Index could not be created

Hi All.
I have instaled TREX and then declared the name server and port in visual admin and restarted portal
But still getting the error
Index could not be created; creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<trexhost>:<30201> is invalid (Errorcode 7213)
Any suggestions or procedure to integrate portal with TREX ?
Thanking You,
Rukmini

Hi,
if this is your exact error message:
creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<trexhost>:<30201> is invalid (Errorcode 7213)
Than you have not changes the value <trexhost> do your real trex name server host name.
And that's why all the lights in TREX monitoring from your application point of view must be red.
Best regards
Frank

Similar Messages

PARCONV phase Index could not be created ERROR

Upgrading Solution Manger 3.2 to 7.0 Windows Nt SQL Server 2000
We are in teh PARCONV phase now and getting errors regarding tables with missing indexes.
Example from PARCONV.ELG file:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONVERSION ERRORS and RETURN CODE in NCONV00.TS3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EEGT236 The SQL statement was not executed
2EEDI006 Index " " could not be created completely in the database
Long text:
    Cause
      It was not possible to create the index in the database.
      This could be caused by the fact that an index with the same name
      exists in the database, but it is unknown to the ABAP/4 Dictionary.
      Activating the index in the ABAP/4 Dictionary is possible, but it is
      not possible to create it in the database.
    System Response
    What to do
      For more information about the cause of the error, analyze the SQL
      error messages in this log.
2EEGT221 Creation of secondary indexes for table "BBP_PDHGP" failed
Long text:
    Cause
      There might be a SQL error.
    System Response
    What to do
      Check the SQL codes for errors.
2EEGT239 Error in step "BBP_PDHGP-STEP6"
2EEGT094 Conversion could not be restarted
Long text:
    Cause
      The conversion could not be restarted, i.e. it was not possible to
      continue the conversion at the point where it was interrupted.
    System Response
    What to do
      Information about the cause of the error can be found in the restart
      log.
2EEGT236 The SQL statement was not executed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have gone into se14 the index name exists but the index doesn't exist on the database. I've tried using the Create to create teh index on the databse but that fails with a name may already exist.
How to I clear these errors?
Thanks
Laurie McGinley

It appears on all the ABAP Dictionary: Restart Log List, that the same error is occuring on creating the secondary indexes...
Database error 170 at EXE
Line 1: incorrect syntax near '('
Same error occurs if I use the SE14 to "Continue Adjustment".
Note 1180553 u2013 Syntax error 170 during index creation on SQL 2000 and
Note 1346662 u2013 Avoid index creation errors in 7.0 EHP and higher upgrades.
Note 1365755 - Scripts to fix fillfactor issues on SQLServer 2000
These seem to be the key.... but...
I ran the scripts in 1180553 ... no change in the errors. In fact, there isn't a dbo.[TATAF~] table and the dbo.[TATAF] table doesn't have the 'With fillfactor" entry. So i wonder if I'm at a different phase?
I'm looking at 1365755 and think I'd like to give that one a try, but it says to unpack the ZIP file in the <upgr dir>\abap\bin directory. Well there isn't one. I have the upgrade dir \usr\sap\put and its subdirectories, but no \abap\bin dir.
So I'm not sure where to unpack this to give it a try.
Perhaps it would be better to go back to teh beginning of the UPGRADE (after PREPARE) and start again?
I didn't upgrade to SQL Server 2005 because the version of SolMan we are on isn't certified on it, so thought I'd get through the Sol Man upgrade then do SQLServer 2005... maybe need to rethink this to?
I'm open you suggesions, ideas, answers!
Thanks
Laurie McGinley
Edited by: Laurie McGinley on Sep 28, 2009 12:23 PM

Trex Index could not be created HTTP server error: 503 (Errorcode 7266)

