InDesign Unable to See Image in Preview

I'm very new to InDesign (day 1) and am working on a template for a flyer.  I am unable to see one image when I do a preview.  It does not appear when I export the file.  The forum is not allowing me to attach the file.  I have checked the attributes and the Nonprinting is NOT checked.  I have the file uploaded to my Dropbox and will need an e-mail address if you would like me to share it to you.  I don't know why it's not letting me attach on these forums . . .

Petteri_Paananen wrote:
Scott Falkner wrote:
Try re-saving the EPS as an Illustrator AI file. That’s the better format. If you’re saving EPS files for use in InDesign you’re doing something wrong.
That´s true if it´s vector graphics. I assumed (may be too fast) that original problem file is photoshop-eps, because I myself have had so little troubles with vector based eps-files in indesign.
It’s also true for mixed raster and vector and for raster only. TIF, PSD, or PDP are all superior to EPS when saving from Photoshop.

Similar Messages

  • Cant see images in Preview only as thumbnails

    I recently had my PBG4 17" in for apple care service. A new(I think) HD was installed with an upgrade to OSX3.9 from previous 2.8, everything seems to be working fine except for Preview. They (Apple store) did have to re-install my backed up data and now all my images that preview usually displays come up gray screen except when I open thumbnails then I see them. Can anyone help or should I take my PB back to Apple? Oh yeah and can you help me change the language when I open "About this Mac" under more info the specs are in German.(Deustch)

    Hey, i checked the box "Open in 32-bit mode", and it totally solved the prob!
    Thank you SO much, this has been driving ,me NUTS!!!!!
    Can i ask you- what "mode" was it opening images in if not 32, and why would that option not work?
    thanks again! I love you!!!
    Apple's programs default to 64bit mode in Snow Leopard. Mostly, this works pretty well, but there have been a few times where problems pop up. I'm sure that as the drivers, flash, and other programs mature, 64 bit will cause fewer problems.
    I don't know why your version of Preview is having problems with 64bit because mine is not, but there may be other factors to consider that I'm not an expert on. I suppose you could experiment to see if the problem is with a preference (plist) file. They are located at ~/Library/Preferences/com.apple.Preview.plist or com.apple.Preview.LSSharedFileList.plist
    If you move those two files to the desktop, uncheck the 32bit mode and the program works, then you've found the real problem. Changing the program to run in 32bit mode won't hurt, but it may just be hiding the problem instead of fixing it.
    Eiher way, 32 bit mode should be ok for a program like Preview as 64bit mode's advantages of extra ram availability or other advantages won't be missed by today's Macs. As a rule of thumb though, many users are trying to get their systems to run just 64bit applications with the theory that all 64 will help keep the system more stable. We've still got changes coming to improve the situation, including upgrades by almost all 3rd party programs like MS Office or Adobe products. SL is very much a work in progress.
    Glad the info helped you get some work done. Thanks for the

  • When "allow pages to choose their own colors, instead of my selections above" is un-checked in the options menu, I am unable to see images on websites. How do I maintain having the box un-checked and still view images?

    I recently decided to switch the colors around in Firefox. I work in a pretty dark environment and having dark colored text on white or bright backgrounds is rather difficult on my eyes in the dark.
    I switched the background to a dark gray, the text to a light gray and both visited and unvisited links to a light blue. Along with these changes, I unchecked the "allow pages to choose their own colors, instead of my selections above" box.
    After unchecking the box, I am no longer able to view images on many websites. The images all turn gray - as if Firefox has changed their image into part of the background. When I check the box, I am able to see images fine, however, the websites usually revert back to their bright backgrounds with dark text.
    Any help and assistance with this is greatly appreciated!
    Thank you!

    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • Unable to see Images in LR

    I am only able to see any images when I am in develop mode in LR. Both in version 2.7 and 3. I have no issues on my PC running Windows 7 but on my laptop also running Windows 7 I have tried uninstalling and reinstalling an still cannot figure it out. I am not finding anything that can help me with my problem. Can anyone tell me what might be wrong?
    Thanks in advance!
    Pam

    Pam,
    There are 2 possible reasons for this behaviour:
    1) Corrupted previews
    Try renaming the [catlogname] Previews.lrdata folder right next to your catalog when LR is closed. This will have your previews re-rendered the next time you start LR and go to Grid View.
    2) Corrupted display profile
    If you have a hardware calibration device, try re-calibrating and re-profiling your display.
    Beat Gossweiler
    Switzerland

  • InDesign unable to Place images

    I tried to submit this but it can back undeliverable. Basically, one of our iMacs, when trying to Place image, will not show files from server. All other apps work, just not ID. Running 10.9.5 with ID 8.0.2 with Mac OS Server Mavericks and WiFi using Time Capsule. All other machines are fine. Apple wiped this Mac and did a clean OS install and I installed CS6 again but the issue continues. Help
    Steps to reproduce bug:
    1. InDesign CS6, new document open, new picture box, Place, server files not viewable (files viewable in all other applications except InDesign. (Server connection WiFi using Time Capsule).
    2. Mac computer taken to Apple Store, Clean install of OS then install of CS6.
    3. Exactly the same results. 5 other Macs running same OS and software with one occasionally seeing issue.

