InDesign CS4 fails to bold (CMD-B) a specific font

I have the following fonts installed (.OTF):
Kepler Light Semicondensed Caption
Kepler Bold Semicondensed Caption
Kepler Light Italic Semicondensed Caption
They all show as available and work if selected from the menu. CS4 properly switches between the italics and non-italics using CMD-I, but for some reason CMD-B doesn't work.
Any ideas out there?
Thanks!
—m

Indesign is not to blame for that, some fonts have different hierarchy such as Frutiger and you cannot make some bold or italic just by using a shortcut, but choose the right weight instead. When this happens I use a character stylesheet and create a shortcut (I usually use Command+Opt+Shift+num2)

Similar Messages

InDesign CS4 fails to open PageMaker 6.5 files correctly

After upgrading to InDesign CS4 this week, I attempted to open a PageMaker 6.5 file. It opened, but the pages were out of sequence. PageMaker 6.5 pages 1, 2, 3, 4, 5, etc., opened in InDesign CS4 as pages 1, 3, 2, 5, 4, etc.
I purchased InDesign CS4 last week for the sole purpose of working on two books I created in PageMaker 6.5. For me, at present InDesign CS4 is useless. I hope Adobe provides a fix soon.
Also the upgrade rejected my PageMaker 6.5 serial number, I tried all the fixes at the Adobe website, finally after half an hour on the phone I was given a challenge/response code which then launched InDesign. If I need to reinstall InDesign, I'll have to go through the challenge response process again, i.e. another long wait on the support line.
I'm using OS 10.5.5 on the newest, unibody PowerBook Pro.

From the help files:
Flow text semi-automatically
With a loaded text icon, Alt-click (Windows) or Option-click (Mac OS) a page or frame.
The text flows one column at a time, as in manual flow, but the loaded text icon automatically reloads after each column is placed.
Flow text automatically
With the loaded text icon displayed, hold down Shift as you do one of the following:
Click the loaded text icon in a column to create a frame the width of that column. InDesign creates new text frames and new document pages until all text is added to the document.
Click inside a text frame that is based on a master text frame. The text autoflows into the document page frame and generates new pages as needed, using the master frames attributes. (See About masters, stacking order, and layers.)
Flow text automatically without adding pages
With a loaded text icon, hold down Shift+Alt (Windows) or Shift+Option (Mac OS).

InDesign CS4 fails to initialize page on Postscript RIP

Just upgraded to CS4 Design premium and tried printing to our RIP which is running on WindowsNT. Never had any problems with CS3. Now the RIP comes up with the message 'Offending Command: initializepage'. when printing from InDesign. Have printed from Acrobat 9 without any problems.
Running iMac 3.06ghz Duo Core Intel with OSX 10.5.
Any suggestions anybody.

InDesign can often send more complex postscript than the other apps, it is after all, dealing with a lot more types of information all at the same time. The problem comes in when ID invokes a part of the Postscript standard that hasn't been properly implemented in the RIP.
As you've seen, a workaround that commonly is successful is to export, or even print, to PDF, and sned tot he RIP from Acrobat.
Peter

Does Indesign CS4 recognize missing fonts in links?

Could anyone tell me if Indesign CS4 (or any version of Indesign) will recognize missing fonts used in a linked image? We have a customer that is using Indesign CS4 they have linked images from photoshop (no fonts in the photoshop images) and .eps files that were created using Easy Barcode Creator. Indesign is not seeing that the font is missing from the eps file (easy barcode reader), nor is there an error when exporting a PDF or print a PS. Preflight in Indesign doesn't detect this either. If I open the eps in Illustrator then I get a font missing error. I don't want to open all the files (supporting links) to find out if I have missing fonts. Any suggestions would be appreciated. Thanks

I've been playing with this a little, and I get what you see, too with .eps files. Find font will list the fonts used in the links, but for the most part woen't tell you if they are missing (seems to know they're missing in placed .indd files, though). Not a whole lot of help, but at least it puts the list out front where you can see the fonts, and check to see what doesn't look familiar.
Maybe the scripting guys have some clever ideas.

