InDesign CC installation freezes at 43% every time

I have been trying to install InDesign CC for hours. Every time it gets to 43% and freezes. I have tried several times with the same results. Please help.

This is an typical installation error. 
You may need to uninstall and reinstall Illsutrator CC after performing below steps. If you are okay . try with the below step.
Navigate to C:> Program Files(X86) > Common Files > Adobe.
Open Adobe folder and locate folder named Caps.
Rename Caps folder to Caps-old.
Then try to install InDesign cc application.

Similar Messages

  • Installer update method changes every time i update an adobe product!

    hello, it is REALY anoying, that the user have to set/chose the update method e.g. "Notify me to install updates" EVERY TIME you update adobe products!!! Because Adobe Installer resets these settings every time, they offer a new product update (adobe flash or adobe reader e.g.).
    I dont wont to "Allow Adobe to install updates"!!! I only want to be notified about new updates! So I have to read every time the options again to choose the right option.
    Another alternative would be to me, not to install product updates, but I think this is not what adobe wants the user should chose.
    Best Regards,
    Tom

    What version of iWeb are you suing and what version of OS X?
    You can try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

  • ITunes freezes Windows 7 every time I try to play a song!

    My iTunes worked fine yesterday. I left my house for 5 minutes and now the Volume Mixer will not open and every time I try to play a song in iTunes it locks up. I get an error message when my Playback Devices window opens (which is blank...there are NO playback devices) saying "Windows Shell Common Dll is not responding." Every hour there is a new problem with Mac and Microsoft interfacing. I can't stand it and just want my media player back. I have no music now! My phone won't sync. Nothing.

    I'd give it a go doing a repair install of Windows 7 from the installation disc.

  • Installation fails at 12% every time

    I have had Windows 8 on my laptop for the longest time, and after trying to install Windows 10 it fails every time at 12% with a "Windows cannot install the file" error. I have done these things in attempt to fix it, I've updated my BIOS, wrote
    zeros to my hard drive in attempt to clear the MBR. I am running an Inspiron 1564 (yes, the old one from 2010), but it should run 10 fine if it runs 8.1.

    I don't have this machine but here are a few things you could look at; that is if you haven't already.
    Things you could try:
    Changing up the Bios Settings.
    if it came with win 8. it is probably runs a uefi firmware. These often have a bios backwards compatibility mode. You could try checking those options and turn off secure boot and turn on the bios backwards compatibility mode and see if win 10 will install.
    if it came with win 7, it may have a bios with those features not turned on; if that's the case try turning them on.
    Note: you may lose/gain security features or boot speed by disabling or changing some of these features. But it may tell you if a uefi firmware or bios settings incompatibility that could be causing your installation issue. You could also try a different
    HDD.
    Also you didn't mention whether you were trying to install from a usb stick or if you burned the iso to a DVD. If you are trying from a USB and have a DVD drive. Try burning as a DVD. I had dell lattitude that would never install from my usb; it would start
    installing but then it would stall, but from a dvd in the dvd drive it installed alright... kind of weird (I was installing win 7 not 10, so not sure whether it would make a difference on win 10.)
    Win 10 may also run but the install is borking on your machine... this is unconventional and surely not recommended, but you could put that laptop hard drive in another machine and run the install. Then on the last reboot swap the hard drive back into your
    laptop and see if it boots up.
    This may allow you to try running the os and see how it works on that laptop, if that's your goal.

  • How can I stop my screen saver preferences pane from freezing up? every time i try to access it I get the spinning beach ball. Running 10.8.4

    Every time I open the desktop/screensaver pane in system preferences it freezes. Does anyone know how I can fix this?

    That's caused by a bug in automatic login, which corrupts the Desktop settings file, so delete it.
    Open a Finder window, select Go menu (on the menu bar) > Go to Folder, and type ~/Library/Preferences. Then, delete "com.apple.desktop.plist" and "com.apple.systempreferences.plist", and restart. OS X will create a new Desktop file in the next startup

  • Firefox freezes ('hangs') virtually EVERY time I open a second browser window. How can this be fixed?

