Indesign code 5 error

I am having trouble opening indesign cs6 it keeps saying code error 5 configuration error and I have tried everything I've read about, using the Adobe CC cleaner, uninstalling and reinstalling, updating the software, everything. I bought my software from Indiana University through IUware. Help would be much appreciated!I dont know what to do.

See if this helps:
http://forums.adobe.com/message/3008803

Similar Messages

InDesign CS5: Configuration Error (Error 5)

I've installed CS5 Premium. When I try to start InDesign CS5, I get this error: "Configuration error. Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of the screen. Error: 5. http://www.adobe.com/support/". It looks like this:
I've uninstalled and reinstalled. It did not help; I got this same error again. I went to the Adobe support page and found nothing useful. I see it says "contact Adobe technical support," but I am trying my best to sort this out on my own before getting in the support queue.
Has anyone else had this trouble?
Perhaps related, perhaps not, when I try to start Photoshop CS5, it brings me to the 30-day trial activation screen. This, despite the fact that I entered my serial number for the suite when installing it. If I put the serial number into the activation screen, it rejects it as invalid for the product (from what I read, it should be accepted ... a document here on Adobe's website said any application in the suite should accept the suite serial number). I know the serial number is good, because it works on my other machine (it installed fine and works on my desktop, and this is the laptop I am trying to get to work). InDesign, Photoshop, and Bridge are the only products in the suite installed on this machine. Bridge works fine.
Any help would be most appreciated!

Hi Swapnil,
What do you mean by system configuration and how to run CS3 Clean Script on level 4?
Thanks!
Date: Tue, 27 Jul 2010 12:21:33 -0600
From: [email protected]
To: [email protected]
Subject: InDesign CS5: Configuration Error (Error 5)
Hi,
Can you please provide information about system configuration.
If you don't have any other version of Adobe on your system then you can run CS3 Clean Script on level 4 on your machine. This will actually remove all Adobe componentes from your machine and then try the installation..
Cheers,
Swapnil
>

Trying to install inDesign. Receiving error message: Unable to extract Temp Directory (EX11)

Trying to install inDesign. Receiving error message: Unable to extract Temp Directory (EX11)

Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-0

Hi all,
I have found a error "Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-01'" while adding the DELIVERY document.
I have made a customer and assign then "EURO" currency and add delivery document then it prompts error.
Could anyone solve this problem. is there any setting which i am missing..??
Regards
Sandesh

HI Sandesh,
Check Sap note :1252328
and also check below thread of similar issue:
Re: 'Invalid Currency' error when attempting to deliver order
Hope this will solve your issue.
Thanks,
Neetu

Error code -22: Error while registering

Hi Guys.
I'm new to NW Mobile 7.1.
I'm able to run developed applications and see data on physical devices (PDAs).
I'm also able to deploy and run the same applications on the NWDS Client (Simulator) BUT SEE NO data, because It can't sync.
My question is very simple: How can I set up NWDS Mobile Client (Simulator) so I can get data?
When I get to the Device Information screen (NWDS Mobile Client Simulator),values for Device Name and Device Id are blank
After a sync, the folowing messages appear on my console:
Windows XP
messageReceived in ContainerSyncEventListener: Connected to the server   Level: 1
messageReceived in ContainerSyncEventListener: Sending logon data to server   Level: 1
messageReceived in ContainerSyncEventListener: Waiting for response from server   Level: 1
messageReceived in ContainerSyncEventListener: Receiving data from server   Level: 1
messageReceived in ContainerSyncEventListener: Error code -22: Error while registering
I know that it is a must to setup a Device Name with one that exists in DOE (then Device Id is assigned during registration with DOE). But how can I place a value on Device Name? Should I set it up? then, Is it by copying a .propierties file under a MI/Folder or something?
I can't navigate my applications on the simulator so I need to deploy the files to a physical device every time I build, and this obviously takes more time than just running it on the simulator.
In just a few words, it is driving me nuts.
Thank you in advance,
David.

