InDesign CS6 - fonts problems (Document fonts fight with system installed fonts, "font incomplete")

hello
First, Indesign function to automatically open fonts from "Document fonts" folder is fantastic, quasy font manager. BUT, fonts is available ONLY for THAT indesign document, no other application can use it, even from CS6 suite. This is probably the most stupid decision about how this function must work. IDEALLY, fonts will be available for ALL application inside CS package until indd doc is closed. If I need some font for editing links in photoshop, illustrator I need to install them. This workflow have wrong concept.
We now have problem, sorry Indesign have problem. Example, I need type1 font mt-symbol for mathtype AND for Indesign. This font is installed in c:\windows\fonts folder. Everything work fine. When I make package from Indesign and reopen indesign indd document inside package, Indesign report that mt-symbol IS INCOMPLETE. WHY, BECAUSE CONCURENT FONTS from both C:\windows\fonts folder AND FROM "Document fonts" folder. If I rename "Document fonts" folder, Indesign open font only from system and everything work properly.
THIS IS BIG PROBLEM, fonts circles around workflow/folders and always will be duplicates in "document fonts" and system\fonts folder because different application need same fonts.
Any solution?

Another problem with the Document Fonts folder that we just noticed: in CS5, you could place Windows Type 1 fonts (.pfm and .pfb) into the Document Fonts folder on a Mac and InDesign would activate them.
This no longer works in CS6. (Bug report filed.)
Huge bummer, as this was a great timesaver and workaround in a high-production prepress environment when working with old Windows files. Hopefully this was not an intentional change and will be restored in a later bugfix release, or at worst in CS7.

Similar Messages

Indesign CS6 quits during document recovery, even after restart. How do I get out of this cycle?

Indesign CS6 quits during document recovery, even after restart. How do I get out of this cycle?
I was saving a document when it originally quit. so "locked" file appeared in directory as well as reg file.
Upon restart of InDesign, recovery failed and software quit again.
Restarted computer, then indesign, file opens but as soon as I select "recover" it sends a message that indesign needs to close.
I cannot seem to get out of this cycle. Help.

Use your operating system’s Search utility to find a folder called (InDesign Recovery) and delete it.

Font problems on rethat linux with form9i

When we try to connect forms 9.i from redhat Linux 9 with netscape 7.1. We are using java j2re1.4.2.02. Although we have installed true type fonts(like Arial) on linux, we couldn't see the fonts we implemented. Instead,we see Lucida type fonts. We have also tried on font.propreties file of JVM on linux. On the other hand, we have no problems in Windows clients with IE 6.0.

Hi
I'm looking at making Arial available (using the fontmapping) for a solaris client and I'm a little curious if you by now have a working configuration on your linux system and the steps required to make it all work ?

Indesign cs6 printing problem: OSX 10.9. Mavericks: Message: waste toner box full, not printing.

This problem was fixed in 10.6.8 with help of Apple and CNET:
LPD Printer backend file bug.
How to fix printers not working in OS X 10.6.8 | MacFixIt - CNET Reviews
Now it occurs again in Mavericks. Indesign CS6 does not print. The same document in PDF prints without problems with Acrobat.

Hi,
The HP Deskjet 845c is actually no longer supported on Mac OS X since version 10.6:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01856359&tmp_task=prodinfoCategory&cc=us&dlc=en...
You may try installing the 3rd party HPIJS drivers which seems to support the 845c.
Be sure to install any of the 3 required download prior adding the printer:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosxhpijs
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Indesign CS6 color problems

Hi there!
I've a problem with colors and/or color profiles.
When I import an image (rgb or cmyk) into InDesign, when I export the pdf, it change completely colors; it looses a great part of red-magenta areas.
I tried quite all profiles suggested in the output intents (Fogra 39, Euroscale), and type of Pdf (X1, 2...).
I tried also to synchronize all applications profile colors with Bridge, choosing Europe Prepress 3.
I live in Italy, I own a Master Collection CS6 in English and I work with a Apple MBP 15" Mid 2014.
I never had this problem before.
Please help me, because i don't know what to do and because I can't export any pdf for my job!!!!
Alberto
Update:
I tried to export from Photoshop the same image as Tiff and as Pdf. The first is ok, the second one has the same problems of InDesign.
I tried also to print directly from Indesign and the problem persist.

