Index does not exist in database system DB6 sap

Hi All
In development system i have added a field into already existing index and activated successfully without any errors or warnings and after transported the TR into Quality system,In Quality system it shows the warning Index does not exist in database system DB6 sap
Thanks
Vamsi

Hi Mohan,
After any change in the existing structure of the table you need to adjust and then activate it.
It can be done using SE14 tcode, please try using this.
Regards,
Mohammed

Similar Messages

Index does not exist in database system DB6

Hi,
Problem : Index does not exist in database system DB6.
I need further explanation why when i transport index from Development Client to Production Client the index is active but does not exist in database system DB6.
So when the cases is occurs i must re-create the index again in Production Level...
Can someone give me some ideas?
Thanks.

Hi,
it might be due to some BUG in RDBMS...
First Check the Secondary index in TEST system
Look at the Transport Number in DEV system, If this is having error, then it will show you the error details also,
If that not moved Properly then you need to create another request for the INDEX and move it again
See the threads with similar problem...
Warning: Index does not exist in database system MSSQL
Index does not exist in database system ORACLE??????
Re creation of database index
Hope it will solve your problem...
Reward Points if useful
Thanks & Regards
ilesh 24x7

Warning: Index does not exist in database system MSSQL

Hi,
After activating the Index from SE11,
I receive the following Warning:
Index does not exist in database system MSSQL.
What does this mean? Has performance been increased or does the index 1st have to exist in the database system MSSQL?

When you create index at SE11 and you need activate database utility.
utilitities-database utility->then click activate and adjust database.
else you can use SE14 and so that Index will create databse level.
Reward Points if it is helpful
Thanks
Seshu

Index does not exist in database system ORACLE??????

Hi Experts,
I created a Secondary Index in DEV, its fine and the message is,
Index KNA1~Z01 exists in database system ORACLE
I moved it to TEST and there I got the message is like,
Index does not exist in database system ORACLE
So,
1 - Wht I hv to do now? Shuld I see BASIS people?
2- Why its happened like that? Coz of not enough space?
ThanQ.

thanq sudheer,
I got the return code as 4, so Can I go for creation of new request and there by moving to test?
1 - Anyways, so, after Activating Seconadyr Index, Shuld I come back and Do I need to activate the Table also?
or
2- Just activating the index is enough?
thanq.
Message was edited by:
Srikhar

Index Does Not Exist In Database System MSSQL

Hello,
I have an Index that has this message:
" Index Does Not Exist In Database System MSSQL"
Can someone guide me how to update Index to the database?
Thank you.

Check this thread:
missing primary index
Otherwise, a few more informations would help! Thanks.

Index does not exist in database system MaxDB

Hi!
Could some one tell me what can I do with this error message.
This message is in Prod, it doesn't happen in Qas and Test environment. The Database and sap was down and up again.
The Index was active in prod. again.
I really need help.
Thanks in advance

Dear Mr. Rodriguez,
You wrote that the problem occurred on the PROD system.
Are you SAP customer?
If you are SAP customer plese see the SAP notes::
928037 FAQ: MaxDB Indexes
940420 FAQ: Database structure check (VERIFY)
990602 FAQ: CCMS for MaxDB/SAP liveCache technology
896023 Incorrect CREATE INDEX statement in DFACT.SQL
767598 Available documentation
If you are SAP customer, please create the ticket on queue BC-DB-SDB for
your issue.
Please review the Rules of Engagement at
Welcome and Rules of Engagement
Please provide more information to get clear on your problem:
-> What is the database version?
 < dbmcli -d <SID> -u control,<control> show version >
-> What were the errors in the knldiag* files?
-> If you restarted the database ones, it will be helpful to
 review the knldiag.old file for additional information.
-> Please run Database structure check & review the results.
Thanks you and best regards, Natalia Khlopina

Primary index does not exist in database but shows in SE14?

