Indexes Error n Process chains?

Hi,
I get an error in the "create Index" in Process chain for a cube.
Error says " Creating/Deleting index not allowed for that infocube"
The same Process chain ran fine before..But the problem occured only this time.
Any info on this please..
Thanks,
Sai.

Wat exactly do i have to look in DB02.
I clicked on missing indexes..and it shows as 20 missing secondary indexes on the same infocube..
Is that causing problem..If yes then how do i correct it..
Thanks.

Similar Messages

  • Data load Error using Process chain

    Hi,
    In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
    Thanks.
    Param

    Hi Victor,
    Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
    Communication error: call FM RSSDK_DATA_REMOTE_GET
    Thanks in advance for your help!!
    Sandeep

  • I am getting an error in process chain in bw 3.5?

    Hi all,
    I am getting an error in process chain in bw 3.5?
    @5D@     A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th     @35@
    I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
    Why does further update ods gets selected automatically?
    Thanks
    pooja

    Hi Pooja
    Are you talking about update ods object data?
    Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
    Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
    Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM

  • Error in Process chain( Urgent Please )

    error in Process chains:
    My Process Chain errors out in the step to activate the ODS after loading data inot it.
    The loading is correct and green. The Activation step errors out .
    Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
    I get message like this :
    Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
    Message no. RSMPC129
    Diagnosis
    Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
    System response
    The return structure is corrected and the data package is marked as incorrect.
    Message was edited by:
            Chris Gokul

    Chris,
    Looks like a request has not got deleted properly from the table :
    Options that you could look at :
    1. Delete all the data from the ODS and load again ( if that is an option )
    2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
    Also please mention your BI version and patch level.
    Arun

  • Error in Process Chains

    Hi APO Gurus
    I am getting following error in Process Chain :
    1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
    2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
    3  Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
    Can anyone guide  through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
    Amit

    Hi All,
    Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
    Now I get another error in the Load Data process of the process chain. the errors are as follows:
    1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A)     @35@
    Diagnosis: File  /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
    2. @5C@     Errors in source system     @35@
    3. @5C@     Error 1 when loading external data     @35@
    The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
    ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
    Can anyone explain wht the problem could be?
    THank you

  • Error in process chain pushing step

    Hi Experts,
    We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
    Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
    Best Regards
    Venkat...

    Hi Ram, thank you for the quick response.
    Yes, at source, all requests are available for reporting.
    Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
    PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
    Daily, it's working fine. Unfortunately, today failed
    Any insights please...
    BR
    Venkat...

  • Error in Process Chain for Delta pack

    Hi All,
    Here I am facing error in process chain for delta pack.
    Error:
         Last delta upload not yet completed. Cancel     I     
    Please send me the solution asap.
    Thanks

    Hi,
    This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
    Refer
    Last delta update is not yet completed
    Last delta update not yet completed-PC Chain Error
    Last Delta Not Yet Completed
    This is the same issue as yours.
    Thanks,
    JituK

  • Errors in process chain

    hello gurus,
    what are regular errors in process chain during data loads?

    Hi,
    Mostly we have
    No SID values
    Error in transfer structure
    Error in source system
    Trfc Error
    Time stamp Error
    Error occured due to short dum[p
    Job cancellation in R/3 system
    DSO Activation failed
    caller70 is missing
    Attribute change run failed
    Table space issue
    Regards,
    Marasa.

  • Error in process chain creation :  SET SCREEN not allowed in subscreens

    Hello,
    We are getting an  Error in process chain creation  :  SET SCREEN not allowed in subscreens  SAPRSSM 0100.
    Please give a solution. Thanks in advance.
    RR.

    Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.

  • BW: Not getting Dump For Program error in Process Chain

    I have one issue regarding Master data loading issue in BW(3.5).
    My business flow like we have received data from server A and Server A extract data from Server B and
    Server B which is extract data from source(R/3).
    Flow like this R/3-->Server B-->Server A(ETL) -
    > My Server.
    We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
    Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
    But lastdays process chain paticular process stills remains yellow?
    We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
    Note: it will be helpful for me  if any one know how to check dump for program errors in Process chain as narated issue.

    Guys, I am also facing the same issue.
    When DTP is completed successfully, it has the job log blow :
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
    Job finished
    When it fails or remain yelllow for long time and then turn into red.
    Job started
    Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
    Performing check and potential update for status control table
    Status 'Executable' (user BWREMOTE)
    Status 'Active' (user BWREMOTE)
    EXTRACTION OF DATAPACKAGE 000001
    EXTRACTION OF DATAPACKAGE 000002
    Job finished
    The question is, why the program  RSBATCH_EXECUTE_PROZESS is not scheduled.  Is it because there is no free resource? Or poor response from SAP ECC?
    Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
    Regards
    MultiABAP
    Edited by: MultiABAP on Oct 6, 2010 10:32 AM

