Indesign files won't open over a network

I have just copied my entire work folder from a 17" iMac Core Duo to a 20" iMac Core Duo. When I attempt to open any InDesign files over the network from one machine to the other I get the following message.
"Cannot open the document "xxxxxxx". You may not have permission or the document may be open already. For mutli-user access, close the file and then lock it using thee File > Get Info command in the Finder."
All my other files open correctly - Quark, Photoshop, Illustrator etc. I have read and write permissions for the entire work folder, but only the InDesign files wont open over the network. The files will open perfectly on the local machine, but not over the network.
I have managed to find a similar post on Adobe's InDesign User Forum, but not a satisfactory solution.
I have never had this problem before, I've been using fileservers for years with no problems
Please can anyone help.
Thanks

Well, I don't have InDesign or I'd try Sharepoints to see if it could help the situation, dunno...
http://www.hornware.com/sharepoints/
http://discussions.apple.com/thread.jspa?messageID=1358566&#1358566
"Adobe states that PhotoShop CS2 does not work in a network environment. Many have seen this issue with CS2 and 10.4 working in a client/server environment. This does not seem to be an issue on the Windows/PC side. The only work around at the moment is to save the file on the local drive and then copy it over to client home folder."
I think part of it is that Apple has changed the method of locking files in OSX more than once.

Similar Messages

InDesign files won't open with double click

InDesign files won't open with double click on my MacPro with Snow Leopard although they do open from external hard drives when I double click.

Thank you very much,you were correct, it appears the mouse clicks were set too fast. Thank you very much indeed for taking the time to answer my question.
Regards,
Mag1975

InDesign file won't open, missing plug-ins

Anyone ever seen this error message when trying to open an Adobe InDesign file?
Missing plug-ins:
worldready.rpln
dynamicdocuments.rpln
conditionaltext.rpln
sharedcontent.rpln
I am using a PC with CS6, but also tried another PC with CS3. Same issue with various backups of the files.
The files seem to all be older than 2012, and appear to not have a program associated with them (appear as white icons, not typical color) even though they say InDesign, INDD file when you mouse over them.
Thanks in advance.

MMXPR3CCXP    q
¬
H7
»7 5 5
              9\dt~àêò†§©≤¥∂º¡ ‘ÿ‹ﬂ„ÁÎ¯        * 4 @ B F H K Q ^ d n t v Ä Ö ú ± ¥   ÿ ‚ Ó ˝         " $ + - 0 B J b l o í ú ¢ ¬ ‹ Î ˘ ˝ * @ w Ç à ö õ ¢ © ™ ± ≤ ≥ ∏ ∫ Ω ƒ « Õ ‘ ﬂ ‚ ‰ Ï Ò ı          " % * . 2 > @ E T W Y ^ c f j k l v É Ñ é ú ü § ´ ≠ Ø ≤ ∏ ∆   “ ‹ ﬁ ‰ Í ¯ ˛                        ! ) , 8 < D G J O R T X ^ b f r v { Ç ñ • ® © ´ ≤ π æ ƒ À – “ ‰ Ï  ˆ ˛     % . < A I U [ p â é ö ° ß ∂ æ   “ · Â Ù ˙        ˇˇI
MMSTLM

Error Message when Double-clicking a CS4 InDesign File; Won't Open

I recently installed CS4, upgrading from CS2. Before installing CS4, I could double-click the icon for the file and it would open in InDesign CS2. After installing CS4, when I double-click an InDesign file icon, I get an error message that Windows cannot open the file and needs to know which program should be used. I check the "Select the program from a list" and a window opens that lists several of the applications I have installed. Neither InDesign versions are on the list, so I "Browse" to the Adobe folder in which both InDesigns reside. I then select a version (it doesn't matter which one; neither work) but then it doesn't appear in the list and my "selection" reverts to the "recommended" Photoshop CS4.
I can understand if this function has disappeared in CS4, and we now have to open a file using the "open" menu item, but I can't understand why neither verison "sticks" in the "Open With" window.
Any suggestions? I'm using Windows XP SP2.
Thanks,
Lloyd

That's what I thought. I tried the folder options association trick at http://forums.adobe.com/message/2864550#2864550, which kind of worked. Now, when I double-click on an InDesign file icon, InDesign CS4 opens, but the file does NOT open. Looks like I'll have to reinstall, unless someone has an addition to the solution.
Thanks!
Lloyd

