InDesign CS5 causing problems with InCopy assignment file but not content files
I'm having a strange InDesign/InCopy CS5 issue (Mac OSX 10.6.6; all system & Adobe updates are current). In my InDesign doc I have one assignment file containing two content files. All of the InCopy pieces work fine in InDesign (i.e., I can check out/in, edit, etc.). When I go to open the assignment file in InCopy, InCopy starts to open it but then crashes. If I try to open each content file directly in InCopy, no problem. I've tried deleting and recreating new assignments in InDesign, but they all have the same result in InCopy.
I think this actually is a problem with the InDesign file because if I export the InDesign file to IDML, then try to open the IDML file, InDesign crashes! I've trashed my InDesign preferences, made sure all cross-references are up to date, etc. Anybody have any ideas what else to look for in my InDesign file that might cause this problem?
Thanks!
Andrea
Thanks John!
1) Here are the first 10-ish lines from the crash report that is generated when I try to open the IDML file:
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 ??? 0xa0c266f0 _XHNDL_trapback_instruction + 0
1 com.adobe.InDesign.Indexing 0x20778192 GetPlugIn + 341394
2 com.adobe.InDesign.Indexing 0x20779009 GetPlugIn + 345097
3 PublicLib.dylib 0x0129228b CScriptProvider::AccessProperties(IScriptRequestData*, IScript*) + 571
4 com.adobe.InDesign.Scripting 0x1f4befe8 GetPlugIn + 166440
5 com.adobe.InDesign.Scripting 0x1f4c2e31 GetPlugIn + 182385
6 com.adobe.InDesign.INXCore 0x20641444 GetPlugIn + 45220
7 PublicLib.dylib 0x0142c9e8 CScriptDOMElement::GetMultipleAttributes(K2Vector<IDType<ScriptID_tag>, K2Allocator<IDType<ScriptID_tag> > > const&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > >&) + 280
8 PublicLib.dylib 0x0142bd38 CScriptDOMElement::InsertProperties(adobe::version_1::vector<KeyValuePair<IDType<ScriptID _tag>, ScriptData>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, ScriptData> > >&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short, short) + 1336
9 PublicLib.dylib 0x0142beab CScriptDOMElement::SetSimpleAttributes(adobe::version_1::vector<KeyValuePair<IDType<Scrip tID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short) + 91
10 PublicLib.dylib 0x0142c0d3 CScriptDOMElement::SetAttributes(adobe::version_1::vector<KeyValuePair<IDType<ScriptID_ta g>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&) + 51
11 PublicLib.dylib 0x0142a2ea CScriptDOMElement::SetAttribute(IDType<ScriptID_tag>, DOMAttributeValue const&) + 202
2) That works. Moved all pages (frame threading was preserved) to a new doc, exported to IDML, opened new IDML file just fine. Woo hoo! One of my editors won't be pleased that all of the tracked changes have disappeared, but at least the file functions now
Wish I knew what caused the problem in the first place so we could (hopefully) prevent this from happening again. Any ideas?
Thanks again for your help!
Cheers,
Andrea
Similar Messages
-
Why can't I down load a free app I get a message that there is a problem with my payment method but I gave all information correctly , I did recently change my card no because I lost my old one .i did change the no. On my account HOPE YOU HAVE SOME SUGGESTIONS I DON'T SEE WHY THEY HAVE TO CHECKMY PAYMENT METHOD FOR A FREE GAME
Contact iTunes customer support.
We're all users like yourself and as such have no access to your account. -
Interactive pdf using Indesign CS5.5 problem with layering
Hi all
I have designed an interactive pdf - not for the web. I have a problem layering out a page. On the page there are 6 buttons. Each button when pressed will bring forward a box containing content/information. When I designed the page using indesign cs5.5 I made sure the largest box of information was at the top of the layer. I thought this would be the cleanest way to present the page. By having the largest content box (each of the six content boxes are different sizes) at the top it would cover the other boxes. When I exported the file out the smallest box was at the top, then the secondest etc. It looks pretty messy.
Is there a way to ensure that the lagest content box is at the top when it exported to pdf????
RegardsHave patience!
Have you tried putting that largest box on it's own layer at the top? I don't know much about buttons etc though, if you wait someone will come on here that does. A lot of contributors are in different time zones though..... -
Problems with sound only on video not audio files
Hello
My first post here. I am having some problems with sound on video files. It is almost no sound, and the sound that is there is only crackling noise. I have the Creative X-treme audio soundcard and have installed the Vista codec pack and the K-lite codec pack. I have also updated the soundcard driver. The thing is that these problems only occure on video files, not on audio files such as mp3's. Can anyone help me?About alsa dmix, and for the record:
On an Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, the following are my finding about
quality/cpu when mixing two streams at 44khz:
a snippet from my .asoundrc
#converter "samplerate_best" # perfect: 16%cpu, maybe overkill
#converter "samplerate_medium" # almost perfect: 6%cpu
#converter "samplerate" # good: 4%cpu, definitely usable
#converter "samplerate_linear" # bad: 2%cpu, way better than default wine resampler
#converter "samplerate_order" # very bad: 2%cpu, like the default wine resampler
Here is the reference topic: https://bbs.archlinux.org/viewtopic.php?pid=942724
I may be wrong, but in an opensource world (code reusing), i really doubt pulseaudio could lead to better quality/cpuuse tradeoff.
