Index mentioned in AWR Report does not exist in the database
Hi,
I have a situation where the index object mentioned in the AWR Report is not present in the database. The object has not been dropped, is not present in the recyclebin either. The object name is mentioned as PK1_IDX in the report. The object with the name PK_IDX is present in the database. Any ideas?
Thanks
Charles
Xtreme wrote:
Hi,
Please let me add additional information.
The AWR Report section Segments by Physical Reads shows that a particular index object shown up in report as PK1_IDX has 72% of physical reads.
But the index object PK1_IDX is not present in the database
The index object with the name PK_IDX is present in the database.
SQL> select object_name,object_type,last_ddl_time from dba_objects where object_name like '%PK_IDX%';
OBJECT_NAME OBJECT_TYPE LAST_DDL_
PK_IDX 09-DEC-08
Does oracle create indexes at runtime with a names as PK1_IDX during execution?No, not a thing that I know of. As I said, can you trace the query ans see if its truly using that said index?
Aman....
Similar Messages
-
Licecache table missing Table MATRIXINDE does not exist in the database wit
Hello,
We recently done a system copy of our APO system, everything went well. in case of Livecache there are 2 problem
1) when we do the integration for LCA/LDA/LCA while we mentione the Livecache server it is not taking the host name , it is only picking the IP address of the livecache server. If we tried host name, it times out.
2) once we give the IP address as livecache server we can start the live cache server. Bure there is only two tables in it
when we run
transaction Livecache Check (/SAPAPO/OM03) we get the erro i.e.Table MATRIXINDE does not exist in the database with ID LCA
runtime error DBIF_RSQL_TABLE_UNKNOWN
When we look into the tables there are only 2 tables in it
AAPSYSNAME
LCA_WARNINGS
when I compare with other system...it is missing a lots of other tables..
We did re-initialized the livecache.
Appreciate your help in thisHello Sudhir,
1) Did you create the SAP ticket where this issue is reported?
2) It's good to know more details about the APO version, liveCache/LCA versions on your
source & target systems.
What note or document did you follow to do a system copy of our APO system?
3) Please pay attention to the recommendations in the SAP notes:::
877203 Post steps after the Homogenous liveCache copy usi u2026
886103 System Landscape Copy for SAP SCM
Thank you and best regards, Natalia Khlopina -
Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category ABAP Programming Error
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
ABAP Program SAPLCLVF
Application Component CA-CL-CL
Date and Time 11.06.2014 12:08:28
Short text
A table is unknown or does not exist.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCLVF" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A table is referred to in an SAP Open SQL statement that either does not
exist or is unknown to the ABAP Data Dictionary.
The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104 if dupl = kreuz.
105 insert auspc_v2 client specified from table auspcv2
106 accepting duplicate keys.
107 else.
108 insert auspc_v2 client specified from table auspcv2.
109 if syst-subrc ne 0.
110 message a585 with tabausp.
111 endif.
112 endif.
113 refresh auspcv2.
114 endif.
115 read table auspcv3 index 1.
116 if syst-subrc = 0.
117 if dupl = kreuz.
118 insert auspc_v3 client specified from table auspcv3
119 accepting duplicate keys.
120 else.
121 insert auspc_v3 client specified from table auspcv3.
122 if syst-subrc ne 0.
123 message a585 with tabausp.
124 endif.
125 endif.
126 refresh auspcv3.
127 endif.
128 read table auspnv1 index 1.
129 if syst-subrc = 0.
130 if dupl = kreuz.
131 insert auspn_v1 client specified from table auspnv1
132 accepting duplicate keys.
133 else.
>>>>> insert auspn_v1 client specified from table auspnv1.
135 if syst-subrc ne 0.
136 message a585 with tabausp.
137 endif.
138 endif.
139 refresh auspnv1.
140 endif.
141 read table auspnv2 index 1.
142 if syst-subrc = 0.
143 if dupl = kreuz.
