InDesign Server CS 6 and Mac OSX 10.9.1.

After upgrading my Mac to OSX 10.9.1 my InDesign Server CS 6 refuses to start. In the terminal the next error pops up:
Error loading /Users/jvenderb/Library/ScriptingAdditions/XSLT Tools.osax/Contents/MacOS/XSLT Tools: dlopen(/Users/jvenderb/Library/ScriptingAdditions/XSLT Tools.osax/Contents/MacOS/XSLT Tools, 262): Symbol not found: __ZN3icu13UnicodeStringC1Ev
Referenced from: /Users/jvenderb/Library/ScriptingAdditions/XSLT Tools.osax/Contents/MacOS/XSLT Tools
Expected in: /usr/lib/libicucore.A.dylib
InDesignServer: OpenScripting.framework - scripting addition "/Users/jvenderb/Library/ScriptingAdditions/XSLT Tools.osax" declares no loadable handlers.
Any idea?
PS: InDesign CS 6 (so not the server edition) does start normally.

Very few InDesign Server users here.
Better to ask in the InDesign Server Developers forum:
InDesign Server Developers

Similar Messages

Adobe Reader 9 and Mac OSX 10.5 - FDF Issue

I have an issue that only happens when using Adobe Reader 9 and Mac OSX 10.5.
When submitting a form from within a PDF, the FDF that gets sent is completely blank.
Tested on Mac OSX 10.4 with Adobe Reader 9 - no issue
Tested on Mac OSX 10.5 with Adobe Reader 8 - no issue
Tested on Mac OSC 10.5 with Adobe Professional 8 - no issue
It only seems to be a combination of OSX 10.5 and Reader 9. Does anyone have any clue about the settings of these two and what might be happening?
Any help is greatly appreciated.

Mac OS 10.4.11: I could not open pdf docs today (12-24-08), uninstalled & installed Adobe Reader 9.0.0. pdf docs icons changed but open, however cannot open Reader from Applications and get: Adobe Reader
Version 9.0.0
Installing/fixing installation
Then immediately get this error message:
Adobe Reader could not install correctly.
Adobe Reader was unable to install a necessary component
and must quit.
Any help out there for me?
Thanks, Tony

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

HT201260 my mac mini build is 11G56 and mac osx is 10.7.5 how can i install latest mac 10.8 and above

my mac mini build is 11G56 and mac osx is 10.7.5 how can i install latest mac 10.8 and above

Simply purchase Mountain Lion from the App Store and it will begin installation after the download is complete. Note that it's a large download, about 4.5GB, so you should have a good Internet connection..
However... if I were you, I would just wait another month or so until Apple releases Mavericks - the 'latest' announced version of OS X -> http://www.apple.com/osx/preview/.
No need to pay for two upgrades in a months (or so) time...
Clinton

Help in identifying best available development framework and language for native app development for Windows and mac osx desktops through single code base

Hi Guys
i am try to identify the right development framework and technology for developing GUI application which can run on windows and mac osx.
i am sure that there will be specific handling for both of these os, but at the same time there could lot of code can be same.
is it possible to fulfill requirements of both these OS's through single code base. As of now i am more experienced with Dotnet C# on windows.
Regards
Mukesh Vashisth

Just wanted to quickly confirm
before i dive into xamarian.
Is Xamerian can be Used to build applications for MAC and Windows PC along with mobile devices.

Anyone having problems with AirPrint HP 5520 and Mac OSX 10.8.2

Hi guys,
I just bought my new Mini and my second HP Wireless printer.
For some reason it does not connect to any of my devices. I have installed all updates, added the printer many times to my network etc.
When I start my HP laptop is does work perfect to print wireless - but I am unable to find the printer with my iPhone, iPad or Mac Mini. Anyone having an idea what to do?
I also configured the printer on Mac OSx many times..
Regards!

