[InDesign CS3] how to find the reason of the memory leaks?

Hi all,
I'm working with InDesign CS3. I wrote a plug-in and loaded it into InDesign in debug mode. After I closed the application, I got a console window showing memory leaks as following:
Leaks! 52 leaks, 716804 bytes
Press any key to continue . . .
Does anybody know how to find the reason of the memory leaks? Thanks a lot!
Nicole

Thanks Dave. I'm using Windows, and I also tried MemoryTracker. I got a Leaks.txt which shows the detail of memory leaks as following. But I really can't understand it. Any help? Thanks.<br /><br />Leaks!  7 leaks, 455252 bytes<br /><br />65036 bytes at: 7B22FF8<br />     4172627C     MemoryPool::GetNonPoolSizePeak cannot be found in any module!<br />     00EDC1CB     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     01C9C74F     cannot find address in any module!<br />     01C96DEC     BIBGetVersion cannot be found in any module!<br />     01C96E60     BIBGetVersion cannot be found in any module!<br />     01C979E4     cannot find address in any module!<br />     0131F511     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     0131F4C4     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     00EDBC7E     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     00EDBFBE     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     00EDC558     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     1002C26E     cannot find address in any module!<br />     1002BFB9     cannot find address in any module!<br />     00401644     cannot find address in any module!<br />     00405146     cannot find address in any module!<br />     00404EBD     cannot find address in any module!<br />     7C817067     RegisterWaitForInputIdle cannot be found in any module!<br />65036 bytes at: 7B32E38<br />     4172627C     MemoryPool::GetNonPoolSizePeak cannot be found in any module!<br />     00EDC1CB     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     01C9C74F     cannot find address in any module!<br />     01C96DEC     BIBGetVersion cannot be found in any module!<br />     01BB149B     cannot find address in any module!<br />     01BB4C62     cannot find address in any module!<br />     00EDBCE3     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     00EDBFBE     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     00EDC558     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     1002C26E     cannot find address in any module!<br />     1002BFB9     cannot find address in any module!<br />     00401644     cannot find address in any module!<br />     00405146     cannot find address in any module!<br />     00404EBD     cannot find address in any module!<br />     7C817067     RegisterWaitForInputIdle cannot be found in any module!<br />65036 bytes at: 7B52AB8<br />     4172627C     MemoryPool::GetNonPoolSizePeak cannot be found in any module!<br />     00EDC1CB     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     01C9C74F     cannot find address in any module!<br />     01C96DEC     BIBGetVersion cannot be found in any module!<br />     02331A7A     cannot find address in any module!<br />     0236E7CD     cannot find address in any module!<br />     43726F6C     cannot find address in any module!<br />65036 bytes at: 7C93D80<br />     4172627C     MemoryPool::GetNonPoolSizePeak cannot be found in any module!<br />     00EDC1CB     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     01C9C74F     cannot find address in any module!<br />     02331F36     cannot find address in any module!<br />     02367F85     cannot find address in any module!<br />     02415DB4     cannot find address in any module!<br />     3F800000     cannot find address in any module!<br />     02416799     cannot find address in any module!<br />     FFFFFF11     cannot find address in any module!<br />65036 bytes at: 7CD6028<br />     4172627C     MemoryPool::GetNonPoolSizePeak cannot be found in any module!<br />     00EDC1CB     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     01C9C74F     cannot find address in any module!<br />     01CE1C14     cannot find address in any module!<br />     01DD9346     CTGetVersion cannot be found in any module!<br />     01D9B052     CTGetVersion cannot be found in any module!<br />     01D9B189     CTGetVersion cannot be found in any module!<br />     01D9BB21     CTGetVersion cannot be found in any module!<br />     01D9BD0C     CTGetVersion cannot be found in any module!<br />     01D9CE96     CTGetVersion cannot be found in any module!<br />     01D9CEFF     CTGetVersion cannot be found in any module!<br />     01DDBEA2     CTGetVersion cannot be found in any module!<br />     01DDC214     CTGetVersion cannot be found in any module!<br />     01DDC7C6     CTGetVersion cannot be found in any module!<br />65036 bytes at: 16D68200<br />     4172627C     MemoryPool::GetNonPoolSizePeak cannot be found in any module!<br />     00EDC1CB     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     01C9C74F     cannot find address in any module!<br />     01BB178C     cannot find address in any module!<br />     01BCE7C8     cannot find address in any module!<br />     01BCEE13     cannot find address in any module!<br />     01BD28C5     cannot find address in any module!<br />     01BD4CB7     cannot find address in any module!<br />65036 bytes at: 20B68F88<br />     4172627C     MemoryPool::GetNonPoolSizePeak cannot be found in any module!<br />     00EDC1CB     K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module!<br />     01C9C74F     cannot find address in any module!<br />     01CE1C14     cannot find address in any module!<br />     01D2F1A1     cannot find address in any module!<br />     01D6F789     CTGetVersion cannot be found in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!<br />     07BFB464     cannot find address in any module!

