Indesign cs3 for table and figure

In Indesign cs3 for table and figure automation scripts
Tables - auto align and place near citation
Figures - place near citation with caption
Its urgent

ok, well, you may want to ask a question, rather than just stating what you need to do. also, people are helping you for free, so writing it's urgent won't get you very far.

Similar Messages

Adding Tags in PDF for Tables and Figures

Please let me know how to add tags for Table and Figure in the PDF and also about setting up attributes for that

You can add tags to a PDF Document. If the PDF is untagged you can use the advanced, accessabilty, add tags to the document. If the PDF is already tagged or after you have run the add tags you can use the "touch up reading order" menu and then make the item you want to be a table a table etc....
Be Well

Cross-references (MS-Word to WebHelp) not showing up for Tables and Figures

I am converting an MS-Word 2010 document to WebHelp using RH9. Cross-references to numbered sections, appendixes, websites, etc. come out fine. Cross-references to tables and figures do not always appear. In some sections they are there, and in some they are not.
Would anyone be able to offer any insight into how I can get these table and figure cross-references to come out on a regular basis in the WebHelp version? Thank you.

UPDATE TO PREVIOUS MESSAGE: Cross-references to tables and figures NEVER appear in the RH version when coming from MS-Word.
Is there any way to have these cross-references appear? If not, it appears the only solution is to bookmark tables and figures individually and hyperlink to each of them.
Thanks for any help you can offer.
nankinnankin

Separate table and figure numbering sequences

I need some pointers and guideance on how to setup autonumbering for tables and figures separately. As it is, the number sequence advances upon usage by a table or a figure. For example, Table 1, Figure 2, Figure 3, Table 4. What I need in that case is Table 1, Figure 1, Figure 2, Table 2.

Steve,
The easisest way is to use what's called a series indicator for you autonumber sequence. This consists of a single letter at the star of the autonumber. Typically, one could use F:<n+> for figures and T:<n+> for tables. FM will then number these streams differently. You can make things more complex in your setup (and much easier for the authors) using a numbering matrix where parent heading tags reset the lower level counters (which is what Peter was alluding to).
See:
http://www.freeframers.org/archive/99/msg00281.html
http://help.adobe.com/en_US/FrameMaker/9.0/Using/WSF176D8C8-8133-4860-88E3-AF69262623F0.ht ml
http://www.techcomplus.com/reference/autonumbering.pdf
http://www.microtype.com/resources/articles/AUTONUM_DE.PDF
http://www.infocon.com/files/autonum.pdf

Is there a way to auto-renumber tables and figures in an InCopy document?

I am looking for a script or plugin to be able to auto-renumber figures and tables in large InDesign/InCopy documents. Say if I add a new figure in between figures 4 and 5 I would like all following figures to automatically renumber and all references to those figures in the text to also auto-renumber like in a Word document. Possible? We have over 100 authors that are concerned this can't work. Need help.

The link below is to a zip file containing: 2 PDF files which are excerpts from Help (one on autonumbering and the other on cross-referencing) and a CS6 InCopy file with sample paragraphs using autonumbering for multiple list levels, tables and figures. If you have a Lynda.com account, that's perfect for quickly learning more about cross-references and autonumbering. I created the sample file quickly so I hope I put all of the elements you were trying to see in the file. If not, let me know. I have never posted a link on a forum so again, let me know if there is a problem getting the file. Hope this helps.
https://www.dropbox.com/s/7bb240bmi479t8w/ICAutonumbering.zip

Table and figure numbering in multi-chapter book

Using InDesign CC 2014 I am editing a book that consists of 23 chapters. Each chapters are added to the book separately. There are 5 levels of titles, level 1-4 is numbered (first level is the chapter title), the 5th is not.The numbering of the titles in chapters works very well, but I have problem with numbering of figures and tables.
The numbering of tables and figures should look like this: Table 1.1., 1.2., etc, Figure 1.1., 1.2., etc. The first number is always the chapter number, the second is the number of table/figure in order - within the chapter. I want the second number to re-start in each chapter. But if I select "continue from the previous number" (or something like this - I have Hungarian version, tried to translate to English), the numbering does not re-start with each new chapter, however gets the correct ^H number. If I select "start", all tables and figures will be ^H.1.
My question is: what should I do on one hand to be able to use (and sync) all formats (including tables' and figures' captions with numbers) in the whole book, in the same time making the figures' and tables' numbering having ^H followed by a number re-starts in each chapter? For this, the table and figure number should be which level on the list? What to do with "restart numbering at this level after" option?
I have searched the www from A to Z and back but could not find the answer. Please, help me! Oh, and please, write the how-to description step-by-step (maybe illustrated?), as I use Hungarian version, which makes applying the suggestions a bit difficult. Thank you, in advance, for your kind help!

