InDesign : importation hyperliens depuis fichier .DOC

Bonjour,
J'ai un fichier Word (doc ou docx) que je dois importer dans InDesign CC ou CC2014 (mais que je ne peux pas joindre sur le forum).
Les hyperliens "web" sont importés normalement et apparaissent correctement dans la palette Hyperliens.
Par-contre les hyperliens "internes au document" ne sont pas convertis correctement, les liens sur les textes sont perdus, et les destinations arrivent sous forme de "signets", visibles dans le panneau Signets.
J'ai essayé plusieurs options d'importation mais il n'y en a qu'une seule pour les liens, il n'y a pas de détail…
Est-ce que c'est un comportement normal ?
Sinon, comment faire pour récupérer ces "liens internes" dans InDesign ?

Merci de ton offre mais non, hélas je ne peux pas envoyer ce fichier sous quelque forme que ce soit.
C'est juste un "bête" document Word de 90 pages environ avec des "liens internes" du type mot-clé ==> définition.
Entretemps j'ai eu un avis d'expert : Branislav M. m'a tweeté qu'il n'était pas possible de récupérer les "liens internes" d'un fichier Word dans InDesign.
Alors pour le coup j'ai décidé de faire autrement, mais je trouve cette limitation curieuse et je me demande s'il n'y aurait pas une manip préalable à effectuer dans Word…
Je reste preneur de toute info.

Similar Messages

Créer un fichier Indesign à partir de plusieurs fichiers formant des chapitres d'un livre déjà créé

comment faire pour créer un seul fichier Indesign à partir de plusieurs fichiers (198 fichiers) rassemblés dans un livre Indesign afin de pouvoir exporter un seul fichier e.pub.
J'utilise Indesign CC

Bonjour Jmlevy, je réduit le format de mon fichier car lorsque je l'importe sur id, le format est immense par rapport à mon document et la résolution est trés mauvaise, donc je vais dans affichage qualité supérieure pour que mon image soit nette, et ensuite je clique droit, ajustement, et ajuster le contenu proportionnellement afin que la créa de la carte de visite qui à été faite sur AI soit au bon format sur ID.
L'impression correspond à ce que je vois sur l'écran mais par contre elle ne correspond pas à mes cartes de visites déjà imprimées par un professionnel.
Exemple :
1. carte de visite initiale : bords = 5mm
2. carte de visite faite sur id : bords = 2CM (pourtant les traits de coupes et bords perdus sont réglés sur 5mm)
Je n'arrive pas à trouver l'erreur que j'ai pu faire...
Merci pour l'info concernant le forum français.

Good afternoon. I have created a Form in Indesign, imported into FormsCentral. I would like to post this onto a webpage. It is currently an iPDF. How would I go about doing this. I cannot 'Place it'. Thanks

Good afternoon.
I have created a Form in Indesign, imported into FormsCentral.
I would like to post this onto a webpage. It is currently an iPDF.
How would I go about doing this. I cannot 'Place it'.
Thanks

The only way to use Forms Central would be to export it the method that gives you the embed code (can't remember what the actual term is off hand) and then use Object--->Insert HTML and past your code in.

