Indesign CS3 & Epson r2400 not printing tabloid paper

Indesign CS3 & Epson r2400 not printing tabloid paper. MAC OS 10.5.6. Have tried all configurations of page set up 11 x17 and 8.5 x 11 spreads, custom page sizes and default paper set up. The print comes out cut off. Epson says it's an Indd problem. Very inconvenient. Got any ideas?

I'm having the same problem with IDCS3 5.0.4 and an Epson Stylus PRO 3800 on Mac OS X 10.5.6 with version 6.11 of the Epson driver. I have a 17x17 document in InDesign that I am trying to print on 17x22 paper. The paper spools a little less than half-way down and the print begins, but it prints about 1/4 of the image--it is as if it cropped at 8.5x11 at the top right corner of the image.
I have had to resort to saving the file as a high-res jpeg and printing from Preview as a workaround. Unreal.

Similar Messages

10.9.2 Epson R2400 not printing anymore

Hello,
Just updated to 10.9.2 and my Epson Stylus Photo R2400 is not printing anymore.
It is connected via USB and worked flawlessly all the time before.
I get this message
What is going on here?
Thanks for Feedback
Bernd

Ok, what I did is deleting the Printer from the System and installing it again.
Works again

Epson R2400 not printing correctly!

Hi, I hope somebody can advise me, I have problems since installing leopard and can't solve them:
1. When I try to print a photograph from Photoshop CS3 using Leopard, the picture is almost colorless( if I print from CS3 using Tiger the colors are correct), The software options are also cut down and I cant access area's to set the print up for printing!
2 If I try to use my scanner as a photocopier using Vuescan the preview and scan appear to work as normal but when I click to print the article scanned the R2400 just pumps out a blank page (if I do the same using my older R200 the article prints as it should.
Has anyone any ideas as to whats happening? particularly regarding problem 1 above as thats more important than the vuescan issue?
Thanks in advance I value your help very much.
Regards Denisimo

I have been in contact with Epson and solved this problem. See my post on Mac Pro forum " Problem with Epson Stylus Photo R2400 Printer on Leopard OSX"
Thanks for your advice
Regards denisimo

CS3, Epson 2880 - Dark Prints

Hopefully some one might be able to help as I am a tad stumped with a problem of dark prints from CS3 on an Epson 2880.
Macbook Pro with 10.4 Tiger
I have a calibrated monitor
CS3 setup with American Prepress colour settings
Raw picture imported into CS3 with Adobe RGB profile
So I edit the picture as required and then open the print window where I tell photoshop to manage the colours and select the correct ICC profile for my printer and paper. I then go to the Epson print driver and select the correct media type and turn off colour management.
The picture that is printed is 1 to 2 stops darker than what is should be.
Now the strange thing is if I use the Epson Print Plug-in the picture that it displays is generally dark like the print output.
If I didnt know better I would say that another ICC profile is being applied to the picture as it moves either to the print driver or to the Epson Plug-in.
If I check the picture in CS3 with proofing then I get a small colour change as expected but not the dark print that comes out.
Any suggestions much appreciated as this is doing my head in.

Please do a forum search. There are already at least two other threads on the subject of dark prints.
Here are examples:
Eric Chan, "PS3 prints fine, PS4 prints too dark, same Mac" #12, 12 Dec 2008 6:07 am
Eric Chan, "Printer Dialog Box in CS4 - Printing Grayscale Images" #26, 4 Dec 2008 8:57 pm

Xerox Phaser 7300dn will not print tabloid

I have a user with an 20" iMac running 10.6.4 and Adobe CS4. In that office they have a Xerox Phaser 7300dn color laser printer. The user cannot print to tabloid paper. Everything prints on 8.5x11 paper regardless of settings. Happens in Illustrator, Photoshop, whatever. There are two older white iMacs on that same printer that are running 10.5.x, and they have no problems printing to tabloid on that same printer. I've uninstalled and reinstalled the latest drivers from Xerox. I've updated the firmware on the printer. All the options show up in the print dialog boxes. This has to be an issue with 10.6 since the other Macs running 10.5 and a PC running Windows XP don't have this problem. Anybody else experience this issue? Any fixes? I'm getting desperate.
Thanks.

