Index Content server on ECC by TREX

HI,
I have TREX versuion 7.00.33.
When I run the job "RSTIRIDX" it index my Content Server,
the CS go down in the middel of the indexing,
my question is what trex doing when his CS go down?
it skip that document?
when I run again these job RSTIRIDX again it will insex these document, or not?
thanks
Royi

Pros - You'll have a Content Server...
Cons - Whatever is not listed above...
Regards
Juan
PS: by the way... what is your actual question?

Similar Messages

Using MS-Sharepoint as a content server from ECC 6.0

Hi, gurus.
From the
[SAP Content Server Installation Guide|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/cfa73246-0a01-0010-71b4-bc21ccb45c99&overridelayout=true]
...you will find this information:
You can find a description of the SAP Content Server Interface in the SAP Library (on the documentation CD or under www.//help.sap.com) under SAP Web Application Server u2192 Basis Services u2192 Knowledge Provider u2192 Content Management Service u2192 SAP Content Server HTTP Interface. If you want to integrate another content server into your network, the new content server must fulfil the requirements of the interface.
My simple question is:
Is it possible to use MS Sharepoint as a content server from ECC 6.0 ?
Please advice.

Hi Athol,
Thanks very much, your answers are very helpful.
To use SharePoint as SAP DMS for document management. We have depend on the 3rd party products like iNet.DM from ERP.Link or Duet Enterprise and separate licenses required for products?
Without this 3rd party products, it is not possible to use SharePoint as SAP DMS?
What is best and cost effective way of achieving this requirement?
Thanks and Regards,
Venky.

DMS and Content Server in ECC 6

Dear colleagues.
IN ECC 6 there is a internal BSP based content server, that allows store the document in the main SAP Database.
In case of great number of documnets. managed in DMS, can in impact performance of all ECC 6 applications.
Does it make sence to install separate 640 Content server, or maybe install pure NW 2004S server, which wil run inly content sever BSP on separate database?
Regards
Vladimir

I would always recommend the use of the SAP HTTP Content Server (640 content server). The database on the SAP server itself is impractical for anything other than a dev or qa environment.

SAP HTTP Content Server and ECC 6 to be installed on same Windows system?

Hi Gurus:
I have ECC 6 (IDES) running on a Windows 2003 server already. I plan to install the SAP HTTP Content server on the same machine/same operating system.   I will be the only user, just testing it out and learning things myself.
Is this advisable?
Also does anyone know the latest set of Content Server DVDs/CDs to download ?

Deepak:
Thanks a lot.
My Content Server is running OK now.
Two repositories are created: one is DMS, one is on ArchLink (ArchiveLink).
But when I am trying to attach a PDF document to a PO, I got this:
HTTP error: 401 Unauthorized
     Message no. CMS025
Diagnosis
     Error in accessing via HTTP
     401 Unauthorized
Any clue???

TREX indexing on content server performance

Hi guys,
Our Portal is integrated with SAP CRM (using webdav) that manages documents stored in SAP content server. We use TREX to index these documents such that users in Portal can search for these documents. Currently we're evaluating the performance of indexing and searching, thus if we have a heavy load of documents to index, would it affect the SAP CRM/Content server that is the document repository? (such as memory consumption, performance, etc..)
Thanks,
ZM

Hi Chris,
do you use the ContentServer in the DMS application? If yes, you need to index documents stored in the DMS_PCD1 docu category.
Regards,
Mikhail

DB50 error on Content Server instance

Hi,
I installed Content Server 6.40 with MaxDB 7.6 on a standalone host.
Then I configured the above content server on ECC 6.0 DEV system.
The content server respositories were created on ECC 6.0 DEV system and connecting between ECC 6.0 to content server was established successfully.
Now I execute DB50 on ECC 6.0 DEV system to check the performance of MaxDB instance (which was connected to ECC 6.0 DEV system by content server repositories).
After executing DB50, I get an error "Program can only be used with MaxDB". How can I rectify this error?

Hi Diana,
you are able to see many profiles at path /usr/sap/<SID>/SYS/profile because profiles of application servers are also saved.
You are able to see profiles of Dialog Instance installed on another server as well as on same server.
To know the exact profile, understand the naming convention
PRD_DVEBMGS00_SPRODUCCION1 --> From this profile, we can say that Instance DVEBMGS is installed with Instance Number 00, SID as PRD on server SPRODUCCION1
PRD_D02_SPRODUCCION2 --> From this profile, we can say that Instance D (Dialog Instance) is installed with Instance Number 02, SID as PRD on server SPRODUCCION2
PRD_SCS01_SPRODUCCION --> From this profile, we can say that Instance SCS (Central Services Instance) is installed with Instance Number 01, SID as PRD on server SPRODUCCION
Now, to see correct profiles in Transaction RZ10, you need to Import Profiles in it.
You can do this by going to Tcode RZ10 ---> From Menu Click on Utilities --> Import Profiles --> Of Active Servers
You can select the Profile you want to edit and select the option Extended Maintenance and click on change.
To find out the Correct Profile to add New Values, you need to know where you want to do changes i.e. on Dialog Instance on Another Server, Dialog Instance on Same Server or DVEBMGS00 Instance.
After changing the profile parameters, you need to take restart of SAP System to make the changes effective.
Let us know, if this information was helpful to you.
with regards,
Parin Hariyani