Hi Rob! I'm your italian nightmare!
So I create a new document with this profile:
and exported in this way:
The image inserted has SRGB Calibrated20090131 (8bpc)
These are:
1) the image
2) the scan of the image
3) the scan of the pdf
I know that scanning don't display colors as they are.
I can tell you that pdf displays colors like the image visualizers.

Indesign CS6 transparency problem

Hi all,
Problem:
A placed TIFF with a transparent background overlaps an indesign partially transparent graphic shape and where the two transparencies overlap text appears heavier, opacity is darker and sometimes there is an outline at the edge of the TIFF frame when printed.
The PDF however does not show these effects on screen, it's only in the print.
I've tried exporting with a variety of PDF types and settings, I've used the page window transparency settings, but I always see the same result in print.
Likely, I will apply clipping paths in photoshop to 'trim' the transparent area of the image to reduce the effect and avoid text. But this isn't a solution really.
Question:
Are there settings to deal with overlapping transparent images and objects?
I've seen this discussed elsewhere a little, but haven't found a solution yet. Also, I can't post screen shots due to privacy concerns.
Thanks in advance,
eu.

Actually, here's a flattener preview with transparent objects highlighted. You can see how the text that appears where the two transparencies overlap is treated differently.

Problem mounting usb stick with ISO installed on it [SOLVED]