Hi Friends,
I have installed EP6.0 SP15 on one machine and Trex 6.1 on another machine.All the services are green in the Trex monitor.And also i am able to get a reply from http://host:30205/TrexHttpServer/TREXISAPIExt.dll?CMD=PING.Connection sucessful.While creating my first index in Index Administration i get this error message.
"Index could not be created; creating index failed: HTTP server error: 503 (Errorcode 7266)."
Please tell me as to what steps i am missing and also where can i see the log message in portal.
Thanks
Sidharath

hi friends,
I went through the settings of trex services on server and found out that even after installing IIS 6.0 it was showing the path of Apache that that is i think the reason that httpserver is green but it is not using the CPU resources.I will share the setting with you.
[queueserver]
executable=TREXQueueServer.exe
arguments=-port 30204
startdir=C:\usr\sap\trex_02
starttime=5000
instances=1
#hp_32:environment=_M_ARENA_OPTS=1:256,_M_SBA_OPTS=512:100:16
As the executable for queserver is there so it is using cpu resources.
[apache]
executable=httpd
arguments=-d C:\usr\sap\trex_02/Apache -R C:\usr\sap\trex_02/Apache/libexec -F
startdir=C:\usr\sap\trex_02/Apache/bin
instances=1
As there is no folder for apache in trex installation so i think it is not working.Please check the setting in Trex Administration->Configration->Choose name server and on the right botton of it is edit services.Double click it and you will see the settings as i have shown above.Please share the settings with me as i will be then able to work with trex.
Do i have to install Apache instead of IIS6.0.Please guide me.
Thanks
Sidharath

"Index could not be created: There are no active http servers known at the

Above error shows up during Index creation on KM section of the portal.
Checked the TREX Admin tool for Http connection . Pop up Error saying "IIS not installed. Configuration of Http communication not possible ".
Environment : TREX 7.1 revision 43 on Windows 2003 64 Bit platform.
During installation of standalone TREX , there were no option to select "http server".
Please suggest, if i am missing some thing in the setup or configuration here.
Thanks in advance .

1.) You need to make sure that the server you are installing TREX on, also has a Web Server. In your case, Internet Information Services (IIS 6.0) which comes with Windows Server 2003. Once this is installed make sure that it is working (http://hostname or IP).
2.) TREX 7.1 Rev 43 is very mature and does not involve many steps during installation. Your only option is to choose whether you want to install it or not.
3.) Setup of the "http connection" or "ABAP connection" is done after TREX installation. This is done straight from TREX Administrator.
Here is my suggestion:
1.) Install IIS 6.0 (http://www.windowsreference.com/windows-server-2003/step-by-step-guide-how-to-install-iis-60-in-win-server-2003/)
2.) Reinstalling of TREX is higly recommended but you can try it with the current installation.
3.) Open up TREX Administrator (trexadmin.bat) and proceed with create IIS Websites for TREX 7.10. The steps are located under the heading "Configuring the TREX Web Server" in the installation document.
4.) After this, go on with Indexing.
Regards,
Ravi

TREX error Index category could not be created: Exception 8,Error

Hi,
I am geting the error while creating the index on TREX 6.1. In t-code SKPR07 I have check the application log and got the following error and I am not able to create the index. Moreover I have check all setting as per installation document its looking fine. Please help me.
<b>error:-
Index category could not be created: Exception 8, Error
Message no. INDEXING015
Diagnosis
An error occurred when a new index category was generated using the
function module SRET_IDXCAT_CREATE.</b>
Thanks,
Harshal

Hi Harshal,
i just found your Question here, while I was searching the SCN for a solution. Because I had the same Issue.
In the SAP Support Portal I found the SAP Note 1512896 - KPro: Index category could not be created.
Take a Look at it. I guess, that could solve your problem (if it´s still exists)
Regards
André

Error: Could not complete Create LOV Dialog Window...

