Index period separators are formatted differently than rest of entry

Has anyone else experienced periods or other index separators that are not formatted according to the index level style that is applied to the entry? Even though the index paragraph style is regular typeface with no baseline shift, ID insists on formatting my "See also" period separators as bold, with a -1 pt. baseline shift. Weird. Any help would be appreciated, as it does make those entries look odd.

Thanks for the tip, Fred. I checked and there WAS a character style applied, just to the Before Cross Reference separator. ID is applying my Page Number style, even though it was not specified anywhere in the Level styles or Index styles.
I'm not sure how to fix that, so I may just change the page number style so that it's not bold and doesn't have the baseline shift, and format my page numbers with a different style. More than one way to skin a cat...

Similar Messages

Is Labview Bitmap format different than Windows?

I have an issue with my bitmap images (depth bit of 1) saved with LabView and a brady printer I'm sending them too with a Serial VISA.
I have a VI to create a barcode image and save it as a bitmap. I'm just using the simple graphics Write BMP File VI after a Picture to Pixmap VI. The file looks just fine if opened in MS Paint. Yet when I send it to the printer as a file, it's all garbage.
If I use the same VI to save the bitmap (depth bit of 4) then open it with MS Paint, then save it as depth bit of 1. I use the same print VI as before, the file prints beautifully.
If I open the bitmap created by my VI (depth bit 1) and the equal on saved by MS Paint in Notepad I see they are not the same.
Admittedly I don't know a lot about file structure so probably don't know that I'm doing but any friendly advice would be appreciated. I'll attach the files with a .txt extension so that I can post them.
Attachments:
LabView and Paint Bitmaps.zip ‏1 KB

I see a couple differences in the files.
The LV bitmap is almost twice as large as the MS Paint bitmap. Opening them up in Notepad, the crazy characters look different. The LV bitmap has a long line of spaces at the end of the file, probably why the file is longer.
I opened both images in LV using the Read Bitmap File and looked at the image cluster. Both have the same number of pixels (1872) and both have 2 image colors and an image depth of 1. However for the colors, LV has color 0 as 1677721 and color 1 as 0. MS paint bitmap is the reverse. LV pixel 0 is 0 and MS Paint pixel 0 is 255. (Possibly explained by the different order in the colors?)
The 2 images look a lot alike in a LabVIEW picture control and in Paint, but the MS paint bitmap has more black pixels making up the characters as compared to the LV bitmap.
Why the 2 files are inherently different, I don't know. But perhaps those differences explain why the printer is treating them differently.

Page Format different than doc

I have converted a pdf file to a word doc so I can insert into my document but the margins are different and the form is being cut off when I insert. I cannot change the margins on my document do to the large content. How can I get it to fit?

Hello Peter,
All our projects reside on a shared network drive. We both
have access to them. When I say "my PC" or "my partner's PC", I
mean that the project is open on my or my partner's PC. But it is
the same project, not a copy of the project.
We tried your suggestion, and both projects generated letter
size documents on my side, and A4 documents on her side.
Since my original post, we have reinstalled RH as suggested
on a different message board. This did not solve this problem. We
have checked and installed update files from the Adobe site - no
change. We've even had our techies poke around, but they couldn't
come up with anything.
Our only working solution so far is to generate the Word
document and change the page format manually. Which doesn't sound
too bad, except that 2 of our projects each require 17 different
pdf files - so it makes for a lot of manual attention as opposed to
a simple "Batch Generate".
As I wrote in my first post, I'm not sure if this is a RH
issue, so I really appreciate any help you can provide.
Thanks
Ben

Colors are previewing differently than design mode

Anyone run into this problem before.... I've got a picture that looks way darker/desaturated in design mode than it does in preview mode. It doesn't happen with all pics, but it's a little irritating.
See pics (the second one - Preview mode - is correct):

Yes same issue. On the left is design mode. On the right is the preview in the browser. The preview in the browser is correct. This site was built in the previous version of Muse.
Something needs to be done about this quickly or I see no point in using this software. It is visually inaccurate.