I'm experiencing a weird problem regarding mounting usb sticks. Archlinux stopped auto-mounting usb sticks on my machine, but only those that contains an operating system. Empty or data usb sticks mount without problem.
A few weeks or month ago, I don't remember exactly, still everything was all right, but due to updates(?) usb sticks won't auto mount any more.
I have two arch partitions none of them mount usb sticks anymore with operating systems on them.
Today, I wanted to test a new operating system and write it on my usb stick, and of course I couldn't because arch didn't mount it. Luckily, on my other partitions a few old distos are still installed – I don't use them anymore for years- I booted them up and they mounted the usb stick without problem; it seems only the up-to-date system have problem handling the usb sticks. I have two Arch system installed on two different partitions, Gnome 3 and Enlightenment, both system are up to date.
Here are some info:
[mak@myhost ~]$ dmesg | grep -E "sd[a-z]"
[ 1.369732] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.369819] sd 2:0:0:0: [sda] Write Protect is off
[ 1.369821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.369872] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.369924] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.369982] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.369985] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.370070] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.371642] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.372298] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.429438] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9
[ 1.430159] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.244580] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.348031] systemd[1]: Expecting device dev-sdb8.device...
[ 2.362842] EXT4-fs (sda5): re-mounted. Opts: discard,data=ordered
[ 3.358252] Adding 2097148k swap on /dev/sdb8. Priority:-1 extents:1 across:2097148k FS
[ 5.458907] EXT4-fs (sda5): re-mounted. Opts: discard,data=ordered,commit=0
[ 52.120360] sd 6:0:0:0: [sdc] 15679488 512-byte logical blocks: (8.02 GB/7.47 GiB)
[ 52.121310] sd 6:0:0:0: [sdc] Write Protect is off
[ 52.121319] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 52.122191] sd 6:0:0:0: [sdc] No Caching mode page present
[ 52.122199] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 52.125825] sd 6:0:0:0: [sdc] No Caching mode page present
[ 52.125838] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 52.126999] sdc: sdc1 sdc2
[ 52.131071] sd 6:0:0:0: [sdc] No Caching mode page present
[ 52.131084] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 52.131093] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[mak@myhost ~]$
[root@myhost mak]# fdisk -l
WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.
Disk /dev/sda: 120.0 GB, 120034123776 bytes, 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt
# Start End Size Type Name
1 2048 18431 8M BIOS boot parti BIOS boot
2 18432 56641478 27G Linux filesyste sda2
3 56641536 113264582 27G Linux filesyste sda3
4 113264640 169887686 27G Linux filesyste sda4
5 169887744 226510790 27G Linux filesyste sda5
6 226510848 234441614 3.8G Linux filesyste Spare
WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.
Disk /dev/sdb: 320.1 GB, 320072933376 bytes, 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt
# Start End Size Type Name
1 2048 18431 8M BIOS boot parti Bios boot
2 18432 54544383 26G Microsoft basic Partition 2
3 54544384 109070335 26G Linux filesyste Partition 3
4 109070336 163596287 26G Microsoft basic
5 163596288 218122239 26G EFI System Partition 5
6 218122240 272647630 26G Microsoft basic Partition 6
7 272648192 327174143 26G Linux filesyste Partition 7
8 327174144 331368447 2G Linux swap Swap
9 331368448 625142414 140.1G Linux filesyste Storage
Disk /dev/sdc: 8027 MB, 8027897856 bytes, 15679488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x5fadc669
Device Boot Start End Blocks Id System
/dev/sdc1 * 0 4040703 2020352 0 Empty
/dev/sdc2 4036 38595 17280 ef EFI (FAT-12/16/32)
Disk /dev/sdc1: 2068 MB, 2068840448 bytes, 4040704 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x5fadc669
Device Boot Start End Blocks Id System
/dev/sdc1p1 * 0 4040703 2020352 0 Empty
/dev/sdc1p2 4036 38595 17280 ef EFI (FAT-12/16/32)
[root@myhost mak]#
[root@myhost mak]# blkid -o list -c /dev/null
device fs_type label mount point UUID
/dev/sda1 (not mounted)
/dev/sda2 ext4 (not mounted) 0a76a275-1798-495b-aa27-732626029de2
/dev/sda3 ext4 (not mounted) 0e9363ef-3791-409c-8db9-393385007689
/dev/sda4 ext4 (not mounted) 8f043c02-8b56-4689-a0ee-ed34ccc6f21f
/dev/sda5 ext4 / 82699b0e-8fe9-41e2-be13-65c798ed8a73
/dev/sda6 ext4 (not mounted) 3eaab6bf-2d05-4a7b-a6f7-8675e5f18723
/dev/sdb1 (not mounted)
/dev/sdb2 ext4 (not mounted) 17069311-9f14-4430-8298-be48194eb874
/dev/sdb3 ext4 (not mounted) 2e3b383d-3fa7-40df-b52d-c5d07caf252e
/dev/sdb4 ext4 (not mounted) 9d9b0656-d4ca-4efa-b6f8-1797bd4ead1f
/dev/sdb5 ext4 (not mounted) 05abf58a-ae6e-4377-9b3d-d6bacd92226d
/dev/sdb6 ext4 (not mounted) 8d7c6d55-dc47-471f-84f6-aae8864dfdd7
/dev/sdb7 ext4 (not mounted) b2155741-8f88-4063-bd1b-39b210004b17
/dev/sdb8 swap <swap> 97cf7cdf-299c-4e0d-a438-c8b79766699c
/dev/sdb9 ext4 (not mounted) 426648fd-98f5-4fb0-9114-bdbdfea9047c
/dev/sdc1 udf Sabayon GNOME (not mounted) 2013-07-29-13-08-13-27
/dev/sdc2 vfat (not mounted) CF68-C2B6
[root@myhost mak]#
Thanks for the help.
jmak
Last edited by jmak (2013-08-14 00:12:54)