144 insert auspn_v2 client specified from table auspnv2
145 accepting duplicate keys.
146 else.
147 insert auspn_v2 client specified from table auspnv2.
148 if syst-subrc ne 0.
149 message a585 with tabausp.
150 endif.
151 endif.
152 refresh auspnv2.
153 endif.Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano -
Table /xyz/abc does not exist in the database
Hi experienced developers,
I created two transparent tables in customer name space in development system, transport to quality together with program using the tables, everything fine, no errors, no warnings.
Then transported to production. No errors, no warnings. Detailed protocol shows tables have been activated, no errors or warnings.
First try to use the program gives a dump.
line 1191:
""/xyz/abc" is not defined in the ABAP Dictionary as a table, p"
"rojection view, or database view."
Double-click on the table in program code gives a popup information message
Table/xyz/abc does not exist in the
database
After acknowleding the popup, the usual dictionary entry is shown, table is active. Utilities -> database object -> Display leads to an empty screen
Fields of /xyz/abc
Fld name Position Data Type Length Decimals Not null Default
Indexes for /xyz/abcI
Utilities -> runtime object -> Display shows the table name followed by message
There is no active runtime object for ...
prededed by big icon exclamation mark.
We created a new transport with exactly the same result.
Basis people have no idea.
The only thing special (but OK I think) is that the tables have key fields only.
Database is Oracle 11.2.0.2.0, SAP ECC 6.0
SAP_ABA 701 0008 SAPKA70108 Cross-Application Component
SAP_BASIS 701 0008 SAPKB70108 SAP Basis Component
PI_BASIS 701 0008 SAPK-70108INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0005 SAPKITLRD5 SAP Solution Tools Plug-In
SAP_BS_FND 701 0009 SAPK-70109INSAPBSFND SAP Business Suite Foundation
SAP_BW 701 0008 SAPKW70108 SAP Business Warehouse
SAP_AP 700 0022 SAPKNA7022 SAP Application Platform
WEBCUIF 700 0009 SAPK-70009INWEBCUIF SAP WEBCUIF 700
Yes I know, this is a DDIC forum question but I hope for more (experienced) readers here.
Thank you all for any hint leading to a solution.
Best regards
Clemens LiHi,
thank you for the comments although it does not help.
Here is the excerpt from productive system import protocol (original table names replaced as customer requirement)
*** Activate objects at level 1
Too low cost (2.100) for parallel processing. Minimum: 6.000
* Synchronous execution, no parallel processing *
Activate table /xyz/abcd1
Table /xyz/abcd1 was activated successfully
Activate table /xyz/abcd2
Table /xyz/abcd2 was activated successfully
Synchronous processing: 4 sec., 2 objects, 2.100 costs
Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2
Objects not activated........................: 0
Activated objects with errors in dependencies: 0
Objects activated with warning...............: 0
Successfully activated objects...............: 2
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
Statistics on Activated and Deleted Objects
End phase 002 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: ENNIPROD_10
Return code..............: 0
Phase 001..................: 00:00:04 (Object Activation)
Phase 002..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:05
Date, time...............: 08.03.2012, 16:30:43
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20120308163043
Ended with return code: ===> 0 <===
Actually, I don' understand it.
Regards,
Clemens -
Table ZCHECKPICK does not exist in the database
Hi!
I have a table "ZCHECKPICK" no "MANDT - Client".
Then I inserted a field "MANDT - Client" and executed SE14 to "Active and adjust database".
The table is now "does not exist in the database" but the struture is ok.
What do i do to get the table in DataBase again?
<Priority normalized in subject line>
Edited by: Vinod Kumar on Sep 13, 2011 9:32 AMDear Clayton,
you can try a few things
1) generate/activate the table prior to call SE14.
2) after confirming that the table is well generated, go to SE14 and choose "Delete Database Table"
3) then, still on SE14, click on "Activate and Adjust database"
[http://imageshack.us/photo/my-images/607/20110913010743.jpg/]
That should fix it.