Importing images in Word Doc

My colleague recently had Office 2007 installed, then RH 7.
She started a new project and imported a Word *.docx file. RH
did everything I expect it to do except for this:
The images do not appear in the topics. It creates a separate
project manager folder for the images, as I expect it to do.
However, the folder seems to contain nothing. Normally, I
would expect to see images listed there. They aren't in the top
directory as baggage files, either. They are in .gif and .jpg
formats.
The images do show up in the project's Windows directory, in
the new folder corresponding to the "empty" directory in project
manager. The Unused Files report finds them.
I can't figure out what my colleague may have done when built
the Word .doc -- nothing any different from what I usually do --
that could explain this. Saving it as .docx or as .doc makes no
difference. Converting it from .docx to .doc doesn't fix it. The
import goes exactly the same on my two PCs. One runs Office 2007
and RH 7. The other runs Word 2003 and RH 7. Of course, .docx won't
run in the latter environment. Any .docx or .doc files that I built
work fine.
I found two workarounds, but first I'd really like to know
what conditions in her Word files would cause RH to do this. Has
anyone seen it, and is there a simple way to fix the Word doc?
Otherwise these are her options:
Option 1. Create a new Word document in Word 2007 and insert
the complete original file (the new Word menu moved this to Insert
> Object > Text from File). Save the new file as .doc or
.docx. Import the new file into RH 7. Images appear in the topics
and in the project manager under a new folder. (Copy all and paste
into the new Word doc also works.)
She has several large Word documents to deal with, so this is
less than ideal.
Option 2. In the new topics in RH, insert the images where
they belong. While they don't appear in the project manager, the
insert image dialog finds them. After we insert an image, RH shows
it in the project manager. Probably, this would take longer than
Option 1.
Any ideas?
Harvey

Next time you have trouble importing a legacy Word .doc, try
this:
In Word, create a new file using the New command and the
default .dot.
Insert the contents of the legacy .doc from the menu command
(not by cutting and pasting).
In Word 7, they moved the "insert file" command to Insert
> Object > Text from File . . .
I'd think "insert text from file" would mean pasting
something that doesn't include graphics. However, Word will bring
in everything from the legacy .doc including formatting and styles.
Save As . . . the new document as .doc or .docx. I don't
think RH 7 cares. In our experience, jpegs and gifs sometimes were
missing until we created the new Word file.
Another wrinkle: In Explorer view, with a folder open, File
> New allows you to create an empty Word document right there.
We had some trouble using one of these for importing and saving the
legacy .doc.
Didn't have time to track it down. Was the legacy .doc
created in Word 2003, and the conversion to .docx in 2007 glitched
some images? In your case, it just happened to the .png files? As
you previously speculated, images may have been handled differently
in creating the original .doc.
My hypothesis here is, whatever the reason for images getting
lost in the import to Word, everything gets fixed -- even for pngs
-- when you start with a clean slate in a new Word document created
from the New menu in Word.
Harvey

InDesign - PDF • Noms de fichiers différents

Bonjour,
Voici mon problème :
Quand je fais un PDF à partir d'un fichier InDesign, le nom par défaut du PDF est différent du nom du fichier InDesign. Cela n'est pas toujours le cas, mais souvent il prend le nom d'un autre fichier. Ayant des noms de fichiers InDesign un peu complexes, j'aimerai trouver une solution pour qu'à la création des PDF le nom du fichier PDF soit rigoureusement identique à celui du fichier InDesign.
Merci d'avance pour vos réponses.

Lors du premier export d'un fichier InDesign, le nom du fichier exporté prend automatiquement le nom du fichier InDesign, mais il suffit qu'une seule fois, on ait donné un autre nom au fichier exporté pour que ce soit ce nom qui persiste. Énervant, mais c'est comme ça…

Is it possible to import fast a word.doc into Indesign

Hallo,
I am producing department documents. Now I have some problems because I created them in word from microsoft.
Is it possible to import the word documents into the indesign format in an easy way?
It should be time safing and effective.
I would be glad for some answers!
best wishes

The way you move word dodument s into InDesign is by using File > Place..., selecting the word file in the dialog, chooing import options if you like, and clicking the cursor in the InDesign document. How you've set upt he ID file will have a lot to so with wher you should click and whether or not you should be also pressing the Shift key to autoflow.
It's quite clear you have no idea how InDesign works, so before you get into trouble you should look around for some books or tutorials, and try reading the help files. One of the best books out there for new users is Sandee Cohen's Visual QuickStart Guide to InDesign.

Is it possible to import a .pdf or .doc file into DVD studio Pro 4?