cfr wrote:
What is sdc1p? Is that another USB stick? It seems to have an equally weird partition map.
By the way, you can't create an Arch USB bootable in EFI mode with dd. Obviously don't know about sabayon.
EDIT: Did you dd to the disk or to a partition? What command exactly did you use? Because it almost looks as if you did something like dd once and create one thing and then dd over the top of one of the partition so you've got a partition which itself has a partition map. Not sure that's possible but it sure looks weird.
I would wipe the key and start over.
I don't know what is that. It is a partition on the same usb stick, it was the “dd” that made that partition automatically, I guess. When I burn images into usb, I always use this command:
# dd bs=4M if=/path/to/archlinux.iso of=/dev/sdx && sync
I used this when burned Sabayon and it works perfectly.
The problem is that Arch can't auto-mount its own installation usb either. I put the arch install usb in and I get the following output:
[root@myhost mak]# blkid -o list -c /dev/null
device fs_type label mount point UUID
/dev/sda1 (not mounted)
/dev/sda2 ext4 (not mounted) 0a76a275-1798-495b-aa27-732626029de2
/dev/sda3 ext4 (not mounted) 0e9363ef-3791-409c-8db9-393385007689
/dev/sda4 ext4 (not mounted) 8f043c02-8b56-4689-a0ee-ed34ccc6f21f
/dev/sda5 ext4 / 82699b0e-8fe9-41e2-be13-65c798ed8a73
/dev/sda6 ext4 (not mounted) 3eaab6bf-2d05-4a7b-a6f7-8675e5f18723
/dev/sdb1 (not mounted)
/dev/sdb2 ext4 (not mounted) 17069311-9f14-4430-8298-be48194eb874
/dev/sdb3 ext4 (not mounted) 2e3b383d-3fa7-40df-b52d-c5d07caf252e
/dev/sdb4 ext4 (not mounted) 9d9b0656-d4ca-4efa-b6f8-1797bd4ead1f
/dev/sdb5 ext4 (not mounted) 05abf58a-ae6e-4377-9b3d-d6bacd92226d
/dev/sdb6 ext4 (not mounted) 8d7c6d55-dc47-471f-84f6-aae8864dfdd7
/dev/sdb7 ext4 (not mounted) b2155741-8f88-4063-bd1b-39b210004b17
/dev/sdb8 swap <swap> 97cf7cdf-299c-4e0d-a438-c8b79766699c
/dev/sdb9 ext4 /run/media/mak/426648fd-98f5-4fb0-9114-bdbdfea9047c 426648fd-98f5-4fb0-9114-bdbdfea9047c
/dev/sdc1 iso9660 ARCH_201305 (not mounted) 2013-05-01-07-12-33-00
[root@myhost mak]#
It doesn't appear in nautilus side panel.
Last edited by jmak (2013-08-13 02:44:45)

At an impasse with system install of 10.4 and 9.2 on an eMac.

I recently purchased system disks that bundled 10.4 and 9.2. We're trying to get Classic Mode up and running on a 2005 eMac. In an effort to free up drive space for the 2 disc installation we mistakenly deleted some system files. When we try to boot up the computer now we don't get a desktop. It may be possible that the system file deletions have caused this absence of a desktop. When I attempt to boot up now, I see the apple icon but then the computer freezes at a blue screen.
Obviously, I need to get my desktop back. I also need to clear some things off the hard drive before I can install the bundled disks that should finally enable me to run classic mode within system 10.4. Should I just re-install 10.4 with system disks I already have and then do the hard drive clearing? After that, I presume I would preceed with 10.4/9.2 install. Correct?
Ed Contaldi

Hi Ed,
Hopefully these are eMac Discs!?
They had special OS9 versions.
With your original Disc(s) try an Archive and Install feature, which can give you a new OS, yet preserve your files and settings if you have enough room on your HD...
http://support.apple.com/kb/HT1710

Problem in print out with English characters (THANGSAN font)

Save Our Environment. Save Yourself.
Hi Experts!!
I have created a smartform and print program which should actually print some Thai characters and English characters too. I created a smartstyle and have some 10 paragraph formats and are all have THANGSAN font. So, I am printing all the thai and english characters in THANGSAN font only.
When print preview is seen, the output is very fine, but when being printed, the thai characters are appearing fine but the english characters' font is being changed to somehting else (courier or arial). Why is this happening so? Because of this, all the output is being merged and looking very weird.
The smartform is created in EN and is translated to all languages. All user has logged on to SAP in EN language.
Can somebody please help me out with whether the problem is with THANGSAN or the printer?
P.S. The smartform is actually similar to the standard script Z_RVINVOICE01 in which only THANGSAN is used.
- I'm not an environmentalist. I'm an Earth warrior.

Save Our Environment. Save Yourself.
Can anybody please help me out?
Thanks a lot.
- I'm not an environmentalist. I'm an Earth warrior.

PDF created with InDesign CS6 on Mavericks not legible in other systems

Recently migrated to a new MAC with Mavericks, now after creating PDF files and sending them to clients, some are able to view the file correctly and others are not?
Any help will be appreciated.

I figured it out
Just in case people had the same problem here is how it's done: (i misunderstood the two posters above me, so you are actually going to change fonts within acrobat, like they said, and save it)
Open the pdf in acrobat, go and change font settings for each of your fields and change the font under the "Appearance" tab.