Kind Regards
/Ricardo Quintas -
Table Z does not exist in the database
Hi,
I have created a Z table and modified the DataType from NUMC to DEC and transported to Quality server
and it is giving an information error that (Table Z does not exist in the database) then once again
i modified the DataType from DEC to NUMC and transported to Quality server then still it is giving an information error that
(Table Z does not exist in the database) please help me out in this issue.
Thanks in advance.Hi Jayanthumer,
Have you Activated (Ctrl + F3) the Table in SE11 before transporting to Quality server ?
Try to activate (Ctrl + F3) the table in SE11 of your Quality server...
It may not be imported properly into Quality server...
Ask to BASIS person about errors/warnings while importing to Quality Server..
Also activate all dataelement and domains.... make sure all things are active...
Once you activate it then it will create the table in database... till then there will be no table in database...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
View-does not exist on the database
Hi Experts,
Our Data Source/Extract Structure (R/3) is based on a view.
There is an Issue with the View/DAta Source
If i go to SE11>view Name> Display then i am getting
'View ZART_ATTRS is not in the database' and then the next screen is the view definition
This is a database view which is defined in the ABAP/4 Dictionary but does not exist on the database. No data can be read for this reason
If i go to RSO2 and enter data source name and select display...
Then it will display data source status as 'Saved' how can i activate it
and i go to RSA6 select my Z data source which is based on the above view....context menu display data source/Check data source...when i get error
'Only Tables and views are permitted for extraction'
How can i overcome itHi,
As your view is existing in ABAP DICTIONARY , you need to take help of your DBA to get this created in the underlying database. This can be created using Database utility se14 transaction code. But it is good to have your DBA involved so that you have proper table space allocated to it.
Hope this helps..
Regards
Manga(Assign points if it helps) -
Error: SNAP_ADT does not exist in the database - manual check required
Hello Friends,
We are performing an upgrade+migration to HDB using the DMO option(Oracle to HANA).
We are getting below error in the phase MAIN_SHDCRE/SUBMOD_SHDDBCLONE/DBCLONE!
Also find the output of SE11 & SE14 attached.
SE14->
Please help us with the manual check.
Regards
SuryHi Sury,
In regards to the error below:
1EETGCLN Error: SNAP_ADT does not exist in the database -> manual check
required
1EETGCLN SNAP_ADT
1EETGCLN Table does not exist
Could you please try to activate the following tables via SE11?
- SNAP_ADT
Once they are activated, Could you please repeat the phase and update the result?
Thanks and Regards,
James Wong
Follow us:
SAP System Upgrade & Update Troubleshooting Wiki Space.
SAP Product Support Twitter ( Hashtag: #NWUPGRADE) -
Component 0DAT (version A) does not exist in the database
Dear experts
i got this error.
Component 0DAT (version A) does not exist in the database
http://static.flickr.com/20/71394172_655d295b7f_o.jpg
A SAP expert recommended
"Use BC to activate the variable 0DAT from InfoObject 0CALDAY."
but i can't find 0DAT.
http://static.flickr.com/35/71390830_1049df5c3a_o.jpg
my system is
http://static.flickr.com/35/71390831_c837af0b47_o.jpg
Thanks in advance
David.kang
Message was edited by: David Kang
Message was edited by: David KangMentor Eugene,
I guess the issues are related to "Sneak Preview version".
well, instead of creating new 0DAT,
i edited the RSZGLOBV table with 0DAT that i created before.
http://static.flickr.com/20/71437761_de16ddee16_o.jpg
http://static.flickr.com/34/71437760_5236824cc2_o.jpg
so two rows were changed. (from 6 to 4 ).
http://static.flickr.com/34/71437762_ed172b5577_o.jpg
<b> What do you think it is okay ? </b>
Finally, i can get rid of " Component 0DAT (version A) does not exist in the database " message.
therefore i expect everything goes well.
but ..
