InDesign files won't open with double click

InDesign files won't open with double click on my MacPro with Snow Leopard although they do open from external hard drives when I double click.

Thank you very much,you were correct, it appears the mouse clicks were set too fast. Thank you very much indeed for taking the time to answer my question.
Regards,
Mag1975

Similar Messages

PDF file won't open with double click

Mac OSX 10.6.8/Acrobat 10.1.3.
Suddenly pdf files won't open with a double click, I now have to open Acrobat and file>open.
Also, once they're open, they won't close by clicking the red close dot, I now have to go to file>close.
Very frustrating!

Even reinstalling doesn't work with the standard Creative Suite installer. Except for the double-click bug, Acrobat doens't respond to dock-tasks either, like <right-mouse-click> on dock icon and select <quit>.
In this version of Acrobat, the repair function doen't seem to exist anymore. Sadly....
So the problem keeps existing, even with the laterst 10.1.4 version.
==========================
OSX 10.8 - Acrobat Pro X 10.1.4

CS2 files won't open with double clicking

Not sure what's going on here but my InDesign CS2 files don't see the InDesign application as the default. I have right-clicked and gone to "Open with ..." but get this, InDesign CS2 isn't in the application list.
OK, so I Browse to the application - no problems there, but when I select InDesign.exe and click "OK" .... it still doesn't appear in the list.
The only thing I have done recently is uninstall our old version of InDesign CS which was no longer being used.
Any ideas ? I'm stumped.

Thanks for the suggestion Mike - I ran a registry cleanup as you suggest - found a few problems as well ! However, no joy with the file association. InDesign still doesn't appear in the options list and when I browse to:
Program Files\Adobe\Adobe InDesign CS2\InDesign.exe
and select InDesign.exe, the application still doesn't appear in the list !
Any other ideas ?

Desktop files won't open with mouse click

I'm sure this has an obvious solution, but I can't find it.
(I'm on a new Powerbook G4 running Tiger)
When I try to open a folder or file on my desktop by double clicking it, nothing happens.
However, when I click once on the folder/icon to highlight it, then hit Command + O, it opens/launches.
I want to be able to open files with my touchpad without having to use the keys. Is there a setting for this?
Thanks!!!!
Powerbook G4 15" Mac OS X (10.4.1)

You might want to go into the System Preferences under "Keyboard & Mouse" and check your double-click settings. Also, if I understand correctly, to click using the trackpad itself, you can select "Clicking" under the trackpad options.
PowerBook G4 12 1.5GHz and a bag full of goodies! Mac OS X (10.4.4) 80GB HD, 512 MB ram, 300GB Maxtor OneTouch II FireWire 400 External HD.

Files, icons, docs won't open with double click

Suddenly when I double click, nothing happens. I have to use keyboard commands to open files, icons, docs, folders, etc. Did I inadvertantly set something? I have a Mighty Mouse and this was never a problem before. Thanks
Mac G5 Mac OS X (10.4.9)

Try cleaning your mouse:
Use a clean lint-free cloth lightly moistened with water. Wipe the ball and the surrounding area, making sure to rotate the ball itself to ensure complete coverage. If the scrolling feels rough or if the scroll ball isn't scrolling up, down, or side-to-side, hold the mouse upside-down and roll the ball vigorously while cleaning it to help dislodge any particles that may have collected on the internal hardware. You can also give it a good (but not too god) whack to dislodge stubborn particles.
Let us know if that helps,
Miriam

Files & Programs won't open with double click

Hello,
I'm not sure if this is a Snow Leopard problem or an iMac problem but it seems since I loaded Snow Leopard files and programs will not open if I double click on them, I have to right click then choose open. Does anyone know why this should happen.
Many thanks if somebody knows.
Mag1975

Thank you very much,you were correct, it appears the mouse clicks were set too fast. Thank you very much indeed for taking the time to answer my question.
Regards,
Mag1975

My Time Machine won't back up and files won't open when double clicked.

I'm not sure if these are related, but recently my MacBook Pro has been acting much more sluggish than usual.
To start, I have a 13in MacBook Pro Mid 2012 model with a 2.5 GHz Intel Core i5 processor and 4 GB 1600 MHz DDR3 memory. I've got it new in the summer of 2012, and haven't had any real problems until now. I have a 1TB Hitachi external hard drive with over 600GB left of storage. I'm running Yosemite.
Lately, as in the past few weeks but more noticeably the past few days, I can't open files if I just double click on them from my desktop or from searching them outside of the application. For instance, if I click on a word document on my desktop, it will cause the work icon to bounce for a while, pretending to open, but it never does. If the application is already running, the file just won't open. If I search from the "open" selection within the application, it works fine. This is true for all of my Microsoft Office apps, Photoshop, Preview, iTunes, and everything in between, all of which I had never had a problem with before.
Next, anytime I try to backup my system using Time Machine, it simply shows the "Preparing Backup" status and never starts. I've had the hard drive and used it as a Time Machine since I got the computer, and have had zero problems at all.
I've tried CleanMyMac2, Memory Clean, and I've always kept my Mac very clean and organized, as in no duplicate files, moving my biggest files onto my hard drive, and deleting any of my unnecessary files. I know I don't have a ton of RAM left, but I'm honestly not completely sure what to do about that, as this model apparently doesn't have RAM updates available.
Think you all can help?
Thanks so much.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Wrong file icons - files won't open when double-clicked