You can check the Net log in the Web Console (Web Developer > Web Console;Ctrl+Shift+K) console to see if there are errors with retrieving files.
You need reload the web pages and bypass the cache to refresh possibly outdated or corrupted files from the server.
*Press and hold Shift and left-click the Reload button.
*Press "Command + Shift + R" (MAC)
See also:
*https://developer.mozilla.org/en/Tools/Web_Console

IChat Server - Moving from one Mac OSX 10.5 server to another

Hi
I have found and read several posts about migrating Mac OSX 10.4 iChat to Mac OSX 10.5, but that's not quite what I want to do. I have deployed a new Xserve on our network and have moved/migrated all services from my old Mac OSX 10.5 server to the new unit now, with the exception of iChat.
Does anyone know how I can move all of my existing users/settings across from one server to another? I don't really want to have to recreate all the set-up on the new server and it would be much easier if there was a way of moving the iChat Server from one server to another. iChat seems to install itself in lots of places on 10.5 server and I suppose I'm looking for somebody who can tell me which files/folders need to be moved over to the new unit in order for it to work.
Thanks in advance.
Paul

Paul,
stop the ichat server on both machines using:
sudo launchctl unload /System/Library/LaunchDaemons/org.jabber.jabberd.plist
make a backup of /etc/jabberd, /var/jabberd on the target machine
copy the contents of the directories /etc/jabberd and /var/jabberd from the source machine to the destination machine, ensuring that owners and file permissions are maintained.
restart the ichat server on the target machine thus:
sudo launchctl load /System/Library/LaunchDaemons/org.jabber.jabberd.plist
and it should work. I say should 'cos I have never actually had a reason to do this, but there is no reason I can see that this will not work.
Note that this assumes that the user community (names) on the target machine are the same as the source, certificates if you use them are in the same place and, I guess it should go without saying, but the name of the ichat server and DNS names are the same. Note that DNS must be correct and pointing to the target machine.

InDesign CS5 crashes on startup - Mac OSX Lion

Hi Everyone,
I've reinstalled InDesign, Photoshop and Illustrator CS5 after upgrading to Mac OSX Lion,
Photoshop and Illustrator work fine but InDesign crashes on startup.
I've followed a few threads on here, one suggested creating a new adimistrator-level user on my machine - and that works, but I can't figure out what to fix in my regular user to make InDesign work in here again...
This is the error report I'm getting:
http://pastebin.com/a2LrMFdw
Help, anyone?
Thanks a lot!