"Information No texts were maintained in language E for variable 0DAT " comes up.
Refer to the screenshot ( http://static.flickr.com/35/71439173_5c996d2111_o.jpg )
[Query Designer screenshot ]
http://static.flickr.com/34/71440191_b2a96a2ac4_o.jpg
[Material Number Master Data ]
http://static.flickr.com/34/71440190_a827c571ae_o.jpg
[Original Data file ]
http://safariexamples.informit.com/0201703661/IO_MAT_TEXT.csv
http://safariexamples.informit.com/0201703661/IO_MAT_ATTR.csv
mentor Eugene! thanks a lot.
with kind regards
David -
This query does not exist in the database in the system
I have created a query, but when I run it, I receive this error:
You have attempted to open query 0DAT from the Query Designer.
However, this query does not exist in the database in the system to which you have made a connection.
Thanks
Joseiltondear Joseilton,
the variable 0DAT ist not in active version in your system.
Use BC to activate the variable 0DAT from InfoObject 0CALDAY.
or
you have to create it in your system. therefor change the namespye to SAP-namespace (starting with 0). Open one Query in your system via RRMX and select CalenderDay to create a new variable.
name: 0DAT
descrition: current calender day
processed by: SAP EXIT
Characteristic: Calender Day
variable represents: Single Value
best regards
imberaureus -
"Delivery 80001021 does not exist in the database or in the archive"
hi,
i am creating delivery document and save the delivery but while I'm checking the delivery doc no the system is showing following error "Delivery 80001021 does not exist in the database or in the archive"
please help
thanks
amitAmit,
This problem is due to a program error. Talk to your devloper in order to solve it.
I copy & paste the below text or solution from OSS 993005. Check that for complete info.
Reason and Prerequisites
The problem is caused by a program error.
Solution
Implement the attached correction instructions.
After you confirm error message VL 559 "Delivery &1 does not exist in the database or in the archive", the system branches to either
the inbound delivery (DISPLAY) that was displayed or changed beforehand, or
the inbound delivery that has just been saved (also in display mode).
If no delivery was saved before you switched to 'Other inbound delivery', the original transaction is started again (for example: VL31N).
Regards,
Sats. -
Delivery 100000093 does not exist in the database or in the archive
Hi
I have created delivery and the delivery number also given, but i am getting error like Delivery 100000093 does not exist in the database or in the archive
the details are not in LIPS LIKP tables delivery numbers also not there.
Please tell me where was the wrong?
thanksHi Sarveswara ,
Please check assigned Number range to your Delivery Document whether complete range has been utilized.
Cheers !!!
Imzo
PLEASE DONT CLOSE THE THREAD WITH FUNNY CHARACTER -
SE14 Status-UPGRADE-Table does not exist in the database
Folks,
I have created a ztable with SPRAS and few Char fields and generated a table maintenance generator.In the Dev it is working fine but when I moved the TR to Q TR ended up with errrors "Generation of Programs and Screens".When I check in Q in SE11 I am able to see the table but with an error message "Table doesn't exist in the database".
SE14 Status for this table is getting shown as UPGRADE in Q.
Can anyone here throw some light on what exactly this status UPGRADE means and how it gets set in SE14.
In DEV,I had checked the DATABASE OBJECT>>CHECK>DISPLAY and RUNTIME OBJECT>>CHECK>>DISPLAY and it is showing Database object is consistent but where as the same in Q is showing "Table is not created in the Database".
K.Kiran.Hi.
Is Q system is newly copied? Also please check the transport order of the table creation request. Also check whether pwd of the DB user is locked?
Regards,
Vimal -
I have a Windows app that was built some 7 years ago on a WinXP machine using VS2005. It uses Crystal Reports for the reporting. We recently got new machines with Win7 x64 and I installed VS 2013 Pro. I moved the app to my machine and upgraded
it to that VS version. It previously had a .NET Framework target of version 2.0. I changed the target to version 4.5.