I added a couple of key fields to a Z table and activated it. Every thing went well - adjusted it with SE14 also.
When I checked the Runtime object - it is OK.
When I checked Database Object, it is showing that the Primary Index does not exist in Database but SE14 says that the Priamry Index exists in Database.
Please advise how to correct this. I saw another psoting when I searched per this error message: "Indexes: Inconsistent with DDIC source" . It tells to create this index at Database but need to know the steps.
pl advise.
(reposting here)
Edited by: Venkatabby on Mar 26, 2008 4:05 PM

hi,
To create a index for a table,
go to se11->click on Indexes tab and create a primary index.
Indexes speed up data selection from the database. They consist of selected fields of a table, of which a copy is then made in sorted order. If you specify the index fields correctly in a condition in the WHERE or HAVING clause, the system only searches part of the index (index range scan).
The system automatically creates the primary index. It consists of the primary key fields of the database table. This means that for each combination of fields in the index, there is a maximum of one line in the table. This kind of index is also known as UNIQUE.
If you cannot use the primary index to determine the result set because, for example, none of the primary index fields occur in the WHERE or HAVINGclauses, the system searches through the entire table (full table scan). For this case, you can create secondary indexes, which can restrict the number of table entries searched to form the result set.
You create secondary indexes using the ABAP Dictionary. There you can create its columns and define it as UNIQUE.
reward points if useful.
regards
sandhya

Setup solution database - "2007 index does not exist"

Hi all,
after setting up the solution database following the Implementation Guide on a Solution Manager 7 SP 19 system, I created some test problem and solution articles and linked them.
When I try to do now a full compilation for the first time via SAF Diagnosis, Goto > Indexes, then the error message "2007 - index does not exist" comes up.
So, I checked the customizing and did the customizing again. I assigned the Knowledge Base SDB to a higher level than its sub knowleged bases SDB Problems, SDB Solutions like this:
SDB
- SDBATTACHEMENT
- SDBICS
- SDB PROBLEMS
- SDB SOLUTIONS
- SDB SOLUTIONS DOC
Anyway, the same error message
I checked some threads but it didn´t help so far.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1583639050DB00866280264985025627End blog=/pub/wlg/7522
Did anyone solved this issue?
How can I activate the index?
Any hints/ ideas are highly appreciated.
jan

Hi guys, just to get the thread up.. quite important.
Is there anyone who can share some ideas?

FATAL: Database "myDB" does not exist in the system catalog.

hi there everyone,
just having a problem to create a database in the system catalog.
i am a beginner to JDBC.
i have created a database by using ''create database myDB'' under cygwin (winXP).
but still getting the error.
so am i doing it right??
FATAL: Database "myDB" does not exist in the system catalog.
my java code
String url = "jdbc:postgresql://localhost:5432/myDB";
thx in advance

ok,,, i've solved the problem...
when i '' create database myDB'', it actually crreated ''mydb'' instand of ''myDB'', so myDB does not exist.
also need to connected to mydb not in template1..... stupid me.

Short dump 'Table does not exist in database'

Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following   Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num   = :p_matnr and
                model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
    Table does not exist in database.
What happened?
    The table or view name used does not
    exist in the database.
    The error occurred in the current database connection "DEFAULT".
What can you do?
    Check the spelling of the table names in your report.
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
     caught in
   procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.

Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions.

