Indesign cc files not saving but not giving an error message

Indesign CC files not saving but not giving an error message
I have all my restaurant menus in Indesign cc and when emailing them to myself, after changing them to print them from a different computer I experience that the files are not the most updated version.
Can anybody suggest a solution?
Thanks
Janine

Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium

Similar Messages

  • For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

    For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

    mike frischenmeyer
    What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
    Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
    know the details and troubleshoot to determined what caused the problem.
    1. Can you open a new project?
    2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
    for that project?
    3. Please review the Adobe document on troubleshooting damaged projects.
    Troubleshoot damaged projects | Adobe Premiere Elements
    4. What are the steps that you are using to reopen this saved closed project.
    a. File Menu/Open Project/Name of Project
    b. Other
    Please review and consider and then we can decide what next based on your further details and results..
    Thank you.
    ATR

  • I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be

    I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be told the Support Advisor no longer exists!! A blind loop. I need to have Photoshop CS6 installed...what do I do from here??

    The CC Cleaner Tool assumes the Akamai Download Manager is activated and it has not. It seems to be the missing file that triggers the error message. \in a previous re-install I was prompted to download & install the Akamai Download Manger, but not this time. Is there somewhere on the Adobe website that I can download it??

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

  • I am trying to install itunes 10.5 but I get an error message that says click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi...I try to point iTunes to the .msi file but that is not working.

    i am trying to install itunes 10.5 but I get an error message that says "click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi..." I try to point iTunes to the .msi file on my c drive but then it gives me  a message says "the file location is not a valid installation packaage for the product iTuness.  Try to find the installation package 'itunes.msi' in a folder from which you can install iTunes".  Any help, insight, guidance would be greatly appreciated!!

    "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

    Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

    More information about this issue can be found here:
    https://forums.adobe.com/thread/1672655
    A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
    Then download each of the individual updates and run them sequentially. 
    I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
    You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
    Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
    Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
    Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
    Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
    Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
    Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
    Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
    Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
    Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

  • Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

    Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
    I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
    I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

    Which files do you have in the defaults\pref folder in the Firefox program folder?
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    See also "Other solutions":
    *http://kb.mozillazine.org/Preferences_not_saved
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

    Greetings All,
    I am having issues with a SharePoint Designer workflow.  This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow.  I'm developing this as a SharePoint 2010 workflow because I need to do
    impersonation.
    The environment and workflow have been running, in the past week, without issue.  I went to add a couple steps and now I cannot publish the workflow.  While in SharePoint Designer, I receive the error:
    "Errors were found when compiling the workflow.  The workflow files were saved but cannot be run."  When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow." 
    That is all the error information I have available; nothing is in the log files.
    I have investigated this error and tried the following:
    Cleared the SharePoint Designer cache.
    The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000.  Restarted the servers (which may not have been necessary) and tried again receiving the same error.  I then increased it to 30000 with the same error result.
    Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
    I reboot the servers and try again and now I can publish the small test workflow but not the original.  However, neither will run.  When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
    An unexpected error occurs.  I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
    Also, now no workflows can be published in this web app.  Not just the one I was working on but none of them!
    Does anyone have a clue what has happened to the SharePoint 2010 workflow service?  Or some suggestions for me to try?
    Thank you in advance for your help!
    Bob Mixon

    try these links:
    http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
    http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
    http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
    http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
    Hi Sagar,
    I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
    Your first link is specific to SharePoint 2013 workflows.
    Your second link refers to the UserDefinedWorkflowMaximumComplexity.  If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
    Your third link also refers to large workflows with many approval activities.  My workflow doesn't contain any approval activities.
    And you fourth link refers to 2013 workflows not 2010.
    My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
    Thank you...

  • Why does iTunes not give an error message for wrong type of movie file

    I just spent an hour trying to get iTunes to import a movie type which it doesn't understand. Why on earth does it just fail silently instead of giving an error message about incompatible file type ? It was my own stupid fault, but I am so used to getting quirky errors in iTunes that I overlooked the obvious and started going up blind alleys. Is there some preference somewhere that can change this way of working.

    Have you tried downloading the apps on your computer and syncing?
    The message means what it says. Yu do not see the "artwork" for the app.

  • I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

    I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
    Help!
    Thanks, Mark

    Unfortunately, the error message gives no details about what codec might be missing or what it needs.
    If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
    It's a stupid error message. Apple should do better than that.
    Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
    I'll call Apple support when I get a chance.
    Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

  • I am trying to upload a pdf i created to an online system but am getting an error message indicating that my document is not formatted to 8.5x11. How can i get my document to 8.5x11

    I am trying to upload a pdf i created to an online system but am getting an error message indicating that my document is not formatted to 8.5x11. How can i get my document to 8.5x11

    You'll want to fix this via the online system you used to create the PDF.
    If all content mastering and page configuration is done online then that is where you must make a correction to what you did before.
    If a file is uploaded to the online system for processing then you must revisit that file.
    Open the file with its native application and correct page size there.
    If you upload a scanned image to the online system you must configure the scanner software to output the needed page size.
    Be well...

  • Anybody with isues running office:mac 2011,  I am using Mac OS 10.6.8  It ran for years then recenty started giving me error message that it might not be compatible. I tried reinstaling with no luck.11?

    Anybody with isues running office:mac 2011,  I am using Mac OS 10.6.8  It ran for 2 years then recenty started giving me error message that it might not be compatible. I tried reinstaling with no luck.11?

    I think my problem has been that in Sytem Preferences>Mouse, my "Double-Click Speed" was set to the SLOWEST setting. After some experimentation, I now have the that setting two notches from the "Fast" end of the scale. In case it's important, the "Primary mouse button" in my Preferences is set to "Left".
    This not only solves the text selection issues described, but also seems to eliminate the strange "resolving alias to" problem.
    [For the curious, I have a Logitech Performance MX wireless mouse which can be configured with "Logitech Control Center". But the LCC software doesn't control double-click speed; this setting can only be made in the Mouse System Preference pane.]

  • Trying to update iTunes but keep getting the error messag "the url could not be opened" when it's always worked fine in the past. What does this mean?

    Trying to update my iTunes but keep getting the error message "the URL could not be opened" what does this mean and how do I resolve this? It's always worked fine in the past!

    Select a broken track and press ctrl-i to Get Info. Look on the summary tab for the location where iTunes "thinks" the file should be. Where is it really? Post back the two locations and I can suggest the best approach.
    tt2

  • I am using Windows XP. I have loaded Firefox, but it will not launch. I had success loading and launching on my other computer that is running Vista. I need help please? I do not get an error message.

    I am running windows XP and have successefully loaded Forefox. My Firefox will not launch and I do not get an error message. When I click on the firefox icon I see an hourglass for two to three seconds and it still does not launch. Please help!
    == Each time I try to launch Firefox. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Do you have NoScript or Flashblock or some similar Extension installed? If so, are you allowing the site, at least on a temporary basis, access by such an Extension?
    Your Shockwave for Director is out of date. You can check here: http://www.mozilla.com/en-US/plugincheck/
    To update it, use the link on the page below under "Installing Shockwave", download and save to your hard drive, close Firefox, click the file you downloaded, after the install, open Firefox and check on the above link again.
    https://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox

  • Trying to update my ipod but i get the error message network timed out.  I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

    trying to update my ipod but i get the error message network timed out.  I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

    Try the manual method specified here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

Maybe you are looking for