InDesign CS5.5 Print Booklet Only Printing Even Pages
I'm having an issue with print booklet in Indesign CS5.5. I haven't used it before, so I'm not too familiar with it, but here's my problem:
I'm printing out the document (comprised of letter-size facing pages) as a PostScript file, then converting to PDF with Distiller. When I preview the document in the print booklet dialogue box, it looks good, and shows all the pages facing one another in the correct order. But when I print the PostScript file and use Distiller to convert it to a PDF, all I get in my final file are the even pages (the "left" pages).
I'm trying to print my file on tabloid paper so that my booklet ends up letter size. But the pages that print booklet is sending out are only letter sized. It's like somehow in the process, the odd pages are cut off and I only end up with letter-sized even pages.
Any idea what I'm doing wrong? How can I get the pages to end up on Tabloid size paper and not lose any pages?
Any help you might be able to offer would be highly appreciated!
Thanks,
Landon
System Info:
Mac OSX 10.7, Lion
Adobe InDesign CS5.5
Sounds like the file is not set to tabloid in the postscript so it's cropping off the right hand side. Printing to postscript for distiller is pretty complex on Mac these days. You need to use the AdobePDF ppd, not device independent, and I don't believe it's installed anywhere by default. Take a look at Creating PostScript Files in Snow Leopard for Older Print Workflows | InDesignSecrets
Similar Messages
-
Is it possible to print just odd or even pages when preparing document or a booklet?
Is it possible to print just odd or even pages when preparing document or a booklet?
It can also depend on the application you are using. Which are you using for this project.
-
Printing error with odd/even pages
Apologies if this is the wrong group, I looked for a more
appropriate one
but there doesn't seem to be one on this server. If there's a
better place
to ask this question, please let me know.
Anyhow, I'm using Acrobat Reader, latest version (I updated
off the Adobe
site after first noticing the error just to be sure), and I'm
having a
couple of serious bugs when it comes to printing odd-only or
even-only pages
of a multi-page document. (I don't have one of those snazzy
re-feeder
printers that can do both sides, so if I want to print
double-sided I have
to do first one then the other.) At any rate, the problems
are thus: on a
document which has an odd number of pages, if I tell it to
print all
odd-numbered pages, it will invariably skip the first page.
This one's not
that serious, as I can just manually print page 1 after the
fact. The
really annoying problem occurs when I try to print the
even-numbered pages.
What happens in this case is it prints the first page (i.e.
Page 2) *twice*.
Once on the back of page 1 and again on the back of page 3.
Needless to
say, I now have to throw one of them out and redo it. (I've
taken to
printing the even-pages first now, so I can use the backside
of that extra
page 2 for scrap paper, whereas previously the extra sheet
was basically
useless as it was printed on both sides.) The bug does not
seem to occur
with documents that have an even number of pages. Only those
with an odd
number. Doesn't matter if I choose back-to-front or
front-to-back. Doesn't
matter what printer I use, I've tried 3 different ones (and
made sure I had
the latest drivers for each) and it happens in every case.
I'm guessing
that there's some confusion in the software as to the number
of pages it's
supposed to print. If a document has an odd number of pages,
there's one
more odd-numbered page than there are even-numbered pages,
and it's getting
it backwards, printing one more even-numbered page and one
less odd-numbered
page. Anyhow, it's really annoying, and a waste of paper and
ink as well.
Any ideas how to avoid this? (Seriously considering editing
the documents
and adding one blank page to the end of every document with
an odd number,
though it seems like that shouldn't be necessary...)Thank you for your response. These forums are specific to the
Acrobat.com website and its set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/ -
Printer will only print 10 pages at a time
Printer will only print 10 pages even if I ask it to print 33
Hi, are you printing from a mobile device or a desktop/laptop PC? What printer model do you have?
Best
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee. -
when I press ALL in print options, my canon printer will only print the first page. It is connected to wifi
when I press ALL in print options, my canon printer will only print the first page. It is connected to wifi
-
HO D110 series printer will only print half of page get error
Ever since I got a new lap top that has Windows 8 my printer will only print half of the page and then stops. I get an error message. I have used the online Wizard and downloaded the new driver but it still won't work. Also can't print wirelessly still from other devices.
Hello mrshayes,
I saw that you have a new laptop with Windows 8 and now the printer is printing half a page and will not print any more. I understand you also cannot print from other devices. I have some suggestions for you.
First, try to make a standalone copy from the printer itself. If the copy is successful, the printer tests out okay. If the copy fails, try resetting your printer and ensuring it is plugged in directly to the wall outlet, avoiding power bars, surge protectors, etc.
Here is a link on how to reset the printer: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03177455
If the copy works fine, see if there is a Firmware Update needed: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02919168
Also, run the Print and Scan Dr. to detect any issues. This tool might fix the problem.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-126353-1
Please let me know if you run into any troubles and I will do my best to help.
