INDEX on VIEW or TABLE when using CONTAINS function on the VIEW

Hi,
I'm querying a view with a contains function and I'm getting an error:
query: select * from view where contains(name,'jack OR jill')>0
ORA-20000: Oracle text error
DRG-10599 column is not indexed.
From what I gathered you can't create an index on the view, or is that possible afterall (using 10g).
Would it be sufficent to create an index on the column in the table that the view-query is pulling the data from? or can you use the contains funtion on views at all?
Or are there other ways of doing this better?
Thanks,

That particular CONTAINS clause will require a domain index on the column, NAME in your case.
You could also do: select * from view where name in ('Jack', 'Jill')
Depending on your need and number of records and other variables, it may be "fastest" to do the text index on the NAME column. If it is a rather small subset of data and performance is not critical then the IN clause should suffice.

Similar Messages

List Views displaying error - when using Lookup column for filtering ( which are indexed )

I'm trying to filter a large list that has more items than the list view threshold. The list has a lookup column that is indexed. If I try to filter by other columns, the view works fine as long as it returns fewer than 5,000 items. However, if
I try to filter by the lookup column, I get the error about not being able to display the items because the list is too large.
The views are returning items which are less than threshold value , but still I am seeing the same issue.I Created some pages and added this filtered views to the pages it is showing below error
This view cannot be displayed because it exceeds the list view threshold ....
IF I navigate the view in the list it's returning zero records with out any error page . But no records.
Is there a known issue with filtering large lists by lookup column? Any other troubleshooting suggestions? Everything I'm doing here is through the web interface.

Thank you for your reply. Yeah it’s default limit. But when I created view based on some filter condition on lookup column it’s not working.
For example:
Created a View based on Lookup column DEPT using filter condition Dept = HR , returned 1400 items
Created another View based on Lookup column DEPT using filter condition Dept=Admin , returned 3600 items
Adding this list view webparts to the page also working fine , displaying the results .
After adding one item to this list , both the views are not displaying any results. Now the count is 5001.(it exceeded the list view threshold)
The page where the list view web parts are added throwing the below error.
This view cannot be displayed because it exceeds the list view threshold (5000 items) enforced by the administrator.
To view items, try selecting another view or creating a new view. If you do not have sufficient permissions to create views for this list, ask your administrator to modify
the view so that it conforms to the list view threshold.
Learn about
creating views for large lists.
I am experiencing this problem only with lookup columns, Choice and site columns are working fine in this same situation .
Thanks,

How to hide system tables when using the Oracle SQL Developer?

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
Can anyone explain to me how to do these things?
Thanks,

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
Kuljeet

I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them ... can anyone help?

I have a mac OSX desktop version 10.6.8 and all of a sudden I can't get a full screen view in Safari when I ask for help the response is use the arrows on the top right of the screen ... I don't have them ... can anyone help?

Hi Mary,
I don't remember those arrows in 10.6, only 10.7 & up!?
I have 10.6.8, as you do. To make your Safari full screen, make sure you have the left hand side of your safari page moved all the way to the left. Then move your cursor to the BOTTOM RIGHT CORNER of the safari page, and simply drag your page towards the lower right hand corner of the screen. NOTE: you will see a series of lines on the bottom right corner of the page, indicating where to place you cursor arrow.
By wuzradioman here...
https://discussions.apple.com/thread/4218928?start=0&tstart=0

When using FireFox I often cannot view pictures in Hotmail, but have no problem when using other browsers

When using FireFox I often cannot view pictures in Hotmail emails, but I have no problem when using other browsers

Do you also have this issue if you temporarily switch to Private Browsing mode?
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Select: [X] "Always use private browsing mode"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/fix-login-issues-on-websites-requrie-passwords

[svn:fx-trunk] 8961: Fix View Source Window when using a Spark Window.

Revision: 8961
Author:   [email protected]
Date:     2009-07-31 11:08:29 -0700 (Fri, 31 Jul 2009)
Log Message:
Fix View Source Window when using a Spark Window.
Turn off the status bar for a Spark Window that is created for View Source.
QE notes: None.
Doc notes: None.
Bugs: SDK-21770
Reviewer: Ryan
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21770
Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/WindowedApplication. as

I had downloaded it for test, and requested for evaluation license...
But I haven't got license, and also I am not able to find Flash Builder Plugins from HFCD site....
I think those plugins are removed from site....
Please help me, if anyone have those plugins...