Hi,
if you have used MI7.0 you expect: sync a device and it is registered. This does not work in Mi7.1
In MI7.1 you need to create a device for a user first, before you are able to sync and get data.
To do this, open the Mobile Administration Portal in MI7.1, go to Administration and create a device for your user. Once this is done, you need to Enable the device.
If the device is enabled, in status INITIAL and has the correct user assigned, you can sync this device with the MI server.
Hope this helps!
Regards,
Oliver

Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face.

Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face. This is an Ipad not an Ipad2...I can't get this thing recognized by either my desktop or laptop. It used to work...not now.
Any ideas?

Did you already have a look at this article?
iOS: Device recognized in iTunes for Mac OS X

Itouch 3rd gen not recognised in Windows vista but ok in itunes (code 10 error)

Windows Vista pc running latest itunes. pc will recognise itouch 3rd gen in itunes but not in explorer. device driver posts a code 10 error. checked for update driver, response in latest driver installed (digital camera). Need help to be able to download photos in itouch.

Thanks IIIaass, I have checked to see that the Vista pc hase the lastest driver (confirmed latest drivers, incl MTP USB drivers) and tried uninstalling and reinstalling itunes no luck.
I am having the same problem on another computer running windows 7 - itunes ok but code 10 error as well. I have also tried uninstalling and reinstalling itunes on this pc as well - no luck.
Any other suggestions?

Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Hi experts,
I have a big issue in production server,
the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
if i am reprocess or press F6 it is going manually.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards,
Kiran polani

Dear Sriram Ramani,
in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
but my problem is in Soap to RFC case..
for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
not for all signals for few signals for some time..
Why it is happening i can't understand.
in repository it is saying Repsitory object hmi failed and address already in use.
is there any problem with loading IR objects.
Please suggest me good suggestion for this type of issue what can do for this to resolve.
Regards,
Kiran Polani

CLIENT_SEND_FAILED error code: 500, error text: Internal Server Error

Hi,
Developed Proxy <-->PI<-->JDBC SELECT scenario and getting the following error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
When I cross checked the JDBC Receiver communication channel in Runtime Work Bench
request and response were successfull. RWB shows the following message.
2009-06-12 09:34:50 Information The message was successfully received by the messaging system.
2009-06-12 09:34:50 Information Message successfully put into the queue.
2009-06-12 09:34:50 Information The message was successfully retrieved from the request queue.
2009-06-12 09:34:50 Information The message status was set to DLNG.
2009-06-12 09:34:50 Information Delivering to channel: DB2ReceiverTableSPT
2009-06-12 09:34:50 Information JDBC Adapter Receiver processing started, required QoS BestEffort
2009-06-12 09:34:50 Information JDBC Adapter Receiver Channel DB2ReceiverTableSPT:
2009-06-12 09:36:35 Information Database request processed successfully.
2009-06-12 09:36:35 Information The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2009-06-12 09:36:35 Information The message status was set to DLVD.
I had gone thru all the previous threads related to 'CLIENT_SEND_FAILED' but
those did not solve my problem.
Can some one help me to solve this issue.
Thanks,
Vijay.

I made necessary changes as per the blog. Appended '_response' for JDBC response structure.
Still I am facing same problem.
Strange....delibarately gave the link so that you can cross-check the JDBC config on receiver side...I assume that the proxy is configured properly with the Sync communication....also mapping is done accordingly...
Regards,
Abhishek.

Generic oracle eway code generation error in Java caps 5.1.3

Hi,
I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
     at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
     at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
     at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
     at org.openide.util.Task.run(Task.java:136)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
     ... 10 more
Regards,
Abdul

hi...
i too getting same problem..how did u reslove this...
please help me out...
thanks in advance
KK

Report App Server;Error code:-2147215349 Error code name:docNotReady.......

