Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe

Similar Messages

HT4623 update process fails with the following message "Unable to Verify Update. iOS 6.1 failed verification because you are no longer connected Internet."

my iphone 5 is connected to a wi-fi network and i'm able to browse the web and receive emails. however when i try to update the software the process fails with the following message "Unable to Verify Update. iOS 6.1 failed verification because you are no longer connected Internet." It gives an open to "Close" or "Try again", but the retry is also unsuccessful.

Try to connect to secure web site. If you can't, that would mean that your iphone is unable to authenticate itself to apple servers in order to download update. If you can - I would still guess same but with less certainty and suggest to update on another network.

Post-processing ends with the error message

Hi
when i try to run a report, i am getting the below error.
Beginning post-processing of request 5947956 on node RWS60160REMS at 15-MAR-2012 04:13:48.
Post-processing of request 5947956 failed at 15-MAR-2012 04:13:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
i check the OPP and the error stack is:
[3/15/12 4:13:51 AM] [2103265:RT5947956] Output file was found but is zero sized - Deleted
[3/15/12 4:13:51 AM] [UNEXPECTED] [2103265:RT5947956] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:677)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:425)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:244)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:6032)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
The error is : Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
I checked my XSL template and corrected that line.
even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
I updated the template many times but it keeps picking a wrong template.
Need help on this issue.
Thanks

Please post the details of the application release, database version and OS.
I checked my XSL template and corrected that line.
even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
I updated the template many times but it keeps picking a wrong template.Please create a new template and check then. Also, bounce the OPP.
Thanks,
Hussein

DISPLAY/PRINT MY EXPENSE REPORTS UNDER TERA FAILS WITH THE ERROR MESSAGE

Hi Techies,
When i click on "Display/print" button under my expense report ( Employee --> Travel & expenses --> Manage Expenses (TERA) --> My trip reports), it opens up a new window with the error message "SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send failed with exception communication_failure(100,101)."
This behaviour is noticed in the new upgraded system NW 701 SP7 (portal) and backend ECC 6.0 EHP4; However it works perfectly fine with our non-upgraded system NW 70 SP10 (portal) and backend ECC 6.0.
When i ran the trace on this functionality, i could notice that in the non-upgraded system, after pulling all the values, it calls the RFC function module "PTRM_WEB_FORM_HTML_GET"; however the upgraded system calls "PTRM_WEB_FORM_PDF_GET".
For the "PTRM_WEB_FORM_PDF_GET", I believe we need to configure the "ADS" rfc pointing to the ADS service on a j2ee server which am not planning for.
MY QUESTION IS:-
IS THERE ANY OPTION TO CHANGE THE FORM BEING CALLED FROM "PTRM_WEB_FORM_PDF_GET" TO "PTRM_WEB_FORM_HTML_GET" WHICH I BELIEVE WILL RESOLVE THE PROBLEM AM FACING?
Kindly assist with your thoughts!1
-GK

Read the steps on note 1032311 on how to achieve it,
In Web Dynpro, the Parameter for Formula is Defaulted to PDF file. If
you don't want to use the ADOBE Form in ESS, you have to follow 2 steps:
Solution
    o Check the Homepage framework configuration.
In IMG (transaction SIMGH) go in Travel Management->Employee Self
Service->Homepages Framework->Ressources
Delete the URL parameter "sap.xss.tra.UsePdf=true" of the ressource
"EMPLOYEE_TRAVEL_TRIPFORM_SRV05".
Check that the field URL for PCD file is filled with
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_fol
der/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_trave
l_expenses/com.sap.pct.erp.ess.tripform
Normally if it is not filled in your client, the system should use the
one from client 000, that is the SAP delivered customizing.
    o Check the Portal PCD configuration
Logon on to your SAP portal as Administrator.
In the Content Administration - Portal content, select Content
provided by SAP->end User Content->Employee Self Service->iViews->Travel
and Expenses->Display Trip Form
Right Click on Display Trip Form and Select Object->Open
In the field Application Parameters, you will find a parameter
                                                                 Page 2
sap.xss.tra.UsePdf=true . Delete this line completely.
When this configuration is done, the PDF form is desactivated and the
HTML form is used.
This is the issue with ADOBE set up
Firstly, I would ask you to check the customizing steps from 944221
to ensure no issue with the ADS configuration for the pdf form.
to review OSS note 925741 as there can be a issue with the
platform validity and version.