I'm having a similar problem but I haven't been able to get it to work. I created a new administer level user but InDesign still won't open under that user. I've tried the other suggestions as well with no success. Please help!!!! It really doesn't help that I'm in South East Asia traveling with no fast internet to be found. :\
Here is my error log.
Process:         Adobe InDesign CS5 [577]
Path:            /Applications/Adobe InDesign CS5/Adobe InDesign CS5.app/Contents/MacOS/Adobe InDesign CS5
Identifier:      com.adobe.InDesign
Version:         7.0.4.553 (7040)
Code Type:       X86 (Native)
Parent Process: launchd [147]
Date/Time:       2012-07-12 21:55:35.933 +0800
OS Version:      Mac OS X 10.7.4 (11E53)
Report Version: 9
Interval Since Last Report:          20606 sec
Crashes Since Last Report:           25
Per-App Interval Since Last Report: 196 sec
Per-App Crashes Since Last Report:   24
Anonymous UUID:                      58257A2C-0EFE-4E84-8072-82BBE442858B
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000034
VM Regions Near 0x34:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Applications/Adobe InDesign CS5/Adobe InDesign CS5.app/Contents/MacOS/Adobe InDesign CS5
    __TEXT                 0000000000001000-0000000000005000 [   16K] r-x/rwx SM=COW /Applications/Adobe InDesign CS5/Adobe InDesign CS5.app/Contents/MacOS/Adobe InDesign CS5
Application Specific Information:
objc[577]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   dyld                                    0x8fe3a482 ImageLoader::isLinked() const + 6
1   dyld                                    0x8fe3886a NSLinkModule + 86
2   libdyld.dylib                           0x94a12622 NSLinkModule + 88
3   com.adobe.InDesign.Font Manager          0x10200bc8 TINglue_version + 792
4   com.adobe.InDesign.Font Manager          0x102015cf TIN_Startup + 177
5   com.adobe.InDesign.Font Manager          0x10187109 GetPlugIn + 17705
6   ObjectModelLib.dylib                    0x010511b1 0x1038000 + 102833
7   ObjectModelLib.dylib                    0x01051acb 0x1038000 + 105163
8   ObjectModelLib.dylib                    0x01060386 0x1038000 + 164742
9   ObjectModelLib.dylib                    0x01070c0d ShuksanInit(IStartupScreen* (*)(), IPlugIn*) + 23101
10 ObjectModelLib.dylib                    0x0106c234 ShuksanInit(IStartupScreen* (*)(), IPlugIn*) + 4196
11 com.adobe.InDesign                      0x00002822 main + 82
12 com.adobe.InDesign                      0x000027a6 start + 54
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib                  0x9cf1390a kevent + 10
1   libdispatch.dylib                       0x93f54e10 _dispatch_mgr_invoke + 969
2   libdispatch.dylib                       0x93f5385f _dispatch_mgr_thread + 53
Thread 2:
0   libsystem_kernel.dylib                  0x9cf1283e __psynch_cvwait + 10
1   libsystem_c.dylib                       0x998d6e78 _pthread_cond_wait + 914
2   libsystem_c.dylib                       0x998d6f7b pthread_cond_timedwait_relative_np + 47
3   com.apple.CoreServices.CarbonCore          0x9bba23a7 TSWaitOnConditionTimedRelative + 178
4   com.apple.CoreServices.CarbonCore          0x9bc0467f MPWaitOnQueue + 200
5   PMRuntime.dylib                         0x00014130 MemUtils::GetAvailMem() + 288
6   com.apple.CoreServices.CarbonCore          0x9bc055e0 PrivateMPEntryPoint + 68
7   libsystem_c.dylib                       0x998d2ed9 _pthread_start + 335
8   libsystem_c.dylib                       0x998d66de thread_start + 34
Thread 3:
0   libsystem_kernel.dylib                  0x9cf1302e __workq_kernreturn + 10
1   libsystem_c.dylib                       0x998d4ccf _pthread_wqthread + 773
2   libsystem_c.dylib                       0x998d66fe start_wqthread + 30

How do I get Windows's off my MacBook and Mac osx back on?

I purchased a MacBook (A1181) off eBay "for parts" but the only thing it needed was a new battery. I turned it on and everything worked fine, only problem is that it's running Windows 7 professional and is password protected. When I contacted the eBay seller they said the Mac was supposed to be wiped clean and they could not help me because it was sold "for parts." I cannot log in to wipe and I don't have any original discs or any Mac osx discs. I want windows off and a fresh copy or snow leopard on my MacBook. PLEASE HELP

You can use a Snow Leopard retail install disk to erase the drive and install 10.6 Snow Leopard.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
You can now follow the instructions on the install screen

Photosmart D110a Wireless Troubleshooting with D-Link DIR-655 and Mac OSX 10.8

Good evening all,
Apologizes if this has already been posted. I've googled this issue a couple of times, but I still haven't found a solution for this problem.
I have the Photosmart D110a and I'm running Mac OSX Mountain Lion, and my router is a D-Link DIR-655 and my security is WPA-Personal and the router is running in 802.11gn mode. My ISP is Optimum Online.
The issue that I've been having is that the printer works wireless when everything has been recently booted up. As does the scanner. However, if it hasnt been used for a while, the printer shows up in the OSX Print & Scan settings page as idle, but when I try to print, the dialog just says "looking for printer" and never finds it, and just says "The printer is not connected" under the item in the OSX Print Queue. Because of this, I have to restart the computer or restart the printer for them to find each other again.
I've seen other solutions on here, such as giving the printer a static IP address, and this hasn't worked either. The printer is still accessible with the static IP address, which means it's still got a connection to my network, but for some reason the OS isn't recognizing it or something.
It's obvious that the printer works when everything is freshly rebooted, but I still haven't been able to figure out this issue once it's been idle for a while.
Any help would be greatly appreciated!!
Errold

Hi,
Try following my post below, I believe it might be relevant as the router drops the Bonjour connection:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/losing-connection-to-airprint-a-few-min...
I would also suggest updating your router's firmware and check if that may help:
http://www.dlink.com/us/en/support/product/dir-655-wireless-n-gigabit-router
For any help with this proccess I would highly recommend contacting Dlink support.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

