InDesign crashes continuously when trying to export into PDF - Urgent Help!

Hello All,
I'm facing the issue like InDesign is getting crashed continuously when trying to export directly the PDF, I'm using InDesign CS5.5. Please suggest urgently.
Thanks,
Praveen

Gejaraja wrote:
I tried with script, but later assumed it's crashing even doing manually using File -> Export.
Sorry, that's terribly unclear.
Is it crashing with BOTH the script and File > Export?
Is your script using exportFile or asynchronousExportFile?
If it crashes manually, have you tried disabling asynchronous exports per Re: Background PDF export Help?

Similar Messages

IDCS3 crashes when trying to Export or PDF

IDCS3 crashes when trying to Export or PDF.
What are the steps I should take to resolve this?
Thanks!

figured it out:
- power off mac and turn back on while holding down Command + R (dont do it on an external keyboard just to be safe)
- choose the re-install Lion option (I'm sure there is another way to re-install Lion, this is just the way I did it, not saying its the best or only method)
- DO NOT INSTALL MACBOOK (Mid 2012) Software Update 1.0 - THIS SCREWS ADOBE UP!

CS 3 InDesign Crashes when trying to Export To PDF

Our File Problem
Dell Microsoft XP service pack 2
Mac Intel Duo, Tiger
CS3 Fully Updated as of 3/17/08
CS2 Fully Updated as of 3/20/08
The problem first arose back when we upgraded to CS3, we found that files inside our document were crashing InDesign CS3 when we went to print or export the document as a pdf, the file originally made an interchange file which we could work with in CS2 so we went back and avoided CS3 until the catalog was finished.
The problem arose again after we started using CS3 again, but not right away. Many documents have been built and exported and printed with no problem. I was able to find and fix the problem through a piece by piece removal process of elimination. I isolated the problem link, opened it in photoshop, made a new psd file and saved the new file with a different name. Problem solved.
The problem became more complicated recently when I created a document, filled it with links, exported the file, changed nothing but copy in the document went to export and the document crashed InDesign. I then started the process of elimination and found that the problem link was different every time, and when placed into another fresh document would export just fine. All of the links were re-created in photoshop and used to create another document. The document was re created on other machines, everything went well until drop shadows were added into the document, then it crashed InDesign and could not be exported to PDF. We then took the same document, with the drop shadows, exported it in Interchange to CS2 and the document exported just fine to PDF.
As a test on the drop shadow issue, we took a number of different files and tested these in CS2 and CS3 with and without drop shadows. Every file we tried in CS2 worked fine with and without a drop shadow. However ,we experienced a number of crashed of InDesign with the drop shadows on these files in CS3. It seems to be just a portion of images, of a certain type of product we carry, but other than that there is no consistency to what is causing the crash. We also tested other effects and had the same results with InDesign CS3 crashing.
The other issue we see with this is that before the 1st of the year, we were able to export the same images in InDesign with the drop shadows and other effects. It seems that since the first of the year, the same images are not longer able to export from CS3 to a PDF. A couple of the possible thoughts we had were that there was an issue with recent updates in CS3, to test this we are going to uninstall CS3 and reinstall without running updates. We also are going to try to recreate the files that crashed InDesign and see if they can crash again on export.
Has anybody else experienced any similar issues? Does anybody know of a way to identify the problem in CS3 or with our files other than through trial and error? This is a major issue and problem for us since we are primarily a catalog based business and cannot have out catalog crash unexpectedly when we spend months working on it.
This problem is also not operating system specific, it is happening on both machines listed above

Dean,
We found that the issue is a bug in the program, and this was the response i Got from an Adobe guy:
Initial Response:
Thank you very much. Weve been able to reproduce the crash. It appears the underlying bug is triggered by having tall narrow PSD images and transparency effects (i.e. drop shadow). Well be working to further understand the root cause, and then working on a fix for a future release/update.
In the interim the best workaround I can come up with is to rotate the canvas in Photoshop 90 degrees so the image is short and wide, and then rotate it -90 degrees in InDesign after placing so you get the vertical orientation you want. The bug is triggered when processing the data as saved by Photoshop, so avoiding the tall and narrow psd should avoid the bug.
Im sorry to not have an easier workaround or immediate fix. Please let me know if you encounter any new crashes. Ill let you know if our further investigation changes our understanding of the root cause of the bug.
Second response:
Well, I have a bit more info. Switching from a tall narrow image size to a short and wide one should avoid the crash for any specific image that crashed when tall and narrow, but unfortunately the root cause of the bug is in code that could potentially be triggered by any image. It appears to be exceptionally rare for other image proportions, but it is still theoretically possible. It just turns out its much more likely for a tall narrow CMYK+Alpha image.
So, as it stands I dont have a 100% guaranteed way to avoid this crash, but it should be much less common for short and wide images. If you do encounter the crash, switching the orientation should avoid the crash. Hopefully the orientation workaround will allow you to be productive with InDesign until a future release contains the fix.
Hope that helps