InDesign File Won't Open

I have an InDesign CS5.5 file that I was working on without issue last night and today when attempting to open the file it causes InDesign to crash. So I can't navigate, or save down/idml etc. It also does the same thing on four other machines. Sort of at a loss as I don't want to recreate the last two days of work. Any ideas or suggestions on how I can open the file at least enough to export it to an idml or something like that?
I've searched previous posts and can't seem to find one that addresses any possible solutions when you can't get the file to physically open. Maybe I'm just up the creek.
Thanks

I did fool around with that, but the script keeps producing errors ... but i'm not sure i'm putting things in the right spot ... do i save it with the file name in /.indd? like such?
// blindOpen_and_IDML-Export.jsx
var _file = File.openDialog("InDesign-Datei"); // Selection of a file
if(_file != null)
var d = app.open(_file, false); // Open the file without showing it
d.exportFile(ExportFormat.INDESIGN_MARKUP, File(_file.fullName.replace(/C:\Users\100136858\Documents\Basketball\2014-15\Notes\120614 _NorthDakota\120614_NorthDakotaNotes.indd$/i,'.idml'))); // Export im IDML-Format
d.close(SaveOptions.NO); // Close without saving

Indesign file won't open native CS5 file, gives me "missing plug-in or being used?

I've tried to open both a CS4 and CS5 file from another designer, and it gives me a message "InDesign may not support the file format, a plug-in that supports the file may be missing, or the file may be open in another application." (which it is not) I've downloaded the update, but still no luck. Any ideas?

Are you sure it's an InDesign file? How did you get the file?
Bob

Cs6 Indesign files won't open

My ID icons are now white and file type reads indd, not indesign. None of my files will open anymore. I get an error message that the files is either corrupt or not supported.

If you are going to install multiple versions you should install in chronological order, and if you want uninstall old versions that should be done before installing new ones. Sounds like once again the icon handler dll file is damaged. Since it sounds like just reinstalling CS6 did not work the first time, I'd uninstall both CS5 and CS6 and then run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) before you try to reinstall. I'd also run MSconfig to turn off unnecessary startup programs and services just before you do the reinstall (How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista). You can run MSconfig again after to restore normal startup.

I upgraded my iMac OS to OS X Mavericks and now I my CS2 InDesign files won't open?

How can I access my old InDesign CS2 files after I upgraded to iMac OS X Mavericks operating system?

Yes thank you - I have done that and it worked - for one month while I have a free download. But I ultimately have to pay. I don't think it's fair to sell software, make it obsolete and then charge customers to upgrade.

Indesign CS4 files won't open in CS6

Installed CS6 on new MBP. Moved CS4 design files over to new computer.
Files won't open in CS6. Get the following message:
Cannot open "filename.indd". The file "filename.indd" is damaged (Error code: 4).
This happens with ALL of my CS4 Indesign files. (*Note: they DO open on old MBP)
I tried exporting one as IDML on old machine - same thing.
Any suggestions? I was told all older version files will open in NEW CS versions. True?

The Voodoo is in the basics. - turn it off...turn it on?
I just quit InDesign CS6 and reopened...now all of my files are opening fine in CS6!
@Bob - just to double check - moved files from old mbp - onto external hd - then brought them over to new mbp...is there a better way?

Some InDesign CS5.5 files won't open until force quit and relaunch the application (Mac) ?

Some InDesign CS5.5 files won't open until force quit and relaunch application (Mac). It seems that this occurs rarely, but once it does it on a file, it happes every time.
Any suggestions?

Is your Indesign updated to 7.5.2 ?
Where are these file saved on network or on your computer?
Are you using any font mangement software link suitcase fusion.?

How do I enable plug-ins for InDesign CS2 - files won't open

How do I enable plug-ins for InDesign CS2 - files won't open.
I own CS2.
I shouldn't have to buy CS6 InDesign.
How do I open CS 2 files and get the plug ins again.

Asking the same question over and over will not change the answer.