Acrobat 9-forms-Radio buttons print different than check boxes

I am using Acrobat Pro 9 to create forms.
I've used both radio buttons and check boxes (that are circles).
Forms were designed in InDesign with Zapf Dingbats as the open circles to be filled in.
I used radio buttons when the user had to pick one over the other.
I used check boxes when there were multiple choices or I wanted the user to be able to uncheck a box. (I used the circle style so they would look like radio buttons).
The radio buttons are printing differently than the check boxes. It looks almost like there is an overlay on top of the actual open circle created by Zapf Dingbats.
I checked the "appearance" window and there is no border or fill color on the radio buttons (same for the check boxes).
Under the <general> tab, <common properties> is visible. I'm assuming it should be in order for the radio button to appear on the form.
I would appreciate any input as to how to fix this.
Thansk!
Maureen

That's just the way radio buttons are, and one reason I rarely use them in preference to check boxes. If Adobe wanted to, they could allow you to use any appearance you want for both the selected an unselected state of a check box or radio button, but they've actually further restricted your options over the years.

Z77A-G45 Live Update drivers different than websites (Also Intel has their own)

(MS-7752) Z77A-G45
Win7 64
Why are there different drivers listed in Live Update 5 than what is listed on the website? This is especially confusing with Management Engine driver because there are two separate drivers dated 2013-10-16 on the website in addition to Intel and Live Update having their own different driver.
Some examples:
MSI website:
Intel Management Engine Driver 9.5.15.1730
Intel Management Engine Driver 8.1.30.1349
Realtek High Definition Audio Driver 6.0.1.7037
Intel Smart Connect Technology Driver 4.2.40.2418
Live Update 5:
Intel Management Engine Driver 9.0.0.1310
Realtek High Definition Audio Driver 6.0.1.6959
Intel Smart Connect Technology 3.0.42.1767
Should I just go 100% by the website (although Intel's are also different than MSI's site..)?
Also, I'm currently on BIOS 2.9. Should I update to 2.C0? Is that one stable for overclocking?

Quote from: Nichrome on 07-December-13, 19:42:57
I suggest you uninstall Live Update ( I did so) because it f...k my drivers one day, and had to do fresh Win7 installation and even BIOS update which I didn't need before ..
That sucks.
I've never actually installed anything with it. I was just curious to see which files it'd attempt to update. I'll definitely uninstall it now though..

Why are 2 different date formats being used in thunderbird?

Hello
in the attachment you will see that the listing of emails (on the left) is shown using UK date format DD/MM/YY (that's what I want), however, the message content panel shows the date in the US format MM/DD/YY (I definitely do not want this).
Why are 2 different formats being applied in Thunderbird, and how can I get both to be UK DD/MM/YY please.
Many thanks
Lord Elpus

I should have said :
this is Thunderbird 31.6.0 on Ubuntu 14.04 LTS
Image resent due to previous failure.

I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I a

I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I adjust it to look normal?

Hi Paul ,
It could be a compatibility issue as well as Acrobat 8 is an older version.
Do you get any error message while registering for the product?
Try repairing it and once and also check for updates as well.
Is it happening with all the word files or any specific one'?
Regards
Sukrit Dhingra
Acrobat 8 and Windows 7 Don't Work

TS1702 Why are my pics in iPhoto on my iPad different than the pics in the same album in iPhoto on my iMac?

Why are my album pics in iPhoto on my iPad different than the pics in the same album on my iMac?

Configuration.

FCP7 HELP - Exported quicktime mov plays differently than what I edited on the timeline. The playback shows the clips with ins and outs that are different than what I set in the clips when I edited - some are too early and the clips don't playback

Please help ASAP.
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
Thanks,
MV

What is your source material? Is it H.264? FCP does not work correctly with that material.
Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
MtD

Why are images displayed in Photoshop different than the same images displayed in Indesign?