Pulseaudio, being just another layer atop of alsa, could only lead to higher cpu usage.
Last edited by kokoko3k (2013-11-11 15:33:41) -
Problems with where rownum = 2, but not rownum = 1.
Can anyone explain to me why I get the expected result when I do
rownum = 1
rownum <= 2
rownum < 3
but not for
rownum > 1
rownum = 2
SQL> create table test(a number, b number);
Table created.
SQL> insert into test VALUES(1,2);
1 row created.
SQL> insert into test VALUES(2,3);
1 row created.
SQL> select rownum, a, b from (select a,b from test where a < 10 order by b desc);
ROWNUM A B
1 2 3
2 1 2
SQL> select rownum, a, b from (select a,b from test where a < 10 order by b desc) where rownum = 1;
ROWNUM A B
1 2 3
SQL> select rownum, a, b from (select a,b from test where a < 10 order by b desc) where rownum > 1;
no rows selected
SQL> select rownum, a, b from (select a,b from test where a < 10 order by b desc) where rownum = 2;
no rows selected
SQL> select rownum, a, b from (select a,b from test where a < 10 order by b desc) where rownum <= 2;
ROWNUM A B
1 2 3
2 1 2
SQL> select rownum, a, b from (select a,b from test where a < 10 order by b desc) where rownum < 3;
ROWNUM A B
1 2 3
2 1 2
SQL>ROWNUM is only incremented when a record passes the WHERE clause (but ROWNUM is assigned before the rows are ordered).
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/pseudocolumns009.htm#i1006297
So if you need to use a lower bound for ROWNUM, you must use a subquery. And as you usually need first/second/third record when sorting by field x, there will be two levels of subqueries.
SELECT *
FROM (SELECT *, rownum rn
FROM (SELECT ...your query... ORDER BY x)
WHERE rownum<=2
WHERE rn=2 -
Various audio problems with the onboard speakers but not the headphones​.
The little volume wheel is connected to a variable resistor, which is soldered to the motherboard via 7 pins. when the wheel loosens up, or the pins loosen up, the onboard speakers get flaky or just don't work. We've been seeing this type of problem for a while now, and just thought that the general public should know. Either replace the motherboard, or the volume controller, or wiggle and jiggle the wheel when it gives problems. good luck all, and i hope this little tid-bit helps out.
Kudos for Linux and all freeware!!Hi,
Try the following.
First, download and reinstall the Chipset driver on the following link.
Chipset Driver - Windows 8
When the reinstallation has completed, restart the notebook.
When windows has reloaded, download the IDT Audio installer on the link below and save it to your Downloads folder.
IDT Audio Installer - Windows 8.
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio through headphones.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I can relink a psd file to a jpeg file but not multiple files at once
Initially I posted a question yesterday that Bob Levine helpfully answered -
How to update all psds in Indesign doc to jpegs?
Bob answered with - "You can batch convert them in Photoshop and save them in a new folder. As long as the file names are the same you can relink them easily by using the relink to folder command from the links panel. There's a choice in there to relink to the same name with a new extension."
This worked fine if I did the following:
Right click on PSD file I want to relink in the Links panel, choose relink, select the jpeg file in the folder.
However if I select all the PSD files in the links panel, choose relink to folder command, choose the folder along with ticking the box for "match same filename but this extension: jpeg"
I get an error message "Failed to find ** links in new folder.These links will not be relinked and will remain selected in the Links Panel."
The same thing happens if I select all the links and select "Relink File Extension" (This time I've placed all the jpeg files with exact same filename in the same folder as the original PSD files).
So, I still can't do multiple relinks without having to individually select each file I want to relink. Does anyone know what could be preventing Indesign from relinking all my files at once?
Desperately in need of an answer and thanking you in advance for all your time and understanding.
Regards,
FuiruNope I wasn't putting a dot in the file extenstion
field BUT I was putting "jpeg" instead "jpg".
Now it works. Thanks Peter. -
I have tried resetting the application settings for Word 1997-2003 -- browsing for my Word 2007 program, instructing Firefox to save the file, or to ask me what to do. In all cases, Firefox simply opens a new blank tab. I have also tried resetting the setting and closing then reopening Firefox.
