INDESING - IMÁGENES VINCULADAS NO APARECEN (MAC)

Hola,
Estoy trabajando un catálogo con InDesing. Todas las imágenes vinculadas están en la misma carpeta, las rutas son correctas y en cambio algunas se muestran y otras no. En la comprobación preliminar me indica que todas los vínculos están encontrados. He vuelto a vincular las imágenes una a una varias veces y el problema persiste. Las imágenes que no aparecen tienen el mismo formato que las que aparecen (tiff,jpeg,eps...etc) No entiendo nada. ¿Alguien me puede ayudar?
Gracias.

¿Cómo estás colocando las imágenes? Usar Copiar y Pegar suele producir efectos desastrosos; usa siempre Colocar.
A la mayoría de los programas de diseño no les gustan los JPGs. Trata de usar TIFF para fotos etc y EPS para dibujos de línea.
¿Te ocurre sólo con ese archivo, o también con otros? He leído que en versiones recientes de InDesign (que yo no tengo; aún estoy en la 2) hay una manera de guardar un archivo que ayuda a eliminar problemas, pero no recuerdo los detalles. Si no recibies otra respuesta pronto, podría intentar conseguirte los detalles en los foros en inglés, salvo que lo puedas hacer tú mismo.

Similar Messages

  • Ipod touch 5th gen not detected in mac os 10.8.2

    Hi
    My ipod touch 5 gen with ios 6.0.2 is not detected in mac mini with 10.8.2. It is working with all other PCs and mac except my mac. I tried all the posible trobleshootings found in the internet, still it is not working.

    Hi Bruce, and a warm welcome to the forums!
    I can't find the PCI card, just the PCIe card...
    http://www.sonnettech.com/support/kb/kb.php?cat=164&expand=a3_a2b405&action=b490#b490
    http://www.amazon.com/Presto-Gigabit-Ethernet-PCIe-Card/dp/B0017K6BR8
    But on a hunch, System Preferences>Network, unlock the Lock if need be, see if you get New Port Detected, or click the little + icon and see if you can add Ethernet.
    If it works & that is the Interface used for Internet, click on the little Gear icon>Set Service Order, drag Ethernet to the top.

  • Nano 2nd. Gen. on PC AND MAC

    I have the Mac at home and have to work on a PC for work, can the 2nd gen nano run on both at the same time? I know I can format the nano to work for a PC, but will I have to format it again to work at home on the mac and reload everything? And is there a way to reverse synch to place music onto the PC itunes FROM the Ipod?

    can the 2nd gen nano run on both at the same time?
    Probably the easiest way to use an iPod on both Mac and Windows computers is to format the iPod (using iPod Updater) using the PC. This will force your iPod to use the Windows file system (FAT32) which both the Mac and PC can read from and write to without the help of additional software.
    Of course then all your software updates for the iPod will have to be done on Windows.


    If you need to use a Mac (HFS+) formatted iPod on a Windows PC, you'll need to install some 3rd party software such as XPlay 2.0 or MacDrive (which you can get from MediaFour Software). This will enable your Windows PC to read a Mac-formatted iPod.
    is there a way to reverse synch to place music onto the PC itunes FROM the Ipod?
    Not if your iPod is Mac formatted, unless you use the software previously mentioned. Windows cannot read a Mac iPod without such software.
    If your iPod is Windows formatted it would be easy enough to use something such as Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Other free programs are Pod Player, SharePod and Floola.

  • How do I re-format windows iPod Shuffle 3rd gen to work on Mac?

    I Have an iPod shuffle 3rd gen that works perfectly well on a windows laptop, however I want to link it to my MacBook.
    When I plug the iPod into my Mac it charges but doesn't appear in iTunes.
    I have restored it to factory settings using iTunes on Windows but it still doesn't appear on my MacBook.
    Anyone know how to solve this issue?
    Thanks!

    This link applies to your iPod not being recognized by iTunes, http://support.apple.com/kb/TS1410

  • First Gen iPod reformat from MAC to PC?

    Is it possible to reformat a first gen MAC formatted iPod so that it will work on PC? Also, is there a way to save the songs that are currently on it before the reformat so that I may upload them again on to it once it is PC ready? thanks

    I highly doubt it because windows uses the FAT32 format while the Mac uses HFS Plus which is why windows needs a program like itunes to transfer files. So no i doubt you could do it.

