Index out of range when trying to create a new dimension (reporting type)

I just created all my dimensions/characteristics, created 2 cubes/infocubes (rate & ownership) in my new appset called 'CONSOLIDATION' and I can't seem to create a 'reporting type cube'.
When I try to create a cube called TEST or CONSO... (generic, finance or conso) it says 'index as out of range. Must be non negative & less than the size of the collection. Parameter name : index'. The message pops up immediately, before I can even try to choose dimensions.
Anybody who has a clue, I look forward to suggestions.
Regards
Nico

Hi Sorin,
Thanks for the reply. If I understand correctly, then in my application set, I cannot create any non-reporting type application? As we have deleted the 'Rate' application which was delivered along with APSHELL. Is there any way out to overcome this as from your reply, it seems not possible as the system needs a reference application belonging to the same application type.
Many Thanks for your reply.
Santosh

Similar Messages

Index out of range when trying to create a new Application

When I try to create an Application (Such as Consolidation,Ownership,Rate ) getting an Error Message 'Index as out of range. Must be non negative & less than the size of the collection. Parameter name : index'.
But i could able to create generic application with no issue.
Any leads would be appreciated .
Best Regards
Ram

Hi,
Could you please check if an application has 'Journal' in use in your application set.
If so, it might be the cause of the issue.
This was reported some time ago. You can get rid of that by performing those steps. Before that, be sure to have a copy of all those below tables before doing any change (in order to be sure not to loose anything):
1. In tblapp, anything that has a '1' for Journal has to be changed to '0'
2. Deletion of all tables beginning with JRN.
3. Then, try to recreate your application, add needed dimension and do not forget to check both options (Re-assign SQL index and Process application).
Hope this will help.
Best Regards,
Patrick

Error when trying to create a new Voyager Workspace through Infoview

Hi,
When trying to create a new Voyager Workspace through Infoview, I get the following Error
"An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
I clicked on New Voyager Workspace & then it displays the list of connections available. When, I click on any connection , then I receive thefollowing error
"An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
An Insight of our environment regarding this, we have an clustered environment with Voyager Installed. Platform is Windows Server 2003. We have all the required Microsoft client tools installed on the Production Servers.
This was working fine earlier. We were able to create Voyager WorkSpace at one instance of time. The problem at that point of time was the MDAS Server was not showing up in CMC, i.e as we had clustered environment, only one of the MDAS Server was showing up in the CMC. it was missing the other MDAS Server. but, at that time we were able to create Voyager Workspace.
So, in order to view the other MDAS Server in CMC, we had changed the name of the Server in CCM for both the MDAS Servers.
In detail, Server A.MDAS Server & Server B.MDAS Server- they both were not showing up in CMC. only one of them was showing up in Servers list in CMC.
So, in CCM we had changed the name of Server1.MDAS server to be Server1 &
for Server2.MDAS Server to be Server1 as well.
AFter this both the MDAS Servers were showing uo in CMC.
but, when I login into Infoview & click on new Voyagerworkspace & select a connection, I recieve the follwoing error
"An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
Request to let me know the possible steps in resolving this ASAP

Hi,
Try to create the objects again and take the screenshot of SU53 when you get the error and see the authorization object for which you are getting the error here.
It is possible that you dont have development authorization.
Also the issue could be that the system is not configured to create the objects begining with Z.
Check this with basis as well.
Thanks
Ajeet

Error "The formula cannot refer to another column..." when trying to create a new subsite

Hi All,
I've been running into this error message when trying to create a new subsite
Sorry, something went wrong
The formula cannot refer to another column. Check the formula for spelling mistakes or update the formula to reference only this column.
Note everything was working fine before, this just started happening recently...
At first I thought it was because of my template, but as I have tried, I can't even create subsite using the templates provided by Sharepoint...
has anybody encountered similar problems recently?
Any help is apprieciated!
Fan Yang

Hi Fan,
If you create asubsite using the SharePoint default template, what error did you meet? Was it same with the error?
Which site template did you use for the parent site?
Please check whether you can create subsite at other site collection.
In addition, please trace the exact error by using Correlation ID.
Here are two great blogs for you to take a look at:
http://www.habaneroconsulting.com/insights/An-Even-Better-Way-to-Get-the-Real-SharePoint-Error#.UwrFamiwrwo
http://blog.credera.com/technology-insights/microsoft-solutions/troubleshooting-sharepoint-errors/
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Getting error: RC-50004 String index out of range when running adclonectx.pl