Solaris 10 Update 1 PXE Installation on SPARC fails with the error message.

Hi,
The remote installation is continiously failing for older updates, I tried with different images but all fails with the same error message ' Using DHCP for network configuration information.
^CMar 17 13:07:00 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 130.
[ system/install-discovery:default failed (see 'svcs -x' for details) ]
Requesting System Maintenance Mode" , the log of the same given below:-
{1} ok boot net:dhcp -v install
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V240, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
Rebooting with command: boot net:dhcp -v install
Boot device: /pci@1f,700000/network@2:dhcp File and args: -v install
1000 Mbps FDX Link up
Timed out waiting for BOOTP/DHCP reply
1000 Mbps FDX Link up
Using BOOTP/DHCP...
Using DHCP for network configuration information.
/sbin/install-discovery: /etc/inet/hosts: cannot create
Mar 17 13:05:58 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 1.
ln: cannot create /tmp/devices/devices: Operation not applicable
mount: /tmp/dev: Device busy
Configuring devices.
devfsadmd: daemon pid 28 is already running
mount: fd is already mounted or /dev/fd is busy
Using DHCP for network configuration information.
<unknown>: warning: dhcpagent: daemonize: timed out awaiting adoption.
/sbin/install-discovery: /etc/inet/hosts: cannot create
Mar 17 13:06:40 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 1.
ln: cannot create /tmp/devices/devices: Operation not applicable
mount: /tmp/dev: Device busy
Configuring devices.
devfsadmd: daemon pid 28 is already running
mount: fd is already mounted or /dev/fd is busy
Using DHCP for network configuration information.
^CMar 17 13:07:00 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 130.
[ system/install-discovery:default failed (see 'svcs -x' for details) ]
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
# svcs -xv
svc:/system/install-discovery:default (install-discovery)
State: maintenance since Sun Mar 17 13:07:00 2013
Reason: Start method failed repeatedly, last exited with status 130.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/system-install-discovery:default.log
Immediate response in this case is appreciated.
Thanks
AS

Moderator Comment:
Immediate response in this case is appreciated.No.
This is not company technical support.
If you want speedy assistance, use your contract credentials and log a support case.
No one here is paid to respond.
No one here is a company representative, nor are they responding as representatives of the company. There is no obligation that any inquiry get assistance, and your presumptive statement is bordering on being rude.

Photo upload to iCloud fails with the error message 'Upload failed due to network error'. Ideas?

I am trying to get my photos on my Mac Mini onto my iPad 2 via iCloud. I have tracked the problem down to upload failure from Mini to iCloud. 1St (&every) photo upload fails with the message 'Upload failed due to network error'. Any ideas?

I doubt this issue is related to the Mac Mini specifically.
I have 44 photos shot with an iPhone 3G that will not upload to iCloud Photo Library. I try and drag-and-drop them onto the web interface and I get the same error message you did:
Upload Failed
44 items were not uploaded due to a network error.
However, I have another 62 photos shot with the same iPhone 3G that upload without issue. And I just uploaded 440 photos from an iPhone 4 without issue.
I thought it may have something to do with certain EXIF tags missing on the photos that would not upload but I have not been able to figure out a pattern when comparing photos that work and photos that don't work.
The photos that won't upload open fine in QuickLook, Preview, and Pixelmator so I doubt the image is corrupted in some way.
I can AirDrop the photo to my iOS device and it will upload to iCloud Photo Library, the photo/video count will be incremented on the iOS device and iCloud Photo Library but the photo will never be displayed in iCloud Photo Library. When I delete the photo on the iOS device the photo/video count will decrement on the iOS device but will remain the same in iCloud Photo Library. When this occurred the following error was thrown in the iCloud Photo Library web interface:
Expanding Details shows the following log:
https://gist.github.com/jameswthorne/757e319b9fee63119890

Planning Data Pull process failed with timeout error

Hi Experts,
Version: Oracle apps 11.5.10.2
Issue: Planning Data Pull process failed with timeout error
message in the log file as follows,
The Request id : 90018907 has Phase : COMPLETE and Status: ERROR
Concurrent Message : Timeout error.
There is an Unknown error in the Worker.
Planning Data Pull process failed.
+-------------------------------------
Please advice what could be the problem. I submitted, standard data collection programs with 900 mins and 8 workers.
Refresh Collection Snapshot completed without any issue