Similar Messages

  • How to find workarea ID for the work area name.

    Hi Experts..
    How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
    Points would be rewarded for helpful answers..
    Thanks
    Kunal Halarnakar

    U want to fetch the workarea description ?
    we can fetch it from CCIHT_WALD table with the RECN value.
    The informations are stored in AUSP table with the characterstic(ATINN) value.

  • Can anybody help me in finding the reasons why the time of email received are different from the one on my macbook which time is correct

    Hi
    Can anyone help me in finding the reason why the date on e=mail reced is different from the one on my MacBook eventhough it is correct
    Thanks

    Try this...
    Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
    cmd /k netsh winsock reset
    Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
    You should get something similar to this:
    Reboot the computer and the problem should be resolved.
    If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
    tt2

  • How to find out what are the functions supported by string class

    Hi,
    Can any one let me know how to find what are all the functions supported by the string class in standard(STL) library on solaris.
    Regards,
    Vignesh

    1. Any C++ textbook that covers the Standard Library will tell you about the standard string class. A good tutorial and reference for the entire Standard Library is "The C++ Standard Library" by Nicolai Josuttis, published by Addison Wesley.
    2. WIth Sun C++, the command
    man -s3C++ basic_string
    provides documentation for the default libCstd version of the Standard Library.
    3. You could look at the <string> header itself. I don't recommend that approach.

  • How to find out  Locks on the database objects

    how to find out Locks on the database objects

    The following notes should be helpful:
    Note: 200590.1 - bde_session_locks.sql - Locks for given Session ID
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200590.1
    Note: 1039273.6 - SCRIPT: VIEWING LOCKS ON OBJECTS HELD BY SPECIFIC USER
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=1039273.6
    You can also search Metalink, there are many notes/scripts published there which would be also helpful.

  • How to find out what is the lock key for the computer

    How to find out what is the lock key for the computer?

    You don't.
    If you forgot or lost the password, all you can practically do is reset it.
    The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
    On Lion, you use the following technique to reset the Administrators password:
    Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
    Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
    In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

  • How to find latest entry in the table according to time

    how to find latest entry in the table according to the time
    is there any function module to do so
    \[removed by moderator\]
    Regards
    Shashi
    Edited by: Jan Stallkamp on Aug 25, 2008 4:39 PM

    Hi,
    If you want to read the entry from an internal table,
    sort the internal table in the descending order by the time and
    delete adjacent duplicates by comparing the fields other than time and the internal table will have the latest record.
    Suggestion: instead of only time try to have one more field called date with the time combination
    Regards,
    Ramesh

  • How to find what are all the rules and events are monitoring for specific server in SCOM 2007

    how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
    I need to know what are all the events, services, and rules are monitored for the specific server.
    Kindly help me friends.

    how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
    I need to know what are all the events, services, and rules are monitored for the specific server.
    Kindly help me friends.
    Thanks for the question Sandoss. This is something that we all come across at sometime.
    Thanks & regards, Sumit Agrawal
    The lack of this feature is an inexcusable oversight for an enterprise management product.  They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down. 
    BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server. 
    The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well.  I'd like some feedback if something is missing.
    DECLARE @srv varchar(30)
    SET @srv = 'your name here'
    SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
    case
        when s.HealthState = 1 then 'healthy'
        when s.HealthState = 2 then 'Warning'
        when s.HealthState = 3 then 'Critical'
        else 'N/A'
    end as Health
    FROM state AS s WITH (NOLOCK)
    left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
    left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
    where
    bme.FullName like '%' + @srv + '%'
    and s.HealthState <> 0
    and mon.IsInternalRollupMonitor = 0
    and mon.IsExternalRollupMonitor = 0
    order by bme.DisplayName, mon.displayName

  • I downloaded lion but lost the setup assistant.  please help me recover the setup assistance.  i do not know where/how to find/enter information in the terminal.

    i downloaded lion but lost the setup assistant.  please help me recover the setup assistant.  i do not know where/how to find/enter information in the terminal as was suggested.

    Launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.   Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    sudo rm /var/db/.AppleSetupDone
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. Confirm.
    Reboot. The Setup Assistant will launch.

  • How to find which instance in the RAC cluster the application is connected

    How to find which instance in the RAC cluster the application is connected to ?
    Raees

    well if you know the user through which your application is connected to instance, you can easily find out by querying gv$session view.
    select inst_id,sid,serial#,program,username from gv$session where username is not null;
    Thanks
    Gaurav

  • How to find Related Tables for the Tcode given.