InDesign CS6 won't open files

InDesign CS6 won't open some files. No error message, simply returns to previous 'Open...' view. I've tried restarting, rebooting, resetting my InDesign preferences and re-unzipping the original zip file. I can still open previously worked on files, though. (Even in the second folder of unzipped files, it's the same files that I can and cannot open.) Any ideas? InDesign

EditingErin wrote:
Ooh – I just had another look to check that they are CS6 files. The are, but each file size is 0 bytes – think that may be the problem! Thanks again both for responding so quickly. :-)
That sounds like you have the resource fork for a Mac-generated .indd file. Check to see if there is another file with the same name but a real file size in the zip archive. I suspect the "real" file (the data fork) is being unzipped first, then the resource fork is overwriting without warning and you could solve it by extract9ng the files manually.

Old Applications & files won't open in OSX-Tiger/Classic

[post moved from other forum]
I finished my Powerbook's hardware upgrade with success yesterday(with thanks to JPL, Sig, A_Brody and other's great advice). System is now Powerbook G3 400 Firewire with 512mbRam, new 40GB HDD, and OS-X Tiger. However...
I can't seem to get the older Applications or their files to open. I get the error message:
"There is no default application specified to open the document Appleworks 6"
and/or
"Could not be opened because the application that created it could not be found--- could not find a translation extension with appropriate translators"
The upgrade/update procedure included...
===Back-up all files on the old 10GB HDD to an external USB drive.
===Remove old and replace w/new 40GB HDD, also install new 512MB PC-133 RAM module in lower slot.
===booted from old OS CD and ran Hard drive set-up utility with two partitions, one 30GB the other 10GB.
===Install OS 9.0.4 from that original Apple software CD onto the first 30GB partition.
===Onto same partition, ran OS-9 Update 9.1.0, then 9.2.1, then fireware update 4.1.8f5, then Update 9.2.1
===Installed OS-X Tiger onto the first 30GB partition
===Moved all backed-up files from the external USB drive onto the second 10GB partition.
I have tried running the old applications in both OS-X Classic mode and also after changing the "Start-up Disk" to the smaller partition (which should be a clone of how the original Hard drive was set-up i.e. folder structure etc.)
I'm quite surprised that when re-booting to the smaller partiton, that although it looks just like my system prior to upgrading, the apps don't run and the files don't open those older apps that created them. I assumed that the smaller Partition--and booting to it--would be the same as if the original Hard drive was still in the powerbook.
When I get those error messages above, I have followed the "Choose Application" button thru to where I could choose the application. I follow to the "Applications (Mac OS 9" folder to where the actual APPLEWORKS 6 app (for exmaple) is located, but it is greyed out and can't be selected. BTW later I did copy all of the contents of the original "Applications" folder from the backed-up HDD into the OSX "Applications Mac OS 9" folder. Also note, the apps in that folder are listed as KIND "Unix Executable File". The files (in this case AppleWorks files) are also listed as that file KIND.
===In the OSX's System Preferences/System/Classic/Advanced tab, I have tried the REBUILD DESKTOP procedure--with no effected change. I know I read elsewhere in discussions that there was a procedure to re-boot with a certain keyboard held-key combo that allows to re-build desktop upon booting?? I don't remember the keyboard combo. And,not certain how that procedure is different.
===In the change Start-Up disc Utility, I now see four Systems to choose from...
Mac OSX 10.4 on New 30GB HD
Mac OS 9.2.2 on New 30GB HD
Mac OS on Old 10GB HD (that's the smaller partition),
Mac OS 9.2.2 on New 30GB HD
Network Start-up
Both the second and forth choice will boot-up to OS 9.2, but as mentioned the apps won't run and files won't open
I'm guessing the reason the third choice won't boot (it reverts back to OSX Tiger when I try) is because that original System copy is OS 9.0.4 (backed-up prior to running the OS-9.1 and 9.2.1, 9.2.2 updates.). Also note, when in OS 9.2.2 when I go into that Utility... Apple/Control Panels/Startup Disk it doesn't list the old OS on the smaller partition. BTW could I now run/perform the OS-9 updates to bring that System on the smaller HD partition up to OS-9.2.2 with out causing problems (and maybe providing solutions?)
I wonder...
??? Why would I be having to choose which application would open an application---wouldn't an app open on its own (Unix Executable File")
??? When I moved the orig HD back-ups on the external USB drive I noticed a file with some kind of PC icon was being created within the folder. Currently I see that the file is now displayed as FINDER.DAT. Does this file relate to the error that refers to "appropriate translators"? Could the Apple Macintosh files being backed-up onto an external USB drive that may not have been formated as Apple HFS type be causing a problem?
??? Why wouldn't the smaller 10GB partition with the old HDD back-up copy moved to it not function like the original Hard drive? Particularly when I choose to boot to its SYSTEM w/Start-up Disc? BTW when I choose that route, the powerbook just boots to OSX Tiger.
THANKS for any replies, you all have been a great help with the challenges of upgrading...
MSG-PWRBkG3
PS:
Sorry for the long post. But, I have included as much up-front details as possible to assist in your replies. I also want to help others reading this thread later on as to what (correct or incorrect) procedures were followed... to help them see how these in-compatibility scenerios would be similiar to their situations... leading to solutions for all.