Darn Framemaker and its use of phantom numbering placeholders.
But seriously thanks - worked line a champ
Bob Geib
Design & Test Engineer
Microwave Filter Components
Aeroflex Microelectronic Solutions
350 Kennedy Drive
Hauppauge, NY 11788
Direct: 631-404-3669
Cell: 526-523-1265
Email: [email protected]

What's the benefits of Indesign CC over Indesign CS3 for print design?

What's the benefits of Indesign CC over Indesign CS3 for print design? I'd like to know the advantages and features – all those I read about are to do with EPUB, collaborative working, teams or digital designs, and those don't reflect my work.

Very important is the span column paragraph property which allows to span several columns in a text frame or to split a column in several sub columns.
Very important is the tag feature, which is also important for creating PDFs with unlimited access.
A lot of problems with footnotes and page layout have been solved due to a better text engine. Up to CS5.5 it could happen that a footnote could force a page be empty when a document was opened.
With CS5 rounded frame corners which are editable were introduced.
Object Styles have been completed since CS3.
Content tools to create linked content were introduced. You need only to change the original content (text or image) and all linked content will be updated as any other link. The linked content can be in the same and in any other document.
Since CS5.5 it is much easier to anchor frames in a text flow with the little at the top of a frame symbol.

Is there a way to export data from Framemaker 7.0 to InDesign CS3 for the MAC

I am asking this question for our Advertising department so I am not too close to the situation. Another company that is part of oujr platform designed their catalogs in Framermaker 7.0. We have Framemaker 6.0. The only reason we have it is to work with this other version of Framemaker 7.0. Our advertising people use InDesign CS3 for the Mac. Right now Advertising gives the person with Framermaker 7.0 changes to be made to their catalog. He exports the file as an IMF file and she pulls it into Framermaker 6.0.
We tried to upgrade from Framemaker 6.0 to 9.0, but that wasn't possible.
Ideally we would like to take a 600 page catalog created with Framemaker and convert it to InDesign.
We would also like to take the files created with Framemaker 7.0 and import them into InDesign.
Is there a way to do this?
Thanks in advance.
dh

You can convert FrameMaker MIF (interchange) files to InDesign with the dtptools.com MIF Filter plug-in for InDesign. The plug-in is free, because you have to pay for the pages you convert. The bigger bundle of pages you buy, the lower cost per page.
dtptools.com also has a really free plug-in for FrameMaker that converts .fm files to .mif, whole directories at a time.
The converted InDesign files usually look very close to the original FM files, but it's possible to create things in FM that fools the converter, so you'll need to look the conversions over carefully.
I reviewed MIF Filter in some detail in InDesign Magazine in a late 2007 issue.
You should be aware that InDesign CS3 is no longer sold, so you can't buy more copies for all your users to be working in the same release. While it's possible to exchange files between ID CS3 and CS4 there are some things that don't convert perfectly, so you'll still have to inspect closely. I believe the most-common issue is text reflow.
It's not clear if you intend never to go back to using FrameMaker for any of the catalog work, except perhaps for creating original text.
Without seeing an example of the catalog pages, it's impossible to recommend any useful strategies. You can post a screen shot to this forum by clicking the camera icon in the button bar above the reply entry area. Inserting with the camera puts the picture on the forum very quickly, vs. attaching the picture as a file (it takes hours or days.)
There may be other strategies for creating your catalog.
HTH
Regards,
Peter Gold
KnowHow ProServices

Import dumpfile with seperate tablespaces for table and index

Hi,
We have a schema for which the its tables are stored in seperate tablespace and indexes are stored in different tablespace. Now we have take full schema export. Now we want to import it on another schema. Now I want to know if the we have difference in the tablespace name we use REMAP_TABLESPACE clause of the impdp command but what about the seperate tablespace for table and indexes. How would Oracle handle this.
Regards,
Abbasi

Hi,
I hope you created the same tablespace structure on the target side if not so remap_tablespace option you have to use for specifying different tablespaces.Oracle will take care of putting data and index.Any how if a index is moved from one tablespace to other you have to rebuild them,once you rebuild them than only stattistics are gathered otherwise you
might face some performance issue.
Better option is to keep same tablespace structures in source and target environment.
Best regards,
Rafi.
http://rafioracledba.blogspot.com
Edited by: Rafi (Oracle DBA) on May 9, 2011 7:07 AM

Alias for table and colum names?

