InDesignCC now can't save work to InDesignCS6

Hi. I downloaded InDesignCC trial to look at the programme did heaps of work on it and then purchased InDesignCS6 for our Charity (another member uses CS6) and didn't know that you can not transfer files from CC to CS6 - newer to older versions or so the Adobe help desk told me. Has anyone been able to overcome this, it would sure save me heaps of time not having to repeat all my work (otherwise it will be a lesson learnt.)

Hi. Yae I saved it and it opened abeit with some pics missing but they are easy to replace compared to the hours it would have taken to do the lot.   thanks so much

Similar Messages

  • Installed Yosemite: now can't save any files / ID, Ai, PS. Is this an Adobe issue or Apple issue?

    Installed Yosemite: now can't save any files / ID, Ai, PS. Is this an Adobe issue or Apple issue?

    I am still on Mavericks and was going to update to Yosemite, but am scared that if I do that I will lose my programs. I am following your question and I really hope that this works out for the both of us. Good Luck!!!

  • HT4753 Can auto save work with Photoshop 5.0?

    Can auto save work with Photoshop 5.0?
    [email protected]

    No. Autosave/Versions must be built into the app itself to use those OS features. It doesn't work just because it's part of the OS. None of the CS6 apps support it, either. The only Adobe apps that do are the latest versions of Photoshop Elements and Premiere Elements. And that's only because the have to in order to be allowed in the App Store. In both cases, Adobe also gives users a preference to turn it off.
    What Adobe did do in Photoshop CS6 is add an autosave feature of their own. It saves your work according to whatever time increment you choose. Then if the app crashes, it will try to reopen the saved data when you relaunch the app.

  • 'Read-Only' is applied to 44k photos while using LR5...can't save work.

    Hello,
    As noted in the title...
    Using MacPro (5 years old), OS Lion, full RAM, 4 HD's with 2 TB+ drives, plenty ofroom left over in all.
    ALL 44k images located in one LR3 catalog (recent upgrade to LR5 hoping for remedy 2 days ago) show 'read-only' notice, so after doing any kind of work on them in develop, etc. I select all (in specific folder, not 44k photos!) then save it, a notice comes up and says these are 'read-only' files. Thus not able to save any work that is apparent in LR.  BUT, when exported as JPG all changes are saved.
    I have opened various folders, NOT via LR, but via Finder (OS Lion) and opened one by one using PS 4 and they open fine in RAW converter window.  Save as PSD, all files look fine.  Same for JPG's.
    The issue is LR, or hard drive or something along the chain where the photos, when viewed in LR, say they are 'read-only'.
    Via Finder window I have opened various files (denoting read-only notice) and right-clicked to 'get info' on that specific photo. ALL files are 'read and write', there are NO files that are denoted read-only when getting the info.  I checked 50+ photos in 25 different folder locations.
    Laptop test:
    I started a new LR catalog in LR5, with ZERO photos and imported a few folders, with images that had 'read-only' notice to make sure I tested the same photos that had given me the read-only notice.
    Did a test on photos with 'read-only' files on a laptop (OS Mountain Lion), pulled files from HD where ALL 44k photos are located.  Copied to thumb drive, imported with LR5, copied to desktop in test folder, all photos came in fine, slected all, did global edit to all images, saved all, all images were saved with NO 'read-only' notice.  This is true for a series of folders.
    So my test, if it proves anything, is that either LR is messed-up or the HD is messed-up on MacPro tower or something is telling LR to show the 'read-only' notice to pop up.
    Back-ups:
    Back-ups were done from HD where all 44K photos reside, to 2 (two) other drives, within MacPro tower.  So ALL 44k photos are essentially the same.  This was a drag-n-drop not using Super Duper or similar byte-verification software.
    Any ideas on why ALL 44k images say 'read-only', when viewed in LR5 in MacPro tower but NOT in laptop?  HD is 5 years old...could this be the weak link?
    Also, considering to wipe the complete system drive (not HD where photos reside) and re-load everything from scratch to begin anew.  My concern is will this help and then, will wiping all drives and re-loading all images, then re-loading LR5 catalog will solve this.  I am resigned to a week of doing this if it works as right now, I am at a stand still and cannot go forward or backward.
    Thanks
    Sergio