I want to use the MS Reporting instead of Crystal Reports. However, I cannot get the ReportViewer control to show up in the Toolbox.
I downloaded and installed the ReportViewer Runtime 2012. I installed the ReportViewer using the NuGen GUI and console. I tried adding the control to the Toolbox using Tools > Choose Toolbox Items... but it never shows up after I browse to
the Microsoft.ReportViewer.WinForms.dll file and select it. I manually typed 'Microsoft.Reporting.WinForms.ReportViewer' and the intellisense came up fine. But when I build the project I get the error shown in this post's title.
I'm at a complete loss. I've searched all over and tried everything I can find on the subject with no luck.
Can anybody help?
Thanks.Thank you for taking the time.
The Report Viewer will not appear on the Toolbox, even with references to that assembly. However the Crystal Reports viewer IS in the Toolbox.
I think it may be because Crystal Reports is installed and integrated? I don't know. I just can't get it to work.
Thanks again.
Hello,
From
ReportViewer Controls (Visual Studio), we could get that ReportViewer Controls are included in VS2013, that means we don't need to install that control manually.
To confirm whether this issue is related to your Visual Studio or Crystal Reports, I would recommend you consider testing it with the following ways.
1. Create a simple windows form application, and open a form designer window, and check whether reportviewer is inside the tool box.
If it is available, then we could focus on your project to narrow down this issue.
If it is still missing, we could test it with #2.
2. Uninstall Crystal Reports and disable all add-ins of VS2013, and if possible, you could also uninstall and reinstall VS2013 to make sure the environment is clean enough. Next repeat the steps of #1.
It will be much helpful if you could share the detailed results with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
"WEB_0ADHOC" does not exist in the master system
I inserted a query into report designer and made a few changes (font/adding columns, custom text) and when i'm trying to launch it in Portal ...this is the error msg i get
The initial exception that caused the request to fail, was:
The Web template "WEB_0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "WEB_0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:80)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:161)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:83)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:126)
In the web application designer, i tried to see if the WEB_0ADHOC is available or not ... this is the msg i get:
Diagnosis
You have attempted to open query ! from the Query Designer. However, this query does not exist in the database in the system to which you have made a connection.
System Response
Opening the query was terminated.
Procedure
Make sure that you have connected to the correct BW system. Note: The query may have been deleted by another user.
i even checked in the IMG setting to see if this is the default template for enterprise reporting and it is.
How do I make it available in the system.
Message was edited by:
voodi
Message was edited by:
voodiHello,
Someone changed the default templates in your system. WEB_0ADHOC is wrong.
Delete the entries and restart your java server (because of cache). This will reset the changes to default. All templates for new runtime must be visible in the transaction SE38, program RS_TEMPLATE_MAINTAIN_70. source code must begin with <bi:bisp ...
Regards, Karol
SAP NetWeaver BI, Development
Maybe you are looking for
-
Hi all; I am trying to delete the request from cube except the last load of the month(we have daily load now so assume that last day of the month) of the fiscal period. I am writing the following code in the delete routine, but can't figure out how t
-
I copy ant code from http://middlewaremagic.com/weblogic/?p=2504 and change it as follow. I use weblogic 10.3.4 New datasources can be created. However, the JNDI name is not complete. It doesn't contain jdbc/ <?xml version="1.0" ?> <project name="dep
-
Need help for access list problem
Cisco 2901 ISR I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4
-
Switch to English (Great Britain)
The default language for my D'Inc 2 was set to English (United States). I do live in the United States, but I prefer to use English (Great Britain) as my default language. Can I change the default language to English (Great Britain)?
-
Edit and save a Core Data entity?
Sorry if this is a fairly obvious issue, but I honestly can't find anything.. Every sample Core Data application I've come across has examples of inserting and deleting entities/objects. But I cannot find anything about editing and saving some attrib