Indexing .cfm files using Indexing Service on windows server 2008 and IIS 7.0

Hi All,
Anyone knows why .cfm files would not get indexed by Indexing Service on windows server 2008 and IIS 7.0.  This is a coldfusion website using Indexing Service for site search.  There are a lot of cfm pages indexed as unknown files.   Any clues on how this can be fixed?
Thanks!

You might try editing your registry so that *.cfm, *.cfc, and other ColdFusion related files are treated as text files by the Windows search feature.  See link below.
http://www.dougknox.com/xp/tips/xp_bad_search.htm
Disclaimer: I am not a Windows system admin.  You might try posting this question to a Windows specific forum.

Similar Messages

  • AD Management Gateway Service for Windows Server 2008 SP2

    Hey,
    I'm having the same issue as in this thread.
    https://social.technet.microsoft.com/forums/windowsserver/en-US/93be1866-8aa8-4004-be95-113b7a4faef2/ad-management-gateway-service-for-windows-server-2008-sp2
    And trying to follow the 5 step procedure listed in the 3rd post, but am stuck on step 5, getting the hotfix from Microsoft. The link posted from the Hotfix page is just a generic Microsoft Support page. Which is not helpful. How do I actually contact them
    (phone # or email address) to get the software?
    Thanks In Advance,

    No luck. I've tried the chat which asks which Windows version Im using and there's no Server 2008 only desktop versions. I called and after talking with 3 people I got cut off. There has to be an easier way to get a simple file downloaded.
    You can hire me to do it for you.  I am always successful at contacting MS Support. 
    You didn't follow the instructions I  posted.
    Reach us over the phone at 1-800-642-7676 (TTY: 1-800-892-5234)
    http://smallbusiness.support.microsoft.com/en-us/contact/
    Click Technical Support for Chat.                     
    GREAT BIG BLUE BUTTON SAYS "Technical Support" - CLICK IT AND SELECT WINDOWS SERVER AT THE BOTTOM OF THE LIST.
    It is really that easy.
    ¯\_(ツ)_/¯

  • Problem starting Repository Browser Service on Windows Server 2008

    Using the default Warehouse Builder installation in the 11g (11.1.0.7.0) databaseinstallation on a clean Windows Server 2008 64-bit installation.
    Warehouse Builder installed and populated ok, OWB client works fine etc.
    When trying to start the Repository Browser listener by running the startOwbbInst.bat, the OC4J container crashes with the following error in the \owb\j2ee\log\oc4j\log.xml:
    +<MSG_TEXT>Could not create Secure http listener due to {0}</MSG_TEXT>+
    +<SUPPL_DETAIL><![CDATA[java.io.FileNotFoundException: C:\Oracle\product\11.1.0\db_1\owb\bin\admin\..\..\j2ee\config\%ORACLE_HOME%\owb\j2ee\config\keystore.jks (The system cannot find the path specified)+
    +     at java.io.FileInputStream.open(Native Method)+
    +     at java.io.FileInputStream.<init>(FileInputStream.java:106)+
    +     at java.io.FileInputStream.<init>(FileInputStream.java:66)+
    +     at oracle.oc4j.security.OC4JSSLSocketFactory.getStoreIn(OC4JSSLSocketFactory.java:253)+
    (The local_service_login.bat works fine).
    We're starting this as an administrator user in Win2008.
    All parameteres in the setowbenv.bat seems to be correct as far as I can tell. There is a strange reference to %ORACLE_HOME% in the above log, of which I've no idea where it is coming from....
    Identical installation worked fine on a 64-bit Windows Server 2003, - so can this be something related to a new security model in Windows Server 2008?
    (I found a posting regarding problems with the startOwbbInst.bat on Vista  [here |http://forums.oracle.com/forums/thread.jspa?messageID=2275781&#2275781] - so maybe.... however, the quickfix mentioned there did'nt help us here...)
    Anyone experienced similar problems (and preferably solved them) on Windows Server 2008 and/or Vista?
    Regards,
    -Haakon-

    Solved this after some trawling through xml configuration files on the server.
    The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
              <ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="-&gt;keystoreadmin"/>
    changing this to:
              <ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="-&gt;keystoreadmin"/>
    and the OC4J container starts successfully.
    Regards,
    -Haakon-

  • Offline data synchronization in azure mobile services on windows server 2008

    Hi,
    I have a class library which insert data into tables in azure mobile services on windows server 2008 OS for windows universal C# platform. I am trying to insert data using offline data synchronization.
    I had installed SQLite runtime for windows 8.1 and windows phone 8.1, but unable to add reference 'SQLite for Windows Runtime(Windows8.1)'.
    Please guide me whether windows server 2008 OS supports offline data synchronization in azure mobile services.
    Thank you.