Cannot open any inDesign CS4 files, "import failed"

Suddenly inDesign CS4 will no longer open anything. When I attempt to open inDesign files it says "import failed". I have trashed my preferences and tried checking "show import options" to no avail. I can create a new document but not open documents. I am on a 2007 iMac running Lion. Any ideas?
Thank you.

Maybe. Trash your prefs again using the directions at Replace Your Preferences and then delete the additional files joun listed at Adobe Forums: InDesign crashes at startup

Indesign CS4 OSX crash, usually when opening

Hi,
I'm running with latest osx and Indesign patches (clean install), but this happening 3-4 times per hour: com.apple.launchd.peruser.503[133] ([0x0-0x5f05f].com.adobe.InDesign[1851]): Job appears to have crashed: Bus error
I uploaded one crash report:
http://pastebin.com/CYuf7rWi
(I found a related know bug in 6.0.6 update release notes
"Known issues include the following:
Users are unable to hide InDesign CS4 using the cmd+h keyboard shortcut.
InDesign CS4 may unexpectedly quit when using the Place, Save, Save As or Export commands using either the OS or Adobe dialog boxes.
To address these issues, download Mac OS X Leopard v10.5.6 or later from Apple’s web site."
but i have 10.6.8.)
Thanks for your help!
Message was edited by: szogi

Sorry, been letting things slip by...
That said, I have no idea why it's crashing, perhaps John will...
Well, this one is weird. If there wans't any narrative, I would have thought that the eyedropper tool was being clicked (LButtonUp in frame 14) and then it was failing somehow related to reading/writing attributes from the eyedropper.
It doesn't sound like that's what you're doing.
CS4 is getting kind of old, you might think about upgrading. Or at least trying with the free trial to see if CS5.5 works better for you?
Sorry I dont have anything better right now...

MS Word can see these fonts, so why can't InDesign CS4?

I produce an annual brochure and have just opened last year's INDD file in InDesign CS4 on my Windows XP PC, intending to use this as the basis for this year's brochure. The document was created using InDesign CS2 and had no font issues when last used. However, I am now being told by InDesign CS4 that the following three fonts are missing,
Arial Narrow
Arial Narrow Bold Italic
Arial Black
When I try to search for Arial Narrow via the Find Font dialogue box, it is nowhere to be seen in the list of available fonts. I can find Arial Black in the list but it only appears to be available in italic style, which is not used in my document. Other apps on my PC, such as MS Office, have no problem in finding these common fonts in all the usual styles. They are also listed in Windows Control Panel/Fonts.
How do I fix this irritating problem?

Bob,
I spent a bit more time reading your link and all the associated comments. Unfortunately, different people appear to have adopted different solutions and there is a general lack of clarity. There were three sources of confusion for my simple mind.
Firstly, the referenced Microsoft Hotfix 956514 does not support your assertion that it is incompatible with XP SP3 so I went ahead and installed this hotfix. The result was that my previous Arial Narrow font files were updated from version 2.37 to 2.40 (as viewed via Control Panel/Fonts). I also deleted all the Adobe font cache files and rebooted my PC. This resolved my problem with Arial Narrow (though my first attempt failed as I think I must have missed one of the Adobe font cache files). All the previous style variants of Arial Narrow are now available under Arial. That problem is now resolved.
The second source of confusion was that the hotfix description claims to fix an Arial Narrow problem with Office 2007. It does not make any reference to Adobe application problems. This was puzzling as I never had any problem with accessing these fonts within Word 2007. However, I guess that the subfamily name confusion was at the root of Adobe's problems and had little or no visible effect on the Office apps.
Thirdly, you recommended a hotfix that updates the font files to the latest level and yet some of those who have commented on your web page have fixed the problem by installing old versions of the font files (including the version I was originally using). Not everyone is singing from the same hymn sheet.
Anyway, I got there in the end and many thanks for pointing me in the right direction .
This leaves me with one remaining problem. My CS2 InDesign doc uses an italic version of Arial Black, which exists on my PC as a TrueType font version 1.00 dated 1996. This no longer accessible via InDesign CS4, which allows me to select Arial Black either under its own name or as a style variant of Arial but only offers the regular style in each case. Any ideas on how to fix this?
David

New problem printing from InDesign CS4 in Lion

After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
"Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
Any help would be greatly appreciated!

mmsteer,
I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
Remove the Adobe PDF PPDs from the following folders:
OS/Library/Printers/PPDs/contents/Resources/en.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
Be sure to go to your system Library, not your user Library.
Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.