I used to be able to collate just fine on my Laserjet 5000, but no longer. I, too, found that it made no difference whether I checked the box or not. Is this still another bug in 9.4.5? And yes, it is highly irritating.
David

Since installing Lion Adobe InDesign CS3 crashes when I print.

I upgraded to Lion yesterday and, now that I am at work, I find that InDesign CS3 (5.0.4) crashes when I print. It doesn't hang...it just pops. My printer drivers (for our Xerox WC7775, with Fiery) no longer work for my other applications (Word, BBEdit). To get CS3 to work I installed Java Runtime through the automatic installer.
Upgrading to CS5.5 is not possible, as our whole office is on CS3.
Is there anything I can do?

Well, I strongly feel it is an Apple issue. Granted I should have done more research before I upgraded, but I (naively) thought that Lionwould be another instance of Apple improving their product, and enhancing its capabilities. In this I was wrong. But then why produce an OS that's incompatible with a large block of your user base?
(1) OS-makers set the rules, and it is incumbent on them tobehave in a gentlewomanly/manly fashion. It seems inconceivable that it's in Apple's best interests to prevent Adobe products from working. Yet that seems to be the case here. It's like Bloom returning home in Joyce's Ulysses: it's dark and all the furniture has been moved.
     And fellow-software makers should help each other out: when there's a flood in anoffice building (as there is here) everyone drops what they're doing to pitchin.
    Maybe this was all a product of a *******-match between Adobe and Apple(recall the PDF support issues on the iPad), but from a users' perspective this is irrelevant. It's the argument that was made in the Financial Times recently about the fall of Netflix: Customers don't give a fig what your internal business priorities are, they want the products that they bought from you to work and be priced well.
(2) The very kludgy work-arounds to this issue, involving deleting or hiding PPDs in the system library (specifically inOS/Library/Printers/PPDs/contents/Resources/), suggest that what is causing the InDesign CS3.x to crash is minor in nature. I.e. a patch could easily bewritten.
(3) Adobe CS3.x applications are the first generation of "Universal" apps. Okay, maybe their implementation was not ideal (as this shows) but they were written to the rules at Apple laid out for them, rules that are still in place now. As with my first point (1) it's unfair to change the rules on Adobe after the fact.
(4) Who could expect that the step from 10.6.x 10.7.1 (the.1 presumably meaning that some initial kinks had been worked out) would be so traumatic? We are not talking here about a step from Classic or PPC. (I remember these, but because they were structural changes everyone, at some level, was prepared for the change.) This is not about getting Rosetta to work on 10.7.
(5) We are not talking about a minor set of applications here either. Considering the long-standing use of Macs by the design community, in print, production, and photo, the support of Adobe apps should have been aconsideration for Apple. But when you look at the list of issues with this upgrade (http://kb2.adobe.com/cps/905/cpsid_90508.html) it's hair-raisingly long. And note these are CS5.5 apps: the very newest software you can get from Adobe. If part of your argument is that it's incumbent on people to keep their software up-to-date, then here's a set of OS issues that are affecting users of software that was released just this spring.
(6) Even if Adobe CS5.5 was fully supported (see (5)), it's unreasonable to expect everyone to upgrade all of their software packages each time the OS is upgraded (as opposed to completely revised: again, as in (4)10.6.x was not Classic). All of my personal software is up-to date, but I cannot say the same of my clients and my employer: they hold to older computers and software packs as long as they can because the software was so expensive.CS5.5 Design Premium is $1900. For any organization this is a big chunk of cash to doll out regularly. My employer is a non-profit: should they replace their software because I have upgraded my laptop? Or should I stop upgrading my software because they can't afford to get CS5.5 (even if it was properly supported)?
      And, what if we buy a new Mac? Presumably this will come with Lion. It's clear with this that this is no longer a $4000 proposition, but a $10,000 proposition, since all the other copies of CS3.x would have to be upgraded.