Thank you for including as much detail as you did. It makes it much easier to troubleshoot this type of issue. What I'll do is basically follow along with the procedure you used and point out where you (unknowingly) ran into problems.
"Back-up all files on the old 10GB HDD to an external USB drive."
Okay, I'm betting that this external USB drive was formatted as PC-Exchange/Windows format. Since this type of disk format doesn't have native support for the special "Mac" information about files (such as resource forks and HFS metadata like file type and creator codes), when Mac OS writes files to these disks, it needs to use a special method. When you copy the files from OS 9, OS 9 adds special "FINDER.DAT" files and also stores the resource-fork-parts of the original files inside a "RESOURCE.FRK" folder on the disk. My FAQ goes into more detail about this. When, from OS 9, you look at the files you just copied to the PC-formatted disk, and they appear identical to the files on your original 10 GB hard drive, that is in fact a complete illusion. The files as they exist on the PC-formatted disk are very different from what they appear. When you hook it up to your OS 9 Mac, the files appear fine, and you can copy them and have them work just like the original files did. If, on the other hand, you hook this PC-formatted hard drive up to your OS X Mac, it looks at the files in a completely different way. If you copy the files off of this disk from OS X, most of the files won't be usable.
"Remove old and replace w/new 40GB HDD, also install new 512MB PC-133 RAM module in lower slot."
"booted from old OS CD and ran Hard drive set-up utility with two partitions, one 30GB the other 10GB."
"Install OS 9.0.4 from that original Apple software CD onto the first 30GB partition."
"Onto same partition, ran OS-9 Update 9.1.0, then 9.2.1, then fireware update 4.1.8f5, then Update 9.2.1"
"Installed OS-X Tiger onto the first 30GB partition"
"Moved all backed-up files from the external USB drive onto the second 10GB partition."
If you did this from OS X, you will run into problems, whereas if you do this from OS 9, you'll be okay. The reason for this, as I mentioned above, is that OS X doesn't know how to "see" the files in the same way that OS 9 does.
This is what I would do. Make sure you still have the PC-formatted drive with the files you backed up from OS 9. Reboot into one of your versions of OS 9 that works properly. Hook up the external USB drive, and the files on it should appear properly and function properly. Now copy the files over onto your local hard drive and they should work properly as well. The files that you copied over from OS X won't be useful and can be deleted. Then reboot into OS X and you should be all set.
Hope this helps....
Dual 2.7 GHz PowerPC G5 w/ 2.5 GB RAM Mac OS X (10.4.5)

HELP! Files won't open and previously had Firefox icon instead of DW icons! Leap Year thing?

Hi! I went to update my website, which I do every night before the first day of every month and all the files had a FIrefox icon instead of the usual Dreamweaver one. I have shut down, reinstalled DW MX 2004 but the files still do not open. The icons have now changed to DW but they are not opening with right click, opening from Applications folder, double clicking the file, from get info and open with DW. I am stumped. HELP! Need to update for March 1st.
Is it something to do with Leap Year 29th Feb? Checked the clock in preferences but can't see how this affects it.
Firefox is always updated but the latest version does not seem to be as efficient as previous upgrades. We installed Chrome as well. Do they interfere with each other?