Using Jdeveloper 10.1.2 UIX to drop a MessageLovInput onto an Input Form I get the following error:
Could not complete Create LOV Dialog Window because it would result in an invalid document.
Clicking on details reveals the following:
oracle.bali.xml.model.XmlInvalidOnCommitException: Errors
Errors:
Element text not defined in parent contents [node = text ]
invalid subtree:
<contents>
<text text="Find the collection (which contains the legal values for the lovInput) in the Data Control Palette. Select the attribute (of the collection) that will be set by the lovInput and drop it into this space as a 'LOV Table'. " />
</contents>
     at oracle.bali.xml.model.XmlModel._validateSubtree(XmlModel.java:2646)
     at oracle.bali.xml.model.XmlModel._validateDocument(XmlModel.java:2583)
     at oracle.bali.xml.model.XmlModel.precommitTransaction(XmlModel.java:1467)
     at oracle.bali.xml.model.XmlModel._validateInCommit(XmlModel.java:2538)
     at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:531)
     at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:516)
     at oracle.cabo.ide.adf.LovModelXml._createLovPage(LovModelXml.java:125)
     at oracle.cabo.ide.adf.LovModelXml.createControl(LovModelXml.java:55)
     at oracle.cabo.ide.adf.UixModelXml.populateFragment(UixModelXml.java:165)
     at oracle.cabo.ide.adf.UixAdfDocumentFragmentProvider.preInitializeNode(UixAdfDocumentFragmentProvider.java:38)
     at oracle.bali.xml.model.datatransfer.XmlKeyDocumentFragmentProvider._createDomNodeFromKey(XmlKeyDocumentFragmentProvider.java:97)
     at oracle.bali.xml.model.datatransfer.XmlKeyDocumentFragmentProvider.createFragment(XmlKeyDocumentFragmentProvider.java:38)
     at oracle.bali.xml.model.XmlModel.getImportedDocumentFragment(XmlModel.java:1771)
     at oracle.bali.xml.model.XmlModel.getFragmentForImportIfPossible(XmlModel.java:1801)
     at oracle.bali.xml.model.XmlModel.importData(XmlModel.java:1078)
     at oracle.bali.xml.model.XmlView.importData(XmlView.java:773)
     at oracle.bali.xml.gui.swing.dnd.ModelDropHandler._transferData(ModelDropHandler.java:624)
     at oracle.bali.xml.gui.swing.dnd.ModelDropHandler.drop(ModelDropHandler.java:235)
     at java.awt.dnd.DropTarget.drop(DropTarget.java:398)
     at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:542)
     at sun.awt.dnd.SunDropTargetContextPeer.access$800(SunDropTargetContextPeer.java:52)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:805)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:743)
     at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:29)
     at java.awt.Component.dispatchEventImpl(Component.java:3494)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:3269)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3123)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Opening the UIX page, the following code has been generated; not a <listOfValues> tag in sight!
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40"
expressionLanguage="el">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title=""/>
</metaContainer>
<contents>
<body>
<contents>
<form name="form0">
</form>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

</handlers>
</page>
I have checked Metalink but can't find this error there either. Based on examples on OTN I have tried to create the LOV window manually but it does not work as expected:
1) The window is not empty when opened - i.e. data has been retrieved.
2) The filtering does not work.
3) The selected value does not update the Input Form.
I have pasted the code below in case anyone can point me in the right direction to work around the Jdeveloper error. However, I think Jdeveloper should create the LOV window correctly.
Thanks in advance for your help.
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40" expressionLanguage="el">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui">
<provider>

</provider>
<contents>
<document>
<metaContainer>

<head title=""/>
</metaContainer>
<contents>
<body>
<contents>
<listOfValues title="Organization"
searchText="Enter search string here">
<contents>