  • Can I use a shuffle and a 1st gen on the same mac

    I use my 1st gen ipod for pod cast in the car. I want to get a shuffle to take just a few podcast with me when walking. Is it possible to use a shuffle and another i-pod on the same mac. can I manually transfer a couple of pod cast to a shuffle?
    Thanks
    Joe

    Itunes 4.9 is fine but I really would recommend getting the latest Ipod updater they just made another bug fix for the shuffle in the latest Ipod updater. http://www.apple.com/ipod/download/

  • Cant find ipod shuffle 4th gen in itunes on mac

    Please help!!
    I cant seem to connect my ipod shuffle 4th generation with my itunes account..
    -I have the latest itunes
    -I have the latest macbook software
    -I tried to turn off the shuffle and turn it on again - no difference!
    -I tried to restart my macbook - no change!
    -I tried to change USB - no change!
    I tried to follow apple's walk through - but it didnt help..
    Earlier when I bought the ipod shuffle from apple I connected it to a regular computer with windows 7..
    -Theres currently music on the ipod, but Id like to change it..
    Any idea to how I can solve this?

    Hi JeanLarsen,
    Thank you for visiting Apple Support Communities.
    It appears that you don't see your iPod shuffle in iTunes when you connect it to your Mac.
    You have tried several good troubleshooting steps, and there are a few more that I'd recommend from the support article If you don't see your connected device in iTunes for Mac.
    You mentioned trying to change USB, and I want to make sure that includes all three of these steps:
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable.
    Also, be sure to use the steps in this article when you reset your iPod:
    Reset your iPod - Apple Support
    If you have installed security or antivirus software, this tip may help:
    If you have security software installed, learn how to resolve issues between iTunes and your security software.
    If the icon for your iPod shuffle still does not appear in the upper-left corner of the iTunes Window, the article I mentioned suggests contacting Apple Support for more help:
    If you still don't see your device in iTunes, contact Apple Support.
    Sincerely,
    Jeremy

  • IPod shuffle 2nd gen not recognized in Mac either Finder or iTunes (but is detected and works perfectly fine on Windows)... i tried using iPod Reset Utility, but no luck...

    i've been working on this for the past few days, and still no luck... iPod Shuffle 2nd generation (i know it's old).... not detected in my home MacBook... but works perfectly fine on Windows....
    i tried using iPod Reset Utility, soooo many times... and i only had twice the luck of having it formatted... but even though it is formatted, it still isn't recognized in iTunes or even in Finder.... other than the 2 times of having it formatted using iPod Reset Utility, i had seen all the reuslts, like: Error ressetting the ipod blah blah: iPod has been reset, keep plugged in, until reset is completed blah blah: iPod has been reset, unplug and replug your iPod blah blah... etc, i have seen all the possible effects of iPod Reset Utility, but still no luck getting it recognized in iTunes or Finder....
    and then , i tried connecting it to a windows computer (but i didn't restore it from there, and just ejected it from windows iTunes), after ejecting it from windows, and then connecting it to Mac, it worked miraculuosly.... perfectly synced and able to put music and listen to them... ejected iPod... after a few minutes, i wanted to add some other music, but when i connected it again, Bam!!!! not working again... even after connecting to windows, it didn't work anymore... guess the magic trick has been doomed...
    i badly need help... puhlease...  (^_^)

    Hey, I hear ya and can sympathize. I have the same
    issue. The difference is that my computer can "see"
    my ipod but it refuses to show up in itunes itself;
    therefore, I can't put anything on the ipod (from the
    computer) and vice-versa. Apple support is clueless.
    This is very frustrating to say the least. Itunes
    keeps telling me that my ipod is synced to a
    "different" computer, which isn't true. It's the
    same computer. The difference is that when I first
    got the 'pod and used it with this computer (and
    everything worked fine), I was running XP. I
    installed Vista and after that, all the problems
    started. If I ever get this resolved, believe me,
    I'll post something here.
    I'm guessing that somehow, itunes "sees" what
    computer it's hooked to by "looking" at something in
    the OS. Change the OS and it "thinks" it's seeing a
    "different" computer.
    Try reformatting it.