IPhone not updating due to lack of iTunes and Mac OSX update

Hello,
I have an iPhone 3GS running software version 4.1 and am needing to update it to the next version. When I click on the 'update' button when the phone is connected to my MacBook, a window pops up that says 'This version of iTunes (9.2.1) is the current version'. I realize that iTunes needs to be updated as well, but in order to do that I need a different version of Mac OSX. I have an older MacBook and am currently running Mac OSX 10.4.11
My question is: is the only way to update my iPhone at this point to purchase the OSX Leopard 10.5? I seem to be caught in a dilemna of not having the most up-to-date software on my computer, but I wish it didn't effect my iPhone performance.
Any information would be helpful. Thank you!

You can upgrade the MacBook directly to Snow Leopard for $29.00
<http://store.apple.com/us/product/MACOS_XSNGL>

Safari 3.1. and Mac OSX 10.5.3

Hi everybody,
I accidentaly dumped Safari from my system because I never used it and I didn't like it very much. anyway, I am using Opera but to set Opera as my default Browser I need Safari to change this setting. So I downloaded the new 3.1. Safari version but wasn't able to install it. I got the message that I need Mac OSX 10.2. or newer (wich I already have). So I tried to install the Tiger version as well (out of curiosity) but it didn't work either. Afterwards I was browsing through the threads in this forum and tried all the other suggestions I found, like:
Installing the Safari 2.1. version from the install disk that came with my PBP. I was able to install it but when I tried to launch it I got the message that I cannot use this safari version with my Mac OSX version. And Software Update doesn't mention any Updates for Safari although an older version is installed.
After that I downloaded Pacifist, repaired my permissions with disk utillity, re-downloaded the Safari 3.1 package and tried to install it via Pacifist. The .pkg file was a zero-byte file and whe I marked every file in the package, and clicked on the install button it seemed to work. I was asked for my admin password and wether I want to replace all the files connected to safari. I said yes (like mentioned in another thread in this forum). I quit Pacifist, logged out and in again but Safari is still missing. If I search for safari using spotlight, the only thing that shows up is the .dmg file.
Does anyone have further suggestions??? I'd really appreciate it.
I am really annoyed about all that and I don't understand how Apple can release a new version of their browser wich is incompatible with their new MAC OSX version...

Try this:
Go to /Library/Receipts and look for an item named Safari311Upd.pkg or something similar, and Trash it (don't empty the Trash yet).
Decompress the Safari 311.dmg file by double-clicking on it. When it's done, open the mounted disk image (if it doesn't open automatically) and drag the pkg file to your Desktop. When it's done copying, close the mounted disk image.
Launch Pacifist and open that package that's on your desktop. Click once on the top package icon in the Pacifist window and then choose Install from the menu, and be sure to replace all items related to Safari that it may find. When it's done, try launching Safari and post back with what happens. If everything is fine again, then you can Empty your Trash.
As for Apple releasing a version of Safari that's not compatible with 10.5.3, that's not the case at all. It is entirely compatible; the fact that the OS is claiming something that doesn't make sense to you is not an indication that it doesn't work or isn't compatible.
Mulder

JS InDesign Server CS2 - Search and Replace

I am struggling to get a search and replace script to work on InDesign Server CS2.
This works on my Desktop CS2:
app.documents[0].search('xxx', false, false, 'yyy');
but not through InDesign Server CS2.
Can any one please help.
Thanks
Simon Kemp

Thanks for all of the replies.
This situation is that the company I work for has decided to consolidate some of the duties of our graphics departments. People in one location will be dummying documents for people at another location.
The paths to the images are UNC paths, which means they're pointing to different shares on different servers. This cannot be changed.
Also, the images at either location may not exist until days after the dumming process.
During the dummying process, the application that's used to build the pages places empty ad boxes (placeholders) on the page. The placeholders are text frames.
I don't understand in what way, but the paths to the images are hidden inside the InDesign file. From the users' standpoint, the placeholders simply display basic information about the ad (customer name, ad number, etc.) and hold the position for the images that will be placed later.
It is not using script labels to apply the paths.
So, this is why I describe the problem as needing to do a search and replace inside the InDesign file.
As I mentioned before, I know this is doable. I think I now see that the problem problem is figuring out how these hidden paths are being applied in the document. My only thought was script labels, but this is not the case...