<table model="${bindings.OrganizationView1}" id="OrganizationView13">
<contents>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Name')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Name}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Address')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Address}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Url')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Url}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Phone')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Phone}" columns="10" readOnly="true"/>
</contents>
</column>
</contents>
<tableSelection>
<singleSelection model="${bindings.OrganizationView1Iterator}" text="Select and ">
<primaryClientAction>
<firePartialAction targets="OrganizationView13" source="OrganizationView13" event="select"/>
</primaryClientAction>
</singleSelection>
</tableSelection>
</table>
</contents>
<filterChoice>
<choice name="filterBy">
<contents>
<option text="Name" value="name"/>
<option text="Address" value="address"/>
</contents>
</choice>
</filterChoice>
<headerInstructions>
</headerInstructions>
<searchInstructions>
</searchInstructions>
</listOfValues>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>

<event name="goto sort" source="OrganizationView13">
<invoke method="handleTableUiEvent" javaType="oracle.cabo.adf.rt.AdfUtils">
<parameters>
<parameter javaType="oracle.adf.model.binding.DCIteratorBinding" value="${bindings.OrganizationView1Iterator}"/>
<parameter javaType="oracle.cabo.servlet.expl.ControllerImplicitObject" value="${uix}"/>
</parameters>
</invoke>
</event>
<event name="select" source="OrganizationView13">
<set target="${bindings.OrganizationView1Iterator}" property="currentRowIndexInRange" value="${ui:tableSelectedIndex(uix, 'OrganizationView13')}"/>
</event>
<event name="lovFilter">
<compound>
<invoke method="setWhereClause" javaType="oracle.jbo.ViewObject" instance="${bindings.Name.viewObject}">
<parameters>
<parameter javaType="string" value="${empty param.filterBy ? 'NAME' : param.filterBy} LIKE '${param.searchText}'"/>
</parameters>
</invoke>
<invoke method="executeQuery" javaType="oracle.jbo.ViewObject" instance="${bindings.Name.viewObject}"/>
</compound>
</event>
</handlers>
</page>

Thanks for the response. OK... This is the first day I have been able to get back to the problem.
My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
Again thanks for taking the time to respond to this issue.

HT3350 what can you do when you get this warning? "Scouting Book Collection Index" could not be handled because Numbers cannot open files in the "Numbers Document" format.

“Scouting Book Collection Index” could not be handled because Numbers cannot open files in the “Numbers Document” format.

This file was created in 2002 in MSword but this had been forgotten.
When I went to open it.... (MSword) was not a program option on my laptop. For some reason, I assumed that either Pages or Numbers wouild open the file. How the file was created was forgotten and had no file Info, but I new that it was a table of valuable information.
The warning threw me off, because it led me to believe that it was a Numbers file. which Numbers would not open. A paradox.
I took the file to a laptop in OSXpanther with MSoffice and it opened in MSword. Problem Solved.
Thank you for your help.

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

I am having issues with Time Machine. Error message "The backup disk image could not be created.

Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
TM sees it and it is mounted but cannot go any further. HELP?!!!!
Thanks
-A

How should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
I can usually fix most my comp problems myself, but this new ExHD has stumped me.
Thanks for your help.
-A

I'm having trouble backing up my second macbook to a new time capsule. continue to get an error message -- "Time Machine Error. The backup disk image could not be created." Is there something I need to change in my time capsule or time machine?

I just set up a new time capsule. it worked fine on my first macbook. But now I cannot backup my second macbook. Getting "Time Machine Error" "The backup disk image could not be created." Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?

Try #C9 in Pondini's Time Machine Troublshooting
http://pondini.org/TM/Troubleshooting.html

PO could not be creating using the Enjoy-BAPI

Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan.

Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan.

Training & Event Management Course type ** could not be created Message no. LSO033

Dear Gurus;
I'm trying to record a Business Event Group through S_AHR_61011889 - Business Event Group , then a Business Event Type through S_AHR_61011888 - Business Event Type.
Actually when I'm recording the data of the Business Event Type then I save i get a message stating
Course type **** could not be created
Message no. LSO033
to be able to save the event type I have just to record its name and the capacity then after saving I have to select change "F6" and record each data infotype separately, something which is not logical for the users.
Even when they make change and record the remaining Infotypes like the description then they select display what they've recorded doesn't come
Does anyone know how can I fix this?
Thanks in advance.
Best Regards;
Lobna

Dear,
Looks like has issue in authorization access, verify and fix it.
Regards,
TG

Is there a way to fix 'Sent mailbox could not be created?'

