Indesign Bleeds set correct but print wrong

I have a vendor supplied InDesign file built in facing pages with bleeds and marks set to bleed .125" on three sides and 0" bleed on the insides of the pages, however when I print the pages the inside edges also show .125" bleed. I have gone through the panels several times and cannot find why this is happening. We are a commercial printer and use this setup on many jobs and it always works the way we want. Don't know where the issue is and would like to resolve it for future happenings. Thanks

Okay I have attached the pdfs and screen grabs you requested

Similar Messages

  • When printing checks in Quicken 2010 using hp c6280 doesn't print correct, but prints ok HP PSC 2355

    When printing checks in Quicken 2010 using hp c6280 doesn't print correct, but prints ok on HP PSC 2355 all in one printer i am using Windows XP.  Checks print correctly when using Quickbooks on HP C6280 printer.

    Hi Omar,
    There are several things that can cause this issue. Check out the following link for steps you can take to resolve it:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lc...
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Table of Contents Issue - TOC Styles Set Correctly, but TOC Shows Two Fonts on One TOC Line

    I created a template and set up all of the styles correctly, as with every other template I've ever made.  However, I have never run into this problem before.
    I created the template to match a client's style/look.  They use a font called "Gill Sans MT."  My Normal style is set to this, and my TOC styles (TOC 1, TOC 2, TOC 3, etc.) are based off of the Normal style.  My Heading styles are
    also based off the Normal style and use the same font.
    For some reason, the TOC in the document is populating with two different styles.  The actual Heading text is showing up as Arial font, but the tab leader and the page number are showing up in the Gill Sans MT font (see below).
    Any idea what's going on here?  I have tried modifying the TOC styles, inserting a new TOC, basing the TOC styles off of "(no style)," changing the Heading styles, clearing the formatting on the Heading styles, etc.  I can't get anything
    to work.

    All I can suggest is to try your steps again. You mention everything that I would try.
    I assume that the template is a .dotx or .dotm file, and so, does not have an "attached template."
    When you tried basing your TOC styles off "no style" I assume you set the font to Gill Sans MT. I would definitely have the heading and TOC styles set to cascade.
    How styles in Microsoft Word cascade by Shauna Kelly
    Charles Kenyon Madison, WI

  • TS2972 I cannot open a rented film transferred from my computer to apple tv v1, i have ensured all setting ie ratings etc are correct but a message comes up saying that my apple tv is not authorised to watch this film

    Having difficulty viewing a film on my apple tv v1 transferred from computer, all settings on apple tv such as film ratings etc are set correctly but message appears refusing to allow the film to be watched on this device????

    Welcome to the Apple Community.
    Try restarting the Apple TV, router and computer or de/re-authorising your computer

  • Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

    Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

    Ok, look at your files in Photoshop. What is the profile assigned to them? You can find this out by going to the Status bar at the bottom, clicking on the right-pointing triangle and choosing document Profile from the list.
    Then in Windows, go to your Control Panel > Color Management and add sRGB (if it isn't there) and select it as your default profile.
    I hope that will work.

  • TS3367 How can I change my facetime phone number on my ipad? my apple id number is correct, but it is still showing up wrong in facetime.

    How can I change my facetime phone number on my ipad? my apple id number is correct, but it is still showing up wrong in facetime.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • When scaling in page setup, 1st page prints correctly, but subsequent pages do not scale correctly/too large for the paper, parts of the text missing

    When trying to print in Firefox, and when scaling the page size in page setup, the first page prints correctly, but subsequent pages do not scale correctly and are too large for the paper, with parts of the text are being cut off at the top and right. This is not fixed by checking or un-checking the "ignore scaling/shrink to fit page width" in the print window, or by changing the scaling%.
    I am running Firefox 15.0.1, on Mac OS 10.5.8.
    The same problem happens in the print preview and if I save the print as a .pdf
    I have tried all the fixes in the how to's and others in various forums with no improvement.
    This happens every time I try to print a document scaled up or down only in Firefox.

    The 2nd page print scaling error has been an issue with Firefox on the Mac since 2011. People at Mozilla have not considered this a major problem. Try printing anything at less than 100% and you'll quickly see how every page after the first page being scaled wrong gets old real fast. The lack of a solution to this issue forced me long ago into using Safari as my primary browser. Good luck waiting until version 21 for a solution. Current release is 18.0.2.