When I finally finish my 2D animation for my Senior Project and finally make the DVD, I want to include the short story that the animation is based on to the DVD. I want to import it as .pdf or a .doc into DVD Studio Pro 4. What I want to know is, is if this is possible, or if is not, is there another acceptable file format that I can use if .pdf or .doc isn't possible?
Message was edited by: obisgirl

Techincally you can create a link to take it to the file... but there are so many different software DVD players that it doesnt work with 90% of them so its pointless..
as for including your files on the DVD....
First make sure your files are all in one folder called DVD Content or something like that so they know its in that location
then in DVDSP at the top where all the icons are...
hit build and format.
in the general tab you will see...
Disc
Source
DVD-ROM Data
destination
under DVD-ROM Data check the content box.
Choose the folder you have all your files in.
joliet extension support doesnt really matter but i always click it so that windows can identify better what file format it is.
then continue building and formating.
let me know if that works or if you run into an issue.

Import Glossary from Word Doc?

Hello!
Is it possible to import the contents of a Word doc into a
project's glossary, rather than having to create from scratch
and/or cutting & pasting into the Glossary?
I saw nothing about this in LiveDocs or the Forum...
If I have a Word doc, what styles should be applied to the
term and to the definition?
Thanks in advance!
Kathy

Hi Kathy
Yes, it's possible. However, keep in mind that the Glossary
file exists as a simple ASCII text file. Thus, no formatting is
allowed. I might suggest the following approach:
Add a single term to the Glossary using RoboHelp. Then sneak
behind the scenes and open the ProjectName.GLO file with Windows
Notepad. Note the structure. Now format the text in your Word
document to follow the example you just looked at. You could then
select it all, copy and paste into the .GLO file.
Cheers... Rick

Can InDesign import a CAPS file?

I work for a phonebook company, and they keep their data in an antiquated program that only supports Quark. The program can export data for page layout as a .DTG file that they give us a proprietary Quark extension for, so that the tags are read and formatting is applied as the text comes in. But their program can also export something called a CAPS file, which seems to be a simple text file with characters in front of the data to call up style sheets. There is a number and then a tag that corresponds with our UDACs. (UDACs are the names for the different categories of directory listings.) Does InDesign have a filter for importing a CAPS file, that can read these simple tags and apply formatting? Or, is there perhaps a third-party application that would do this? I would like to kiss Quark goodbye.
Thanks.

I've never heard of CAPS, but Indesign can certainly import a text file.
And if the text is coded, you can then search and replace the codes with
styles or formatting. If the routine is the same every time, it could be
scripted. Or you could just save your Find/Changes. Or you could bring
your DTG file into Quark, save as Quark 4, and then open the Quark file
in Indesign.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Indesign CS6 crashes when opening docs

Hello,
since upgrading our macs to OSX 10.9 & Adobe CS6 we have strange crashes of Indesign. It´s hard to reproduce because it happens irregular ...mostly when switching between programs and opening an ID-doc afterwards. Without switching to other programms we can work for hours!
I read a lot in different forums, so tried every possibility i can imagine:
- new, clean install
- cleaning fonts/caches
- deleting preferences
Please help me, perhaps these crash-reports can tell you anything...
Indesign Crash - Pastebin.com
Indesign Crash2 - Pastebin.com
But mostly there is no crash-report, because ID isn´t crashing ...it´s just hanging with the spinning ball?! In activity monitor i can see: the system-error counter (screenshot) is getting more and more errors... but my console.app says nothing?! where is this system-error logged?

Try disabling the plugins through the Extension Manager and see if InDesign works as normal.
http://www.google.ie/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=0CDoQFjAG&url=http%3A%2F %2Fhelpx.adobe.com%2Fpdf%2Fext…

How to import .E60 files(ABAP Doc 2.1)

the readme file says:
"Ask your BASIS consultant to import these files to your SAP development system. "
files:K901003.E60
R901003.E60
I don't know how to import,can anyone tell me ?thanks!

thanks for your reply,
I did what you say step one,
but the step two I can't find the path,
and the readme file says:
Since ABAP Docs is a development tool for ABAP developers, it should be installed only on the SAP development box. There is no need to move it to SAP Q&A and production systems.
so,is it need to do step two:"Now login to sap level go to STMS -> Extras -> Add request -> enter the request and import"?
thanks !