I have OS 10.8.5 and am using Mail as the mail program, since November. I have not had this problem before. I have four accounts in mail, iCloud, Gmail, Roadrunner and Earthlink. The main one i use is Gmail. Today i noticed that there was an exclaimation point next to my Gmail Sent mailbox. i opened the mailbox and it showed only one sent message that i sent earlier today. There should have been a few months of mail in the mail box, maybe 30 to 50 messages. i clicked on the exclaimation point and the message said:
The Sent mailbox could not be created on the mail server. The local "Sent Messages (Gmail) mailbox was created instead. Mail has changed your account's Mailbox Behaviors preferences to use the local "Sent Messages (Gmail)" mailbox.
i don't know what this even means. My other account mailboxes have their mail in them, only the Gmail mailnbox is not created (although it does have that one message in it). There wasn't anything different i did that would change any preferences that i know of. I see the Gmail Sent messages mailbox at the bottom of the mailbox list and the missing messages are there, but instead of listing the name of the recipient under a To: column, instead there is a From: column, and my name is all that is listed. There is no To: column. I need to know who the messages were sent to if i need to search for one later. i want the recipient to be idendified in the header, as it is in my other Sent mailboxes.
There is one thing that happened right before this occurred. I got a brand new Time Capsule and replaced my very old Airport Extreme with it. I didn't change anything. i just replaced the old base station with the new one, keeping all settings, network names and passwords the same, i just switched the hardware.
After setting up the Time Capsule, when i checked my email, i found this problem with my Gmail mailbox missing.
I found this problem raised in a few other postss on these discussion forums, but there was little or no discussion on the threads. None of them mentioned a new Time Capsule. i'm hoping someone who reads this can say what might have caused this and where the mail box is, and how to get it back.

Glenn--thanks for the reply. I think i tried your first suggestion---i highlighted the Gmail account Sent mailbox and went to the Mailbox menu, went to 'Use this mailbox for,' but all of the four options were grayed out (Sent, Junk, Trash, Drafts). i tried highlighting (or selecting) other mailboxes in the column on the left, including the ones on the server and the ones 'on this mac.' No matter which one i selected, the options were grayed out. Do you know why they would be grayed out? Am i not understanding what to do, or is there some other reason? i'm in Classic mode, in case that matters as to what's in the left column.
I have not yet tried disabling the Gmail account. i was going to, but when i went to Preferences > Accounts > Gmail, i saw and remembered that i had changed one of the settings not long ago, a week or so--where it says "Use only this server" under Outgoing Mail Server (SMTP) i had unchecked 'use only this server,' since none of the other accounts had that checked. So i rechecked it and am wondering if that would protect against what happened.
I feel nervous about disabling the account and removing it from Mail and wanted to ask you, will everything come back when i re-enable it?
Thanks

COREid Federation Error: A local user session could not be created for the

Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: A local user session could not be created for the assertion
Please help me to solve this issue?
Note: The Web agent runs on the web server instance 8887.
SiteMinder is able to protect the resource when accessed.

Typically that error occurs when the destinations access management system can't find the user based on the SAML attribute. Check to make sure that the attribute that you are matching on matches exactly.

RFC destination BW could not be created in the source system R3073

I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
RFC destination BW could not be created in the source system message number R3073
Why is this happening? The connection tests just fine.
I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
Any ideas?
thanks

Hi,
I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
Create your BWDEV RFCDEST manually in your BWQA .
Perform test and authorization test within SM59 from both sys.
When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
hope this helps...
Olivier.

Index could not be created

Similar Messages

Maybe you are looking for