Hello,
I have a the following problem on a powerbook.
Most picture files (JPGs, but not bearing the .jpg extension) are not reckognised any more by the system.
In fact, they bear an icon of Terminal exec (a black square with a green "exec" note in the corner).
When double-clicked, they don't open in Preview any more, they act as a terminal app, and won't launch, obviously.
The only way to open them is to go the hard way : in Preview, File menu, Open...
Another way is to change their names by including the ".jpg" extensions, which seems to wake up the id from the system and place back the correct icon and app link. But we have 1000's of pictures...
Painful.
We tried rebuilding OS X desktop, repairing permissions, and update prebinding (using the excellent ToolsX 3.4). No results yet.
Any idea someone?
Thanks,
Powerbook 17 1GHz Mac OS X (10.4.3)

Have you tried selecting a picture, doing command i, for info, then in the info window setting the app for that file as Preview then clicking Change All?
Does ToolsX have a "Rebuild Launch Services database" function
or an update for "whatis" and "Locate" databases?

Master pages won't open with double click

What am I missing? I've used Indesign for years. Have CS6 now. When I double click on a master page, it won't open. This happens with old documents and with new ones as well.
Barb

I realized that I can't open anything with a double click, not just InDesign. In searching for an answer, I found an answer. When I installed a new mouse, I turned the speed on everything to high, fast, super speedy. When I slowed down the double click speed, I could open anything. Whew!
I solved the problem. If you go to System Preferences > Accessibility > Mouse and Trackpad - You can set the speed of the double click to be much slower.

Folders on desktop won't open with double click

I have just purchased a Mac Pro running 10.9.5. I downloaded from disc (external drive) several folders to my desktop, but I cannot open them with a double click (or single click). I am using an LG IPS display. Does anyone know whats going on?

Thanks. This is something I didn't know about. However, I also was able to open folders using open from the file menu in finder. Either of these is helpful sometimes, but unfortunately, I have found that I have no double click function at all - which I need for tool commands in a number of apps.
Apple support has advised me to buy a new mouse to see if the mouse is bad. So I guess I'll do that before I get any deeper into this. Thanks again.

Nothing will open with double click

Help! Our iMac seems to work OK, except that nothing will open with a double-click in Finder. It is not the mouse, which works fine. I rebuilt the directory with DiskWarrior, but that did not help. What is weird is that things do open with double-click soon after you reboot it. But after a day or so, it stops working. Any ideas?
Thanks,
Carlos

Hi Carlos!
It maybe your Mouse or your Mouse Preferences are getting lost somewhere. What type of Mouse do your have? When you lose the ability to double click, can you still right click and see the menu dialog? If so, try to open your file this way, if nothing happens when you right click try the next step below...
You should check: System Preferences > Keyboard & Mouse > Mouse... from here make sure you right (secondary) button is activated and double click speed is not too fast or slow.
Let us know, good luck, Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - WD 500G FW - Mac OS X (10.4.8) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620 Kodak P880

2013 excel won't open when double clicked

Hello,
I am using window's 7. I am having an issue with excel. An excel file will not open when double clicked.
Thank you,

Hi,
Does this issue happen to a certain Excel file or all Excel files?
If this only happen to a certain Excel file, where is the file stored? We may try to open a blank Excel file, and then open the certain Excel file via File > Open and then navigate to the file to see the result.
If this issue happens to all Excel files, please go to Task Manager, click Processes tab and make sure Excel.exe is not listed there. If Excel.exe is listed, end the process and then try to opening Excel file to see the result.
If above doesn't fix the issue, we may also try to
run a repair of your Office installation to see the result. It seems that the method fixed a similar issue for a number of users according to another thread.
Please have a try and let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Events will not open with double click/double click not working.

Have just upgraded to iPhoto'11 and finding it a pain to use after previous iPhoto. Events will not open with double click (even though highlighted in yellow) and photos will not open with double click or videos play. How can we fix this please?

That sounds very like an issue with your mouse/trackpad and not iPhoto. Go to your SystemPreferences and chck the speed you've set for double clicking
Regards
TD

I deleted adobe and now files won't open with preview automatically like they use to. How do I fix this?

I deleted adobe and now files won't open with preview automatically like they use to. How do I fix this?

I think you solved my problem! Upon following your advice, I first got a message that I had not allowed a connection to the Tax dept computers, which would prevent the file I need to fill out from being e-filed. I proceeded to then open the file at the top of which was a security banner at which I chose the site as safe. I then filled in the first line of the form which autofilled other lines telling me I was connected with the tax site. In a few days when I have the data I need, I will actually attempt to file the return. If there is a problem, I will send another message. Thanks so much for your assistance!

Icon won't open via double click

For months,have several icons on right side of screen. Until a few hours ago, could open these icons with double click. Now, must first highlight icon, then go to Finder/File/Open to Open. Don't know why these icons "froze". Annoying! Help!

First of all, have you tried restarting? If you've laready done that, navigate to ~(yourHome)/Library/Preferences and trash these two files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then log out and back in again. Or restart.
(You will have to reset a few finder prefs the way you like them.)
Let us know.
-mj
[email protected]

InDesign files won't open with double click

Similar Messages

Maybe you are looking for