Hi there,
is there a new to create a alias for table and colum names? If so, how can I do this?
Thanks,
Andre

I'm not sure why you want them changed. The Oracle database by default is case insensitive, which in essence means it converts everything to upper case when a case is not specified (which can be done by wrapping it in quotes). Unfortunately, Java strings are case sensitive. This means that if you try searching resultsets for "TableName" when the database driver is returning "TABLENAME", you will run into problems. It is probably better to have your project match your database as closely as possible to avoid any issues later on.
That said, I don't know of a way to automatically have the workbench use mixed case names - it uses the strings as they are returned from the database. I believe you will need to manually change the table names if you want them to be different than what you have imported.
Best Regards,
Chris

Bought InDesign CS4 for Mac and now need to move it to a PC. Help!

Bought InDesign CS4 for Mac and now need to move it to a PC. Help!

Most Adobe software is written for one of two platforms, Mac or PC. In order to switch platforms you need to be using the most current version, so CS4 would not be supported for making this switch. Here is a link to a page that explains the requirements for switching platforms....
http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

Selection groups for tables and header tables

A couple of questions or rather observations around Selection Groups for tables and conversion objectu2026
1) For tables that do not really have a date field, for instance table PDSNR, it appears that you cannot specify a selection group. Consequently, you have to transfer the table in its entirety. Is this something that can be modified via customizing?
2) And what about the header tables, for example, X_ANLC, I have tried but not able to change the selection groups on these objects.
Thanks!
Harmeet

Hi Harmeet.
Since you mention you can only filter by date I am assuming you are using TDTIM.
How would you want to filter PDSNR, for example? Would it want to filter all entries >= a given sequence number?
The only way I know to do that is to work directly with the configuration tables. In your case you will need to use CNVMBTSEL* tables. Check how the standard selection groups are configured, and it should not be too difficult to follow the same logic and create your own selection groups.
CNVMBTSELGRP                   MBT PCL Selection groups              (main table to create the selection group)
CNVMBTSELMEMTYPE               MBT PCL Selection group member types (main table to define members => fields for the selection group)
CNVMBTSELGRPDEF                MBT PCL Selection group definition    (definition of the fields in that selection group)
CNVMBTSELGRPVAL                MBT PCL Selection group values        (values for each field; you can use GE for >=)
CNVMBTSELCLAUSE                MBT PCL Selection group clause        (should also be straightforward if you are using only one field)
CNVMBTSELVAR                   MBT PCL Selection group variants     (configure the same variant for your selection group as for the others)
CNVMBTSELREF                   MBT PCL Selection group reference     (assignment of selection group to conversion object)
Hope this helps,
Rui Dantas

Table and Figure Autonumbering

I am currently using FrameMaker 8.0 and having a problem with the autonumbering of my tables and figures.
Is there a way to have these as seperate numbering but still referencing the Chapter number?
E.g. CHAPTER 1
Table 1.1
Figure 1.1
Figure 1.2
Table 1.2
CHAPTER 2
Figure 2.1
Table 2.1
Figure 2.2
Table 2.2
Thanks in advanced!
Skye

Skye,
If your chapters are separate files, then you should be using the
$chapnum variable and control that at the book level.
If all of your chapters are in a single file, then you have to define
your autonumber sequences to use the matrix method and have the
chapter number paratag reset the sub-ordinate paratag autonumbers.
This is explained in the "Using multiple counters in an autonumber
format" section of the Help file.
The first method is the easiest to use and maintain.

I have a CS3 for windows and I switched to a mac. Can I get a mac version without having to pay for the suite again

I have a CS3 for windows and I switched to a mac. Can I get a mac version without having to pay for the suite again?

No.
Adobe only offers a Platform Swap on current software: Order product | Platform, language swap
CS3 is also too old to have an "upgrade path" and is no longer sold or supported by Adobe.
You do, as a CS3 owner, qualify for a 40% discount on your first year of a Creative Cloud Subscription though: Creative Cloud pricing and membership plans | Adobe Creative Cloud
If you don't want to go with the subscription service, Adobe does still offer CS6 (4 versions away from current & no longer receiving updates) as a "one time payment/download" perpetual license: Creative Suite 6

Good source for tables and reports

Hello!
Does any one know a good source for tables and reports in SRM (EBP) I really
looking to report on the Org Structure.
But any information you can give me would be really helpful.
Regards
sas

Hi,
See these threads :
SRM Tables
SRM Tables
Re: Availability of Standard Reports in SRM
SRM standard reports?
SRM Reports
For developing custom reports,you can use the stanadard tables and Function modules.
BR,
Disha.

Indesign cs3 for table and figure

Similar Messages

Maybe you are looking for