InDesign CS 5.5 will not launch on new IMac running OS X Mountain Lion...solution? Please...

I recently got a new IMac running OS X Mountain Lion. InDesign CS 5.5 will not launch, is there a solution?

Similar Messages

GarageBand will not update via MacApp Store (running OS X Mountain Lion)

Hi I have recently purchased a MacBook Pro 2012 (Ivy Bridge) and I was using GarageBand and was trying to get extra instruments and GarageBand said I could either
a) "Download now" or b) "download later"
and the 1st option I click it claims that it is currently downloading but I waited and waited and even restarted GarageBand an hour later and none of the instruments showed up. And the I also tried "download later" and that option stated that I would get a notification in the MacApp Store to update when I opened it and it nothing showed up. What must I do to update, I really like GarageBand and I'm using it to make a little bit of music but I'd like to know what I must do in order to get the other instruments on there.

However, when I delete the GB app and the folder in the application support and try to install GB 6.0.5 Update it displays a message "Garageband 6.0 or later is required to install this update".
If your GarageBand came preinstalled or you bought it from the AppStore, you have to sign into the AppSTore with the Apple ID you used to accept or purchase GarageBand, Then download and reinstall from the "Purchased" tab of the AppStore. You cannot use the updater from the support page.
Regards
Léonie

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot). It also does not show up in the ;ist of pritnters, scanner when I open Image Capture. I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below: Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

Adobe Illustrator will not launch when Flash is running

A few of our users have reported that once Flash is running Adobe Illustrator will not launch. We are moving from Windows XP SP2 to Windows XP SP3. The version of both Illustrator and Flash is CS2 (will be upgraded later to CS3).
This used to work on SP2 - anyone can give some hints on this?

Nobody ever solved this

I have purchased a MacBook Pro with Retina display, but it will not arrive within 30 days of my purchase. Does this mean I will not be able to update the software to Mountain Lion?

As already stated, I have recently purchased a MacBook Pro with Retina display. It will arrive in 4-5 weeks so I don't assume it will arrive in less than 30 days. I would like to know wheather I will still be entitled to a free softwere update to the Mountain Lion. The laptop will ofcourse be completely new and recently purchased, so it would be very disappointing if I am not entitled to this update. Please let me know if you know anything about this or have any assuptions. Thank you

You can call apple if you need reassurance, but they will not turn you down on the free upgrade just because you have not received your computer by day 30.

Macbook Pro will not shut down/restart/sleep/log out after Mountain Lion update

Dear all,
I upgraded from Lion to Mountain Lion yesterday and since then I have encountered a few issues:
- The only way I can shut down my computer is to hold down the power button or entering commands in terminals. The commands under the Apple menu do not work at all. No window opens when I click on it.
- The about this mac, force to quit, sleep, shut down and restart button, log out do not work.
- When I restart my computer, it takes 3-4 minutes to log into the account (it used to be less than 1 minute, I have an SSD).
I have tried all of these solutions to solve the problem:
- I created another user account and I do not encounter the same problems. It logs in quickly, can shut down etc.
- I have repaired the disk and the disk authorisations using disk utility
- I have cleaned up all caches and did maintenance using OnyX
- I have cleaned up all ACL using terminal
- I have never installed Kapersky (this was the cause of the problem for some people in the past)
I am starting to be a bit short on ideas. All I know is that there is a problem with my user account. I do not want to do a clean install as I have quite a lot of work stored on this user account and preferences that took me ages to set up. If I have to start fresh I will but I would rather avoid this extreme solution.
Has anyone else experienced such an issue? If yes, how did you solve it?
Thank you very much

Had the same problem and this worked for me:
Try deleting following two items:
~/Library/Preferences/com.apple.dock.plist
~/Library/Preferences/com.apple.dock.db
Make sure you take a screenshot of your current dock since deleting these files will reset your dock to default.
Now open terminal and do a sudo reboot w/ your password.
This solved the problem for me.

IMovie 10.0.5 will not open on new iMac

iMovie 10.0.5 will not open on my new iMac - Force quit simply states that iMove is not responding

Apple offers an inexpensive cross grade or upgrade to Universal Binary versions of FCP for about a year a half. It expired a year ago.
Apple post this upgrade on its web site for FCP during that time, and then extended deadline twice.
An upgrade to a Intel version now is $499 to $699 depending on what you have

PSE 8 will not install on new imac OSX Snow Leopard

28. Feb 26, 2010 4:16 PM in response to: docmark86
Re: PSE8 will not install on Mac Snow Leopard 10.6.1
I have a new iMac 21.5 screen with OSX Snow Leopard. I installed IWork and turbo tax with no problem. Nothing else.
PSE 8 installation fails after about 80% installation just as install for PSE 8 starts. I've spent hours on the phone with Adobe and they blame it on OSX Error analysis states: "Uncaught JavaScript exception: Unable to read Adobe file version for path /Library/Fonts/MinionPro-Bold.otf Apple techs have also tried." The latest communications from Adobe instructs me on validating fonts. We have also tried CS3 Clean Script since the install failed several times. Case # is 0181442609. Nothing works and Apple techs are still researching. Any suggestions from an Adobe professional? I am new to the Mac environment so any complicated actions may require some "hand holding".
Thanks to all!
Doc

Doc, I would suggest go to the font location which from your post is: <Macintosh HD>/Library/Fonts/MinionPro-Bold.otf. There should be a font file with this name. If it exists, just "cut" it from this location and paste it on the desktop for some time and then try to install PSE again and see if that works.
If the font file doesnt exist and instead an empty folder names "MinionPro-Bold.otf" exists, then delete the folder and then try to install PSE again.
In either case, please do attach the installer log file in the forum thread so that I can have a look at it. They can be located at the below location:
<Macintosh HD>/Library/Logs/Adobe/Installer/"...Adobe Photoshop Elements 8.0...."
If there are multiple copies of the installer log files, then please delete them and then try to install PSE 8 again. If it fails, quit the installer and attach the new log files which are generated to this thread.
Regards,
Ankush