InDesign CS5 crashes when trying to export a PDF and/or a Warning dialog box appears!

Just bought a new macbook pro 15" non retina the other day and the SAME version of InDesign CS5 that was running on my 2010 iMac is now crashing each time I get a Warning dialog box and/or try exporting a PDF?!??!?! How was this NOT an issue before and now is??? Running the same Lion 10.7.4 as well....
Holding the alt key while deleting a page does help it not prompt the warning dialog box, but no help to exporting a pdf...
So guessing this is a Apple issue and we need an update or??
I am only using Fontbook and have NOT even added any new fonts yet, practically bare bones mac still with just CS5...
What is also weird is that the warning dialog boxes are always BLANK and have no text on them, like there is a font issue??
I've cleared the system font cache, reset InDesign prefs, reset PRAM and NVRAM, re-installed InDesign and updated to 7.0.4...
This is madness....please help me in the name of all that is good.
Crash:
http://pastebin.com/DYv0vwNQ

figured it out:
- power off mac and turn back on while holding down Command + R (dont do it on an external keyboard just to be safe)
- choose the re-install Lion option (I'm sure there is another way to re-install Lion, this is just the way I did it, not saying its the best or only method)
- DO NOT INSTALL MACBOOK (Mid 2012) Software Update 1.0 - THIS SCREWS ADOBE UP!

InDesign CS6 keeps crashing when trying to export to PDF

I never had an issue with this before, but now my InDesign is crashing every time I try to export to a PDF. The document is 22 pages long. I updated an older version that I had no problem with exporting to a PDF. Now I can't even take the older InDesign doc and make into a PDF. It just keeps quitting every time I try to export it. What could have triggered this issue and how can I fix it?
h.

see Adobe Community: File Crashing on Output - printing/PDF/other

Premiere crash down when trying to export Prores - on a mac!

Hi,
I have a Mac Book Pro, mid 2010, with Lion, and a new SSD drive. I managed to export 18mn in Apple Prores 422HQ, like the original footage, 2 days ago from Premiere Pro CC 2014. It took a while, around 3 hours, but it worked.
Today, when I try to export the same footage from Premiere in the same format Prores 422HQ, everything blocks and crashed down.
I tried to reinstall premiere, but it didn't change anything.
The only change I made on my computer within the last 2 days is to install a few apps from Final Cut Studio 3.
Does anybody know how to solve this problem in order to be able to export high resolutions formats?
Best,
Tom

Rebecca, did you find out what was causing this issue? I have recently come accross the same problem..think mine might be related to using Utimaco encryption software on my local drive when the password changes?
Hoping for some good news...
Simon

Crashing - Freeze when trying to export more then one project in compressor

when i set more then one final cut project to convert a DVCPRo HD project to DVD media or quicktime during the first batch project the system freezes. I used to be able to do multiple
projects over night or the weekend and now i have to do one at a time.
THOUGHTS???
here is the error message received:
panic(cpu 0 caller 0x0019A566): interlock timeout for mutex 0x806e808
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x4885bdb8 : 0x128d08 (0x3cb134 0x4885bddc 0x131de5 0x0)
0x4885bdf8 : 0x19a566 (0x3d0020 0x806e808 0x257eef8 0x1d18a0)
0x4885be28 : 0x197e97 (0x806e808 0x206 0x4885be58 0x32fd40)
0x4885be38 : 0x32fd40 (0x806e808 0x1 0x7a2220c 0x7464ce4)
0x4885be58 : 0x3319fa (0x7fca320 0x10 0x0 0x32cfd8)
0x4885bea8 : 0x33bbb3 (0x85c5bb8 0x2 0x714c290 0x85c5d70)
0x4885bef8 : 0x33be49 (0x85c5bb8 0x1 0x4885bf28 0x32d034)
0x4885bf28 : 0x33bfd1 (0x85c5bb8 0x1 0x85c5bb8 0x1)
0x4885bf58 : 0x379e23 (0x85c5bb8 0x7fc5e70 0x7fc5eb4 0x0)
0x4885bfc8 : 0x19b17e (0x7d0e200 0x0 0x19e0b5 0x7d10b20) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb0638d68
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 3 GHz, 4 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 667 MHz
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-4
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-4
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-3
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-3
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: Hitachi HDS725050KLA360, 465.76 GB
Parallel ATA Device: SONY DVD RW DW-D150A
Fibre Channel Device: SCSI Target Device @ 0
Fibre Channel Device: SCSI Target Device @ 0
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Microsoft Basic Optical Mouse v2.0, Microsoft, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown

no. I just tried compressing 2 HD projects to dvd last night and half way through the first it appears the system crashed.
the crash report is as follows -
I did the update - same issue PLEASE ANYONE HELP????????
THANKS
panic(cpu 3 caller 0x0019A566): interlock timeout for mutex 0x70dff78
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x487abce8 : 0x128d08 (0x3cb134 0x487abd0c 0x131de5 0x0)
0x487abd28 : 0x19a566 (0x3d0020 0x70dff78 0x16 0x70defa4)
0x487abd58 : 0x197e97 (0x70dff78 0x206 0x487abdf8 0x331d2f)
0x487abd68 : 0x331d2f (0x70dff78 0x7ba1dac 0x12f572 0x0)
0x487abdf8 : 0x331fad (0x7bd5920 0x70dff44 0x7ba1dac 0x320995)
0x487abe38 : 0x339531 (0x7ba1dac 0x8 0x0 0x58b4a000)
0x487abec8 : 0x13b4f4 (0x7ba1dac 0x1 0x487abef8 0x199ef1)
0x487abef8 : 0x13cd1a (0xc26b360 0x0 0x487abf28 0x1a3010)
0x487abf38 : 0x13cb77 (0xc26b380 0xc26b0d8 0xc3f269c 0xc3f2658)
0x487abf78 : 0x127406 (0x1 0x0 0x1 0x14)
0x487abfa8 : 0x1a2f8d (0xffffffff 0x1 0x0 0xc3eebc0)
0x487abfc8 : 0x19ad06 (0x0 0x1 0x19e0b5 0xc3eebc0) Backtrace terminated-invalid frame pointer 0x487abf58
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 3 GHz, 4 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 667 MHz
Network Service: Built-in Ethernet 1, Ethernet, en0
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-4
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-4
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-3
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-3
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: Hitachi HDS725050KLA360, 465.76 GB
Parallel ATA Device: SONY DVD RW DW-D150A
Fibre Channel Device: SCSI Target Device @ 0
Fibre Channel Device: SCSI Target Device @ 0
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Microsoft Basic Optical Mouse v2.0, Microsoft, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown
FireWire Device: unknown_device, unknown_value, Unknown

Keynote 6.1 crashes/hangs when trying to export to QT

The new keynote hangs and freezes when exporting in either 720p or 1080p.
It still does it if I export to Keynote 09 and then try and export from that presentation.
Have re-installed programme - no help
Any help please?

sorry for the delay...this only happens with safari since the upgrade to 6.1 and that's the only one I'm using now..I am networked to a Toshiba Estudio 2540C and to an HP Design Jet 800PS.

Missing parameter values when trying to export to pdf in C#

HI all,

I'm having a problem passing a parameter from my c#.NET code through Crystal Reports 2008...

Crystal Reports Developer version 12.1.0.892
using a WinXP machine
The parameter I've setted up in Crystal Reports Design is one to dynamically change the query that will run on the report:
"SELECT * FROM REPORTS.{?Protocolname}_FC_QUERY"


The code I use calling one of the reports I must provide:

using System;
using System.Collections.Generic;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
using System.Data;
using System.Data.OracleClient;
using System.Collections;
namespace CrystalReportsRapportjes
{
class MainClass
{
public static void Main(string[] args)
{
Console.WriteLine("Start of program!");
string connString = "server=CT_PRD;user id=report;password=report";
OracleConnection conn = new OracleConnection(connString);
try
{
conn.Open();
Console.WriteLine("Connection opened.");