Printer will not print legal paper

hp 8600
system OS X

Can you explain more on what the issue is? Do you receive an error message, do you get a paper jam or does the print just not print?
First make sure your running the most up to date software. This can be done by click the Apple at the top left of your screen. Then selecting software updates. If you have new updates go ahead and install them.
Also, what program are you tring to print from. If you could give me a little more information it would be extremely helpful in make sure I can resolve your issue. Thanks!
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

InDesign CS3 "White Box" when printing with linked Photoshop EPS files

This problem has been covered before, but never really resolved:
Robert Levine, "InDesign CS3 Erratic White Box Phenomenon with Placed Photoshop EPS files" #1, 1 Apr 2008 11:05 am
Now, I'm aware that we should no longer be using EPS files. I wholeheartedly agree. But until we can convince the department to change to another format (namely PSD or TIFF) for our vast library of images, I need a workaround.
It seems that setting the clipping path for each linked image to "Photoshop Clipping Path" resolves this issue. So I tried writing an AppleScript that would find each linked Photoshop EPS and set it's clipping path to "Photoshop clipping path", but it didn't work for me (my expertise with AppleScript is basically nil.)
Can anyone assist with the creation of this script? Or does anyone have a better suggestion for solving or working around the Photoshop EPS erratic white box printing problem?
Thanks!

>Why??????????
Because they've got zillions of EPS and have no time to resave them all and because it
b should
work even if Buko doesn't like EPS...
(Your vendetta against EPS takes on strange proportions. Were you bitten as a child by a rabid EPS and have sworn to wipe them out? Must be an interesting story behind it ;) )
Brian, this script seems to do the job with one very important caveat: I see no way of finding out which path is active in the EPS (in case that more than one). So the script simply activates the first in the list.
tell application "Adobe InDesign CS3"
set aDoc to active document
set allLinks to links of aDoc
repeat with n from 1 to (count allLinks)
set aLink to item n of allLinks
if link type of aLink is "EPS" then
   set anEPS to parent of aLink
   tell clipping path of anEPS
    set ePaths to photoshop path names
    if (count ePaths) > 0 then
     set clipping type to photoshop path
     set applied path name to item 1 of ePaths
    end if
   end tell
end if
end repeat
end tell

CS5, New IMac and Epson R2400 = terrible prints

Please can anyone help. I have a new I Mac running Mac OS X 10.6.4. I have just purchased CS5 and I have an Epson R2400. I cannot get a decent print despite spending hours trawling the internet for help and carrying out every suggestion under the sun. Please can someone help before I throw out the €3000 worth of kit that is worse than useless outside.
Yours hopefully Sue

Hi Sue
I have the same configuration as you and I am happy with the output.
What actual problems do you have. Maybe I can help.
Cheers
John
you can email me at: [email protected]

HP 6510e not printing custom paper sizes

I have recently purchased a HP Photosmart 6510e printer. I called HP Tech support from the store where I bought the printer and specifically asked if this printer would print custom paper sizes. I was told it would. I tried to print an invitation on a paper size of 5.5 X 8.5. The printer keeps giving me an paper mismatch error. The paper size shows up in the list of paper sizes, but has an exclamation Point beside it. If I click on teh paper size it changes to 8.5 X 11.
i am using a PC with Windows 7 OS.
Thanks.

Hi,
The Officejet 6510 software drivers for Windows does not have an option for custom paper sizes. I checked for the paper size (5.5x8.5) you were trying to print on and it is not an option under the paper sizes. The only option is probably to have your printer replaced with a comparable Laserjet printer. Laserjet printer have a different software package and the one I checked (Laserjet Pro M275) has a Custom option.
Here is a link to a list of Laserjet printers
http://shopping2.hp.com/en_US/home-office/-/products/Printers/HP%20LaserJet
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

What does 'filter failure' mean when my epson will not print?

