InDesign CS6 resolution for pixel documents not the same

I have just opened in InDesign CS6, a document made originaly in CS5.5. This document is in pixels. At 100%, the document should be pixel for pixel with my monitor (iMac 27" at about 104 ppi), but it seems it is more at 100% if you calculate at 72 ppi. So a document of 980 pixel wide measure 13 inches on my screen! This is different from the previous way of showing pixel documents. And I can't see any preference that could bring back the resolution to the old way of showing the scaling.
In Adobe Acrobat, you have preferences to control this.
This count as a bug for me.

This is truly, completely, insanely, incomprehensibly, and unfortunately, TYPICALLY Adobe. I wish with all my heart they didn't have a monopoly on creative tools the way they do. They are the Microsoft of Creative tools. Look at us, we have to do terminal style code changes to make a product look the way it should?! THIS IS CRAZY! Adobe is trying to enter the epublishing market with an app that give you the wrong pixel sizes on your screen? Ohhhhhhhhh/ Myyyyyyyyyyy. Woooooooooord! Adobe, ADOBE! Are you listening?! Stop it.
If you are still reading. Let me offer a word of advice: We want the power of In Designs grid and guide creation, BUT can we have the simple, pathetically-normal-to-expect ability to have new objects snap to pixels?!!? I know this looks like a teenager wrote it, with excalmation marks, un restrained exasperation and ALL CAPS, but i'm just finished. I draw a square, the edges are fuzzy. I have to go to the inspector and nudge the 0.5 px off the square. Even then, it soemtimes doesnt do it. Can you image the scenario that MAYBE UI AND UX designers would like to have, oh I dunno, WYSIWYG!? I'm trying to figure out what is going on through your heads when you're designing a program with UI UX designers i mind, technally, it's being made by, oh i dunno... UI/UX designers?!? But the funny thing is, the adobe interface is beautiful. How on earth did you design that with blurry lines all over the place?
Have you seen how type renders in Indesign at "Actual Pixels"?! Have you seen how the elegant forms of Helvetica Neue which we all know so well is output to look like it's done a bag of Ketamin? Shame on you. For reals, shame on you. These are things that your users NEEED. We need to see things as they will look. It's call attention to detail. It's like designing in the dark with you guys.
Please dont tell me what a true pixel is. That is the most retarded thing i have ever heard, you will lose users in droves. Oh wait, where will they go to?! Nowhere! You are all they have! Nice one Adobe! But watch out you have pixelmator nipping at your feet. Soon your super overpriced stinking business model and your dicatative havent-got-a-clue, disrespectful to common sense ways will get you.
ARE YOU LISTENING ADOBE? :-((((((((

Similar Messages

  • Why is the documents I am scanning and converting to word documents not the same?

    I have scanned documents to my computer and when they come up in my Adobe suite, they are spelled wrong. I have 50 pagets of document with hundreds of errors. The original documents are correct. what is my problem?

    Reader doesn't have anything to do with scanning. But really, I have read your question a few times and I still can't figure out what the problem is. If you can give more detail about what you are using and what is happening, maybe we can send you in the right direction.

  • The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

    The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

    Take it to an Apple Store or other service provider for testing.

  • The partition of words is not the same as in the InDesign

    Hi sorry for mi English
    We work in InDesign and InCopy CS4. With the document open in Indesign create and share content assignments for InCopy. Once you open the assignment incopy (. icma) the partition of words is not the same as in the InDesign layout so the text goes.
    We have checked the preferences and initially appear to be the same in both applications. But I tried to open directly in InCopy InDesign document (. indd) and everything is correct.
    Help........
    Thnks

    I have to look at this but I think this updated both id and ic, and now I'll tell him
    thnks Bob

  • "Material is not the same for confirmation and delivery"

    Hello
    If this is not the right forum, my apologies. Direct me to the correct one if it is not ....
    Have been doing automated test development (HP's QTP) against SAP systems for over a year. I am not an application expert - very much a newbie when it comes to application knowledge but trying to gain some. I have "googled" the phase "Material is not the same for confirmation and delivery" and have not been able to find any references. What does this mean?
    I see this message for an iDoc using WE02. Have looked and looked but don't really know what I'm looking for.
    Clues?
    Thanks,
    DW