Hi,
I'm trying to clone a RAC database on the same host. I'm using the MOS note:
Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone ( Doc ID 559518.1 )
I run the command from Step 5.1.3:
perl adclonectx.pl ......
But getting error:
"RC-50004: Error occurred in CloneContext:
String index out of range: 38
ERROR: context creation not completed successfully."
From the Clone Context logfile:
PROMPT :
Number of DATA_TOP's on the Target System [3]
ANSWER :
1
PROMPT :
Target System DATA_TOP Directory 1
ANSWER :
+DATA/prod/datafile
ASM Path, not Validating: +DATA/prod/datafile
Creating ../data/stage/addbhomtgt.xml which will contain Target system database mount points.
StackTrace:
java.lang.StringIndexOutOfBoundsException: String index out of range: 38
         at java.lang.String.substring(String.java:1765)
         at oracle.apps.ad.context.CloneContext.gen_iFile(CloneContext.java:6681)
         at oracle.apps.ad.context.CloneContext.getInputFromUsers(CloneContext.java:1114)
         at oracle.apps.ad.context.CloneContext.doClone(CloneContext.java:601)
         at oracle.apps.ad.context.CloneContext.main(CloneContext.java:5260)
RC-50004: Error occurred in CloneContext:
String index out of range: 38
Context file creation not succesful
And workaround/solution will be much appreciated. Thanks very much.

FYI, I'm cloning on the same host as target. This is 2 node EBS RAC setup.
PATH is OLD source for contextfile.xml
Latest clone patches applied.
Here is the complete output from the log file...
[oracle@PPDBS11 bin]$ cat /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/bin/CloneContext_0908210110.log
Using admin directory: /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/bin
#------Log File time stamp: 0908210110------------
# $Header: CloneContext.java 120.92.12010000.26 2013/05/06 12:02:01 mmanku ship $
# Running on          - ppdbs11
# Source Host         - null
# Domain Name         - <xxxx.yyyy.zz>
# Context Location    - /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/PREPROD1_ppdbs11.xml
# Context Type        - null
# Context Template    - /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/template/adxdbctx.tmp
# Clone Stage Area    - null
# Pairs File          - /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/pairsfile.txt
# Destination Context - null
# Validation          - false
# Platform Migration - false
# no prompt           - false
Variables extracted from pairsfile: /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/pairsfile.txt
****************************************************/n
   s_undo_tablespace = APPS_UNDOTS1
   s_dbClusterInst = 2
   s_db_oh = /u01/app/oracle/product/11.2.0/dbhome_1
**************************************************** PROMPT :
Target System Hostname (virtual or normal) [ppdbs11]
ANSWER :
ppdbs11 PROMPT :
It is recommended that your inputs are validated by the program.
However you might choose not to validate them under following circumstances:           -If cloning a context on source system for a remote system.
         -If cloning a context on a machine where the ports are taken and
          you do not want to shutdown the services at this point.
         -If cloning a context but the database it needs to connect is not available. Do you want the inputs to be validated (y/n) [n] ?
ANSWER :
n PROMPT :
Target Instance is RAC (y/n) [y]
ANSWER :
y PROMPT :
Target System Database Name
ANSWER :
PROD PROMPT :
     Host name [ppdbs11]
ANSWER :
ppdbfmisscan PROMPT :
     Virtual Host name [null]
ANSWER :
ppdbs11-vip PROMPT :
     Instance number [1]
ANSWER :
1 PROMPT :
     Private interconnect name [ppdbs11]
ANSWER :
ppdbs11-priv PROMPT :
Target System Base Directory
ANSWER :
/u01/app/oracle PROMPT :
Oracle OS User [oracle]
ANSWER :
oracle PROMPT :
Oracle OS Group [oinstall]
ANSWER :
oinstall PROMPT :
Target System utl_file_dir Directory List
ANSWER :
/usr/tmp/PROD PROMPT :
Number of DATA_TOP's on the Target System [3]
ANSWER :
1 PROMPT :
Target System DATA_TOP Directory 1
ANSWER :
+DATA/prod/datafile
ASM Path, not Validating: +DATA/prod/datafile
Creating ../data/stage/addbhomtgt.xml which will contain Target system database mount points.
StackTrace:
java.lang.StringIndexOutOfBoundsException: String index out of range: 38
         at java.lang.String.substring(String.java:1765)
         at oracle.apps.ad.context.CloneContext.gen_iFile(CloneContext.java:6687)
         at oracle.apps.ad.context.CloneContext.getInputFromUsers(CloneContext.java:1120)
         at oracle.apps.ad.context.CloneContext.doClone(CloneContext.java:601)
         at oracle.apps.ad.context.CloneContext.main(CloneContext.java:5266) RC-50004: Error occurred in CloneContext:
String index out of range: 38
Context file creation not succesful

AIS freezes when trying to create a new metadata catalog

Hi,
I'm really new in EIS/AIS. We are using EIS and Essbase version 9.3.1. I just created a new odbc connection to our data warehouse (Oracle in OraHome92). I tried to create a new catalog but EIS freezes. When I tried to "end task" the console, it closes and would get a message "olapbldr error". Need to know how to fix this. Any help would be greatly appreciated.