Hello,
With firefox 4.0.1 I encountered this problem too. '.doc' files don't open the 'Ask Always' Popup asking either to open or save the fine.
This works fine for 'docx', 'ppt' or other file type.
I only encountered this problem since I upgraded to FF 4
My application setting for both Word extension type are the same.
Any solution to this?
Bas. -
I use a 500G WD as my external.. I have documents and movies there that i do not want to delete. Simply i just want to delete my time machine files completely and for my mac to not recognised it as a time machine HD.. TY guys p.s. A video would be nice
If you have the external HD setup as one partition, you cannot delete only the TM files as a unit. You will have to use the brute force method of deleting directory by directory.
If you have the drive partitioned into a TM backup partition and another partition for your other work, you can simply reformat the TM backup partition.
So, the first question is, how is your drive setup, as one or as two partitions? -
Content aware fill, fills with black'ish color but not content "CS6 beta"
Hi guys,
I am working on a pano, which i am rotating and straighting, the idea being to use content aware fill to fill in the gap in the sky. However, when I apply the Content aware fill, I am getting a darkish block of color where i had done my marque selection.
Hopefully this is visable in the image attached
I am not sure if its because of the size of the image (approx 150x30in @ 300dpi) 2.8gb. but i have 96gb of ram so that shouldn't be an issue.
anyway, i thought id share this and hopefully also find a solution
thanks
Henrik
Sorry just adding some more system details:
Windows 7 Pro x64. Dual Xeon x5650, EVGA Sr-2,
96gb RAM, GPU: ASUS GTX-460,
Bootdisk: 4R0 Intel 520 120gb,
ScratchDisk: 8R0 Intel 520 120gb,
StorageDisk: 8R0 Seagate SV35 2TB 7200rpm
Message was edited by: tivedJust want to add, that small selections are ok, as in I can do contentaware fill, on small selections, but not across the whole pano.
thanks for looking
Henrik -
Source Reformat menu item disabled for some XML files, but not all
For some reason, the 'Reformat' option isn't available for some of my XML files (in Source menu it's disabled, in the right-click pop up menu it's not even there). For example in my META-INF folder it's enabled for .wsdl files but not .xml files. In the same project, it's enabled for all .xml files in the WEB-INF folder.
Any idea what's going on?
TIAThanks to everyone for their response. But - it is NOT a copyright issue , it is NOT a DRM issue, it is not a Faber College double secret probation encoding issue.
This is a simple .wmv file, that I have copied, burned, created a disk image, made a copy of and sent to the UK, Germany, Ireland and even New Jersey. It has been played on a MacBook Pro, a MacBook, a Dell whatever, a Sony stand alone DVD player, an LG DVD player. At least three nieces or nephews, and at least 2 canines have put it through ISO 9XXX rigors.
The problem is that Apple Quick Time 7 Pro with Flip4Mac Pro "can't handle it"
It opens fine, it plays fine --- but when I try to "output" it via the FILE menu - all of the options
Share ...
Export ...
Export to Web ...
are greyed out.
I know nothing abour codecs and wrappers but I tihnk that this is the problem.
What should I know about the file?
Ffor example, years ago, all you needed to know about a Mac file was the "Creator" and the "Type" - both were 4 character codes. something like ADOB for Adobe and PMK2 for Pagemaker 2.0.
Any help identifying the file and what I can use to get it onto my iPhone will be appreciated.
Thank you. -
I do have this problem with placing jpegs in InDesign. Very specifically, I can’t place or relink to a jpeg that was made by InDesign (export page > jpg), although I can drag and drop it into the file, and it shows up correctly. I can place or relink to a jpeg made by Photoshop.
ok, sorry... I'm novice.. I have reposted the answer in correct forum and added basics infomrations.... INDESIGN CS5 V. 7.0.4: Can’t Open a .jpg file in InDesign made with InDesign (It’s Grayed Out)
How I can stop/delete this discussion? -
InDesign CS5 Packaging Problems
Hi all,
Ok, after a scan of the forum, I saw a few topics that were close to the same problems I am having. Hopefully one of the Adobe techs can shed some light on this for me.
I am running InDesign CS5 7.0.3 on a Mac Pro running 10.5.8, 3ghz Quad Core Intel with 4gb of ram.
My situation:
I go to package a file with no errors in the pre-flight panel. It gets all the way through the fonts section, it gets all the way through the images section and then hangs at the very end of the package process. The progress bar goes no further than this and the only way out is to force-quit InDesign.
NOW, when I re-start InDesign, the recovery takes place and it has opened the file it just packaged (not the one I was originally packaging) and all links and fonts load properly. The file needs to be saved, so I overwrite the file and all seems fine. EXCEPT, when I go to re-open the file (which is now in its packaged folder on my desktop) - it won't open and InDesign hangs.