    DW,
    I have never seen that exact message, but I have seen similar ones.  Generically, the message probably means that you are attempting to perform a transaction against a document (perhaps a Purchase order?) and the Material number (Part Number) contained in the transaction is not the same as the Material number in the originating document in SAP.
    An example might be you have previously created a confirmation against a Purchase order, which now exists in SAP.  This Confirmation is for a specific Purchase order, item, and material.  Now, when you attempt to create an inbound delivery for the Confirmation, the material number contained in the new IDOC is different from the material number that was contained in the original Confirmation.
    I don't know what IDOC Message type you are having the problem with, but generically you can do some troubleshooting. Find the SAP Material number in the IDOC (MATNR probably).  Find the appropriate reference document number in the IDOC (confirmation number?  Purchase order number? or...?), and then manually review the document in SAP to ensure that the Material numbers are the same.
    If you are totally lost, you should really consult with an SAP App expert.  I am guessing that this is part of the Materials Management module, so you would be asking for an MM expert.
    Or, you can send more details, and we can try to help.
    What is the IDOC message type?
    What is the Message number of the error message?  Functionally, what is this IDOC trying to do, from a business perspective?
    Rgds,
    DB49

  • Does anyone knows a way to work with various Pages documents at the same time, for example with a system of tabs to switch directly from one document to the other?

    Hello everyone,
    Working with numerous Apple Pages documents at the same time, I am looking for an efficient solution to switch faster from one document to the other. Integrating all them in a single framework, for exemple by switching from one to the other with a system of tabs would be of great help. Does anyone knows if such a possibility exists?
    Thanks in advance,
    Jean-Baptiste

    jbp- wrote:
    Thanks. It works and is very efficient. Not as much as a real system of tabs, but is allows to switch very fast between different documents. Only regret I would have is that it doesn't work with a document which is on full page mode. But that's already very helpful!
    You're very welcome but Peggy really gave you the answer already. 
    With regard to the full screen apps, I don't think Apple have yet worked out how to make them elegantly coexist with other apps.  The closest you can get is the four finger swipe gestures you may use on a trackpad if you have one (Mission Control and App Exposé).
    In fact nowadays I use the App Exposé (four finger swipe down gesture) more often than I use Command-Accent to move between documents in the same app (when not in full screen).  It also as the advantage of showing you thumbnails of recently opened documents below the ones already open within the app.  If you haven't tried it, I suggest you give it a whirl.
    I can't remember now but I think the four finger gestures are not enabled by default and you must switch them on in System Preferences > Trackpad > More Gestures. 

  • MRRL- Item 00002 for purchasing document not selectable

    I have a PO which was created with ERS flag on, when we did GR we realized this should not be ERS activated PO. So we reverse the GR  and unchecked the Inv. receiptm GR based IV and ERS flag on the PO but now this PO is keep showing up in MRRL with a message "Item 00002 for purchasing document not selectable". How do i get rid off this PO from MRRL report.
    Please help!

    When an item is marked as ERS and a GR is done an entry is put in the EKRS table.   My guess is that you did not do a settlement after you did the reversal so the EKRS table still has the original GR and the reversal which is why it is showing up when you execute MRRL.    If you don't want that showing up when you execute MRRL I would add the ERS flag back long enough to do a settlement.   The settlement will create a zero value MM invoice and clear out those two entries in the EKRS table.   
    Regards,
    Sandra

  • Formatting size and resolution for PDF documents

    How do I  format size and resolution for PDF documents with Adobe ReaderX

    No way that I know of with just the free Reader.

  • Which photoshop is for beginners and not the costly full version?

    which photoshop is for beginners and not the costly full version?

    Depending on what you want to achieve, there is also Lightroom 4.
    When comparing CS6, Lightroom, and Elements, Adobe says:
    Q:  How do Adobe Photoshop, Photoshop Extended, Photoshop Elements, and Photoshop Lightroom software differ?
    A:  Photoshop Elements 11 (US$99) is designed for people who are just getting started with digital photo editing, and delivers powerful yet easy-to-use options that help you organize, edit, create, share, and help protect your personal photos.
    Photoshop CS6 (US$699) is the professional standard for creating and manipulating powerful images, and Photoshop CS6 Extended (US$999) delivers everything in Photoshop plus tools for creating and editing 3D images and objects.
    Photoshop Lightroom 4 (US$149) addresses the workflow needs of professional and serious amateur photographers, enabling them to import, process, organize, and showcase large volumes of digital photographs quickly, or develop a single image.
    And they also have a page that neatly summarizes the best uses for each product. This article gets even deeper into the comparison. I hope this is helpful!

  • Reasons for billing documents not being created ?

    I am trying to create a billing document from a delivery (VF01). When I enter document number and save, it says 'no billing documents genereated, see the log'. Where to see the log and what do you think could be the possible reasons for billing document not being created ?
    Thanks in advance,
    Krishen

    Hi,
    In VL02 transaction, Its the 2nd button on the toolbar With an `!` mark on the icon along with triangle. CLick that button. It will display the errors bcz of which delivery is not created.
    In VL01, goto EDIT-> LOG.
    The explanation of errors is usually pretty detailed.
    Best regards,
    Prashant

  • Indesign CS6 crashes opening some documents

    Hi,
    updated to Yosemite today and realise that Indesign CS6 crashes opening some documents.
    Anyone has same issue with me? Two people from my team updated to Yosemite and have same issue.
    Thinking of downgrade to Maverick but with no luck...
    Please help.
    Thank you.