  • Error in Process chain while deleting index and create index

    While executing the process chain  for delete index  the process chain failed with the below error message as "The system has not finished loading request 445315 into data target ZECC_C01". While creating index also it failed with error message as "Lock NOT set for: Generate index, RSSM_PROCESS_INDEX terminated, because InfoCube/DSO object ZECC_C01 could not be locked".
    Please help me in solving this issue.
    Thanks & Regards,
    Bharathi

    Hi,
    Manage the data target - ZECC_C01 and check the request number 445315. Also check the subsequent data targets if further loading was erroneous. Check whether the request is green / Properly loaded or not.
    You can also use RSBKREQUEST table to check the request and its corresponding data target.
    This request is either red or yellow caused this failure.
    Hope this helps.
    Regards,

  • Delete Indexes  Variant ended with errors in Process chain

    Hi experts,
    I have a process chain which executes dialy to load data Info Cube we create the index and finally  we delete the index after that we have few variants..
    Remaining all variants are executed with out errors except delete index variant I checked the error message it shows that <b>" The system has not finished loading request APO_R46PWZHRIA7JS9NOM8X879QEZJ into data target ZUP_CARF1"</b>
    It  is so happened weekly twice or trice not every day.  one day it was running with out any errors and one day this process chan was ended with errors.
    I need to know the  reason why this variant was executed with errors.?
    I need your valule sugestions regarding this issue.
    Regards
    sailekha

    hi sailekha,
    therevare some functional constraint of processes.
    while deleting indexes
    it is not possible to:
                                  loading
                                  indexes are being built
                                  stastics are being built
                                  during rollup
                                  while compressing
                                  while updating.
    my be u can check which is the other process chain that does all above oprations in concerned infoprovider.
    bye

  • Index Creation wrong error in process chain

    Hi Experts,
    One of my process chain got failed due to following error:
    "Index creation in Infocube got wrong"
    can anyone help,how to resolve this issue?
    Edited by: Nirav Shah on Dec 21, 2007 7:05 AM

    1)You can even see the INDEX in DB02 t.code
    2)Goto Cube -> Manage -> Performance TAb -> Repair Indices (you can see all the index related statuses hre, like check indexes, repair indexes, you will get the green/red status here if you got green status no worries, if red you can rebuild indexes)
    3) You can read the message from Process logs and you can find out some solve issue from there also
    Edited by: Aduri on Dec 21, 2007 7:10 AM

  • Error "Lock not set for: Generate index" while running process chain

    SAP BI 7.0
    SP 17
    I am attempting to run a new process chain and the generate index steps are failing with the below errors:
    "Lock NOT set forGenerate index"
    "RSSM PROCESS INDEX terminated, because InfoCube/DSO object could not be locked."
    The process chain just pauses. I let it finish once and it took 2 hours and then it gave the failure messages. I have looked in sm12 and can see the lock records when the process chain is running - unfortunately I can't make much of what's there - everything looks good to me. I also tried creating the indexes manually inside the cube and then re-ran, but still get the same error. Before running the process chain, I can get the indexes to check to green, but then after running the process chain they go back to red. I have attempted many things (including looking at other forum posts), but I still have the error. Please help. Thanks
    Edited by: Brett Hutchinson on Feb 10, 2009 7:50 PM

    Hello,
    So Create index is getting failed in you PS right?
    1)check  if any other loads are running to the same CUBE(May be from other PC's also)
    Goto Manage of the cube and check, some times it may happen if any Loads are running into cube I mean Load/DTP & roll up may be running.. if so wait till the others Loads(Jobs) get complete then Repeat the failed index
    2) If the Create index is running for long time, then  got RSDDV--> Select the CUBE then click on BIA index(Maintenance wizard), you can see a message if indexes are running , this will happen  only when some one would have tried to generate the indexes manually and it may got failed due to some reason , since u are running it manually u couldn't identify whether it got failed or not unless you got to RSDDV and check. So delete the index here and then rebuild them through PC
    Hope it helps!

  • Error in Process chain creation

    Hi All,
    My dataflow is:
    R/3---ODS--Cube.
    R/3 to ODS is Daily Load
    ODS to cube is Monthly Load.
    I am planning to create 2 process chains.
    One I did from R/3 to ODS with following Processes.( This Chain Is OK)
    Start----Execute ODS Infopackage--
    ODS Activation.
    Second One with (Error)
    Start-----Further Processing--Delete IndexLoad Data--Create Index.
    When I click on Checking View I am getting Red mark on Load data Process.
    WHen I take Further Process as variant It proposed Activation of DSO process Again, I removed that process.
    Details of the eRROR IS: Infopackage ZPAK_**is generated, Not able to be used as Loading variant.
    Can ANy body help me on this and what could be the best way to create chain for this flow.
    Regards,
    Madhu

    Hi Friend,
    Q. Second One with (Error)
           Start-----Further Processing--Delete IndexLoad Data--Create Index.
    A. The Flow should be :
           Start  - > Delete Index for Cube  - > Load Data (IP to load from ODS to Cube)  - > Create Index for Cube.
    Hope this helps.
    Regards
    Hemant Khemani

Maybe you are looking for