My images imported to Indesign do NOT display as the images in Photoshop.
They seem to display under different color profiles.
The images in Indesign are more desaturated than the images in Photoshop.
This is a problem because now I don't know which image appearance to trust!
How can you get the Indesign images to look like the images in Photoshop?
I use Photoshop CS4 and Indesign CS3.
I import the images from Photoshop to Indesign for exporting to a PDF as the base for Blurb printing (www.blurb.com).
I use the CMYK profile Blurb_ICC_profile.icc:
The images in PS4 are converted to Blurb_ICC_Profile (CMYK).
Both in PS4 and ID3 the color settings are
                           Working spaces:
                              CMYK: Blurb_ICC_profile
                           Color management Policies:
                               CMYK: Preserve Embedded Profiles.
The images are imported into Indesign by drag and drop from Bridge CS4. In Bridge it says that the images have color profile CMYK, Blurb_ICC_profile.
I also do get "Unsynchronized: Your Creative Suite Applications are not synchronized for consistent color." And I don't seem to be able synchronize between CS3 and CS4, or whatever. I do NOT depend on any synchronization.
The settings above should be enough to show the images consistently in Photoshop and Indesign.
SO WHY DOES IT NOT?
Should not Adobes own applications be able to keep color consistency?

Hi WA Veghe,
>First: DO synchronize, makes sure you have the same profile settings and color mange settings.
I don't seem to be able to synchronize between CS4 (Photoshop) and CS3 (Indesign).
It seems I have to do without synchronizing..
>I do not seem to find HOW you are diplaying images on you screen: with Soft proofing?
What happens if you soft proof in Photoshop and InDesign on screen: View > Proof colors. Do you proof with the same profiles, both simulate paper and black on?
I can simulate Proof Colors (working CMYK), but not simulate Paper, both in Indesign and Photoshop.
Problem is: SAME settings in Photoshop and Indesign BUT the image displayed in Photoshop is brighter and more saturated.
So which image should I correct after?
thanks for all help
/L

Table Values in Preview Mode are Different Than in Development Mode

Any idea why the values in a table row would be different in Preview mode than in development mode? They are only different in 1 row. The values in this row refer to values in another part of the spreadsheet that are generated by formulas. They apprear fine in Xcelsius but change in the SWF.

Hi Tony,
Thank you for sending the files to me. Our QA testers noted that one problem with the spreadsheets is that the Chart is linked to cells in your spreadsheet that are protected. This will prohibit the Chart from accessing the data in those cells. Can you send me the files again, but with all cells unprotected?

Security questions are different than questions I originally answered can't access iTunes for new ipad

Need to answer security questions to access new iPad, security questions are different than what I originally answered.

Doubtful.

I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile

Hi Shawn,
It sounds like the person who installed the hardware didn't install the software properly for you. You should reinstall this to get full functionality and control yourself.
The process is easy:
) With the computer on, close all programs that are running and put the Creative CD-ROM into your computer's CD or DVD dri've. There are probably several disks; the one that you want should say 'Intallation and Applications CD' on the label.
2) The Setup program should start automatically in a few moments, but if nothing happens, click your Start menu and choose Run..., then click the Browse button. From the 'Look In' drop-down menu, choose your CD/DVD dri've. In the list of files that appears, choose the one called Setup or Setup.exe.
3) The Setup program will let you choose what to install. Choose to install everything. There might be two separate Setup processes that start after this: one for the soundcard's drivers, and one for the Creative MediaSource software. Within each process, when you are given the choice of Full, Custom, or Basic, select Full in each case. Follow the instructions in the programs and they will guide you through the setup process.
IMPORTANT: you will likely be given the option to use digital output only to your speakers. Only select this if you have digital speakers, attached to the sondcard through only one digital cable. If your speakers are attached using several cables, you should use analog output.
4) Once all of the Setup programs are completed, they will probably have you restart your computer.
All of the above should have been done when the card was first installed, but it seems that whoever you paid to do the installation didn't bother with the software install.
After this is all done, you should be able to use all of your speakers. If you are still having trouble, you will be able to follow the instructions that you were given before on how to enable CMSS.
Good luck!
Neeraj Mathur

My email (sign-in) and password for iTunes is different than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?

My email (sign-in) and password for iTunes is different than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?

Hey Lakedrive442,
It sounds like you have changed your Apple ID which you use with iTunes. If so there are several places you may need to update it as outlined in this article.
Apple ID: What to do after you change your Apple ID - Apple Support
Of course some might not apply, but many might.
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

Index period separators are formatted differently than rest of entry

Similar Messages

Maybe you are looking for