    I also have a Windows Server 2012 R2 system using Azure Backup, and I don't have the problem. However, you probably noticed that you use a different Azure Backup installation download for Windows Server 2008 R2 vs. Windows Server 2012 R2. Although both
    show the same Microsoft Azure Recovery Services Agent version 2.0.8692.0 installed, my Windows Server 2012 R2 also lists Microsoft Azure Backup for Windows Server Essentials version 6.2.9805.9 installed as well. It could be the case the my problem with the
    CATALOG FAILURE 0x80131500 errors is something specific to the version of Azure Backup installed on my Windows 2008 R2 servers.
    Trilon, Inc.

  • Crystal 8 Web Component Server ond Windows Server 2003 and IIS 6

    I am trying to get Crystal 8 Web Component and Page Server to run on Windows 2003 Server with IIS 6. I have done the following:
    Added the .cri and .rpt ISAPI extension mappings
    Have Cache ISAPI extentions selected
    Deselected "verify that file exists"
    Aded the .cri and .rpt MIME types
    Added wcsinsapi.dll as a IIS 6.0 extension
    The above resolved all HTTP 40x.x errors but when trying to access a report from IE I receive the following error:
    Error: Could not connect to the Web Component Server.
    The page server and web component server services are running and I do see the listen ports (6401, 6403) active.
    I know this is old software but it works quite well under a Windows 2000 Server and other web postings indicate that it is possible to run Crystal 8 under WS2003 and IIS 6.
    Does any one know of a white paper/support document that details how to run Crystal 8 under Windows Server 2003 and IIS 6?
    Has any one done this successfully?
    Any tips as to cause of the "Could Not Connect" problem would be greatly appreciated.

    Well as it turns out it looks like it was just this server.
    We tried everything, and I added those user accounts to full
    permission for the Coldfusion folders and we just could not get it
    to work. We tried it on another couple servers running 2003, and it
    installed perfectly right out of the box with no other permissions
    needed. And those servers were all running default configs with no
    other permissions done.
    We still have no idea what was the problem, but at least for
    now it seems to be this server. But I will tell you what, that II6
    stuff seems to be a bit of a pain, we had major problems installing
    new version of PHP with it too. Oh well, good luck to you
    too!

  • How do you repair ntoskrnl.exe error or system error in windows server 2008 and 2012

                              
    hi,
    can you repair system file errors like  ntoskrnl.exe in windows server 2008 and 2012  like   like before  in windows server 2003 ?
     the steps were  repairing ntoskrnl.exe  error in windows server 2003
    1- have a 2003 cd and from that cd  start recovery console and copy from i386 directory ntldr and ntdetect.com to  windows /system32 directory on the  server and then repairing
    2- MBR with fixmbr command  and then  rebuild BOT.INI file  with bootcfg/rebuild . 
    now my question  is how you repair or solve such problem with ntoskrnl.exe error  in windows server 2008 and windows server 2012
    thanks
    johan
    h.david

    first this wil take a lot of time for windows 2008 and 2012 ,
    and what about windows 2003 I thing this has no startup repair
    thanks
    johan
    h.david
    What will take a lot of time? Repair or clean install? These days one can standup a new VM and have an operating system on it in around 20 minutes or so.
    Correct server 2003 is file based deployment and completely different OS from repair perspective as well.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Windows Server 2008 and SQL Server 2008 R2 - ?? for replication with Oracle

    Hello:
    I am running Windows Server 2008 and SQL Server 2008 R2 - 64 bit
    I need to replicate data between the SQL 2008 and Oracle 11.2 ?? with Oracle being the publisher
    I also would lile SqlPlus installed on the server.
    I need a definite answer as to what I should download from the Oracle download area. There are just so many packages and so many version I dont know what to download.
    Thanks