    I recently (about a month ago) downloaded the newest version of Firefox and ever since, the browser freezes virtually EVERY time I open a new Mozilla browser window. I did not ever have this problem in the past.

    Are you using the Default Theme? ''If not, switch to the Default Theme.''
    If it isn't a problem with a 3rd party Theme, try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most other Add-ons.''
    # You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • IPhone 4 freezes while restoring every time

    I tried to get the new software update for my iphone 4 and my pc froze while installing it, which forced me to restore the phone. however, every time i try to restore it, it gets about 1/3 of the way through and the little progress bar always freezes. any tips? i've tried restarting the computer and disabling the firewall to no avail.

    What equipment?
    If you by use the equipment mean the phone itself then its likely a hardware defect which require repair

  • Since updating to Lion Indesign Cs3 is not printing, crashes every time I push print

    Since updating to Lion Indesign Cs3 which is supposed to be compatible crashes every time I push print.

    What about other programs? Have you updated the printer driver?

  • ITunes freezes on startup every time - reboot always needed.

    Hi all,
    I'm on Snow Leopard, fully up-to-date, and the version of iTunes I have crashes on startup every single time, and the only way I can recover my system is to reboot my MacBook.
    The process is:
    1. Start iTunes from dock.
    2. iTunes opens
    3. "Analyzing Song Volume" appears in the top-center iTunes dialog box.
    4. iTunes freezes
    5. Reboot.
    I've tried deleting the track it's analyzing and it made no difference - it seems to think the track still exists as the same track name pops up in the dialog box every time before it freezes.
    iTunes is thus completely unusable on my system, which means my iPhone's gone far too long without a backup, any help would be hugely appreciated, thanks!

    try this:
    quit iTunes. move the following file to the desktop: <MacintoshHD>/users/<yourname>/library/preferences/com.apple.iTunes.plist
    fire up iTunes (which will create a new .plist file). if it works now you can trash the plist file you moved to the desktop.
    JGG

  • ITunes freezes and crashes every time I try to open it

    MacBook using OS X 10.9.2 - Every time (without exception) I try to open iTunes, it goes to the "Accessing iTunes Store" window, and then stays there while launching that much dreaded Mac "spinning wheel of death"....
    I have to force quit in order to get rid of it since I do not have access to any of the iTunes menu items while this is all going on.
    Have no idea what to do...

    Hi exyalie,
    Welcome to the Support Communities! 
    What version of iTunes are you using?  You may need to update your software or reinstall it (this affects the application, not your data).  I would also suggest quitting the application, restarting the computer and resetting the SMC (see below).
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Disconnect from the internet (turn off Wi-Fi) and unplug ethernet -- and then try launching iTunes again.
    There are more troubleshooting steps in these articles:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/TS3430
    Add-ons, such as plug-ins and scripts, not manufactured by Apple (third-party) add features to iTunes or modify its appearance and behavior. Using these can interfere with how you use iTunes. For example, if you upgrade to a newer version of iTunes, your add-ons may not be compatible.
    Slow performance
    iTunes won't open or quits unexpectedly
    If you see the above symptoms or other unusual behavior, you can disable any third-party plug-ins by opening iTunes in Safe Mode:  OS X: Hold down Option-Command.
    Click Continue and see if any issues persist.
    I hope this information helps ....
    - Judy

  • Acrobat 9 installation/config procedure repeats every time

    I have just transfered Acrobat 9 to a new laptop running Windows 7 Professional from previous laptop running XP. Every time I click on the program from the Start Menu it goes through a full install and config procedure before opening. How can I prevent this happening?

    Well there is an issue with Acrobat 9 on Windows 7. Not sure if it is the s ame issue you have.
    Support policy | Acrobat 9 | Windows x64

  • How can I stop laptop freeze/spinning wheel every time I click or type etc?