DMS and Content Server configuration

After installing the Content Server and creating a Content Repository, I have to make that documents be stored in that contet repository. Please, help me with this becasue it is not clear for me how to solve it.
Thanks!
Patricia

Hello Everybody,
my team and me need your help.
We have the same problem...
- Installed Content server on Win 2003 server
- Using SAP ECC 5.0 and trying to create and configure content repository via 'OAC0'
- This is initially our test environment so here we are not using any certificates
When we try to connect the Content Server from ECC 5.0, an error popup appeared : HTTP error 401 "Error in configSet".
Is somebody has an idea ?
Latheef (or someone else), could you please forward me the Configuration document on SAP Content server ?
My mail is : <email address deleted by moderator>
Thanks in advance & Regards,
Christophe

TREX indexing from content server(maxdb)

Hello.
I've installed standalone TREX on Linux, configured the connection to R3 system and to Portal as well. On the R3 I have configured connection to the SAP Content serve(via archive link) where we save some documents(pdf, doc. files). The part which I don't understand is how can I configure the repository of the content server as a source for the Trex index?
Any hint would be useful. Thanks in advance.
Vit

Hi,
the question is what exactly do you wanna do?
Integrating a archivelink in the Portal or indexing the documents via ERP?
In the first case you must create a web repository and define an index.
In the other case it depends on the SAP Solution but mostly you have to customize the SM59, SRMO, SKPR06.
Best reagrds
Frank

Indexing documents storaged in Documentum Content Server

Hello experts,
I've a question about how i can do the next project.
My development team wants develop in our SAP ECC 6.0 system an application that allows them work with the documents storaged in our Documentum Content Server, and after they must be able to search over does document contents an retrieve them from content server.
Basically, we need indexing the documents of Content Server for use it in SAP system.
It's possibily do it only with Documentum Content Server?? or we need SAP Trex??
Thanks
Regards.

Hi Sonia,
Refer the documentum server link below for required information
http://docs.oracle.com/cd/E10502_01/doc/search.1018/e10418/cmsources.htm
Hope this is useful.
Regards,
Deepak Kori

TREX/Content Server: Full text searches not working

I've setup TREX and Content Server in a sandbox environment and have been trying to get my head around DMS. I've completed what I've believed are the required steps (outlined below) and I have submitted 12 documents of various types into the respository. I'm able to perform meta data searches but not full text searched. Any ideas what I might have missed?
Much thanks!!!!
/Greg
0. Defined connection to TREX Server: TREX_42 (SM59); Using TREXADMIN all services are green.
1. "Define Document Area" - DMS is present; assumed I would use this one.
2. "Defined Indexing Readiness" - selected "Index Release" & "Classify" for DMS; set "Search Srv" to DMS_TEST
3. "Define Content Respository" - Created Z_CR_001 and maintained it as follows:
- Documentation Area: Document Management System
- Storage Type: HTTP content server
- HTTP Server: srv-sptxd2-dal.intervoice.int (content server)
- Port: 1090
- HTTP Script: ContentServer/ContentServer.dll
- Physical Path: /usr/sap/IRD/SYS/global/
4. "Define Content Categories" - Created ZCSSTRUCT; maintained as follows:
- Document Area: DMS
- Content Rep: Z_CR_001
5. Checked CSADMIN for Z_CR_001 - All Green
6. Went into SKPR07 (monitoring tab); entered DMS_PCD1 and "Indexing possible", "Auto indexing" and "DocArea activated" is all green.
7. Went into SMRO
- created SSR: "Search Server ID" = DMS_TEST, "Search engine" = DRFUZZY
- Verified "RFC Destinations"; passed tests; all green.
8. Went into SKPR07; using DMS_PCD1 as document class.
- executed "Clean up table entries"
- deselected "Limited to selected language"
- executed reindex. "Copied successfully from search engine"
- Selected the created index category
- Set the "Document area" indicator
- execute "Trigger process"; 12 documents referenced
9. Going into TREXADMIN I can see the created index; however the document count = 0. Also there is no queue created -- should there be?
Edited by: Greg Preston on Aug 5, 2009 9:11 PM

Dear
this link will help you,
TREX Architecture
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/71/b26b2bfdc4eb47ab5432e8444290ce/content.htm
File Formats Supported by TREX
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/55/cb634114b78047e10000000a1550b0/content.htm
Detail about TREX Configuration (Basic to advance)
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/46/bab1d48b0a1514e10000000a114a6b/content.htm
Regards
Tushar Dave
Edited by: Tushar Dave on Aug 6, 2009 9:59 AM

TREX - Generic Object Services (GOS) - CV04N -Content Server

Hello,
I'v installed a content server / maxdb, and i forwarded the attached files (Gos) to this content repository.
I'v installed TREX and I can see the fields in the CV04N.
Just one question :
Can I search some documents via TREX (CV04N), or what is the best practice for storing the attachments and search it with TREX ?
Thanks
Stéphane.