    This has been reported before by another user. I suggested you try to find the thread for a possible solution.
    Basically, your OS version is much newer than the CS you are using. Problems like this are not uncommon.

  • Fireworks slideshow: not able to see images thumbnails preview

    Dear all,
    I have successfully created 3 slides show with caption text and everything, out of the blue the slideshow in fireworks does not work the same way.  I create my new album, then select the image and there is no preview on the lower right hand corner, it tells me that the file is not found (please see attached jpg image with a dash circle around it) and I cannot write anything to describe my images because I am not able to see the thumbnail, please help, thanks in advance

    I cannot reprodue this problem in CS5.

  • XML Publisher Report - Unable to see image stored on External server

    Hi
    I need to put image on XML report that is on different instance for that i had put a dummy image on XML template and in the WEB TAB for that image i put the tag like url:{ATTRIBUTE3} and attribute3 is having correct value we are also showing it on the report , but at the run time i can only see the dummy image of the template and the URL, not the actual image , URL points to a image on different server we can see the image when we place that URL in Web browser.
    Please help me , Thx in advance.
    Ranga

    From the documentation:
    URL Reference
    1.Insert a dummy image in your template.
    2.In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
    url:{'http://image location'}
    For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
    Element Reference from XML File
    1.Insert a dummy image in your template.
    2.In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
    url:{IMAGE_LOCATION}
    where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
    You can also build a URL based on multiple elements at runtime. Just use the concat function to build the URL string. For example:
    url:{concat(SERVER,'/',IMAGE_DIR,'/',IMAGE_FILE)}
    where SERVER, IMAGE_DIR, and IMAGE_FILE are element names from your XML file that hold the values to construct the URL.
    This method can also be used with the OA_MEDIA reference as follows:
    url:{concat('${OA_MEDIA}','/',IMAGE_FILE)}
    Edited by: stevencallan on Feb 13, 2009 3:50 PM

  • Bridge - unable to view image in preview box

    When I open bridge and got to Filstrip or Essential workspace I can not get the image to appear in the preview box.

    Most of the problems with filmstrip mode relate to the vido card.  Make sure you have latest
    dirvers.  If card marginal one can go to advanced preferences and click
    on software rendering.

  • Unable to edit images in Preview

    I think this has been an ongoing issue based on forums, but still cannot find an answer.  I am trying to resize an image and I get: The document “_____” could not be saved.  I have tried save as, duplicate, etc... no luck.  Anyone have any success in getting this done?

    Hmmm, I wonder if that window is hidden or off screen? Have you moved the pic window around to look under it?
    Might try this...
    Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions.
    Then move these files to the Desktop for now...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    /Users/YourUserName/Library/Preferences/com.apple.Preview.plist
    /Users/YourUserName/Library/Preferences/com.apple.Preview.bookmarks.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • Unable to see images in iTunes Store

    Everything seems to be working fine except for the images. The only thing I see are grey boxes.
    I have no idea what caused this problem and I don't know how to fix it. Any ideas?
    SAMSUNG R540

    Hi, aasia_. 
    Thank you for visiting Apple Support Communities.
    Here are some troubleshooting steps that I would recommend going through for this issue.  
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    Cheers,
    Jason H.

  • Unable to see images in MAX

    I have a SenTech USB camera and recently purchased the NI Vision software.   Failing to sufficiently program in LabView to get an image using the SDK from SenTech I thought I might try to use the built in frame grabbers with Vision.  Seeing as I needed a configuration name from MAX, I thought I'd try MAX to run the camera first. 
    So I open MAX and go into the Devices and find my camera properly identified.  "cam0 : StUSBcam".  But when I hit snapshot or play I get the following unknown error:
    0x80040217
    The message is "Unknown error" which is not terribly helpful.  I would like to get back to the point where I am programming in LabView using the new IMAQ Image.ctl that I just bought but I wouldn't mind getting the camera to acknowledge me first.  
    If anyone has any experience with the SenTech SDK I'd love to pick your brain.
    -Ken