Hi,
I'm really new in EIS/AIS. We are using EIS and Essbase version 9.3.1. I just created a new odbc connection to our data warehouse (Oracle in OraHome92). I tried to create a new catalog but EIS freezes. When I tried to "end task" the console, it closes and would get a message "olapbldr error". Need to know how to fix this. Any help would be greatly appreciated.

New Portal User options are disabled when trying to create a new User

Hi All,
I am trying to create a new portal user profile using the administrator login. While doing that, I am getting all the options ( used to create the new user ) as disabled. Can anybody let me know the reason & solution of such a problem.
or
Anyone can provide me the document on how to create the new profile on portal. Thanks.
Best Regards,
Chander Kararia
Edited by: Chander Kararia on Jan 15, 2009 7:26 AM

Hi Chander,
I just want to know if you are able to modify the attributes of an existing user. If not then you have been assigned the User Admin role (read only). Please check that. If yes then revert.
Regards.
Rajat

Missing Number range when trying to create inventory sampling

Hi,
I tried to create an inventory sampling (Transaction MIS1). I selected a Inv.sampling profile and wanted to save the setting. However I get an error message saying:
For object MATBELEG , number range interval does not exist OMBT
Looking at that TCode OMBT i do have set number ranges correctly.
Since there is space between the MATBELEG and teh comma I believe that at some place a MATBELEG is set to blank, where it cannot find any corresponding numberrange.
How can I resolve teh problem??
Thanks fpor your help
Torsten

number ranges are stored in table NRIV object MATBELEG
Number ranges can be transported (but only with big care). it can be done from OMBT menu Interval > transport.
you will get a warning (which should better be an error) because you transport not only the interval, you transport as well the current number and that will screw up your production system.
better have your basis team open production for a short time frame for customizing ( can be done in SCC4 ) and do it directly in PRD.

Error when trying to create a new movie in iMovie

I am currently using a late 2013 MacBook Pro with Retina Display, 2.4 GHz Intel Core i5 processor, 4 GB 1600 Mhz DDr3 Memory, and 121 GB Flash Storage, running OS X Yosemite 10.10.2.
I am having issues creating a new movie in my iMovie application (Versions 10.0.7). After selecting my theme and choosing a name for my new project I receive the following error message.
I have tried deleting and reinstalling the application, resetting the application preferences, deleting the application preferences and repairing the permissions. Nothing has worked. Thank you for your assistance.

Hi,
Try to create the objects again and take the screenshot of SU53 when you get the error and see the authorization object for which you are getting the error here.
It is possible that you dont have development authorization.
Also the issue could be that the system is not configured to create the objects begining with Z.
Check this with basis as well.
Thanks
Ajeet

„The system cannot find the file specified. (Exception from HRESULT: 0x80070002)" - Error when trying to create an new controlled GPO

Hello,
we were planning to Upgrade from AGPM 4.0 to AGPM 4.0 SP2. The new AGPM should be placed on a new server. Additionally we created a new service account as the password of the old service account has been lost. We granted the new service account Full Rights
in "Domain Delegeation" and "Product Delegation", then stopped the AGPM Service on the old server.
On the new server AGPM was installed using the new service account, then the service was stopped and the archive was copied rom the old to the new server. The customer could edit policies, but not deploy them. Because of this, we changed back to the old
server, but copied the folders that were changed on the new server to keep them up to date.
Now creating a controlled Group Policy from a template causes the error
„The system cannot find the file specified. (Exception from HRESULT: 0x80070002). We tried several templates and even created new ones but the problem persists.
The following things do work:
- editing a controlled policy
- renaming a controlled policy
- check in/check out of a policy
- set a uncontrolled policy to controlled (needs to grant the serviceaccount Full rights to the policy before)
- deletion of a controlled policy
- creating a template from a policy
Thank you in advance for your help.

0x80070002 usually means that the source could not be found or located. Make sue that the FQDN path to your templates is the correct one as well as your DNS is
properly configured.
sharing some manuals @: http://1drv.ms/1kk6u6j

CS5 Bridge crashes when trying to create a new subdirectory

Bridge version 4.*.*, Windows 8.
Was working perfectly for months then tonight decided to crash when I try to create a new subdirectory.
When I try to create the subdirectory it closes and I get a window telling me Windows is trying to find a solution.
What is the issue have how do I get a remedy.
I thought OK, the application got corrupted, so I will download and install a new version of bridge.
That seems to not be possible as there is no Bridge for CS5 download on the download menu.
What is the solution? Thanks.