Thanks!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
my hp 100 mobile printer will only print one page then quits. will not print all of the pages. i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.
Hello colt1,
Are you using Bluetooth or USB cable to connect to the printer? Did you install from the disc, or from the online program? When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.?
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.
Select the day. then look on the bottom left where you will see the word, TODAY, select it then select print frame.
-
I'm trying to print a multiple page document from my ipad using an AirPrint printer. Only the first page is printing. Please help. The printer works correctly with my desktop and laptop.
What version of iOS are you using? Some people were having this problem before, and it was fixed when they updated to iOS 5.
-
Why does "Print Booklet" not print all the files in book?
My new Indesign CS4 will not let me do what I was able to do easily with Pagemaker 6 and Indesign CS2. When I go to “Print Booklet”, the program will not print the entire book, but only whatever file is check marked at the bottom of the WINDOW tab on the Menu Bar. I have tried with the files in the BOOK Menu selected and not selected. No difference. I have tried every way I can think of to add and link the files indicated in the Book Menu to the actual files. Each time the same. I have reinstalled the program. Still the same. I am using a Mac PowerBook G4 with OS X 10.4.11. Your ideas and help will be greatly appreciated..........Richard
Sorry, Print Booklet simply isn't designed to be used with multiple files. You'll notice it isn't available in the Book Panel menu.
You could export the entire book to PDF, then place the PDF in a new document and use Print Booklet to print that. -
Printer will only print from computer won't copy from printer
My printer will only print items that i send to it from y email. when i walk out to the printer and try to make copies the pages all come out blank no matter if i use the document feeder or place them on the glass directly. i have turned it off and back on but the problem was not corrected.
Hi @sandylouise,
Welcome back to the HP Support Forums! I see you are not able to make copies from the front panel of your HP Photosmart. I would like you to go ahead and perform a Hard Reset:
1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
2. Unplug the other end of the cord from the power source.
3. If there is a power module on the power cord, disconnect one end and reconnect it.
4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
5. Plug the power cord into the back of the printer.
6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
8. Connect any other needed cables to the printer.
If after the Hard Reset you are still unable to make copies, please call our technical support at 800-474-6836 as it may be the hardware. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color
Check the printer itself. Some printers you need to set the color & B&W settings on the printer itself instead of the Mac. If that is not the case w/your printer, contact HP tech support and/or post in their forums if they have one.
-
How do I set up my printer to only print in black?
how do I set up my printer to only print in black?
Please read this post then provide some details. What printer model? What operating system? Depending on your printer model you might remove the color cartridge, forcing black only printing, or select "Print in Grayscale" and "Black ink only" in the driver.
Some printer models (whether from HP or other manufacturers) may not allow printing in black if the color inks are empty. There are also some other constraints, black only printing is generally not available when printing on photo papers and may not be available when printing with an automatic two-sided duplexer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
I've recently purchased an iMac and connected up my HP Photosmart C4280printer. The computer downloaded the driver but the printer will only print in black and white. I've looked in preferences etc but cant see any way to change this. Any ideas??
Select a document, CMD+P, and set the color options as shown here:
-
Printer will only print for maps
Just bought a new printer. We are trying to connect and we get the following message. We get the message printer will only print from aps. We can print with the chord but not wireless. We have a envy laptop
Hi,
Please run setup on your computer (using the CD) and select convert from USB to wireless.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
Report to check "Book Qty & Counted Qty" in Warehouse Management
Hi All, In MI24, I can see "Book Qty & Counted Qty" in Inventory Management. But, Is there any report to check "Book Qty & Counted Qty" in Warehouse Management. If any report is there, let me know the T-Code. Regards Siva
-
Multiple FileChannels on a Single File
I wonder if anyone could help on this please: is it possible to have multiple filechannels on single file, basically I have a RandomAccessFile where I got my FileChannel from , any attempt for a getChannel on this RandomAccessFile object always retur
-
Can't login to console SCMM2012R2
Hi, I did a fresh install of SCCM2012R2. After a gruelling prerequisite fulfilment I can't even log into the damn console. It tells me "The user account running Configuration Manager has insufficient privileges to read information from the Config Sit
-
Assign own FM for mapping BAPIMTCS- BDoc
Hi All! Help me please, how can i assign own FM for mapping BAPIMTCS to BDoc (for object BUPA_MAIN). In tr. R3AC1 i can't do this. I can't make changes to table SMOFSUBTAB via SE11. Thanks!
-
GR Amount diffrent to Itemline amout
HI All, i got question reg PO, PO was raised for 50 hrs @1900 Dkk makes total of 95000DKK i can see this in conditions when they GR'd for 27.3 hrs @1900 hrs same line item the total amount comes to 16,648.78 DKK so dont understand why this happens