Missing fonts in InDesign CS4 - even when 'open' in Suitcase Fusion 3

Hi all, I'm running InDesign CS4 on a Intel Mac Pro (tower), about 4 years old, running OSX Snow Leopard (all updates applied).
Using Suitcase Fusion V3 for font management.
I have a document that previously had no font issues at all. Now when I open it InDesign throws up a 'Missing font' error.
I have the correct fonts installed and 'open' in Suitcase Fusion.
The font is available in Simpletext and Pages, but not InDesign and Illustrator.
The troublesome font was OK the other day and has been since it was installed.
I've not changed anything that I'm aware of... but now InDesign won't 'see' the font.
In the 'Find Font' dialogue box the 'Path' says it's 'Unkown or missing'.
InDesign can see the other weights in the font family (bold, italic etc) but not regular. And yet the entire font family is in the same folder on my hard drive.
I've tried deleting all the' Adobe.lst' files. No Joy.
I've run Font Doctor on the whole font family, its says it's OK.
I've tried re-installing the font from a back-up. Nada.
If anyone has any suggestions..... feel free to let rip!
As ever, I await your expertise and unstinting knowledge in these matters And, needless to say, I'll be mighty appreciative for it!
RP

Hi Bob, strangely... I've put the troublesome font, Dax (T1) Regular, in the Applications/Adobe InDesign CS4/Fonts folder and it seems to be working.
Never had to do that before.
Would be great to get back to 'normal'. If possible.
Although I have many duplicates spread across back-up drives and collected artwork folders, I've also tried to eliminate any duplicate 'open' versions. But the above solution is the only one that works at the moment.
RP
p.s. I also tried removing any AdobeFNT**.lst files, (where ** is a number) before the above work around. That didn't work either.

My copy of Adobe InDesign cs4 will not open a regular idml file.

I opened my document, and all it said was "cannot open the file "Tightsketch_charrette2.idml". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application" I tried opening other idmls that I knew were not corrupted and I recieved the same message. I checked the plugins, they are all enabled. I quit all other programs, no luck. I restarted the macbook, no luck again. Could I recieve some help? My Indesign cs4 is fully updated and Im having all these problems.

I have good news, and bad news.
The good news is that the file opens correctly here in both CS5.5 and CS4. The bad news is that means there's a problem with your CS4.
I would start out by trashing your preferences. It's fast, easy to do, and not overly destructive, and if you are lucky it will even solve the problem, but I wouldn't put the odds of success at more than 50/50. See Replace Your Preferences
Do you have a Time Machine backup? If you do, the next thing I would try is restoring the InDesign application folder from a time before the problem started.
If all else fails, it's probably time to bite the bullet and break out the installer. First try running a "repair" install on top of what's there. If that, too, fails, then I would uninstall CS4, run the CS5 clean tool (which can also clean up CS4 -- see Resolve installation problems with CS5 Cleaner Tool), then restart the computer and reinstall. If you have any customized stuff you should make copies of things like shorcut sets and workspaces that you can put back as explained in the thread on resetting the prefs.

I am not able to open, compile and build sample plugin projects from Indesign CS4 SDK

Hi,
I am new to Indesign plugin development.
I have downloaded Indesign CS4 SDK Products version for Windows.
I have downloaded Adobe Indesign CS4 trial version.
I have Microsoft Visual C++ 6.0 . I want to build sample SDK examples given
in SDK. But when I open them from visual c++ /prj folder the project is not
getting opened.
I want to load Dollyxs and build it and using that develop some projects.
Also want to build and run the SDK examples .
So can anybody help about what software I need n which version of visul c++
is needed for this.And how to Install
them.
Thanks n Regards,
Ravi Sharma

