InDesign CS3 will not open for second user

I am running InDesing CS3 on a iMac 10.4.11. InDesign, Photoshop and Illustrator all open for my admistrative user account. I recently created a second user account that is unable to open InDesign even though Photoshop and Illustrator open just fine. I checked the permissions for all three programs and it appears that they are all set exactly the same. Does anyone have any idea why I am only able open InDesign for my user account but not for this new user account.
~Thank You
Andrew

5.0.3 should not have installed after 5.0.4 (that's a problem with the installer), and it may have added problems. First things to try, though, before we get down to uninstalling and reinstalling again, are trashing the prefs (Replace Your Preferences), trying a new user account, and starting with extensions disabled (hold down the Shift key when you boot).
If it comes to reinstalling again, you should probably also run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) before reinstalling, and make sure you have the correct update which you can download again from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4029

Similar Messages

InDesign CS3 will not open

WinXPsp3 - Dell GX620 1 GB Ram - InDesign CS3 v5.0.4
Welcome window - starting up, executing, Initializing, Completing
Then Error window
Adobe InDesign CS3: InDesign.exe - Bad Image
The application or DLL C:\Program Files\Adobe\Adobe InDesign CS3\Plug-ins\DICTIONARIES\LILO\LILO.APLN is not a valid Windows image. Please check this against your installation diskette.
CS3 has worked for 2 years so why and how to fix.
Thankyou J.

I did a system restore on my system (Windows XP Pro) and cannot open Indesign CS3. When I tried the following error message appeared:
"The licensing subsystem has failed catastrophically. You must reinstall or call customer support."
I tried some of the suggestions here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402004
Indesign CS3 will not open so I cannot deactivate. The instructions say if you have an entire Suite installed, then you only need to deactivate from one application. But I cannot find deactivate anywhere in the other apps. Without deactivating, I cannot uninstall to reinstall.
There was no FLEXnet Licensing Service showing in services.
I tried renaming the FlexNet folder.
tried moving the cache.db file.
After trying these suggestions I now get the error:
"You cannot use this product at this time. You must repair the problem by uninstalling and then reinstall this product or contact Adobe customer support for help."
What next?

InDesign CS3 will not open after installing updates

Hello,
I am having a problem printing borderless with InDesign CS3. When my paper size is set on borderless my photos print very light. If Iremove the borderless setting the photos print fine.
In a effort to correct this problem I downloaded and installed updates for InDesign CS3 now InDesign will not open.

5.0.3 should not have installed after 5.0.4 (that's a problem with the installer), and it may have added problems. First things to try, though, before we get down to uninstalling and reinstalling again, are trashing the prefs (Replace Your Preferences), trying a new user account, and starting with extensions disabled (hold down the Shift key when you boot).
If it comes to reinstalling again, you should probably also run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) before reinstalling, and make sure you have the correct update which you can download again from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4029

InDesign CS3 will not open double-clicked files on server (10.5)

I've got an odd one here. I have two new 10.6 machines running InDesign CS3, and a simple file server running 10.5.6.
When we open an InDesign file on the server using the "File Open" dialog box, the files open fine. If we navigate to a folder on server from the Finder and try to double-click on the file, it will launch ID if not open, but not open the file. It looks like it would open, but does not.
Does anyone have an idea why this might be happening? It would sure be easier for the kids to open files that way.
Dave Riedle

I have this issue also. InDesign [CS4] begins to start up, the "initializing..." label appears, then it immediately quits. Started after I had to revert back to 10.7.3 from 10.7.4 due to frequent and incessant kernel panics in 7.4. I tried uninstalling all CS4 apps (using the CS4 uninstall tool), then ran Adobe Cleaner Tool, then did a clean install of CS4 (Design Premium), including a fresh input of the serial number. All other CS4 apps open normally.
Interestingly, upon your suggestion, I created a new user account, then tried to open InDesign there. It opened normally, so at least I can use it in the "Test Account" I created. Any suggestions on how to get it to work in my account?
iMac [early 2009], 8 GB RAM, 2.66 GHz, 1.5T hard drive (third party).

Firefox will not open for other users on a shared computer with individual accounts one day after installing Firefox

On a computer that is shared with multiple users(3),two of the users cannot open Firefox,only one user can. It shows the blue circle (Windows 7) but it disappears and does not open. Task Manager shows its running,but after closing,it won't open. Are there settings to adjust in Windows,or on Internet Options?
I am running Windows 7 Ultimate with SP1 installed.