Import wizard dll --- fichier .h ( demo en ligne ) ---

bonjour, j'ai visioner la démo d'utilisation du gestionnaire de dll dans labview 8.2 ( version de d'évaluation )
( import dll...)
J'ai essayé avec une dll d'une application ( free ) , mais il faut y joindre un fichier en-tête *.h
J'comprend pas trop a quoi sert ce fichier *.h et surtout ou le trouver par rapport à une dll qu'on veut utiliser
Faut-il le créer, ? comment ? quel nom ?
Pouvez vous m'aider
Merci

mouais, j'ai fini par trouvé

Indesign CS4 Crashing with one doc only

My Indesign CS4 crashes with only one document (my most valuable document, of course). It does not crash with other small docs.
The exact problem occurs on two Intel Macs (Mac Pro 6gb of Ram and MacBook Pro with 2gb of Ram): The doc opens for about 5 seconds then the ball starts spinning and I need to force quit.
I did change fonts for the document a few days before the problem began, so if anyone has suggestions how to diagnose corrupt fonts, please let me know.
If anyone has suggestions on how to recover my document, please guess away.
Many Thanks.

I finally was able to recover a backup copy that was 2 days old. I am happy with this as I thought I was having to go back 2 weeks.
I recovered it by continuously opening and force quitting every backup I had over and over, then attempting a save-as.
One thing I noticed is that Indesign automatically opens up previously opened documents even if it crashed. This creates a loop that was tricky to work around as Indesign would even with a good doc opened. It would open the corrupt doc at the same time causing a crash.
My lesson is to rename the document backup every day (not use the same name), and back up on a secondary drive. Thus, if this happens again the worst thing that will happen is that I lose only 1 days of work.

Unable to import pptx or other docs in to my iPhone & iPad

I'have bad experience to import pptx, excel on my iPhone & iPad, I've got this problem before and after IOS upgrade to 6.0.1, I've tried usig iTunes, Dropbox or sending the docs as attach on the e-mail, when key notes are at 99% of the importing table, it crash.
Does anybody can help me?
Tks in advance
Andrea

I tried them but they did not work for me. The loading symbol kept spinning until it timed out. Plus it also stalled my connection.
The problem goes just beyond YouTube videos. I'm still unable to watch videos embedded in websites, such as the tutorials on apple.com.
Anyone know why this might be happening?

Initialisation commande numérique depuis fichier txt

Bonjour,
Dans le cas d'un système simple de filtrage,
Je réalise un enregistrement de paramètre en format txt.
Je réinitialise mes variables (globales) avec le même fichier précédemment enregistré.
Il m'est donc possible de modifier les valeurs de mes paramètres directement depuis mon fichier txt.
Problème: Je voudrais également pouvoir modifier mes paramètres depuis ma face avant en les ayant au préalable initialiser avec mon fichier txt.
Comment puis-je faire cela?
merci d'avance.
Seconde question:
Je voudrais insérer le graph d'un sous VI dans la face avant de mon VI principale sans passer cette indicateur comme paramètre de sortie dans le connecteur.
Que dois-je faire?

Bonjour,
Pour la gestion d'un RS-232 série depuis LabVIEW, ce sera vraissemblablement au travers de la la palette E/S Instruments » NI-VISA. Dans la palette avancé, il existe une fonction VISA Write From File, qui pourrait convenir (lecture en mode binaire). Si ça ne convient pas, un petit traitement sera nécessaire. Tout dépend de la façon dont sera édité le fichier en question, i.e directement depuis l'application LabVIEW qui enverra le texte/le fichier, ou depuis votre éditeur texte favori (j'ai une préférence pour notepad++)
Cordialement,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
  CTD - Certified TestStand Developer / Développeur TestStand Certifié
  CLAD - Certified LabVIEW Associate Developer

InDesign : importation hyperliens depuis fichier .DOC

Similar Messages

Maybe you are looking for