LOG BZA= table PATCHHIST does not exist on database

Dear Friends,
I am installing SAP R/3 4.7 using import method and in the last step of the installation RFC logon module (post procesing) getting the error FRF-00063 RFC logon failed with invalid interface.
below is the R3trans log
4 ETW000 Connected to DBMS = DB6 --- DB2DBDFT = 'TST' --- SYSTEM = 'SPP'.
4 ETW000 [dev trc     ,00000] { db_rtab( fcode = 'RT_INSERT', tname = 'PATCHHIST' ) {saprel.c:1350}
4 ETW000                                                                             163 0.755328
4 ETW000 [dev trc     ,00000] *** ERROR in prepareStatement[dbdb6.c, 12112] CON = 0 (BEGIN)
4 ETW000                                                                            1743 0.757071
4 ETW000 [dev trc     ,00000] &+     DbSlModifyDB6( SQLExtendedPrepare ): [IBM][CLI Driver][DB2/AIX64] SQL0204N "SAPTST.PATC
HHIST" is an undefined nam
4 ETW000                                                                              32 0.757103
4 ETW000 [dev trc     ,00000] &+     e. SQLSTATE=42704
4 ETW000                                                                              19 0.757122
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              19 0.757141
4 ETW000 [dev trc     ,00000] &+     INSERT INTO "PATCHHIST" ( "EXECUTABLE", "SAPRELEASE", "HOSTNAME", "PLATFORM", "DBVENDOR"
, "TIMESTAMP", "PATCHNO",
4 ETW000                                                                              20 0.757161
4 ETW000 [dev trc     ,00000] &+     "DBSLPATCHN" ) VALUES( ?, ?, ?, ?, ?, ?, ?, ? )
4 ETW000                                                                              29 0.757190
4 ETW000 [dev trc     ,00000] &+       cursor type=NO_HOLD, isolation=UR, cc_release=NO, optlevel=5, degree=1, op_type=15, re
opt=0
4 ETW000                                                                              33 0.757223
4 ETW000 [dev trc     ,00000] &+       ABAP location info: '', 0
4 ETW000                                                                              30 0.757253
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              19 0.757272
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              19 0.757291
4 ETW000 [dev trc     ,00000] *** ERROR in prepareStatement[dbdb6.c, 12112] (END)
4 ETW000                                                                              28 0.757319
4 ETW000 [dbtrtab     ,03967] ***LOG BZA=>table PATCHHIST does not exist on database [dbtrtab#5 @ 3967]
4 ETW000                                                                              38 0.757357
Kindly help me in resolving the issue.
Thanks and Regards,
Seshu

Hello Seshu,
the table should be there, so maybe there was an earlier problem durint the installation.
Go to the directory containing the installation logs and search for errors, e.g.
grep -i PATCHHIST *.log
Regards,
Mark

Table TTZDF does not exist on database

HI forum
i am installing the last SAPIDES Ehp3 Linux / Maxdb during the process of installation all job were imported sucessfully 32 of 50 , in the phase CHECK DDIC PASSWORD, the system can´t do log in.
Review the log in the work directory (dev_w0) the follow message is generated.
A Sat Jun 12 21:19:56 2010
A **GENER Trace switched off ***
B dbmyclu : info : my major identification is 3231713892, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is CF0B144C2E40F845E1000000C0A00A64.
B dbmyclu : info : current optimistic cluster level: 2
B dbmyclu : info : pessimistic reads set to 2.
C
C Sat Jun 12 21:20:15 2010
C *** ERROR =>   prepare() of C_0063, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
C sc_p=0x2b4da28435b8,no=63,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x19449e10,table=TTZDF
C SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
C   WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" WITH LOCK ISOLATION LEVEL 1;
B ***LOG BZA=> table TTZDF      does not exist on database R/3
B *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
C *** ERROR =>   prepare() of C_0063, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28435b8,no=63,idc_p=0x2b4da2909220,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x19449e10,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:26 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(95) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(95) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=(nil),con=0,act=0,slen=190,smax=256,#vars=1,stmt=0x1944e480,table=TTZDF
C SELECT "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "TIMETO" FROM "TTZDF"
C   WHERE "CLIENT" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" WITH LOCK ISOLATION LEVEL 1;
B ***LOG BZA=> table TTZDF      does not exist on database R/3
B *** ERROR => Buffer loading failed: {fcode=293, rc=32, cnt=0, table='TTZDF'}
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:28 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:30 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:20:31 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:18 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:21 2010
C *** ERROR =>   prepare() of C_0065, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da28436e8,no=65,idc_p=0x2b4da2909350,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x1944e480,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
C
C Sat Jun 12 21:21:29 2010
C *** ERROR =>   prepare() of C_0066, rc=1, rcSQL=-942 (POS(114) Unknown table name:TTZDF)
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(114) Unknown table name:TTZDF)
C sc_p=0x2b4da2843780,no=66,idc_p=0x2b4da29093e8,con=0,act=0,slen=199,smax=256,#vars=2,stmt=0x194421a0,table=TTZDF
C SELECT /*+ KEYACCESS */ "CLIENT" , "DSTRULE" , "YEARACT" , "DATEFROM" , "TIMEFROM" , "DATETO" , "T
C IMETO" FROM "TTZDF" WHERE "CLIENT" = ? AND "DSTRULE" = ? ORDER BY "CLIENT" , "DSTRULE" , "YEARACT" ;
B ***LOG BZA=> table TTZDF      does not exist on database
B *** ERROR => missing return code handler
abtstmp#?[613] does not handle return code 2 from dbcrtab#10[1764]
==> calling sap_dext to abort transaction
M ***LOG R47=> ThResFree, delete (001024) .
I search notes and in sdn forum any information about this error, but there isn´t information.
How i can solve this inconsistence durant the installation for finish the SAP IDES installation.
Hi forums
cheking the process of the installation, the problem i wait have it solve doing the reinstallation with any adjust in the database release .. i will be comment the process to the solution.
Jairo