Bridge version 4.*.*, Windows 8.
Was working perfectly for months then tonight decided to crash when I try to create a new subdirectory.
When I try to create the subdirectory it closes and I get a window telling me Windows is trying to find a solution.
What is the issue have how do I get a remedy.
I thought OK, the application got corrupted, so I will download and install a new version of bridge.
That seems to not be possible as there is no Bridge for CS5 download on the download menu.
What is the solution? Thanks.

"Unsorted bookmarks" got renamed when trying to create a new folder?

I added a new bookmark by clicking the little star in the adress bar, then clicked it again to edit the bookmark. I wanted to move it out of the "Unsorted bookmarks" folder into a new folder named "Minecraft stuff", so i clicked "Bookmark menu" and then clicked "New folder".
It created a new folder for me to rename, so I named it "Minecraft stuff", but then when i clicked elsewhere, the folder disappeared. And then I noticed that "Unsorted bookmarks had been renamed into "Minecraft stuff" :/
I cannot find anywhere how to undo this.
When i go into the bookmark library, it is still called minecraft stuff, but down below in the little box it says "Name: Unsorted bookmarks". Really weird...

#Click the Firefox button, go to Bookmarks, Show All Bookmarks.<br><br>
#Go to the Unsorted folder, click the bookmark to highlight it, then click ''Organize ''(top left), then Move.
If you just want to rename the folder, hit CTRL+I to open the sidebar, right click the folder, go to Properties and then rename it in the dialog box which appears.

Query Panel won't open when trying to create a new report

When I am attempting to create a new report in Desktop Intelligence 11.5.0.0, and choose my universe, my query panel does not open - it appears to be "hidden" somewhere in the background because I cannot click on anything else in DeskI until I hit . I have tried rebooting and closing and restarting Desktop Intelligence but it doesn't work..Even when I try and view it from an existing report it doesn't work either.

Hi Alicia,
Following solution might help you to resolve the issue.
To resolve the behavior
1.Click Start > Run. The Run dialog box appears.
2.Type "regedit" in the Open field. Click OK. The Registry Editor dialog box appears.
3.Navigate to HKEY_CURRENT_USER\Software\Business Objects\Suite 6.0\default\BusinessObjects\<username>User Prefs\Query Panel.
4.Right-click Query Panel > click Delete.
The folder will be recreated the next time the application is opened.
5.Close the Registry Editor.
6.Restart the computer.
The Query Panel will now be available for creating new queries and editing existing queries
Regards,
Sarbhjeet Kaur

Error when trying to create a new object that begins with Z

Hi forum,
When I try to create a new BW object that begins with Z (infofuente, infoarea, component application), I skip the following error.
Namespace''is not a valid namespace BI
Message no. R7017
Diagnosis
Namespace''must be entered in both the BI RSNSPACE table and the basic table TRSNSPACE or the view V_TRNSPACE. You also have to enter the relevant generation namespace '& V2' in TRNSPACE table. This value is taken from table RSNSPACE.
Both namespaces must be set to 'Changeable' - providing they are not empty.
Response System
You can not edit or create an object in this namespace.
Procedure
Use a different name.
Or contacct your system administrator. He / she can switch to the namespaces' Changeable 'using SE06 transaction, or - if they do not already exist - enter them in the table above named using sm30 transaction.
If the namespace '& V1' is empty, then the problem is with the generation namespace '/ BIC /'.
Procedure for System Administration
I've been following steps said to me, and yet I still persisted error. I am probably missing something ... that may be?
A greeting,

Hi,
Try to create the objects again and take the screenshot of SU53 when you get the error and see the authorization object for which you are getting the error here.
It is possible that you dont have development authorization.
Also the issue could be that the system is not configured to create the objects begining with Z.
Check this with basis as well.
Thanks
Ajeet

Error when trying to create a 'New Chat'

Using 10.3.9, whenever I try and create a new chat to speak with multiple friends, i get this error:
NSImageCacheException:
Can't cache image
It does not crash the application, but I cannot add anybody to the chat. It completely locks up that particular 'new chat' but my other chats continue to work with no problems. Any suggestions?
eMac G4 Mac OS X (10.3.9)

Hi Beau,
I take it this is when you are starting a group Text chat as opposed to a 1-1 Text chat.
A "plain" Text chat can manage on the login port of 5190 on the TCP protocol to pass the data through a modem or router's firewall.
A Group Chat (or Direct chat and file sending) need to have this port open to the UDP protocol.
Do you know if this is a port and protocol that is open or are you using UPnP in your device(s) ?
8:11 PM Friday; December 15, 2006

Index out of range when trying to create a new dimension (reporting type)

Similar Messages

Maybe you are looking for