Hi,
Thank u very much for your response.
Now I am getting error as :Error spawning cmd.exe. while I am building project (Indesign cs4-Windows).
I have set properties for .fr and .rc files .Am I missing any other setting to be made.
Can u help me?
Regards,
Ravi Sharma

Can't open .pmd file in Mac Indesign CS4

I am using Indesign CS4 in Mac OS X 10.6.2. I have done all the latest updates to Indesign.
I was trying to open and old .pmd Page Maker file that was created in a Windows version of Page Maker. I am not sure what version they were saved in. The file was created in July of 2006 if that helps.
Is there a way to open this file. I also have a pdf that I created from this file. I have Acrobat CS4 Is there a way to export the pdf back to an Indesign file. Just another thought regarding this file.

I was trying to open and old .pmd Page Maker file that was created in a Windows version of Page Maker. I am not sure what version they were saved in. The file was created in July of 2006 if that helps.
It's been a long time since I was up to speed on PageMaker. The pmd file extension refers to Pagemaker 5, right? InDesign should be able to import the output of PM 6.5 and PM 7, but I've found that the PM6.5 import is usually pretty decent, while for some reason the PM7 import is flaky. This probably is a result of changes in the way the documents were build by the, ah, "designers," and has comparatively little to do with the abilities of ID to open PM files of various versions. PM5, however, can't be imported by InDesign, I think.
What happens when you try to open them? Does InDesign crash, or does it fail without an error message, or ??? More details, please.
Is there a way to open this file. I also have a pdf that I created from this file. I have Acrobat CS4 Is there a way to export the pdf back to an Indesign file. Just another thought regarding this file.
Well, there's always the PDF2ID tool, but since PDF is an uneditable container format, the results of running a PDF through PDF2ID is not reliable. Sometimes you get something very much like the source document, but I've found that most often it is faster to rebuild from scratch. I didn't buy PDF2ID, but that is because my clients' bizarro formatting techniques break on conversion. A very simple document might come back a lot cleaner.

How I fixed the missing shortcuts in InDesign CS4

Today, I got hit by the 'missing shortcut' syndrome on my Windows install of InDesign CS4 - all menu items were totally void of any shortcut. Even cut, copy, paste had no more shortcut keys - Ctrl-X, Ctrl-C, Ctrl-V didn't do a thing.
I tried fixing it via the Edit - Keyboard Shortcuts... menu, but there I could not even see a set name, and there was nothing I could do.
Ok, tried resetting the preferences - no joy.
Ok, tried wiping the 'Version 6.0' folders from the hidden folders where preferences were stored - no joy.
I got out some diagnostic tools, and noticed InDesign was trying (and failing) to access a folder called
C:\Program Files\Adobe\Adobe InDesign CS4\Presets\InDesign Shortcut Sets\en_US
I checked it out - I did not have a folder called en_US in
C:\Program Files\Adobe\Adobe InDesign CS4\Presets\InDesign Shortcut Sets
but I did have a folder called en_GB
Hmmm....
I opened an Explorer window into the InDesign Shortcut Sets folder, and I made a copy of the folder en_GB and renamed it to en_US.
Relaunch InDesign and bingo - all is well!
Looks like InDesign is getting confused between British and US English - probably it got installed as British English, then decided it rather be US English. Why that'd be - no idea.
So, here's what you can try if your shortcut keys suddenly disappear on you:
1) Navigate to the Adobe InDesign CS4 folder
2) Go into the Presets folder
3) Go into the InDesign Shortcut Sets folder
4) If you see a folder called 'en_GB', but no folder called 'en_US', make a copy of the en_GB and rename the copy to en_US. Possibly the reverse could also happen - you see en_US, you might want to try and copy it to en_GB.
Hope that helps!
Cheers,
Kris