Hi Experts,
In our application we are trying to connect to the RAS server for the ad hoc reporting capabilities that allow users to modify reports over the Web.
In order to do this what are servers need to run on the server side( I am looking for settings on server side like, what are the servers and services to be run on).
When we try to open the document we are getting the error. The code and error msg are as follows.
private void GetReportClientDocument()
          try {
               sessionManager = CrystalEnterprise.getSessionMgr();
               enterpriseSession = sessionManager.logon(username,password, servername, "SecEnterprise");
               iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
               String sampleReportName = "Test_Open";
               IInfoObjects infolist = iStore.query("Select SI_CUID From CI_INFOOBJECTS Where SI_NAME='" + sampleReportName + "' and SI_INSTANCE=0");
               int lookUpId = 0;
               for (int i = 0; i < infolist.size(); i++) {
                    IInfoObject siId = (IInfoObject) infolist.get(i);
                    lookUpId = siId.getID();
               System.out.println("The CUID is: "+lookUpId);
               IInfoObjects list = iStore.query("select * From CI_INFOOBJECTS Where SI_ID="+lookUpId);
               IInfoObject report = (IInfoObject) list.get(0);
               ReportClientDocument rcd = new ReportClientDocument();
               IReportAppFactory appFactory = (IReportAppFactory) enterpriseSession.getService("RASReportFactory");
               try {
                    System.out.println("Name of Document: "+rcd.getReportDocument().getName());
                    rcd = appFactory.openDocument(report, OpenReportOptions._openAsReadOnly,null);
               } catch (ReportSDKException e) {
                    e.printStackTrace();
          } catch (SDKException e) {
               e.printStackTrace();
Error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKClientDocException: The document has not been opened.---- Error code:-2147215349 Error code name:docNotReady
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKClientDocException.throwReportSDKClientDocException(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDatabaseController(Unknown Source)
     at Viewer.GetReportClientDocument(Viewer.java:98)
     at Viewer.main(Viewer.java:27)
Thanks in advance for your help.

Hi Qiang,
Please check http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=1047650.6 for possible solutions for this error.
Thanks,
Erik

The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed

Friends,
I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
Any suggestions would be very helpful.
Thanks in Advance,
Bharath

Apply trace on RAS and look for errors in the RAS logs at the same timestamp.
These errors come for various errors and tracing RAS would give us a better idea.
It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
Thanks,
Prithvi

Exit Code 6 error on installation.

I have installed and reinstalled CS5 a number of times and receive the Exit Code 6 error message. It says I have 0 fatal errors, 21 errors and 1 warning.I am running Windows 7 Ultimate x64 with 4Gb of ram and an Intel core i7 processor . I have tried the following
Restarting computer in minimized state
Repaired the Microsoft Windows Installer
Uninstalled and reinstalled Air
installed as a trial version
but no satisfaction. Same messages'
I have a copy of the log file but this site will not let me post it
A summary of the summary says
Warning :1ArkServiceControl ::Start Service:Service not started/stopped Switchboard. Current State:0 Exit Code: 0 Service Specific Exit Code:0
then there are four Error 31
     four Error 32
     four Error 47
     four Error 48
then payload errors
The problem is that once I have had a session on CS5 if I close it down it will not reopen until I restart the computer.
Are these errors related to this problem.

I have installed and reinstalled CS5 a number of times and receive the Exit Code 6 error message. It says I have 0 fatal errors, 21 errors and 1 warning.I am running Windows 7 Ultimate x64 with 4Gb of ram and an Intel core i7 processor . I have tried the following
Restarting computer in minimized state
Repaired the Microsoft Windows Installer
Uninstalled and reinstalled Air
installed as a trial version
but no satisfaction. Same messages'
I have a copy of the log file but this site will not let me post it
A summary of the summary says
Warning :1ArkServiceControl ::Start Service:Service not started/stopped Switchboard. Current State:0 Exit Code: 0 Service Specific Exit Code:0
then there are four Error 31
     four Error 32
     four Error 47
     four Error 48
then payload errors
The problem is that once I have had a session on CS5 if I close it down it will not reopen until I restart the computer.
Are these errors related to this problem.

VB ActiveX User Control fails to install on Windows 8 using IE10 with Code Download Error: (hr = 80070005) Access is denied.