Console.WriteLine("Connection Properties:");
Console.WriteLine("\tConnection String: {0}", conn.ConnectionString);
Console.WriteLine("\tServerVersion: {0}", conn.ServerVersion);
Console.WriteLine("\tState: {0}", conn.State);
QL_ExportReport("C:\\Data\\converted2crystal\\PLANNING_REPORT_params.rpt");

} catch (OracleException e) {
Console.WriteLine("Error: " + e);
} finally {
conn.Close();
Console.WriteLine("Connection closed.");
}
Console.WriteLine("End of program!");
Console.ReadKey();
}
private static void QL_ExportReport(string reportName)
{
ReportDocument CR_reportDocument = new ReportDocument();
DataSet ds = new DataSet();
CR_reportDocument.Load(reportName);
CR_reportDocument.SetDatabaseLogon("Reports", "Reports");
for(int i=0;i<CR_reportDocument.DataDefinition.ParameterFields.Count; i++)
{
Console.WriteLine("Reading parameters");
Console.WriteLine(CR_reportDocument.DataDefinition.ParameterFields.ParameterFieldName);
if(CR_reportDocument.DataDefinition.ParameterFields.ParameterFieldName==
"Protocolname")
Console.WriteLine("Correct parameter found, now assigning value");
ParameterValues ThisPV = new ParameterValues();
ThisPV.AddValue("TMC999C999");
CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.Clear();
CR_reportDocument.DataDefinition.ParameterFields.DefaultValues.Clear();

CR_reportDocument.DataDefinition.ParameterFields.ApplyCurrentValues(ThisPV) ;
//CR_reportDocument.SetParameterValue("Protocolname","TMC999C999");
//CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.AddValue(ThisPV);
}
CR_reportDocument.Refresh();
CR_reportDocument.ExportToDisk(ExportFormatType.PortableDocFormat,"C:\\Data\\converted2crystal\\EDC_PLANNING_RPT_params.pdf");
CR_reportDocument.Close();
}
}
}

The exceptions he throws using this code is = CrystalDecisions.CrystalReports.Engine.ParameterFieldCurrentValueException: Missing parameter values. ---> System.Runtime.InteropServices.COMException: Missing parameter values.
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk
at CrystalReportsRapportjes.MainClass.QL_ExportReport in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 72
at CrystalReportsRapportjes.MainClass.Main in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 33

When I use the code
CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.AddValue(ThisPV);
instead of
CR_reportDocument.DataDefinition.ParameterFields.ApplyCurrentValues(ThisPV) ;

the error I get there is:
System.ArgumentException: Value does not fall within the expected range.
at CrystalDecisions.Shared.SharedUtils.ConvertToDecimal
at CrystalDecisions.Shared.ParameterDiscreteValue.set_Value
at CrystalDecisions.Shared.ParameterValues.AddValue
at CrystalReportsRapportjes.MainClass.QL_ExportReport in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 69
at CrystalReportsRapportjes.MainClass.Main in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 33



Can someone please tell me what's the right way passing a parameter to a report?

Thanks in advance.

You should use the
ReportDocument.SetParameterValue("ParameterName", "ParamValue");
>
Els Cochez wrote:
> When I use the code
> CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.AddValue(ThisPV);
> instead of
> CR_reportDocument.DataDefinition.ParameterFields.ApplyCurrentValues(ThisPV) ;
> 
> the error I get there is:
> System.ArgumentException: Value does not fall within the expected range.
> at CrystalDecisions.Shared.SharedUtils.ConvertToDecimal
> at CrystalDecisions.Shared.ParameterDiscreteValue.set_Value
> at CrystalDecisions.Shared.ParameterValues.AddValue
> at CrystalReportsRapportjes.MainClass.QL_ExportReport in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 69
> at CrystalReportsRapportjes.MainClass.Main in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 33
> 
> 
> Can someone please tell me what's the right way passing a parameter to a report?
> 
Try parsing the parameter value to a decimal value before setting it as parameter value.
Hope this will help

I keep getting "Conversion Failure" when trying to export a PDF to Word or Excel.

Not working for the file I need ro convert to Excel.
Also, since this happened, I can no longer click "Convert" from within Adobe Reader.

Hi,
I tried to convert PDF through Acrobat.
But it seems there is some corruption in file format.
This PDF is created by 'Nitro Reader 2(2.1.1.3)'.
Please refer to this link for non Adobe application support policy:Support Policy for PDF Files created by non Adobe applications
Regards,
Florence

Error 310 when trying to log into iTunes Store - HELP!!