  • Weird Shuffle (2nd Gen) connection behavior on Mac

    Hey all,
    My shuffle is behaving a bit strangely when I connect it to my Mac. The same thing happens with both my PowerBook and my G5. Basically, if it is plugged in while the computer is off, it is not recognized when the computer boots.. I just get the blinking amber light.
    Similarly, if I put it in its dock while the computer is on, iTunes tries to start (ie, there is an arrow under it in the dock) but it never comes up - it locks up. I get the same blinking amber light. The only way to make iTunes open is to disconnect the iPod.
    The only way it seems to work properly is if I boot the computer, start iTunes, THEN connect the iPod. This is not a big deal, but it is an annoyance, so I thought I'd post to see what's going on.
    Both my PB and G5 have all the latest software/updates. On the PB I plugged it in directly - no other USB devices. On the G5, its plugged into the powered hub in my monitor. Same result with both computers.
    Any thoughts?
    Power Mac G5 Single 1.8   Mac OS X (10.4.8)   2Gig RAM

    I have this same behavior. The iPod works fine if I unplug it before I startup my iMac and plug it in after startup is complete. But if I start up with it plugged in it does not show up on the desktop or in iTunes (it does show up in the system profiler).
    In the console it is full of this: "Found a transaction past the completion deadline on bus 75, timing out!"
    Also if I startup with the iPod connected it effects my use of Toast Titanium. Toast will not open and it will not force quit either. Even going into terminal and using the kill command does not work. When that happens the only way to shut down or restart the computer is to do a hard restart.
    The strange thing is that all works fine if I unplug the iPod before startup (both Toast and the iPod).
    Is there any solution to this problem? Is there anything I can do?

  • Using new 6th gen non with older mac

    I have a powerpc g5 mac with 10.4.11 OS 1G ram. I got the new nano for christmas but I need itunes 10 to use it, I need 10.5 or greater OS to run itunes 10. Can I run 10.5 OS on my mac since it doesnt have the intel processor?
    I have a friend who has a mac support service tell me that I couldn't but I think he is giving me BS since he doesn't want to give me the OS system I need (he has the new software for the the newer OS systems which allows him to distribute multiple copies of it)

    You will probably be able to find retail copies of it via eBay or Amazon. Supposedly, Apple still has copies of it on hand as well, so it might not hurt to give them a call either if you are willing to go that route.
    http://www.amazon.com/Mac-OS-Version-10-5-6-Leopard/dp/B000FK88JK
    B-rock

  • 2nd Gen Mac Mini, iTunes Streaming issues

    Feeling flushed I've replaced my ATV1, 1st gen Time Capsule and Mac Mini and moved them down to the retirement home we're working on.
    One of the reasons I replaced the Mac Mini was everytime I booted up I had to run diagnostics to get the airport running effeiciently . However, in the other place still using the TC as the wireless router it appeared to working much better. Then I added the old ATV1. Again for a week things were great.
    Then...... while streaming music to the ATV1 and an Airport Express upstairs I noticed it started coughing and cutting out. I'd have to reconnect the speakers (ATV1 in the same room & AE upstairs) and restart the track. After experimenting what seems to be happening is:
    When playing iTunes to the ATV1 and AE Speakers if I trying and download something large it cuts out, and if open Airport Utility or iStumbler (checking the power on each device for wireless power) it coughs badly recovering intermitantly. I can internet to my hearts content without any problems and up load massive documents to iDisk without interupting the music????
    Apart from the AE ('n') they are all 'g' devices. iStumbler is showing relatively low signal strength for TC (41% ish about 20 feet away) and the AE (19% immediately upstairs above the Mini). As we're on the beach the only two other neighbours signals are showing and are really weak.... so the 'noise' is almost nothing.
    In a wireless network siutation does the Mini talk directly to the speakers or does it have to go through the TC?? Is the Mini card dying or is it the TC? Caould I use another AE ('n') plugged into the Mini as the wirelss card?
    Or is it the ATV1 dragging the signal down?
    sigh... it was all going so well......

    Thanks that's really helpful.
    Sorry; aren't the old Mini, TC and ATV1 all g and the new AX n? Same principle though. I thought the AX was allegedly b/g/n compatible?
    Should have know the AX might be the prob. I had an issue with one here. It was too near the ATV1 and was interfering with its visibility. When I seperated them further (distance) the both became visible and signals improved. The trouble is because of the house construction I need a boost upstairs. The AX works great for internet extension.
    Did I read somewhere someone reset an AX for g only?
    Cheers.

  • How do i copy my cd's from my iPod nano 5th gen to my mac book pro?

    how do I copy my recorded cd's from my Ipod nano gen 5 to my mac book pro?

    Quit iPhoto if open.
    Open your Pictures folder and select the iPhoto Library.
    Copy the iPhoto Library folder or package to your new computer.