    I sporadically get momentary freeze and or spinning wheel when I try to do anything on the laptop. Sometimes it works fine but the majority of the time it stops on every click. The problem has been persistant for a week or two, possibly related to a mavericks update.
    The dock sometimes doesn't work either - it is unresponsive, an appl will bounce but not open.
    This occurs enough to be very frustrating and gets in the way of my work.
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro9,2
      Processor Name:          Intel Core i7
      Processor Speed:          2.9 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          4 MB
      Memory:          8 GB
      Boot ROM Version:          MBP91.00D3.B08
      SMC Version (system):          2.2f44
      Serial Number (system):          C0******TY4
      Hardware UUID:          ******************
      Sudden Motion Sensor:
      State:          Enabled
    I backed up all my files, emptied the hard drive and uninstalled/reinstalled Mavericks.
    This created another problem - the laptop would not boot up and I got a flashing question mark in a folder on the screen. Eventually I was able to reinstall Lion which then fixed that problem. For a short while there were no problems of latency either (maybe 20 minutes).
    I have done disc scans/repairs and there were no problems there. I did an extensive hardware scan as well and no problems were detected.
    I don't know much about Apple computers - I've only had this for just under two years and I have had no problems so I'm quite illiterate regarding how to repair it or scan for problems. Any pointers in the right direction would be appreciated.
    <Edited by Host>
    Incidentally I have had no freezes since starting to write this post - Lion seems to be more stable than Mavericks was.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Cannot update to Vs. 3.6.15 freezes my PC every time, Windows says there is compatibility problem.

    Firefox keeps telling me my vs. 3.5.17 is out of date and to update to 3.6.15, each time I attempt this it ends up freezing up my computer running Windows Vista. Checking for solutions, Windows says it is a compatibility issue. I have never had a problem updating FF previously.

    Same issue here, my firefox is all messed up. I went to update it and now I cant even load yahoo mail, google, ect.... it just crashes everytime.
    Now it wants me to install this plugin-container from mozilla. I don't wanna unless I know for sure it wont make things worse.

  • I keep trying to download the lastes update for InDesign CC 2014 and it fails every time. What should I do?

    I have no issues with any of the other programs that I use -- they all update just fine. InDesign CC 2014 is only one that fails continuously. How can I over come this issue?

    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Purchased Captivate 8 for my MAC. I get installer failed to initialise every time I try to install.

    I have successfully downloaded Captivate 8 several times. Each time I try to install on my Mac, I get the message that the Installer Fails to Initate. I tried the trial as well. Please help me. I am using the subscription service if that makes a difference. I have a Mac with 16 gig ram and 3.4 I7 processor.

    Hello,
    Welcome to Adobe Forums.
    Which version of MAC are you using ?
    Do you have any other Adobe product installed on your computer ?
    What is the size of downloaded file ? (Captivate 8 trial installer)
    Thanks,
    Vikram Gaur
    Adobe Support

Maybe you are looking for

  • I have an error message when trying to use components

    it seems that I have installed wrong or corrupted component files, because every time i open Flash and try to use any component, there come error messages like "Unexpected file format"  and Flash closes inmediatly after that... I reinstalled Fash , b

  • CS5 Crashing consistently

    Hey all ... i have a file i'm trying to work on. I open the document, select the text with the text tool. Deselect it, then change ot the arrow tool and it crashes immediately. Error is repeated every time. Here is the crash log. Any ideas? Process: 

  • LOAD_PROGRAM_NOT_FOUND raise in CL_SHM_AREA- _ATTACH_READ

    I recently re-organized my code and deleted a now unused function group called SAPLZENTITLEMENT_SERVICE. All the functionality is now performed by a new function group. Since then I get dumps when trying to attach to the shared memory area, which was

  • Numberfield displaying exponetial format when the num 99999999999999948

    Hi,      As mentioned in the sub,i am  facing the problem with the number field format.If the number is greater than 99999999999999948 (ie 99999999999999948 + 1) then the fiels is display in exponential format(1.2e+005). I want to display the number

  • Albums can be downloaded earlier if you don't preorder them?

    I preordered Sheryl Crow's Wild Flower a week ago. If I go under my account, it says that it will be released on September 27th, and I can't buy them yet. It's 10pm PST on Sept 26th, and a friend of mine was able to preview all the tracks and even ad