    I find InDesign CS6 is running incredibly slowly and erratically (constantly producing the spinning rainbow fruit gum of death) ever since I 'upgraded' to Yosemite. Has anyone at Apple remembered that the original users (loyal as we once were) all used Macs and now all use InDesign?? This upgrade has caused all kinds of problems with Font Explorer (forcing me to upgrade that), Illustrator wouldn't load without some Java plug in ... Can't wait to retire and have done with all this nonsense.

  • HT1420 Keep being asked for my audible account id, but i do not know it. It is not the same as my Apple ID as I have tried this

    Keep being asked for my audible account id, but i do not know it. It is not the same as my Apple ID as I have tried this

    If you've forgetten the details for an Audible.com account, see:
    http://audible.custhelp.com/app/answers/detail/a_id/3270
    Regards.

  • Why files in Lightroom mobile and files in the creative cloud not the same? idea-  one place(stored date) for all application ??????

    Why files in Lightroom mobile and files in the creative cloud not the same? idea- one place(stored date) for all application ??????

    Lightroom Mobile is not a cloud storage service. You shouldn't treat it as a way of backing up your files. You are merely storing Smart Previews of your files in the cloud space, high-quality JPEGs of your files regardless of their original format on your desktop. The point is that they are there so you can continue editing them in a Lightroom-like environment even while away from your desktop/laptop computer. The files in Lightroom Mobile can only be used in Lightroom Mobile.
    This is very different from what is offered by the Creative Cloud storage, which can be used to synchronize your files between any device (that can support the individual files).
    The vast difference in how each service works and its intended use is why they are separate.

  • My SWF is not the same size as my Flash document size

    My SWF is not the same size as my Flash document size. How can I get it to be the same.
    Thanks

    I spent a little time trying to figure out if there's some setting anywhere that might explain this, but couldn't find anything.  That doesn't mean there isn't any--I just don't know of any.
    I'm wondering if you could take a screen shot that shows the stage size versus the swf size when it plays?  It will help to make sure the problem is what I think you have it explained it to be.
    Does this happen in all files you create or is it occuring just in one particular file?  What version of Flash are you using?  If you can make your file available maybe someone can see if the problem remains when they open it--possibly even track down some cause.  I am unable to open CS4 files (don't have it), but if it's an earlier version I can take a look.
    If you are using CS4, have you updated it to the latest release (10.0.2, I believe)?  There were numerous bugs when CS4 was released, though I don't know if this would be one of them.

  • I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, when I want to know how much memory can not store in the same way in either computer.

    I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, the way to see how much memory I have in my iMac is diferent than MacBookPro. And where I can see the memory of the disc I've got in my iMac? Than you very much.

    If you want everything the same on both computers you need to be running the same OS X version. You can't because your iMac is a PPC machine, not Intel.
    But to see information about your hard drive is the same for both. Simply select the drive icon on the Desktop. Press COMMAND-I to open the Get Info window. Disk information is in the upper panel.

Maybe you are looking for

  • Stock on particular date

    How the system finds stock of material on specified date . Example In report MB5b system gives stock of material on date we have selected . If I select date 31 Mar 2010 then system displays stock as on 31 Mar . From which table it comes ? (In table M

  • How can I add a new vaiable to the file loaded by Property Loader without changing my script

    I have an input file to my script that I load via Property Loader. The number of parameters in the input file may change from test to test.. Is it possible in some way to add a new parameter without changing the sequence file? Is there for example a

  • How do I create jump to (page) links using DPS in creating a digital page turner for a catalog?

    I know how to use "navto" to jump to pages within the catalog created for our app. We want to use the same article files to create a digital page turner using DPS but cannot figure out how to do it. Google searches lead to answers that say it isn't p

  • Ftp username and password when downloading ?

    Hi, I'm asked an username and password when trying to download JEE edition 5 (name for ftp://ftp.sap.com). What does it mean ? Thanks for Help. Etienne PS : server seems to be busy with more than 150 simultaneous connection....

  • SSL Trust store (root CAs) for t3S client

    How does one set the root CAs trusted by the t3s client? The client requires that the server authenticate with a certificate signed by a "trusted CA" doesn't it? From what I'm seeing, it looks like maybe it doesn't. Am I missing something? Thanks in