Hi Ken
I wish the 7.1 updater download had helped but it didn¹t. All the files
were backed up before the installation, which went fine.
Mac 10.5.8
We used Disc Warrior to defrag the hard drive, which did not make a
difference.
We recently started using Chrome, so now have 3 browsers in the dock,
Safari, Firefox and Chrome. Do they interfere in any way with each other?
The files, which I hadn¹t touched for a month as I update on a monthly
basis, initially had the Firefox icon.
Below is the message to send to Apple, which did not go through their report
system! A little disillusioned with the service!
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 3.06
GHz, 4 GB
Graphics: kHW_NVidiaGeForceGT130Item, NVIDIA GeForce GT 130,
spdisplays_pcie_device, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E),
Broadcom BCM43xx 1.0 (5.10.91.22)
Bluetooth: Version 2.1.9f10, 2 service, 0 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD1001FALS-40K1B0, 931.51 GB
Serial ATA Device: PIONEER DVD-RW DVRTS08
USB Device: Built-in iSight, (null) mA
USB Device: Keyboard Hub, (null) mA
USB Device: iLok, (null) mA
USB Device: Apple Optical USB Mouse, (null) mA
USB Device: Apple Keyboard, (null) mA
USB Device: Deskjet 3840, (null) mA
USB Device: BRCM2046 Hub, (null) mA
USB Device: Bluetooth USB Host Controller, (null) mA
USB Device: IR Receiver, (null) mA
FireWire Device: d2 quadra (button), LaCie, 800mbit_speed
Does not mean a thing to me.
I am not late with updating the site, which is about New Zealand culture,
month by month (www.englishteacher.co.nz). Probably only the third time I
have been late since 2005. Not a huge amount of traffic, ~300 a month and
free access to content but I would like to solve this problem.
Could a reciprocal link have caused a problem?
At my wits end.
I really appreciate the help though.
Cheers Yvonne
From: Ken Binney <[email protected]>
Reply-To: <[email protected]>
Date: Wed, 29 Feb 2012 06:42:11 -0700
To: Yvonne and Bill Hynson <[email protected]>
Subject: HELP! Files won't open and previously had Firefox
icon instead of DW icons! Leap Year thing?
Re: HELP! Files won't open and previously had Firefox icon instead of DW
icons! Leap Year thing?
created by Ken Binney <http://forums.adobe.com/people/Ken+Binney> in
Dreamweaver - View the full discussion
<http://forums.adobe.com/message/4236682#4236682>
Not necessarily related, but did you also install the 7.1
updater? http://www.adobe.com/support/dreamweaver/downloads_updaters.html
Windows or MAC?
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/4236682#4236682 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/4236682#4236682. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Dreamweaver by email
<mailto:[email protected].ad
obe.com> or at Adobe Forums
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=2240> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/message/2936746#2936746.

FCP 5.1 file won't open in FCP 7

Hi.
I am at my wits end...I have a FCP 5.1 file that I have been working on for years.
I had to upgrade to FCP 7 for reasons I won't go into and now my FCP 5.1 file won't open.
It is a file with footage from P2 cards. It has magic bullet/looks builder used throughout. I am not sure if that is the issue at one point ONE of the messages I got when it crashed (I got a few different ones at different times) was something about looksbuilder not working right.
In a nutshell, it slowly starts to open and then quits. (It gets to about 33 percent open over the course of 45 minutes and then crashes.)
The file is about half a gig and there is plenty of room on the MAC itself so it shouldn't be that the Mac is overtaxed.
I don't know what to do.
I tried opening various back-up copies, etc. because I thought maybe something was just corrupted. NONE of them open.
I tried deleting render files to limit how much it was trying to process when it opened the thing.
I even tried turning off the external drives that hold the media hoping that if it couldn't find the media it would just open the shell of a file for me and maybe I could reconnect it all later. Obviously, grasping at straws...
I am out of options. Do I just need to wipe my computer and reinstall 5.1 from scratch? That would stink because there is another project being worked on on the computer that is a FCP 7 file.
I tried putting a copy of FCP 5.1 back on the computer (so I have 7 and 5.1 on there now) to get it to open, but FCP 5.1 won't work either now (I get General Error 41 - whatever that means) Maybe you can't have two versions of FCP on the computer? Maybe it thinks it got opened in 7 so now it won't work in 5? even though it never fully opened? Guessing...
I'd appreciate any and all help. All I want to do is open the 5.1 file and save it in FCP 7 and work from there.
Thanks!
Shari

Hey Michael:
Thanks for the response. I did something similar in that I opened the file on another computer that had FCP 7 and it was fine. So I saved that. Then I went to my Mac and tried to open that file and it crashed...but it said something about Looksbuilder...so I contacted them and they had me uninstall, reinstall and then fix the preference files for Looksbuilder and it now opens.
YAY!
Thanks again,
Shari

Indesign files won't open over a network

Similar Messages

Maybe you are looking for