Fair enough. I move the file (only) outside of the folder on to my desktop - and get THIS! It opens PERFECTLY.
So to recap, it won't open from the folder but it will open from the desktop.
I thought it might be a permissions thing, but I tried giving all users read & write permissions and it still wont open from inside the folder.
The craziest part of all this is that it is only happening to a select few files, while others package without a hitch.
AND these are all files we have packaged before (granted, that was before we upgraded to CS5) but now even the older versions of these files won't package from within CS5.
My temporary work around is to export an IDML file, open that in CS4 and then package from there - which works perfectly.
Did Adobe completely change the packaging process in CS5? I've heard rumors CS5 was re-written from the ground up, so I am assuming something has changed causing problems with some files.
I consider myself a pretty advanced user of Adobe products and I can usually figure out major problems on my own, but this one is really throwing me for a loop.
Any insight and/or help would be greatly appreciated.
Thanks!!
- Joe C.Dear Adobe,
We are using Adobe InDesign CS5: Version: 7.0.4, running on an Intel Apple Macintosh that is using OS X, Version: 10.6.7. This problem has also been exhibited on other Apple Macintoshes here.
We have read all the post and tried changing all the fonts, still resulting most of the time with the same problem.
1. When Packaging the process locks up with the message: Saving the Document… Open Document “Section 04.indd”. InDesign is now non responsive and hung up.
2. InDesign needs to be terminated with “Force Quit”.
3. When InDesign is restarted it is in the recovery mode and (2) windows open of the same file with an asterisk in front of the name, indicating that they need to be saved.
4. Once saved, restarting InDesign either results in a locked (hung-up) state or it will start up OK only to hang-up when packaging again.
Note: I have screen shots of these windows and original files if needed.
This is what I have found out…
1. If I uncheck the box “Copy Fonts (Except CJK)” in the window “Create Package Folder” I have no problems, except I now do not have the collected fonts.
2. If I change all the fonts to a known good font it might fix the problem sometimes.
3. Looking at the embedded fonts in the Illustrations, if I find a missing font and then replace it in Illustrator with a known good font and then save this illustration out as a new file and then re-link to this file the problem will go away.
The problem seems to be sporadic.
I think what is happening is during the packaging process; the fonts that are either collected, or embedded in the illustrations become corrupted by InDesign.
I have lost DAYS! With this problem and am trying to make a living using InDesign. I do not have the time to do all this troubleshooting on an Adobe product.
I find it curious that this is happening on both the Mac and PC platforms and find it even more curious that it seems not to be happening using CS4 InDesign like it is with InDesign CS5 as stated in the other post. -
Indesign CS5.5 crashes with font error
Hi-
Just started up ID CS5.5 after a month or two and when trying to open any files, we get a crash. ID complains about font missing and then immediately displays the standard windows error..indesign has crashed, do you want to send logs, debug, etc.
I have renamed the preferences per other posts and no change. How do I check all the installation files for ID or does it required an entire reinstall? This is very strange as ID has been extremely stable on this machine...can't say we have had one crash..til today. Suggestions? Thank you!Thank you. I will check. I have debugged this to being an issue with a font..(I hate to say you were right) in the CS3 files. ITC Zapf Dingbats was in called for in the CS3 file but not on that system. The CS5 system does have the font, but there is something that has changed in ID CS55 recently(past two-three months) that breaks in this situation. I found out because when the system crashed, upon restart it tried to open the crashed file. There was no text..as I clicked on the + symbol to reload text into the frames, I was able to localize the bad frame. Then I went back to the source CS3 file and changes fonts until I found what was causing the failure. Can this be submitted to SQA for a patch?
-
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap
Maybe you are looking for
-
Dynamic Filename in global container
Hi, I want to get filename dynamically and I have standard function DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION); DynamicConfigurationKey key = Dyn
-
How to process screen flow using PAPI and WAPI
Dear all, I need to process the screen flow from PAPI or WAPI. I want to know which API(PAPI or WAPI) i should use and how to achieve that. as far as i know, there is two part in WAPI. (external to work portal, throungh the html process API, and inte
-
Dear All, My clients has raised a quesry that his user are facing problems while executing a transaction MB5B. This transaction is being required by 10 users at same time with different reporting variants. The system takes huge time & in many case it
-
So I stumbled upon this update statement in some stored procedure in this data warehouse I'm looking at. I am utterly disgusted by this statement and was wondering if anyone had ideas? Basically what this query does is set a record to become historic
-
Everything was working fine with my wiki web site a couple of days ago. This morning when I tried to log in, I couldn't. I can get to the main wiki page: https://tewiki.trilleng.com but when I click on "My Pages" or "Wikis" or "Blogs" and try to log