thie process was solved with a new installation-

Se14 message : View Does not exist in database

Hi All ,
I have created view and transported to test system , In the test system i am not able to activate it , the message is that " view does not exists in database ", Is it some thing for the basis to do .
Thanks in advance
Vinay

hi,
Have you tried to re register your database within OEM, CG

Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.

Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

TREX "Index does not exist" in TrexQueueServerAlert.trc

Hi Portal Gurus
We have installed EP 6 SP9 + KM/CM, then upgraded to SP16, and installed TREX 6.1 with Patch 27 all on AIX 5.3. I cannot get the indexing to work, I get green lights for the index monitor and the crawler monitor finds the index but no documents are indexed ie. all fields 0's. I have the following error in the TrexQueueServerAlert.trc file:
CLIENT_TRACE TRexApiAdmin.cpp(04615) : TNS: getServer failed for index 'adrienne_test', function: 'getAttributeList'
CLIENT_TRACE TRexApiAdmin.cpp(04695) : Index does not exist;index=adrienne_test : return code: 2007
I also get the following error in the TrexIndexServer.Alert:
TrexNet Channel.cpp(00222) : ERROR: reading from 3 <my.ip.num.here:30001> failed with rc=14 (connection broken)
TrexNet Channel.cpp(00222) : ERROR: reading from 3 <my.ip.num.here:30001> failed with rc=14 (connection broken)
TrexNet BufferedIO.cpp(00440) : ERROR: read from 3 <my.ip.num.here:30001> failed - resetting buffer
TrexNet BufferedIO.cpp(00440) : ERROR: read from 3 <my.ip.num.here:30001> failed - resetting buffer
TNSClient.cpp(00448) : sendRequest to myhostname:30001 failed with NetException. data=[setinactive](S)client_
id=myhostname:30013.145012...
TNSClient.cpp(00448) : sendRequest to myhostname:30001 failed with NetException. data=[setinactive](S)client_
id=myhostname:30003.116748...
I have seen other threads for the above error that involves assigning the CM System for the TaskQueueReader which I have done but this has not solved the problem.
Points rewarded for answer that solves this issue.
Thanks
Adrienne

Hi Adrienne,
One more suggestion..
Trying to deactivate the Index management service and activating it back.
Steps:
1. Go to System Admin - system Config - KM - Global Services
2.Activate the "advanced mode" from the top level menu
3. Find "Index Management Service" and go inside.
4. Edit the same and remove the tick mark from "Active" field.
5. To view the change,Restart the J2ee engine. Now you Index management service in "inactive".
6. Check the Index Management Service. ( if available, it shouldnt)
7. Now activate the index management service again by placing the "tick mark" in the "Active " field and restart the entire service (j2ee,db, trex)
8. Now go the "Index Managment" and delete old indexes and its references.
9. Try creating a new index with a new data source.
10. Now it should work.
Regards,
venkat.
[Pls say the SDN way of thanks by rewarding points for all helpful answers]

Index does not exist in database system DB6 sap

Similar Messages

Maybe you are looking for