InDesign CS6 opens all documents from the previous day on startup

First of all I am on a Mac using a Mobile Account. I have no admin control over this setup. Every 2 hours or the local environment syncs with the server and saves my 'computer'.
The problem is when opening InDesign in the morning to start the day hundreds of documents begin to open. They appear to be every document opened from the previous day (or more).
InDesign does not crash. They do not appear to be recovering, just opening.
I tried to clear the recovery cache, but that had no effect.
Is there something I can clear to prevent this from happening?

I was hoping to find an answer as they are not sure either.
I think Larry's answer is right, restart (without the option key) and uncheck reopen windows. It will stay unchecked unless you check it on a later restart.

Indesign CS6 nesting problem

i have a book design and each paragraph starts with a drop cap script. to lower the drop cap further down into the paragraph, i decided to "nest" it in the copy. this worked, however, it's now taking the second letter of the rest of the body copy, which is not script, and making it a script font as well. meaning i only want one letter, the first letter of each paragraph, to be in a drop cap script. my specs have it that way but for whatever reason, it's making the first TWO letters script. the second letter is not drop cap though, same size as the body copy, just script. im working on a mac pro, osx
, j

Your nested style is useless. Delete it and use only a character style on your drop cap.

Can you install Sinhala fonts for iPad 2 ?, Can you install Sinhala fonts for iPad 2 ?

There are lot of sri lankans who are interested in buying the iPad but there is a huge problem with the language barrier. If you all make an app for this as soon as possible , believe me there with be a lot of happy apple users

You can't add fonts to the iPad so that they are available in every app, only Apple can do that - so if a third-party wrote an app that included it, it would only be available within that app.
You can try leaving feedback for Apple and maybe support will be added at some point : http://www.apple.com/feedback/ipad.html

Problem: Using "msg" command with "System Exec.vi"

I'm attempting to write some LabView code that takes advantage of the "System Exec.vi". At the moment, I've tried using it to ping machines, return the ipconfig and run through the example code that NI provides.
I would like to use the "msg" command used on Windows operating systems to send out a message to multiple machines on our network at once. Warning them we're about to update a program and they should log-off, things like that.
I tried using the "msg" command in LabView keeps returning errors. I also wrote a quick batch file as follows:
@echo on
cd c:\Windows\System32\
msg.exe /server:localhost * test
When I launch the batch from windows, it executes. When I launch it from LabView (using the System Exec.vi) it fails.
Potential Quirks:
I discovered in a different location that in order for a machine to receive these messages they need to have a registry entry in:
"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" and have a DWord called "AllowRemoteRPC" = 1.
Note that "/server:localhost" could be "/server:anycomputer" and the " * " is used as a wildcard which sends a message to anyone who is logged onto that machine. Also note that "test" is the message to be sent.
Any ideas why I'm having a problem?
tl;dr: "System Exec.vi" won't run the "msg" command. Why is this?
- Mike
~~~~~~~~~~~~~~
Current Setup:
LabView 2010
Windows 7
Solved!
Go to Solution.

-> What versions of labview and windows are you on?
LabView 2010 and Windows 7.
-> Have you ever sent any commands out, or is msg the only one you've tried so far?
I've successfully used the 'ping' command and also returned a standard 'help' command to LabView.
-> Finally, in tools>>options, you may need to change your access settings under VIserver and Webserver.
My VI server settings are allowing everything except "Show VI Scripting Functions, properties and methods"
I have nothing configured for a web server, since I didn't plan on using it for this. Unless it has some sort of connection that I am missing.
I'm attempting a work-around where LabView will generate a batch file to run from the desktop instead, since it seems that something is getting lost in translation between LabView and the command-prompt.
- Mike
~~~~~~~~~~~~~~
Current Setup:
LabView 2010
Windows 7

Problems playing .wmv file with Flip4mac installed

I have a video that was made in Windows Movie Maker, I believe, that is .wmv format. Works fine on the PC at church and home, but won't play on either my MacBook or my friend's. It is a fairly large file, 483MB.
It played fine on my old PowerBook G4 in Windows Media Player for Mac, but haven't tried it for a while, and I don't want to download Windows Media Player for Mac now that Flip4Mac is installed.
Other .wmv files play fine, this is the only one that has not worked...any ideas?

Have you installd the latest Quicktime? .....Don't
Flip4mac worked well for me until I did.........

InDesign CS6 - fonts problems (Document fonts fight with system installed fonts, "font incomplete")

Similar Messages

Maybe you are looking for