat version are you using?
By saying Acrobat writer, do you mean Adobe PDF printer in Acrobat or PDFMaker in Office products?
Also, you might try repairing Acrobat from the Help menu.
Hope to hear from you.
Regards,
Anubha

Firefox is already actif but does not respond. and even after changing the default properties the problem comes back (Read-only)

everytime I close Firefox, it select the option "Read-only".
I stop the proces via Task management and then I can start Firefox again. I close it and the "Red-only" option is back again.

Do you get this error only after closing and restarting Firefox or always?
In case of the latter:
Do you still have a default profile and is the profile as you see in the profiles.ini file marked as "Default=1" still present?
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Try to delete the profiles.ini file to force Firefox to create a new profiles.ini file and a new default profile.
*http://kb.mozillazine.org/profiles.ini_file
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use

Firefox 3.6. Internet connection vodafone mobile broadband. Pubmed website does not search. Even after making all previously described advice (javascript, cache, firewall, cookies). Pubmed works with ie. Pubmed in mozilla works with a wifi connection

I have a vodafone mobile internet connection (3G). In mozilla enviroment, i cannot search in Pubmed website (www.pubmed.com). I click the SEARCH button but nothing happens. I have made all the previously mentioned corrections (javascript, cookies, cache, firewall) but the problem still exists. When i get connected via a wifi internet connection, Pubmed in mozilla browser works properly.
It should be mentioned that Pubmed works fine either in mobile 3G connection or in a wifi internet connection. I would be grateful if someone could respond to my problem.

Your problem sounds similar to this one, except that they're using software raid rather than just pure LVM. If you're using an initrd, you may not have the appropriate modules installed. If you're not using an initrd, then the kernel probably needs LVM support compiled in (not as a module) and could be solved by fixing that. I have never used the ck-patchset, but this should give you an additional data point.
Also comment=systemd.automount will be deprecated soon as I understand it; if you have a need for automounting, x-systemd.automount should be used instead.

Share does not show up even after turning home sharing off and on again.

I cannot share movies between my computers. The Share item appears in list after resetting Home Sharing but disappears reight after.

Hello, lrc2.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend taking a look at. Try all of the steps in this article and if you are still experiencing the issue, see step 9.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Cheers,
Jason H.

Crashed, opens to spinny wheel which does not go away, even when restarted

This happened on my macbookPro... and as I am in the process of erasing everything and doing a clean re-install it started happening on my desktop. Anyone know what caused this? or how to fix it without erasing my computer?

millerphotography, did you ever get your problem resolved? I'm having the same problem. The app crashed and now I get a spinning wheel when trying to launch.
Thanks

HT1476 I have tried to charge the phone via computer and main socket it does not start up even after sometime and remains unable to start up any ideas ?

Unable to charge I phone 4s remains dead , can I get a new battery installed ?

Yes still nothing, it was showing 50% then crashed out for no reason. Now nothing

Sandclock does not go away after download of a file

hi !
i am able to download a file properly by getting the open/save dialog box.i am doing this by calling the jsp code from an html page. I have closed all the outputstream properly.but the sandclock does not go away even after downloading of the file.
Can anybody explain why?
Thanx in advance.
geeta

well can you post your jsp code, this may help in a better way to tell you whats going wrong,
onething you can try -> once the file is downloaded add a redirect stat and check ( this is only to test whats happening ) ;
Thanks

"Click Analyze to begin" won't go away, even after analyzed.

I'm working on a project right now in Premiere Pro CS6 and for some reason the "click analyze to begin" blue bar for warp stabilizer will not go away, even after it has been analyzed. I tried exporting it thinking that it would go away, but nope, it seems to be baked into the image. I need to get this project turned in to a client as soon as possible. Is there any way to fix this without have to replace/re-link some of the footage?
Thank you

I've come across this a few times. The way I work around it is to ensure that there are no layers of video above the clip you're stabilising. So if you have your interview (for example) that needs to be stabilised and you have some B-Roll above that video on V2, just cut the interview clip and trash the parts under the B-Roll, you don't need it there anyway.

InDesign asterisk does not go away even after saving

Similar Messages

Maybe you are looking for