I have a VB VS2008 (.Net 2.0) ‘pure’ .NET based user control which used to be hosted in Internet Explorer.
Because that approach is no longer possible in VS2013 (.Net 4.5) I have converted it to an VB ActiveX user control.
This process involves digitally signing the user control DLL.
Creating a setup project resulting in a setup.exe and MyUserControl.msi.
Digitally signing both those components and then producing a cab file (which again is digitally signed).
IE10 should then be able to install this using an object tag as follows
<object id="editor" height="100%" width="100%"
classid="clsid:EA47DB16-9272-4CB3-A800-C369A479396A" codebase="cab\MyUserControl.cab#Version=6,0,11,1" VIEWASTEXT>
If I use the setup.exe and MyUserControl.msi directly on the client windows 8 machine before starting IE10 then the control is already installed (shows up in Programs and Features) and it works.
If I don't do this and let IE install the control then it doesn't work.
What I see is the IE prompt
This website wants to install the following add-on: 'MyUserControl.cab'
Clicking on install produces the User Account Control MsgBox
Do you want to allow the following program to make changes to this computer
Clicking yes doesn't install the control as expected
The inf file that I'm using is currently
[version]
signature="$CHICAGO$"
AdvancedINF=2.0
[Add.Code]
setup.exe=setup.exe
MyUserControlSetup.inf=MyUserControlSetup.inf
MyUserControlSetup.msi=MyUserControlSetup.msi
[setup.exe]
file=thiscab
[MyUserControlSetup.inf]
file=thiscab
[MyUserControlSetup.msi]
file=thiscab
[Setup Hooks]
RunSetup=RunSetup
[Deployment]
InstallScope=user
[RunSetup]
run="%EXTRACT_DIR%\setup.exe"
I have defined the registry setting ForceCodeDownloadLog
Examining the temporary internet files location after trying to install using IE10 I can see the following
*** Code Download Log entry (15 Jan 2015 @ 11:49:18) ***
Code Download Error: (hr = 80070005) Access is denied.
ERR: Run Setup Hook: Failed Error Code:(hr) = 80070005, processing: %EXTRACT_DIR%\setup.exe
LOG: Reporting Code Download Completion: (hr:80070005 (FAILED), CLASSID: ea47db16...,

The problem here was the cab file.
Using ProcessMonitor I found that the following entry was generated at the time of failure
16:48:00.9222751 2920 IEInstal.exe CreateFile
C:\Users\Jim\AppData\Local\Temp\IDC2.tmp\setup.exe NAME NOT FOUND Desired Access: Read Attributes, Read
Control, Synchronize, Dis, Options: Synchronous IO Non-Alert, Non-Directory File, Disallow Exclusive, Attributes: n/a, ShareMode: None, AllocationSize: n/a
Analysis of the contents of the cab file using PeaZip indicated that it didn't contain setup.exe which confused me for a while as the makecab /f MyUserControlSetup.ddf produced no errors.
The MyUserControlSetup.ddf contained
.Set DiskDirectoryTemplate=cab
.Set CabinetNameTemplate=DocEditor.cab
MyUserControlSetup.inf
MyUserControlSetup.msi
setup.exe
Using makecab /f MyUserControlSetup.ddf /v3 I saw that the output was being written to 3 'disk' files but only one was present in explorer after it finished.
So I guessed that the output was for floppy disks and changed MyUserControlSetup.ddf to contain
.Set MaxDiskSize=CDROM
.Set DiskDirectoryTemplate=cab
.Set CabinetNameTemplate=DocEditor.cab
MyUserControlSetup.inf
MyUserControlSetup.msi
setup.exe
PeaZip now indicated that the cab file contained the 3 files I expected and using that cab in the codebase attribute installed my ActiveX control

I own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error. i am using copy and paste to prevent miss typing the code.

i own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error. i am using copy and paste to prevent miss typing the code.

Hi Lawrence,
Please try the steps mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html
Regards,
Rave

Indesign code 5 error

Similar Messages

Maybe you are looking for