    Ok, before we square off on the definition of metadata.  I was saving work done in the develop module, as in developing the photo to my taste.  Once I am done with the work, I either select the one image or all images in a folder and save the work.  If the saving action is indeed called metadata (that is written to the xmp sidecar file) so be it.  All I care about is that the sidecar file hangs onto the work I just did.  Thus if a catalog is corrupted, I can re-load a recent back-up (done every time LR exits) and not have to do the work again.  I also want to make sure my photos can be used even if LR dies, fades away into obscurity or no longer works.  I do not want my photos to be 'prisoners' of Adobe LR or any other software.  That is why I tested the photos outside of LR, by opening them in PS and see if my settings stayed as I had them before.  If LR automatically saves the work to the catalog, great, no worries.
    Now, onto the issue at hand.
    Why do I get 'read-only' when I try to save work to a photo or a bunch of photos within a folder?
    Where do I go to get "permission to write to a folder', whether using LR or any other software?
    thanks

  • Having purchased and installed pages after finishing my 30 day trial I now can't save changes to documents, it keeps saying that my trial is over and I need a serial number?  Never got a serial number, any ideas how to rectify this?

    Hi, having purchased and installed pages after my 30 day trial had finished I am now unable to save any changes to documents I had created in the trial version.  It says I need a serial number, which I never got when I purchased the pages app.  Does anyone kno how to rectify this, I would be very grateful for any help as I'm currently writing up my thesis and am now unable

    Hi, I had the same problem and I found that you don't need a serial number anymore. Here is what I did:
    (1)I went to Applications fodder on my Mac. (You can navigate to the Application folder from 'New Finder Window.')
    (2) Deleted Pages (installed as part of the free  free trial version) from the Applications Folder. Also deleted 'IWorks' from the Applications folder.
    (3) Started AppStore.
    (4) Clicked on  Purchases.
    (5) Clicked on Pages.
    (6) Clicked Install.
    (4) repeated (5) and (6) for Numbers and Keynote

  • I lost most of my bookmarks and now can only save a few

    Yesterday, most of my bookmarks went away with only about 12 remaining. In addition to this, now I can only save 12 bookmarks.

    This can be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Visio Professional 2013 trial - can't save work

    I can't save the work I do when using the trial version of Visio Professional 2013 - is it because it is a trial version?

    Hi,
    Have you tried to repair Visio 2013 from Control Panel > Programs and Features
    Does it happen in recent or it began from the day of Visio 2013 installation?
    It the former, please think about what's the application/update installed in the recent past days, and try to remove the suspecious one to check if the save function would be recovery.
    We may also create a new local user account with Administrator permission and test the behavior in that user profile.
    Regards,
    George Zhao
    TechNet Community Support

  • Installed DW CS4 now can't save or open in illustrator 10 ?

    I installed Dreamweaver CS4 over the weekend and today I need to do some illustrator (10) work and the program crashes on file>open and on file>save. I can load a file into dreamweaver by clicking the file name in explorer and I can do a 'save as', but I cannot directly open or save.
    I am pretty sure this is a dll problem, something got overwritten when I installed Dreamweaver. Can anyone shed some light on this ?

    The only thing I could find that closely resembled your issue was the following: http://forums.adobe.com/thread/321431 but it is the reverse of your situation, it has the CS4 version crashing in SP2.  Technically speaking Adobe "recommends" SP3 of Windows XP even though SP2 is listed.  I do not know if updating would possibly cause Illustrator to stop working though.
    What I would recommend at this point is to contact Adobe technical support and raise this as an installation issue that the installation is not working properly and see how they handle it.  They will need access to your installation log ( KB Article explaining how to get it: http://kb2.adobe.com/cps/404/kb404083.html ).  Then with a trouble ticket online you can upload the log via FTP (instructions given to you during process) and then Adobe can help you out.