  • Setting options in "Printer" section using Applescript InDesign CS

    How can i set define supplementary options found in the "Printer" section of the InDesign dialog box in a print preset using Applescript?
    I would like my script to set duplex option with the proper binding, according to the page orientation.
    When creating print presets manually, these extra options are stored in the print preset, but I can't find how to access them thru Applescript.
    Thanks,
    Peter

    Shane,
    Thanks for your reply, but it is not yet clear to me.
    I know you can set some print properties in the Apple Print event, such as copies, collating, target printer ...but how can I adress the printer-specific options, such as duplex printing? Could you give me a sample line of code?
    And next step, how can I include this "Apple -print" setting in an InDesign Print preset using Applescript? I suppose I have to set the apple printer prefs before creating the InDesign preset. Right?
    Thanks in advance,
    Peter

  • Hi, Might I know that how to setup the printer setting at InDesign CS6 for the Lable print?

    Hi, Might I know that how to setup the printer setting at InDesign CS6 for the Lable print?

    Label printing isn't something you set up in the print dialog in ID. If your print driver has an n-up feature that might work, but in general you need to create pages of labels to fit your sheets in ID, then print. If you are talking about doing a merge of an address list, read about Data Merge in thehelp files.

  • I believe I have implemented it correctly but I am not receiving the notifications on my phone. I have an ad hoc provisioning profile set up.  I have the device token from the phone through NSLOG to console. I have the dot net code running without errors.

    I believe I have implemented it correctly but I am not receiving the notifications on my phone. I have an ad hoc provisioning profile set up.  I have the device token from the phone through NSLOG to console. I have the dot net code running without errors.The notifications just don’t appear.
    Any ideas where I am going wrong?

    IMAP account access by itself does not provide for syncing contacts, calendar events, and notes or anything over the air. This is possible with an Exchange account accessed via ActiveSync with the Exchange Server.
    If your company email account is an Exchange Account, your company's IT Dept. has enabled IMAP account access for your Exchange account on the Exchange server?
    If an Exchange account, the IT Dept. must have ActiveSync enabled for your account on the Exchange Server to create and access the account as an Exchange account which provides Push access for received messages, and over the air syncing for contacts and calendar events with the Exchange Server.

  • I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

    I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
    I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

    I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen.  The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
    Reset Preferences
    Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
    Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

  • I know my Apple ID and password is correct, but then I enter them to activate FaceTime it says one of them is wrong.  Can anyone help?

    I know my Apple ID and password is correct, but then I enter them to activate FaceTime it says one of them is wrong.  Can anyone help?

    iMessage and FaceTime are currently experiencing problems it's nothing that you are doing wrong. Just wait it out and check back for iCloud status. 
    http://www.apple.com/support/icloud/systemstatus/

  • Standard text displayed correctly in print preview but not in print

    Hi,
    I have a script in which a standard text has to be printed in the output.
    The standard text contains some german characters.
    These characters are displayed correctly in print preview but not in print.
    The text is maintained in 3 languages DE,EN and Russian.
    The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
    Please suggest something.
    Regards,
    Richa Aggarwal

    Hi Richa,
    Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
    It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters.  If a character does not display then that means it does not exist in the font that you are using.
    Regards,
    Ryan Crosby

  • LOGO is not printing correctly in Production but printing correctly in Qual

    Hi Friends,
    I am an ABAPER.
    In Scripts I had a logo. Problem is in development and quality systems it is printing correctly but it is not printing correctly in Production system. I have tested all the development, quality & Production systems with the same printer. Experts please guide me where exactly the problem is how to solve it. Good points will be rewarded for related solutions.
    Hi Nageswar,
    The exact problem is the logo is alphabetical characters only, but for example APPLE is the logo. The word Heading 1: APPLE. is in Coloured BOLD letters. In development and quality it is printing as it was original logo. But in Production the letters for APPLE is printing in such a way that A is printing as dotted letter A and so on for PPLE. But in quality and development is working fine Printing as BOLD letters.
    Finally want to mention that APPLE is a scanned logo. Its properties were same in three systems i.e, development, quality and production.
    Experts please help me.
    Edited by: pavan kumar on Feb 6, 2008 12:26 PM

    Not correctly in the sense. Please explain the error you are getting.
    Hi Pavan ,
    Check the printer settings it SPAD transaction and check printer settings were smae in both systems.
    Regards,
    Nageswar
    Edited by: Nageswar Vattikuti on Feb 6, 2008 5:01 PM

  • Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

    Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

    Moved to DPS forum.
    You need to set up the pages appropriately for the target device. For iPad that's 1024x768.

Maybe you are looking for