    How to find Related Tables for the Tcode given. (master data)
    Thanks in advance.

    Hi Sridhar,
    Welcome to SDN.
    The tables for a given transaction can be seen in the transaction SE80.
    First goto SE93.
    Give ur Tcode and find the program name.
    Now goto SE80. select program in the first dropdown and give the program name in the second box. U can find the list of tables used.
    One more way is : use ST05.
    and One more is using FM 'get_tables'
    Thanks,
    Shailaja
    Edited by: Shailaja on Jul 11, 2008 12:33 PM

  • HT1529 how to find my iphone with the serial number

    hi
    could you please tell how to find my iphone with the serial number ?

    Sorry, there is no way to do that.
    What To Do If Your iDevice or Computer Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Mac Computer
           Find My Mac can be used from Find My Phone at iCloud.com and via Find
           My Phone on your iDevice.
          The following is third-party anti-theft software:
               1.  STEM 2.1
               2.  MacPhoneHome 3.5
               3.  MacTrack 7.5.0
               4.  VUWER 1.7
               5.  Sneaky Bastar* 0.2.0
               6.  Undercover 5.1.1
               7.  LoJack for Laptops
               8. Hidden 2.0

  • How to find referenced photos within the Photos app

    Problem:
    Upon instructing Photos to use iCloud Photo Library, the app informed me:
    "104 referenced files in your library will not upload to iCloud Photo Library. Select referenced files in your library and choose 'Consolidate' from the File menu to copy the original files into the library."
    I do not know which 104 images in my library are referenced, and therefore cannot use "Consolidate" to import the masters into the library.
    Can anyone tell me how to find referenced files, within the active library in the Photos app?
    I am not asking how to use the "Show Referenced File in Finder" menu command. I need to identify a file as referenced first, hence this post!

    Gotcha - came up with a workaround... since the photos were living in the Photo Library packaged itself, and not simply in another regular folder, I right clicked on the library and said show packaged content, then search for what folders the files lived in, then copied the files out of the packaged library into a folder. Then I was able to give the Photos Library access to the new folder with the files.
    With all my files now references, I enabled iCloud Photo Library and am uploading now.
    Hopefully my new local Photo Library will be smart enough to optimize local images and shrink to give me more space.
    Thanks.

  • How to find who has created the determination records for packaging instruc

    how to find who has created the determination records for packaging instructions in POF1.
    need to find the user details from POF3.
    can any one plz suggets me.

    Sunny,
    Go to POF1 click on determined record -> Display -.> enter-> F8 then -> double click on the record for which you want to see the responsible person ->click on admin. data tab here u will find the responsible person. hope u got the right answer.
    Ravi Thapliyal
    IdhaSoft

  • I've find the reason that the ear pods don't work.

    Dear Sir,
    I've find the reason that the ear pods no sound or sound small.
    It's the mesh guard hole are too small that the earwax fix the small hole will make ear pods no sound.
    Regards!
    Charles Young

    Have a look here Stimrep, to get an overall idea:
    http://www.youtube.com/watch?v=xYba6E7Oeu0&feature=share&list=PLpJ7oPngMm-XnTvAw vABpVdKdfzpVthcJ
    Also try a little reading in the manual. After that we're ready to help and you will be able to follow our advice.
    Cheers!

Maybe you are looking for

  • Fixed Exchange rate in PO

    Hi, The requirement is to update Exchange rate as Fixed at PO. But this should apply for only the selected Company code. Hope this is not possible by std. Any Exits in line with this requirement can be applied. Rgds, Shrenu

  • Minidisplayport-in

    Hi guys I have the new iMac as well as the new macbook pro. I'd like to use my iMac as monitor for the macbook once in a while, but to my disappointment the minidisplayport cannot be used as input, only as output. I'm thinking the graphics card in th

  • XI in SRM, CRM, MDM

    Hello. I am trying to clarify when a customer must buy XI (3.0) as a central HUB. I understand that SAP is building integration scenarios and mappings in XI 3.0 so companies may want this. I also undertand that SRM and CRM come with its own Integrati

  • Where do configure Application server Home.

    Hi All, I am getting below exception while deploying rar file <18-Jun-2009 9:21:43 o'clock AM EDT> <Warning> <Connector> <BEA-190032> << jca/SnmpConnectionFactory > ResourceAllocationException thrown by resource adapter on call to ManagedConnectionFa

  • When I type an entry in the Google box in the navigation toolbar and then hit enter or click on the magnifying glass, nothing happens - how can I fix that?

    The Google search box was working correctly, then just seemed to stop of its own accord, mid-session.