Thanks for responding.
I had all the Symptoms you list and Kris's solution sorted them out. (It's well worth keeping a backup of those folders.)
However, I found I still had problems that may or may not be related (sorry if this is off topic). Most notably "Registration…", "Deactivate…" and "Updates…" buttons greyed out in InDesign, Photoshop etc. and from Task Manager I noticed that the processes would not stop when you quit these programs. Also Distiller refused to start.
After wasting further time I made a few complaints and was finally allocated a tech person in Adobe support who was actually very helpful. By remote control he deleted the hidden file adobe_00080000_tsf data from the hidden folder C:\ProgramData\FLEXnet. We then started InDesign and I had to enter my Serial No. and register again.
This pretty well fixed the other problems above for a day or two then I started getting "Unable to find "Adobe PDF" resource files." This was fixed by another helpful tech person in Adobe support who, by remote control had a poke around in the <C:\Program Files (x86)\Adobe \Acrobat 9.0\Acrobat\AMT> folder and surprisingly everything started to work properly again. I don't think he even moved or deleted anything but the whole suite has been trouble free for over a week now.
Hope this helps someone.
Kainga

InDesign CS4 - Index no longer lists entries

First off, it's been a while since I've posted here! I feel all giddy =)
Second, thanks for taking time to look at this one....
I'm on XP using InDesign CS4. We've created and updated many book files over the years starting with CS1 and have not run into this situation before. I'm hoping someone out there can help shed some light as to why, if not a fix. This particular project is a chapter based book file that was originally made several years earlier using InDesign CS1. There are 11 chapters, plus Table of Contents, Index, and technical matter up front. Since the original production, information has changed so we have set out to make an update.
Updates included:
- Figure edits/addition (all externally linked to .AI files)
- Layout changes (i.e., page shifts due to additional graphics, some text content added, some removed, but nothing heavy)
- Conversion from CS1 to CS4
- Chapter Title updates (we are not using any scripts that name internal content based on file name)
- Chapter sequence has changed so that old Chapter 5 is now new Chapter 1 and all following chapters shifted up by one. This literally changed all file names of the individual InD chapter files used to comprise the book document.
OK!
Old Chapter 5 is now new Chapter 1 and required reinsertion into the book document. This was the same for most of the other chapters as well. Upon all updates, the page numbering, sequences, etc., all checked out. I updated the ToC withgout issue. I then attempted to update the Index. This is when I noticed that the "Update Index" option was greyed out (Windows/Type & Tables/Index Shift+F8). Odd, but Ok, so I tried to generate a new index. No luck there either as it only created a empty text field with the title "Index" but with no entries. I then checked the Index Preview list and noticed that all but perhaps 5% of my entries were missing.
So this is where I am. Yes, content was edited, but not to the extent that would have deleted so many indexed entries throughout the book. Has anyone had experience with index errors during conversion from CS1 to a newer version? Or perhaps by renaming and reinserting chapter files into the master book document? I always assumed that the Index entries were held within the chapter file they were created in, until running the book-based Index generation. Perhaps I'm wrong. Could renaming/reimporting chapters have wiped my entries?
I do have the old Index.ind file with all old entries as well as several prints for reference should I need to comb the ENTIRE book replacing each Index entry. I hope that is not my only option! I hope hoping that one of you might offer some sound advice that I'm overlooking here before I head down that road. Please help me, Obi-won. You're my only hope. Any takers?
Thanks in advance for any suggestions. It's much appreciated!
- Noel.