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Acrobat 9 Pro will not open for certain users - Not UNC path error

Hello, I have recently installed Acrobat 9 Pro and It runs fine in an alternate account on my machine. When I go to run it on the primary account, It immediately throws an error. I have checked the registry and the account in question does not have its app data on a UNC path. Thank you in advance for your assistance.
Nick

This is a user forum, but with Adobe you might find better help here than in other places anyway. Many of the users here have been through most of the problems and if you hit one that has been there you will likely get a good answer. Some of the folks are good at making suggestions to try (as they would try) and others will try to replicate the problem if you give enough info. Many of us are a bit crazy for spending so much time here, but we learn along with helping, an aspect we enjoy - takes the edge off the day! (OK, maybe I am speaking for myself.)
If you run into some other specifics that may help others provide you ideas to try, do come back. If you find a solution to your problem, please report it also. Bill

Workflow will not run for second user.

I've created a workflow that simply resizes photos and all works fine until I log in as the other user try to run it and it stops saying check properties. I imagine this is some kind of permission issue but I've made sure there is access to the directory where the files will write to and added read/write to the app itself and still nothing. Any ideas?? Cheers

Just to clarify, I created the workflow with User A, logged in as User B using photos that I had uploaded with User B so it already has read/write permissions. I've copied files to the target directory to make sure that works, and it does. Seems like it's all in place, but obviously somethings amiss!

I am using Windows XP pro with 2 desk top users. Mozilla will not open for other user. in English

I checked for missing shortcuts and it didn't help

Well, it turns out it was all due to this file:
~/Library/Cahes/com.apple.audiounits.cache
Once I deleted that, FCP X launched fine. Thanks for pointing me in the right direction.

Photoshop CC with CS3 will not open Nikon NEF files for the D610.[was:CC]

Photoshop CC with CS3 will not open Nikon NEF files for the D610. Is there a fix for this? Fast Eddy

I assume you're running Photoshop CC (not sure what you mean by "with CS3" unless that's the version you upgraded to CC from)
Download Camera Raw 8.3RC
http://labs.adobe.com/technologies/cameraraw8-3-cc/?tabID=details#tabTop

Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.

Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.

First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Adobe Premiere CS3 will not open!

Adobe premiere CS3 will not open. When I click on the Adobe icon on my desktop, I get this message: This application has failed to start because prm.dll was not found. I've tried several things such as: uninstalling the program then reinstalliing it. I tried to open Adobe by clicking on one of my projects by opening MY Computer from start on the taskbar, then click on c drive, etc. but it will not open. Before I started getting the error message stated above, when I clicked on the icon, the program would load to the point of showing the top portion of the page (file, edit, etc.) then stop. It would never fully load. HELP!!!!! I'm in the middle of trying to meet several deadlines.

First, search your system for every instance of prm.dll. See if you have one (could be corrupt, but a Repair Install should have repaired it) in your PrPro CS3 folder hierarchy. Do you have any more? How do the dates and sizes compare to the one, if there is one, in PrPro? Here is a LINK to a .dll site. I do not know this site, so cannot even comment on their .dll's. I'd do the first suggestion, well - first.
Also, I do not know this .dll. It could be a VST from an Audio editing program, or similar. Some of these have been known to bring PrPro to its knees, at launch. Might be worthwhile to check into it a bit more.
Also, take a look at Event Viewer. This ARTICLE will give you some tips on what to look for. Could be more happening, than the error message might lead one to believe.
Good luck,
Hunt

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

You're welcome.
But, no, don't look to Epson for fixes to their driver in newer versions, and Adobe has deprecated the TWAIN plug-in. Hoping for a solution there is futile. That has not happened and it's never going to happen. The consensus is that it's pretty foolish to tie up Photoshop to scan. Honestly.
Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever. When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software. If you think about it, its most inefficient.
VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist. VueScan is not free, but it's a pretty good value, IMO.
As for the Epson CD printing software, I have no clue. Sorry.

My InDesign file will not open! URGENT!

Hi all,
One of my InDesign files will not open, when I attempt to open it, I get a message saying "Cannot open file, Adobe may not support the file format, a plug-in that supports the format may be missing or the file may be open in another application." I'm not exactly sure what the issue is as I opened another one of my files previously and that one is still working fine. I'm using Windows 7, if anyone can help me I would really appreciate it.

Right-click the file and choose Open With, then notepad, and post a screen capture of the first dozen or so lines of text.
You can embed an image in a post using the coamra icon onthe web page, like this:

The sub menus in will not open for my tools in Adobe Illustrator CS6

the sub menus will not open for my tools in adobe illustrator CS6 and I have the "show tool tips" box marked

Click and hold. Or Click-hold and immediately move to the right.

Is the itunes store down? It will not open for me. I go to the "itunes" tab once i'm in my library, and it says "accessing itunes store" but nothing happens.

It will not open for me. I go to the "itunes" tab once i'm in my library, and it says "accessing itunes store" but nothing happens.

I just tried it and it works for me.
Allan

InDesign CS3 will not open for second user

Similar Messages

Maybe you are looking for