  • Moved location of Pages in "Applications", now can't save "Permission Denied"

    To make things easier to me I moved my iWork applications out of the iWork '09 folder and into just applications.  That way I didn't have to click on applications, then the iwork folder, then the program I wanted, they are now in order with my other applications.
    I now am unable to save any new documents or changes to others.  I have tried this in Pages and Numbers and keep getting the "Permission Denied" error message.
    I have restarted my computer several times to no avail.
    Any ideas?

    cd,
    You didn't need to move anything. This is what shortcuts are for. There once was a Pages shortcut on your Dock, a one-click action to start the app. You could restore that. You could place a shortcut on your Desktop. Or, you could use Spotlight to start the app.
    Spotlight is my favorite because I don't have to touch the mouse. Type Command-Spacebar and then type p   a   g   e... etc. until "Pages" shows up in Top Hit in the Spotlight list, then hit Return to start the app.
    Jerry

  • Can't save work

    Never mind, figured it out...

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Why I can't save pictures from google images?

    After updating the latest iOS 6, I now can't save images on my iPhone from Internet. What should I do?

    It's probably your google settings because I had this problem too! Go to "Settings" > "Privacy" > "Photos" > Make sure that next to Google it is "On". Hope this helps!

  • I have Nortons security suite under the old version the Idenity protection worked I kept all my passwords under this which used a master pasword I did not save passwords any were else and now can not get it to work supplying passwords for my l0gon site.

    I have Norton's security suite under the old version the Idenity protection worked. I kept all my passwords under this which used a master pasword I did not save my passwords any were else and now can not get it to work supplying passwords for my logon site.

    Symantec need to correct a mistake they made with their add-ons. They originally updated their add-ons after quite a delay to work with Firefox 4.0 as shown here - http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894
    They made an error with the update in only listing it as compatible with Firefox 4.0, so they will not install on Firefox 4.0.1 and subsequent Firefox security updates. Symantec have indicated they will be releasing an update to correct their error soon, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788/page/12

  • I bought and downloaded iWork when i bought my macbook pro and i used to save my documents on words. then a few weeks ago, i downloaded a free trial of microsoft office but unregistered and deleted it a week after. now i can't save my documents on word.

    i bought and downloaded iWork when i bought my macbook pro and i used to save my documents on words. then a few weeks ago, i downloaded a free trial of microsoft office but unregistered and deleted it a week after. now i can't save my documents on word. It used to ask me if I want to save my documents on word, now it doesn't. And the W icon keeps on appearing on my dock. Can I return my computer to an earlier date? Please help me. Thanks

    No, I don't have a back-up of TIme Machine... to tell you the truth, I have this computer for a few years now and I still don't know how to work all of the apps that are here. Anything else I can do?

  • A year ago I paid to update my Pages.  If I click on the doc on the desktop the old Pages opens up and I can't save my work. Help!

    A year ago I paid to update Pages to 4.1.  If I click on a Pages doc on the desktop the old Pages opens up and I can't save my work and so I lose what I do.  So for a year I have been remembering to open Pages using the icon on the bottom of the desktop and all is OK.  But when my work is being reviewed and resent to me, then I have problems with opening that file and saving those changes.  So I have been coping and pasting the resent work to me and putting it into a new doc.  
    So today wanting to fix this annoying problem and reading something on this forum I went into applications and moved a Pages something that was in Applications into the iwork 09 file.  A pop up box asked if I wanted to replace the old Pages with the newer version and I clicked Yes. 
    Now I can't open up any of my Pages work on the desktop.
    I have not shut down my laptop and restarted - would this solve the problem?
    I am not going to panic - just yet ... but can anybody help!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB one and $99 for the other 4Gs. They do not fix yours. The cracked screen voids any warranty you had on the iPod.
      Apple - iPod Repair price                                             

  • How can I save a spreadsheet prepared in numbers to excel so that all of my pc using work colleagues can view

    How can I save a spreadsheet prepared in numbers to excel so that all of my pc using work colleagues can view.  I have recently upgraded to Lion and am wondering whether I have made a big mistake. I am the only Mac user within the company i work for and up to now this has not been a problem

    File menu, Export. Select Excel as the format.

Maybe you are looking for