Please see these docs.
Data Collection Fails Because Of Time Out Timeout error [ID 339968.1]
OPM-ASCP: Data Collection Timeout Error [ID 601539.1]
STD COLLECTION FAILING AT PLANNING DATA PULL WITH TIMEOUT ERROR [ID 978472.1]
Data Collections is Failing - All Errors - First Diagnostic Steps [ID 207644.1]
Troubleshooting Errors with ATP/Planning Data Collections [ID 1227255.1]
MSCPDC PLANNING ODS LOAD ERRORS WITH TIMEOUT ERROR - POOR PERFORMANCE [ID 417633.1]
Thanks,
Hussein

Help!! "Volume erase failed with the error"

I have no idea what to do ! My computer was running a bit slow and I wanted to get rid of any unwanted apps and files, so I backed up the files that I did want on an external drive. I then erased everything on my HD. Then I restarted it and attempted to reinstall the old apps from the cd that came with my computer but I couldn't. It takes me to the Utility Dock every time I restart it and when I try to install Lion back on, I can't click on the HD and it says it's 'locked'. When I try to reset it again or do anything at all it gives me a "Volume erase failed with the error" message. I can't do anything! Can anyone help???

Replace the hard drive.
If it can't be erased, that usually means something is seriously wrong with it.

Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

Hi,
Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
I followed the install prcedure, clicking next a few times etc...
I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
I checked the process an hour in and message on screen read:
Secure disk erase failed with the error:
could not open disk
The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
The only thing that appears in disk utility is the OSX install DVD.
I can't even shut down the mac as everything under the apple tab is greyed out!
I'm guessing this means my hard drive is broken right?
If anyone has any other ideas of what to try I'd really appreciate that.
How do I turn the machine off?
If my hard drive is gone then should I consider getting an SSD drive?
Any recommendations for such a drive would be great.
Hope you can help!

Did you partition the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Partition failed with the error: The target Core Storage volume is locked

partition failed with the error: The target Core Storage volume is locked
Hello everybody!
Please help me.
I'm using MacBook Pro (Retina, 13-inch, Mid 2014), Processer:2.6 GHz Intel Core i5, Memory: 8 GB 1600 MHz DDR3.
my computer i have divided in 3 drives: 1-Machintosh HD (Mac OS) 2-Bootcamp (Window OS) & 3-Data (drive for data storage).
I don't want to use Window OS on my computer anymore so I decided to delete drive Data (the third drive) & Window OS (the second drive).
I want my hard drive become a single drive back but when I was formatting, there were some problem display:
then i clicked ok and it displayed like this:
then i try to format or create new partition, it's nothing happen when press button apply.
my computer has storage space 256GB but now when it is happened like this my storage space is only 127GB only.
so please help me.. what so I do with this problem.
Thank you.!

arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

Partition Failed Partition failed with the error: POSIX reports: The operation couldn't be completed. CAN NOT ALLOCATE MEMORY

I plug usb mass storage device to my macbook pro i7 than every thing is stack and i reinforce to shutdown and than I start again but mac fail to boot again.
I tried different optiones in disk utility in mac os startup disk. but still fail to repair, erase and partition. I try to fix with the steps listed in
https://discussions.apple.com/message/13288923#13288923
but it fail to partition with the msg:
Partition Failed
Partition failed with the error: POSIX reports: The operation couldn’t be completed.cannot allocate memory
pls pls pls help urgentely on this matter I stop working.
Kind Regards,
pe

Hi again OGELTHORPE.
I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
Thanks again for your suggestions!
L.

Partition failed with the error: No space left on device

I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!

arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore

The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the error 0x80042316

When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
error 0x80042316"
The odd thing is that when I start the backup manually, it works fine. When it runs automatically the error appears.
When doing a SFC /scannow I do get errors that can't be corrected.
Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?

Hi,
0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
Meanwhile please provide the result of:
vssadmin list providers
vssadmin list writers
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hi,
I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
Also:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
AND:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
State: [1] Stable
Last error: No error
Writer name: 'DFS Replication service writer'
Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
State: [1] Stable
Last error: No error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
State: [1] Stable
Last error: No error
Writer name: 'IIS Config Writer'
Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
State: [1] Stable
Last error: No error
Writer name: 'NPS VSS Writer'
Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
State: [1] Stable
Last error: No error

Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

Similar Messages

Maybe you are looking for