I recently responded to a Software Update for my Epson Stylus TX610FW Printer. It has crashed constantly since. It will print a Nozzle Check but whenever
I attempt to print a document in any Application the printer crashes.
I have replaced Mountain Lion 10.4.8, I have attempted to find Epson v.2.6 as the Forums suggest and can find it nowhere.
Is there any other way of reverting to my previour driver?
When I try to print I get the following message in the Crash Box: rastertoescpll quit unexpectedly
I get the following error in the Print Dialogue Box: stopped - 'Filter' failed - 1 page
Jo Daniell

This has been addressed in another thread. Under system settings select sharing and enter a computer name, and exit. To be safe restart the computer and you should be able to print.

Indesign Cs3 trial period not load!

hi all, i've installed indesign cs3, at opened indesign,
appear a scren to chosen 30-days period trial or enter a valid
product number. I chooose the trial period and show a message: "a
problem was encoutered while trying to load the trial period for
Adobe InDesign."
How i fix this?

Hi there TabiszTabiszGraffo
You will probably need to contact Adobe Support for this
issue.
And, for the record, once you get it installed and running,
you should direct questions about InDesign to the proper forum.
This one is for Adobe Captivate
The InDesign forum is at the link below:
http://www.adobeforums.com/cgi-bin/webx/.3bbf275c/
Cheers... Rick

New imac with 10.6.5, epson cx7800 not printing, yes another question

Hu,
As stated, I just bought a new imac and am unable to print, getting this message:
Wednesday, December 8, 2010 5:53:06 AM America/Denver
E [08/Dec/2010:05:53:25 -0700] [Job 12] Job stopped due to filter errors; please consult the error_log file for details.
D [08/Dec/2010:05:53:25 -0700] [Job 12] The following messages were recorded from 05:53:24 to 05:53:25
D [08/Dec/2010:05:53:25 -0700] [Job 12] Job restarted by user.
D [08/Dec/2010:05:53:25 -0700] [Job 12] job-sheets=none
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[0]="Stylus_CX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[1]="12"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[2]="gregwargo"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[3]="Ginger Bars"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[4]="1"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[5]="APColorMatchingMode=APVendorColorMatching APDInputSlot= nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=Preview com.apple.print.JobInfo.PMJobName=Ginger\ Bars com.apple.print.JobInfo.PMJobOwner=Greg\ Wargo nocom.apple.print.PageToPaperMappingAllowScalingUp..b. com.apple.print.PageToPaperMappingMediaName=na-letter com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=6744 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 DestinationPrinterID=Stylus_CX7800 media=na-letter PaperInfoIsSuggested..b. noPDFIsProtected..b. pserrorhandler-requested=standard job-uuid=urn:uuid:8abaf296-ebe1-3365-70ea-70ed96a97afc job-originating-host-name=localhost time-at-creation=1291769861 time-at-processing=1291812804 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 PageSize=na-letter"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[6]="/private/var/spool/cups/d00012-001"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[0]="<CFProcessPath>"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[9]="HOME=/private/var/spool/cups/tmp"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[11]="[email protected]"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[12]="SOFTWARE=CUPS/1.4.5"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[14]="USER=root"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[17]="IPP_PORT=631"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[18]="CHARSET=utf-8"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[19]="LANG=en_US.UTF-8"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[20]="APPLE_LANGUAGE=en-US"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[21]="PPD=/private/etc/cups/ppd/Stylus_CX7800.ppd"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[22]="RIPMAXCACHE=8m"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[23]="CONTENT_TYPE=application/pdf"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[24]="DEVICE_URI=file:///dev/null"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[25]="PRINTER_INFO=Stylus CX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[26]="PRINTER_LOCATION=Degobah2"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[27]="PRINTER=Stylus_CX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[28]="CUPS_FILETYPE=document"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[29]="FINALCONTENT_TYPE=printer/StylusCX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 1566)
D [08/Dec/2010:05:53:25 -0700] [Job 12] Restarted by "gregwargo".
D [08/Dec/2010:05:53:25 -0700] [Job 12] JobManager converting file: /private/var/spool/cups/d00012-001 (7 args)
D [08/Dec/2010:05:53:25 -0700] [Job 12] PrintJobMgr trying ppc architecture...
D [08/Dec/2010:05:53:25 -0700] [Job 12] JobManager converting file: /private/var/spool/cups/d00012-001 (7 args)
D [08/Dec/2010:05:53:25 -0700] [Job 12] fatal::internal error -9660
D [08/Dec/2010:05:53:25 -0700] [Job 12] End of messages
D [08/Dec/2010:05:53:25 -0700] [Job 12] printer-state=3(idle)
D [08/Dec/2010:05:53:25 -0700] [Job 12] printer-state-message="/System/Library/Printers/Libraries/PrintJobMgr/Contents/ MacOS/PrintJobMgr failed"
D [08/Dec/2010:05:53:25 -0700] [Job 12] printer-state-reasons=none
I've uninstalled the software, reinstalled the latest drivers and software, and am still unable to print. The printer is listed as online and ready, but no printing.
any advice is greatly appreciated.
Thanks,
Greg