    Hello EverSong,
    I decided to prod my camera again in MAX and discovered a setting which read "1360 x 1024 UNKNOWN 15fps".  When I changed this setting to "1360 x 1024 32RGB 15fps" or 16RGB or 8Mono(?) the camera no longer threw an unknown error and was able to display an image of varying quality. 
    Initially I had tried to create a LabView program using SenTech / NI .vi's and the IMAQ vision .vi's.  I set my image to be RGB (U32) and once I sized it properly, got not one image, but 16!  I attach a picture of the alternating purple and green images from that attempt.
    Having learned about Bayer filters from SenTech I tried applying a Bayer decoder to a Greyscale (U8) image and just got garbage.  That image and program I have also attached.  The program initializes the camera, sets the trigger to free run, sets the scan mode to full scan, and starts the transfer.  The program that created the 16 pictures is the same except the source image was RBG (U32) and the output of "SNAP" fed directly into Image 2.
    Attachments:
    LabView_Image1.JPG ‏233 KB
    Img_Bayer.JPG ‏247 KB
    Prgm_Bayer.JPG ‏129 KB

  • Unable to see image in Yahoo mail from iphone, show images is turned on. IE8 works.

    I am able to see the image when I reply to the email, but not in the original email. When I look at the original email in IE8 I am able to see the image. I am using Yahoo Email Beta in both browsers.
    Thank you.
    Tom

    You can use these steps to check if images are blocked:
    * Open the web page that has the images missing in a browser tab.
    * Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    * Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    * Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    * Select the first image link and scroll down through the list with the Down arrow key.
    * If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

  • Can Not See Images On 1 Site

    HELLO,
    Can someone please help me, I am still trying to learn my MAC.....
    I go to a website, which I noticed it only does it with the one website, but I am unable to see images. It does not give a error message or anything, but once on the site, try to click on the tabs to see different categories, it does not show any pictures, which it is suppose to.I tried from my Windows computer and it shows. I think I am missing something , on how to get images to show, but its only on that site- Essence Website ? Can someone help please.
    THANK YOU VERY MUCH !

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.

  • When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

    When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

    Hi Jdentremont,
    Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
    the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
    deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
    To troubleshoot your problem, please follow the steps below:
    1.  Navigate to
     “X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
    You should see some photo files in this folder as the following screenshot.
    2. Delete all the files in this folder.
    3. On test PC, delete local cache files.
    %userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
    4. Sign-in Lync with the test account.
    5. Go back to the ABS file share, check if there is any Photo file in the folder.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Unable to create image buffer after RAM preview

    Running into an odd and frustrating error. Built a comp using the new Ray-traced 3D renderer and now I'm regretting being an early adopter big time with all the problems I've been encountering with it. The latest comes whenever I do a longer RAM preview in an attempt to watch the whole duration of my comp. It will get to about 170 frames or so, at which point I've interrupted by pressing spacebar because I don't need to see all the way to the end of my work area (around 220 frames). It'll play the RAM preview back fine, and even loop it, but as soon as I stop playback, I get this error message: "After Effects warning: Unable to create image buffer." There's only one button: "okay" and as soon as I click it the same error pops up again and it will never go away, forcing me to close AE from the task manager. I've taken to saving before every RAM preview like I used to do with Flash before previewing my buggy swfs for fear I'll lose all my work after previewing. Any ideas about what might be causing this?
    Some more details about my comp:
    1920x1080 @ 29.97
    Ray-traced 3D
    About 70 3D layers (I'm guessing this is my downfall - new renderer not designed for this many layers?)
    Running Windows 7 Professional
    i7 2600K
    32GB RAM
    2x GTX 570 video cards running latest driver (301.42, CUDA 4.2.1)
    508GB free on my 2TB internal drive where the project and cache lives
    From my GPU info window in case it's useful:
    Fast Draft:
    Available
    Texture Memory:
    600.00 MB
    Ray-tracing:
    GPU
    OpenGL
    Vendor:
    NVIDIA Corporation
    Device:
    GeForce GTX 570/PCIe/SSE2
    Version:
    3.0.0
    Total Memory:
    1.20 GB
    Shader Model:
    4.0 or later
    CUDA
    Driver Version:
    4.2
    Devices:
    2 (GeForce GTX 570, GeForce GTX 570)
    Current Usable Memory:
    1.04 GB (at application launch)
    Maximum Usable Memory:
    1.25 GB

    Yeah, some buffer is very likely not flushing when you interrupt the preview and then there is no more memory on the graphics hardware. Consider setting the work area and your preview options to use only the work area. if it finishes the preview "correctly", it may not suffer the issue. Beyond that - raytracing doesn't/ shouldn't care about the number of items. The math is such, that it makes no difference whether you render a million polygons or just one. Of course there are still limitations due to the GPU dependency, but I doubt you ever truly exhaust the cards' geometry buffers. Compared to pixel data that is a small amount...
    Mylenium

Maybe you are looking for