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

Thanks David. I had to convert the mts file to Quick Time (using AunSoft Conversion software) before I could import it into Final Cut Express. And I made sure I kept the size of movie (720 X 480 with letterbox) to compliment what I set my Panaconic AVCCAM video recorder at (720/60). Even after I fully render it, it still looks fuzzy in the Canvas window at the right that plays what I have editing down in the Timeline. A friend that edits some using Final Cut Pro helped me to narrow things down to this problem. This is also wierd. If my Viewer window at the left is set to 200% to get the person's head the same size in the Canvas window at the right we needed to put it to 400%. Does this make any sense. We think we need to control the Time line resolution somehow but cannot find any options from my manual, or the help, or in the various drop down menus. Do you have any clue? What is going on?

When using TODATE function MDX query is not correctly generated

Essbase 9.3.1.2 and OBIEE 10.1.3.4.1.
When using TODATE function MDX query is not correctly generated.
This leads to unexpected values not only on cumulative columns in report (generated with TODATE), but also other columns (calculated with AGO function or directly read from cube) have incorrect values.
The problem occurs when you filter on a column that is not in the select list. If you filter on just one level of dimension, results are fine. You can filter on multiple dimensions as long as you filter on just one level of each dimension.
If you filter on two or more levels of one dimension, than results are not correct. In some cases results for TODATE column are all zeros, in some cases it is a random value returned by Essbase (same random value for all rows of that column), and in some cases BI Server returns an error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. Essbase Error: Network error [10054]: Cannot Send Data (HY000).
Here is generated MDX code:
With
set [Grupe proizvoda2] as '{[Grupe proizvoda].[N4]}'
set [Grupe proizvoda4] as 'Generate([Grupe proizvoda2], Descendants([Grupe proizvoda].currentmember, [Grupe proizvoda].Generations(4), leaves))'
set [Segmentacija2] as '{[Segmentacija].[RETAIL]}'
set [Segmentacija4] as 'Filter(Generate({[Segmentacija2]}, Descendants([Segmentacija].currentmember, [Segmentacija].Generations(4),SELF), ALL), ([Segmentacija].CurrentMember IS [Segmentacija].[AFFLUENT]))'
set [Vrijeme3] as '{[Vrijeme].[MJESEC_4_2009]}'
member [Segmentacija].[SegmentacijaCustomGroup]as 'Sum([Segmentacija4])', SOLVE_ORDER = AGGREGATION_SOLVEORDER
member [Accounts].[MS1] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],2,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
member [Accounts].[MS2] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],1,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
member [Accounts].[MS3] as 'AGGREGATE({PeriodsToDate([Vrijeme].[Gen2,Vrijeme],[Vrijeme].currentmember)}, [Accounts].[Trosak kapitala])'
select
{ [Accounts].[Trosak kapitala],
[Accounts].[MS1],
[Accounts].[MS2],
[Accounts].[MS3]
} on columns,
NON EMPTY {crossjoin ({[Grupe proizvoda4]},{[Vrijeme3]})} properties ANCESTOR_NAMES, GEN_NUMBER on rows
from [NISE.NISE]
where ([Segmentacija].[SegmentacijaCustomGroup])
If you remove part with TODATE function, the results are fine. If you leave TODATE function, OBIEE returns an error mentioned above. If you manually modify variable SOLVE_ORDER and set value to, for example, 100 instead of AGGREGATION_SOLVEORDER, results are OK.
In all cases when this variable was modified in generated MDX, and query manually executed on Essabse, results were OK. This variable seems to be the possible problem.

Hi,
Version is
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
Sorry, in my last post i forgot to mention that i already created a function based index but still it is not using because, there is a UNIQUE constraint on that column.
Thanks

I have a football game recorded on a DVD R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit.

I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit. My MacBook operating system is Mac OS X, version 10.5.8. DVD Player is App version 5.0.3, framework version 5.0.7.
However, the DVD+R works on both my Dad's and my brother's laptops. My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9. The DVD Player is version 4.0. My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2. The DVD Player is App version 5500.26.1 and framework version 5.5.0. The DVD+R plays fine on their laptops, but will not play on mine.
Anthony

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it freezes the browser. I have to constantly go to Safari Preferences to remove them and then the browser will start working again. What can I do to stop this?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

When using Quite Imposing Plus the resulting file is only given a Temp name which will be sent as the document name.

Our company has recently upgraded form Acrobat Professional 8 to Acrobat professional XI. We also use the Quite Imposing Plus plug-in in both versions. Now when using Quite Imposing Plus the resulting file is only given a Temp name which will be sent as the document name to the printer unless the imposed document is first saved. This was not the case in Acrobat Professional 8. I have attached a screen shots that shows an example.
Is there any reason why this is happening and how can we stop it.