Once the Content Server is installed,set the Content Server for indexing preparation:
-Start the function Monitoring for Knowledge Provider (transaction code SKPR07).
-Enter the document class DMS_PCD1.
-Select Edit > Administration.
A dialog box appears where the following data is preset(if no,then please select the same):
1.Document Area
DMS
2.Administration table
DMS1DIDSTA
3.Class can be indexed
X
-Set the indicator: Setup indexing.
-Select in Customizing of Document Management the MIME types that you want to be read for the full text search; under General Data > Settings for storage systems > Create MIME types for full text search.
-Schedule the full text search for cyclical background preparation.
Execute transaction Start job (transaction code SM36).
Schedule the job for the following ABAP program: RSTIRIDX (Report for indexing stored documents).
Test retrieval document search using:
Transaction: SKPR07
Enter Document Class "DMS_PCD1", Language "EN", Document Class "DMS",and try "TEST search".
Regards,
Pradeepkumar Haragoldavar
Edited by: Pradeepkumar Haragoldavar on Jul 30, 2010 7:40 AM

TREX not working for e-recruiting with HTTP content server

We have a separate e-recruiting instance where we have only e-recruiting functionality installed. In this system we are using Storate type as "http content server instead of standard setting "SAP system database" for HR_KW content repository via transaction code "OAC0"
Following are the details
Document Area: HR_KW
Storage type : HTTP Content Server
Version no. 0046 Content Server version 4.6
HTTP server vd24cs02.sce.com
Port Number 8080 SSL Port Number
HTTP Script archive
Phys. path /usr/sap/N09/SYS/global/
Points to be noted:
1) TREX Search functionality for Job postings etc is not
working with this setting, however if we use HR_KW_CONT (storage type=03 SAP System database) , above mentioned functionalities work. We observed that xml files required for TREX search are also not getting created when we change the settings.
2) We observed that when we change the storage type the indexing job is successful but application log shows some failures in reading/modifying xml files
Please let me know what are the settings/ procedure to use a different storage type instead of standard setting delivered with the product. Anything related to the setting for above requirement

Hi All,
I may have a similary problem but I'm not entirely sure.
I have been tasked with setting up a simple java servlet to authenticate against a BOXI (Business Objects) server, from my tomcat server (tomcat 5.5) on my windows XP desk top machine. I will add more info on this shortly.
I have been supplied with a krb5.ini file and the bscLogin.conf file as follows:
bscLogin.conf :
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required debug=true;
krb5.ini[libdefaults]
default_realm = ADF.SOMEWHERE.CO.UK
dns_lookup_kdc = true
dns_lookup_realm = true
default_tgs_enctypes = rc4-hmac
default_tkt_enctypes = rc4-hmac
[realms]
ADF.SOMEWHERE.CO.UK = {
kdc = DC90.ADF.SOMEWHERE.CO.UK
default_domain = ADF.SOMEWHERE.CO.UK

Trex install on content server

is it possible to search with trex in sap content server?
At the moment content server and trex are installed on the same server. R/3 is using the content server. And i successfull made an rfc connection to trex. What are the next steps for trex to search in the content server?

Hi Chris,
do you use the ContentServer in the DMS application? If yes, you need to index documents stored in the DMS_PCD1 docu category.
Regards,
Mikhail

TREX search in Content Server

Hey
I have a problem making TREX search for documents in my content server. I have made some Content Repositories where i want to perform my search.
What I have done so far, is to make a CM Repository for the Content Repository with Persistence Mode = DB and the Repository ID in Database = The repository i want to use in Content Server.
Then I have added this CM Repository to a index and restarted the servlet engine. When i search for the documents, I get no hits. I know there is nothing wrong with my TREX, cause i can search on File System Repositories.
Have i missed anything? The Content Repository is up and running, and i get successsfully on every test.
Please hit me back!
Best Regards
Kristoffer Engh

Hi,
Creating an Index
http://help.sap.com/saphelp_nw2004s/helpdata/en/73/66c090acf611d5993700508b6b8b11/frameset.htm
Before doing that you should check TREX Server Status:
System Administration->System Configuration->KM->Index Administration->Related links->TREX Monitor
If the status is ok, then create the index, assign data source (point your repository), define kind of service (search, search and classification, classification) and define scheduler.
Then in Index Monitoring you can check status of the index.
Also, in TREX Monitor you can display Queves and check status of the documents.
Patricio

Is TRex required to display content from Content Server in the Portal?

Hi all gurus!
A short question: do you have to have TRex (or any other search/index engine) when you want to display content from a SAP Content Server in the portal? Or does the content server has its own search/index engine?
Best regards
Benny Lange

Hi,
Sap content server can be added in the portal as an KM repository. So configuration is needed. But when finished you can open and look at the content server like they are normal KM folders. TREX on the other hand is advisable in order to have the means to quickly find something in your content server. Otherwise it is like any other stupid file structure. lots of files and lots of folders.
Depending on you portal version you need to install a bussiness pack for document managment to get the content server visable in KM
Greetz

Index Content server on ECC by TREX

Similar Messages

Maybe you are looking for