I have a MacBook Air 11.6" running OSX 10.6.5 and cannot print to my Canon MF4350d attached to my AirPort Express, with printer sharing selected. HAve reinstalled software over and over agin. Turned printer off, unplugged, etc. No luck. Says it cannot find the software for the printer. The computer can "see" where my printer is located, but the printer will not print. Nothing seems to wrk. Any ideas what might be going on and how I can fix it? By the way, I was able to print directly to this printer connected to my computer's USB, but now even when I do this the same problem occurs. ALL ability to print seems to be GONE. COuld it be related to the recent upgrade to OSX 10.6.5?

Crystal report printing using epson dot matrix printer (continouos paper)

Hi there, im tiff from the philippines.
i have a question on printing using a crystal report. How do i print using epson continuous printer(dot matrix)? im having a problem printing to that type of printer specially using continuous paper. the first page is correct but unfortunately the succeeding pages are not. its automatically adjusted upon reaching the second page. hope you can help me.
thanks a lot and looking forward to hear from you soon.
tiff

Check with the printer manufacturer that the matrix printer is Unicode compliant. If it is not, it will not work with Crystal Reports. If it is, make sure you have the latest printer driver updates.
Download SP 1 for CR 102 from here;
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
See the following resources re. printers;
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29
[Note #1314394|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Ludek

Lion OS and Epson printers not printing photos through Aperture or CS4

Hi everyone,
I have done a search on the above topic but nothing obvious is coming up as a solution (ie...sorry if it has been done before)
It's driving me mad.
I have 2 epson printers, R300 and Stylus 1400.
They were both performing perfectly well before installation of osx lion.
They will both print word and pages documents perfectly, they will also print from pdf and screen dump.....so they are mechanically ok, (paper loaded correctly, loads of ink etc etc ) now, here is the issue.....
When I try to print a photo from either CS4 or Aperture the information seems to send to the printer, the printer icon jumps up and down and the text for the jobs queue says 'printing'....the printer 'shunts' as if engaging to print, doesn't do anything else and tells me a second later that the status is 'completed'.....but it hasn't printed anything!!! aaaaargh
I have been to the epson website and downloaded the latest drivers....same outcome.
I have even been on the live assistance thing on the epson website, no help at all, assistant didn't seem all that competent.
Anyone have/had a similar problem.
Words of one syllable if there is a fix, I am savvy but not expert.
Cheers
Rob

Hi nenavella,
One more thing you could try, the problem re occurred for me on a different printer and I found the reason for the fault by accident, a longish story but stick with it:
I had set up an unusual custom paper size so that I could print off passport photos for a client....for reasons I don't quite understand (probably my own stupidity!) that paper size became the default size for that printer...very rarely used...so any time I tried to print anything on that printer that wasn't passport photo size...it behaved exactly like my previous issue, made all the right noises etc etc but didn't print.
To cut a long story short: On that particular printer, every time I print anything I have to go to 'Page Setup' and change it to an appropriate size (A4, 6x4, A5 etc etc...anything but UK passport size of 35mm x 45mm) before I hit the print button.
It may be worth checking that your printer hasn't somehow 'obtained' an odd page set up parameter somewhere/somehow.
If it isn't this I hope you find the problem soon, I know how infuriating it can be.
Cheers
Robin

Indesign CS3 & Epson r2400 not printing tabloid paper

Similar Messages

Maybe you are looking for