ScanGear MX700 Drivers will not install on new iMac

I am new to Mac, so I'm not sure if I am missing a step. Using the install disk that came with my new Canon MX700 I installed the scanner drivers in the series:
ScanGear MX700 series 1370.mpkg
IJ Scanner Selector 220.pkg
ScanGear MX700 series 1370.pkg
ScanGear MX700 series Network 1370.pkg
After I load each package, I allow the computer to restart to complete installation as suggested after each download.
I've turned the printer off and on (using USB to connect to iMac). When I attempt to scan using the menu on the Canon, a window pops up: "Scanner is not selected. Click [Scanner Selection] to select scanner. Scanner driver will be closed." When I select "Scanner Selection" another window opens called "Canon IJ Network Scanner Selector" but there is nothing in the Network Device List to select. Under TWAIN Data Source Name is "Canon MX700 series Network", but there is nothing with a MAC Address. I am unable to select anything and that is as far as I've gotten.
HELP!

If you are using the control panel on the MX700 to scan, then after you press the SCAN button, you are prompted to select the connection method > Local (USB) or 'LAN Connected'. Based on the message you are getting, and since you have the MX700 connected via USB, I would guess that you are selecting 'LAN..'. If at this stage you use the arrow up or down key to select 'Local', then I believe you will not get the message.
If you are scanning from your iMac, rather than using the MX700 Control Panel, then you do not need to configure the IJ Network scanner since you have the MX700 connected via USB.
You should be able to open an application like Image Capture to check the USB connection. If a message stating that 'No Image Capture device is connected', then click on 'Devices' and then 'Browse Devices'. The 'Image Capture Device Browser' should appear showing the MX700 under TWAIN Data Sources. If you select this entry it should show it as connected. If it doesn't show it as connected, then you could have a problem with the USB cable. A previous post had a Canon user capable of printing but they were unable to scan and the included USB was the fault.
If the connection is okay you should be able to scan using the Image Capture application. After the prescan is performed, you must select a portion of the displayed image using your mouse by dragging from one corner to the opposite corner. Now the SCAN button will be available.
Note also that you can use the Preview application to scan.
HTH
PaHu

Despite having all the correct serial #'s CS3 will not install on new Imac

Hi,
Please Help.
I am trying to install CS3 on my new iMac 27 running 10.62.
First I just put in the CS3 disk, and when it came time for the full version number of
CS(full version). It would not accept it. Then I tried the serial number from my copy of
PS 7 (Full version), it would not accept that. Then I copied my copy of CS to the application folder
on the new machine and tried to install CS3 again. No go.
It could not detect the copy. Am I doing something incorrect?
I checked and rechecked the serial numbers, they are correct.

Bob, Thanks . This is what happened. I pulled my serial number from the start page of PS7, except it was an update 7.01 and I didn't notice. Anyway I pilled the disk and got the number off it. It installed fine.
Mot

HT1338 My mac mini will not allow me to update itunes with osx mountain lion 10.5. I check for software updates and it says none.

what shall' I do?

10.5 is not Mountain Lion. You need to find out what release of OS X is on your Mac. Go to >About This Mac and tell me what you see.

BlackBerry Link will not install on new Laptop running Windows 8

I have been trying to download Link from BlackBerry.com over several days now. on a new laptop running Windows 8
I get a message saying the *Wizard was interrupted before BB Link could be completely installed. * it suggests that * the system has not been modified and that I try again at another time and run the set up again.* I have done so at least 1/2 doz.. times with no success.
Pleas advise as to corrective actions to take and/or solutions to this problem.
Thanks in advance
Robert Mathieson

Hello robertian047,
Sorry to hear about your issue.
Have a look at the following article which may help you out.
Wizard was interrupted before software could be completely installed
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

IPhone 5 will not sync with new iMac

Whenever I plug my iPhone 5 into my new iMac, I get a message that reads, "iTunes could not connect to this iPhone. Could not allocate a resource". What's the deal?

Try resetting the Lockdown folder as described in itume #7 in this article: http://support.apple.com/kb/ts2529.

InDesign CS5.5 will not launch on new MacBook Pro

I have a new MacBook Pro and a new install of CS 5.5. All apps launch and run with the exception of InDesign. Trying to open a new or existing InDesign filr results in the spinning beach ball of death that can only be exited by a force quit; InDesign not responding. Anyone else experience similar? Any suggestions?

See http://forums.adobe.com/message/4150475#4150475

My InDesign, Illustrator and Photoshop will not launch - error number 213:19

Can someone please help me?
After attempting Launch all three applications I was sent error 123:19 and asked to restart my computer however it has still come up.
What does this mean and how do I fix it

I think this is a permissions issue. Are you using an account with Adminsitrator or restricted permissions?
Are the the applications fully patched? That's helps some users with this error. If you can launch any of the CS5.5 programs you should be ale to launch the Adobe Updater from the Help menu, otherwise try downloading the latest patches manually for each application from the Adobe.com website.
Finally, see http://helpx.adobe.com/photoshop-elements/kb/licensing-problem.html This particular article is for Photoshop Elements, but it appears to be generic in application.
If all else fails, uninstall, run the clean tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) and reinstall.

InDesign CS 5.5 will not launch on new IMac running OS X Mountain Lion...solution? Please...

Similar Messages

Maybe you are looking for