Mainstage 2.2.1 and MAC OSX Lion update 10.7.4 CRASH!

hello there.
I'm dealing with an issue with mainstage and the last update from apple's OS, 10.7.4. The mainstage software (witch is intended for live - and steady - use) is crashing often after the OS update. I'm a professional musician and last night a had the third gig in a row with several problems with my setup. Mainstage starts behaving very strangely, a white intermitent bar appears in both sides of the section with the CPU usage and other infos in the top of the edit window. Then i suddenly can't change preset nor patches. the octaves are wrong and the sounds too. then comes the "rolling ball of mac" anouncing something really wrong. After the first time it happened and mainstage crash until closed, i managed to reopen it in the middle of the gigs... it was very stressing and frustrating.
before the last show, yesterday, I searched for answers in forums and here I found that maybe installing the update from appstore would end this issues. so I did, even being an owner of the logic bundle witch came with mainstage, and paid 29 dollars for the software again. the install was alright but the problems remain (actually it was the worst scenario in a gig for me ever...)
PLEASE HELP! i'm a recent user of the mac system, i have late 2009 macbook pro with mainstage 2.2.1 running mac OSX 10.7.4.
I cant afford having this kind of issues in the middle of my job! this become a real problem for me!
in case anyone would ask, NO, i haven't made a time machine backup in order to roll back the OS. my bad.
thanks,
piero

Its disconcerting to say the least to see that last post by SmithBurg was one year ago. Disconcerting because there didnt appear to be a clear cut solution to an issue that seems to be happening to many users in that for whatever user's MS setups were doing at the time, the end result is that the program quits "unexpectantly" during a show.
I had been using MS originally on a late 2009 MB pro, and as my patches evolved, I started having several issues which would quit MS.
I did find what seemed to be a solution by reinstalling the OS to 10.6.8, and and new "unclogged" system seemed to fix the issue. HOWEVER....a few months later and it "quit unexpectantly" in the middle of a show, or I couldnt get my focusrite scarlet 8i6 inteface to work in preferences...(had to use the MB pro minijack out!!   Which was very noisy with the power supply and I do NEED the power supply for a 4 hour show (that old banana)
I digress......
So, i think my laptop has had its day with all the issues id been having, and I go out 2 months ago and buy Apple's flagship macbook pro for $4200, with the idea that the ultra high specs of the laptop should do the trick.
MS reinstalled....I dont use 3rd party plugs as im content with MS sounds, (although i did install kontact to try out and it was far too memory intensive, so dont actually use it.
So for 1 month I play various shows with no issues. I have not changes the setup at all EXCEPT adding one patch that I made.
Then one gig last month it happens again. I'm flabbergasted now.      "MS quit unexpectantly" but I DONT have wi-fi connected at the random venue, and CANT send apple the error report.
My only choice is to reboot and attempt to get the flow of the show back up again.   Thus loosing the error report.
I NEED a solution, and I cant understand what the error report is even saying.
SPENDING $4200 on a new laptop, and if i had hair, I'd be pulliing it out.SHOULD I HAVE GONE HARDWARE INSTEAD? I know MS now, SO used to it, and i love MS far too much if only it worked for more than 5 seconds.
PLEASE APPLE HELPPPPPPPP!
or any kind users out there with some kinda fault finding knowledge

InDesign server export .pdf, AND save .indd

Hey all,
Just a quick question. Is it possible to script InDesign server to export a .pdf to a certain folder location AND save the original .indd file to another folder location all automatically?
Cheers,
Steve.

Sure. I suppose the typical way to tell it where to put the files would be to pass the paths as parameters to the script and retrieve them with app.scriptArgs.get(). See the SDK for more info.
Jeff

InDesign Server CS 6 and Mac OSX 10.9.1.

Similar Messages

Maybe you are looking for