yn wrote:
First off, it's been a while since I've posted here! I feel all giddy =)
Second, thanks for taking time to look at this one....
I'm on XP using InDesign CS4. We've created and updated many book files over the years starting with CS1 and have not run into this situation before. I'm hoping someone out there can help shed some light as to why, if not a fix. This particular project is a chapter based book file that was originally made several years earlier using InDesign CS1. There are 11 chapters, plus Table of Contents, Index, and technical matter up front. Since the original production, information has changed so we have set out to make an update.
Updates included:
- Figure edits/addition (all externally linked to .AI files)
- Layout changes (i.e., page shifts due to additional graphics, some text content added, some removed, but nothing heavy)
- Conversion from CS1 to CS4
- Chapter Title updates (we are not using any scripts that name internal content based on file name)
- Chapter sequence has changed so that old Chapter 5 is now new Chapter 1 and all following chapters shifted up by one. This literally changed all file names of the individual InD chapter files used to comprise the book document.
OK!
Old Chapter 5 is now new Chapter 1 and required reinsertion into the book document. This was the same for most of the other chapters as well. Upon all updates, the page numbering, sequences, etc., all checked out. I updated the ToC withgout issue. I then attempted to update the Index. This is when I noticed that the "Update Index" option was greyed out (Windows/Type & Tables/Index Shift+F8). Odd, but Ok, so I tried to generate a new index. No luck there either as it only created a empty text field with the title "Index" but with no entries. I then checked the Index Preview list and noticed that all but perhaps 5% of my entries were missing.
So this is where I am. Yes, content was edited, but not to the extent that would have deleted so many indexed entries throughout the book. Has anyone had experience with index errors during conversion from CS1 to a newer version? Or perhaps by renaming and reinserting chapter files into the master book document? I always assumed that the Index entries were held within the chapter file they were created in, until running the book-based Index generation. Perhaps I'm wrong. Could renaming/reimporting chapters have wiped my entries?
I do have the old Index.ind file with all old entries as well as several prints for reference should I need to comb the ENTIRE book replacing each Index entry. I hope that is not my only option! I hope hoping that one of you might offer some sound advice that I'm overlooking here before I head down that road. Please help me, Obi-won. You're my only hope. Any takers?
Thanks in advance for any suggestions. It's much appreciated!
- Noel.
Please forgive my weird sense of humor, but, it looks like you've found a perfect way to delete 95% of your index markers in a book.
Seriously, I'm not certain how this could happen, but I do have a couple of ideas on how to troubleshoot that I learned from some years as a trainer and tech-support guy.
* Go back to the beginning of your process. Open a copy of an old file in CS1, if you still have it, and if it runs on a workstation that's compatible with it. Generate an index; the original index markers should work. If you don't have CS1, open a copy in whatever release you used to convert your old files, and generate an index. Compare the two indexes, if you have been able to make one for the file with CS1. If no CS1, compare the index entries in the newer version's index with the complete CS1 index. If any original-index entries from the test file aren't present in the newer-version index, here's where things went bad. If nothing's lost, this likely isn't the trouble spot.
What could go bad here? The obvious suspect is the conversion from CS1 to CS4. I can't remember how CS1 worked. If it had an export-to-inx, and you opened that inx file in CS4, and the CS4 file is missing index markers, try opening a copy of the CS1 file directly in CS4. Or, if you opened the CS1 file directly in CS4 and lost index markers, try exporting from CS1 to inx and opening that file. If both methods lose index markers, then this is the problem spot; perhaps someone has a suggestion to fix this problem.
* If the file conversion doesn't lose index markers, then the book feature is the next place to look. Create a new book in CS4 and add the files in the old order and generate an index. Compare it to the original. No loss, then push it harder, and rearrange the order of documents in the book, and regenerate the index. If this fails, generate a brand-new index. If both index generation approaches fail, then you've found the problem. Perhaps someone can suggest a fix.
* If all's OK so far, try more stuff, like rearranging chapter files, generating the index.
* If rearranging files works, test each succeeding step in the process until you find the failure.
* If you can't find a fix for the problem you uncover as the cause, one possible help in re-marking content for a new CS4 index would be to export the original book file set from CS1 to PDF with index entries set to create hyperlinks. Then work through that PDF index by clicking the page references to find their sources, and create new markers in the new files.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Not able to create a plugin using Dollyxs in Indesign CS4 SDK (windows)

Hi,
I am a beginner in Indesign plugin development.
I have installed Indesign sdk cs4 and Indesign CS4.I have j2re1.4.1_01.
I have created SampleProject/SampPro/Project, Source , Resource folders in
Indesign cs4 sdk folder.
When I enter all information in Dollyxs Batch file for creating a new
plugin and click ok the project, source, resource files are not getting
generated. But only in the cmd.exe there are some lines printed.
Can anybody help me abt sample plugin Dvelopment using Dollyxs.
Is am I missing something.
Thanks n Regards,
Ravi Sharma

Hi Schneider,
It is giving following message at cmd.exe.
java.lang.NoClassDefFoundError at:various file paths
I have j2re1.4.1_01 loaded.
Thanks
Ravi Sharma

InDesign CS4 fails to bold (CMD-B) a specific font

Similar Messages

Maybe you are looking for