I am trying to access the iTunes Store on my PC and i keep getiing the Error 310 notice. Can anyone help?

From an earlier post by b noir:
Is your Java version up to date on the PC?
http://www.java.com/en/download/installed.jsp
If not try updating that. Restart the PC and try visiting the Store again.
Cheers,
GB

Error message when trying to export pdf to excel

i keep getting an error message when trying to export a pdf to excel

Hi ,
Could you please elaborate more about the issue ?What exactly are you trying to perform and how are you trying to do the same?
Are you using Adobe Reader or Adobe Acrobat to export PDF to excel?
What software version are you using?
Also ,could you please tell what is that error message and it would be wonderful if you could share the screenshot of the error message with us so that we can assist you accordingly .
I would also like to know what OS do you work on ?
Is it happening with all kinds of PDF you are trying to convert or any specific one?
Please update me with above mentioned details so that we can assist you further .
Regards
Sukrit Dhingra

Media Encoder CC2014.2 crash on windows when trying to export when quicktime is installed

Hi,
I'm trying to export .mov files (created on random Mac computers in very hi-res) to reduce file size, and have the same output format. (possibly 1080p H.264-> .mp4)
I installed Media Encoder cc2014.2 on my pc (win7, 64bits, french).
When I first tested, Only the audio was being exported. But I soon realized I didn't had the proper codec installed on my PC.
(I wasn't able to play the original video file, only the audio was playing).
So, like a good boy I installed Apple Quicktime (7.76.80.95)
With quicktime on my PC I was able to play the original video file. (with quicktime player)
So I opened Media Encoder again, and on the preview this time I can see the video with the sound. But as soon as I start the coding (the little green arrow) Adobe Media Encoder crash.
I have tried multiple output format, it always crash right when I start exporting the file.
I uninstalled Quicktime, and media encoder is working again ... but my original files (.mov) can't be exported with video, only the sound.
I have tried a third party codec (K-Lite), I can see the video+sound on my pc, but Media Encoder is still blind, no video, only the sound.
Is there a way to add codec to Media encoder without having to install Quicktime?
Or a way to make Media Encoder work on my PC when Quicktime is installed?
btw I'm sorry if my text is a bit confusing, I'm french speaking
Thank's in advance!

The Error is back!!!
Yesterday it worked today it crashes when I export from premiere via media encoder. I tried it with all the things you told me:
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. Software only renderer => crash
These are the two logs that I found:
Ereignis-ID 1000
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...

Premiere Pro CC crashes when trying to Export Media

I really hope someone can help me with this.
I bought a brand new Dell XPS 15 because I will be studying multimedia production next year. Next week I'm registering for the art school and I'll be able to buy a CC student license. I installed the Creative Cloud Trial Version because I couldn't wait to check out the new features in Photoshop and Premiere Pro. However after working on a Premiere Pro project for several hours, the program crashed when trying the Export>Media function.
As soon as I hit Export>Media in every project I make in Premiere Pro, the following dialog box pops up: "Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.". I'm not able to export my project, not even by using the keyboard shortcut Ctrl+M.
I already tried reinstalling Creative Cloud, without any luck. Any idea what could be causing this? I really need this fixed before school starts, so help is much appreciated.
Here are my system specs:
- Intel Core i7-4712HQ processor
- 16GB DDR3L RAM
- Nvidia GeForce GT750M 2GB
- 500GB SSD
Thanks to everyone willing to take a look at my problem.

Hi John,
Thanks for your response. I checked all those links but I'm afraid none of those solves my problem. My GPU drivers are up to date and changing BIOS settings to fixed to disable Nvidia Optimus doesn't work as well.
I checked Windows Event Viewer and the error shows as following:
EventData
Adobe Premiere Pro.exe
8.0.0.169
536f4f89
MSVCR110.dll
11.0.51106.1
5098826e
c0000409
00000000000740c4
21b4
01cf994108252059
C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
C:\Windows\SYSTEM32\MSVCR110.dll
a2ad4021-0534-11e4-8260-e82aea8638f9

IPhoto crashing when trying to export pictures

iPhoto crashing when trying to export pictures

Trash the HP Plug in from /Library/Application Support/iPhoto
There are two libraries where this plugin might be
HD/ Library
and
HD/Users/Your Name / Library
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
as well as within the Application package
/Applications/iPhoto.app/Contents/

InDesign crashes continuously when trying to export into PDF - Urgent Help!

Similar Messages

Maybe you are looking for