Thank you for your advice although I think you may be incorrect as the naming of the documents made with Quite Imposing is correct in Acrobat 8.
After reading the comment below it would seem something has changed from version nine onwards.
Going forward we plan on changing the way we save and send our imposed documents to print but thank you for your time.

How to use contains() function in bpel?

Hi
Am facing a problem in using contains() function in a switch case... my condition inside a switch case is contains(bpws:getVariableData('singleSIS'),bpws:getVariableData('singleSIS_check')) where the variable 'singleSIS' has a value 'ABCDE' and 'singleSIS_check' has a value 'ABCDE' ... Ideally this condition should return true,but its not happening..Can someone tell me what is the issue with this ?
P.S both the variables are of string type. Please help me with this..

Sure:
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="BPELProcess1"
targetNamespace="http://xmlns.oracle.com/SodaDev_jws/Project4/BPELProcess1"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:client="http://xmlns.oracle.com/SodaDev_jws/Project4/BPELProcess1"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
xmlns:bpel2="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:med="http://schemas.oracle.com/mediator/xpath"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:bpmn="http://schemas.oracle.com/bpm/xpath"
xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap">

<partnerLinks>

<partnerLink name="bpelprocess1_client" partnerLinkType="client:BPELProcess1" myRole="BPELProcess1Provider" partnerRole="BPELProcess1Requester"/>
</partnerLinks>

<variables>

<variable name="inputVariable" messageType="client:BPELProcess1RequestMessage"/>

<variable name="outputVariable" messageType="client:BPELProcess1ResponseMessage"/>
</variables>

<sequence name="main">

<receive name="receiveInput" partnerLink="bpelprocess1_client" portType="client:BPELProcess1" operation="process" variable="inputVariable" createInstance="yes"/>

<switch name="Switch_1">
<case condition="contains(bpws:getVariableData('inputVariable','payload','/client:process/client:input'), 'ABCDE' )">
<empty name="Empty_1"/>
</case>
<otherwise>
<sequence>
<empty name="Empty_2"/>
<empty name="Empty_3"/>
</sequence>
</otherwise>
</switch>
<invoke name="callbackClient" partnerLink="bpelprocess1_client" portType="client:BPELProcess1Callback" operation="processResponse" inputVariable="outputVariable"/>
</sequence>
</process>

Light Table question - Lock this Browser to the Viewer?

What does the button that says "Lock this Browser to the Viewer" do?

You can open multiple Albums or Projects at once using Shift-click or Alt-click. If you do this without locking the Viewer pane to a particular Browser pane then the Viewer will automatically swap to whichever tabbed Project or Album you select.
Ian

10.9.4: Graphical errors when using OSX functions like Mission Control, Spotlight

Device: MBP 15" Retina 2.3 GHz Intel i7
OSX: 10.9.4
Monitor: 27" Thunderbolt Display
Issue: When using OSX functions like Mission Control (Expose) and spotlight, I frequently get graphical errors that remain on the desktop unless I reset the computer. I can resolve the issue by adding a new desktop and dragging my windows over.
This happens almost every day.

You have installed all these non-Apple system modifications:
Kernel Extensions: ?
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.promise.driver.stex (5.2.7 - SDK 10.9) Support
[not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
[not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
[not loaded] com.wacom.kext.pentablet (5.2.6) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.8 - SDK 10.9) Support
Litlle snitch has been a bad actor for some users.
You do not have any CUDA Hardware, so the CUDA Driver is not needed.
I do not know what siLabs driver thinks it may be driving.
You left the door open:
Gatekeeper: ?
Anywhere

Anyone know why, firefox does not remember password for a site when you remove password from the view password site? I removed a pasword in the view password window and now it not asking me to remember and also it is not remembering the password when I go

Anyone know why, firefox does not remember password for a site when you remove password from the view password site? I removed a password for a site that was not remembering the correct password for the "view password" window and now it does not guess the password and does not remember the password for that site. All other sites are being remembered.
== This happened ==
Every time Firefox opened
== After I deleted the password from the view password window.

The saved password feature worked well, but the site I had saved the password for required that I change the password. I have found no way to update the password in Firefox. After I deleted the saved password, Firefox did not ask if I wanted the new password saved. When this happened before, I removed and re-installed Firefox, and then it worked. I hope there is another way to update a password.

INDEX on VIEW or TABLE when using CONTAINS function on the VIEW

Similar Messages

Maybe you are looking for