  • Airport Extreme card for 1st Gen. Mac Pro

    Hey guys. I have a 1st gen. (purchased Sept 2006) Mac Pro that doesn't have the Airport card installed. Which card do I need to buy and where I can find it? What is the model/service part number I need? I called two Apple stores in OK and they said they could install the part but they couldn't order it for me.
    My serial number is G86**UPZ if that helps any.
    Thanks!

    http://www.macwireless.com/ may sell a PCI card you can use.
    There are also ethernet to WiFi bridges you can use too.
    If you are adventurous, Google revealed this result which was referred to by a Macnn thread:
    http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

  • IPod Gen 5 (late 2006), 30GB, Black, will not sync with prior iTunes or current

         I have an iPod, Gen 5 (late 2006), 30GB, Black, I had kept unopened for a while (purchased in 2007 and opened it in 2008-09). I retrieved the iPod Gen 5, opened, and did sync it with my PC-Windows 7, one (1) time. I uploaded my music and it worked fine.
         I obtained new music and after uploading the added music, I attached my iPod Gen 5 to the PC-Win 7, at which time a window popped open stating there was something wrong with the "data storage," requesting Win 7 to perform a system check on the "data system" or "continue without checking." I chose the latter. This caused the iTunes & PC to freeze. Nothing worked, even the Task Manager would not shut it down. The only way to unfreeze everything was to restart the computer. After searching iTunes Support, doing everything suggested, including totally uninstalling iTunes (no trace to be found) and then re-installed iTunes. Re-synced the music library and then attempted to re-sync my iPod Gen 5. Everything started all over again.
        I took my iPod Gen 5 to the Apple Store - Genius Bar where an employee was able to sync the iPod Gen 5 with the Mac computer at the store. The iPod Gen 5 worked perfectly. I respectfully requested the employee to reformat/restore the iPod Gen 5 with their Mac computer, again, my iPod Gen 5 still worked.
         I went home in attempt to sync my iPod Gen 5 with my Windows PC (Win 7), and again, everything froze--iTunes and the PC. I waited several weeks and searched further on Apple.com/support to seek any other answers. However, none were found. Uninstalled and re-installed iTunes 2-3 times and still kept freezing iTunes and my PC. Went back to Apple Store-Genius Bar and my iPod synced just fine with the Mac computer. Reqested to restore on site and took it home, just to have all the problems to start all over again with the PC and iTunes problems.
         About two weeks ago (11/12/2011), I totally wiped clean and reformatted my full PC, re-installing Windows 7 and only my major programs. After updating my iPhone 3GS and iPod Touch Gen 4, I took a chance to re-sync my iPod Gen 5, AND IT STARTS ALL OVER AGAIN!!!
        Is there anyone who can inform me as to why this is happening, when I was able to sync the iPod Gen 5 the very FIRST time, but after that the problems started? I know if I take the iPod back to the Apple Store, it will work for them.
        It should be noted I did attempt the same procedures with my laptop computer with Window XP Home Edition, SP3. Still did the same thing.
         Any help please? Thank you in advance. Other than the age of the iPod, it is "practically brand new" or has been used for about 2-3 weeks.

    Everything was downloaded directly from Apple's website. I found some possible answers through "Mitch751" but cannot print out yet until I restart my computer. iPod is still attached and wanted to search while it was charging. As I mentioned, I have done everything searched and researched and even stumped the Apple Genius bar employee.
    Thank you Desmond

  • Whats the best way to connect multiple iphones, ipads, ipods with multiple accounts to one mac

    I have iPhone 5s, ipad 4th gen ipod classic and mac mini on one itunes account with iphone 4s with ipad 1st gen on another account (wife's account) and also want to be able to add to this in the future. I want to connect through the mac mini and be able to use music movies calanders reminders etc through all our i's, whats the simplest and best way to go about this, before i start down the wrong road.

    Ok, here is the link to the original thread.  The key, for him, was that all of the pads used the same apple id, and needed to be set up identically.
    https://discussions.apple.com/message/15456170#15456170
    The other trick they use for distributing materials for whatever class was using the pads, was to create an e mail account that they all had acees to.  The documents, pdf, or whatever, would be e mailed to the account.  Each kid accesses and downloads the email.  Does whatever they are supposed to do, and e mails the done result back to the mailbox.     Easy for the teacher and the kids.

Maybe you are looking for