    Hi,
    Currently Microsoft Windows Server 2008 and SQL Server 2008 are not supported for SAP Business One.
    For detailed information about all supported platforms, we have the following link for your reference:
    www.service.sap.com/smb/sbo >product availability > supported platforms.
    Regarding the information on the service marketplace this is updated on a regular basis and provides the most up to date information regarding the supported platforms for Business One.
    Platforms not mentioned in this documentation are not supported.
    hope it helps,
    Regards,
    Ladislav
    SAP Business One Forum Team

  • When will Oracle 10g/11g support Windows Server 2008 and AIX6.1

    Hi all
    I'm sorry if I post it in a wrong place... But I really want to know when will Oracle 10g/11g support Windows Server 2008 and AIX 6.1?
    I've searched in metalink but found nothing useful. Is there anybody can give me a link of Oracle's roadmap for platform support?
    Thanks!

    Oracle does not announce release dates and neither
    does any other software company.But Oracle does have a very good track record of supporting their products on new windows releases extremely close to the windows release date. Clearly they can't support on an unreleased platform though. Given that the launch of Server 2008 isn't even complete worldwide yet (19th March in the UK for example) it would seem that this enquiry is a little premature.
    Niall Litchfield
    http://www.orawin.info/

  • OS Error in starting the OCFS Service on windows server 2008

    Hi,
    Installing the Oracle 11g R1 CRS on windows server 2008 operating system . It is displaying the folllowing error message
    ERROR : OS in Error in starting the OCFS Service
    Can any one please tell what could be the issue ..
    Thank You

    Solved this after some trawling through xml configuration files on the server.
    The file C:\Oracle\product\11.1.0\db_1\owb\j2ee\config\http-web-site.xml contains the reference to keystore.jks:
              <ssl-config keystore="*%ORACLE_HOME%*/owb/j2ee/config/keystore.jks" keystore-password="-&gt;keystoreadmin"/>
    changing this to:
              <ssl-config keystore="C:\Oracle\product\11.1.0\db_1/owb/j2ee/config/keystore.jks" keystore-password="-&gt;keystoreadmin"/>
    and the OC4J container starts successfully.
    Regards,
    -Haakon-

  • Windows update KB2964444 broke Event Logging Service and SQL Agent Service on Windows Server 2008 R2

    I got the following problem:
    I discovered that on my Windows Server 2008R2 machine the event logging stopped working on 04/May/2014 at 03:15.
    Also, SQL Agent Service won't run
    The only change that day was security
    update KB2964444 - Security
    Update for Internet Explorer 11 for Windows Server 2008 R2for x64-based Systems, that was installed exactly 04/May/2014 at 03:00. Apparently, that's what broke my machine...
    When I try to start Windows Event Log via net
    start eventlog or via Services
    panel, I get an error:
    C:\Users\Administrator>net start eventlog
    The Windows Event Log service is starting.
    The Windows Event Log service could not be started.
    A system error has occurred.
    System error 2 has occurred.
    The system cannot find the file specified.
    I tried:
    restarted the OS (virtual on the host's VMWare).
    re-checked the settings in services menu -they are like in the link.
    checked the identity in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\eventlog -
    the identity is NT
    AUTHORITY\LocalService
    gave all Authenticated Users full access to C:\Windows\System32\winevt\Logs
    ran fc /scannow - Windows Resource Protection did not find any integrity violations.
    went to the file %windir%\logs\cbs\cbs.log -
    all clean, [SR] Repairing 0 components
    EDIT: Uninstalled the recent system updates and rebooted - didn't help
    EDIT: Sysinternals Process Monitor results when running start service from services panel (procmon in elevated mode):
    filters:
    process name is svchost.exe : include
    operation contains TCP : exclude
    the events captured are:
    21:50:33.8105780 svchost.exe 772 Thread Create SUCCESS Thread ID: 6088
    21:50:33.8108848 svchost.exe 772 RegOpenKey HKLM SUCCESS Desired Access: Maximum Allowed, Granted Access: Read
    21:50:33.8109134 svchost.exe 772 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
    21:50:33.8109302 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services REPARSE Desired Access: Read
    21:50:33.8109497 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services SUCCESS Desired Access: Read
    21:50:33.8110051 svchost.exe 772 RegCloseKey HKLM SUCCESS
    21:50:33.8110423 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services SUCCESS Query: HandleTags, HandleTags: 0x0
    21:50:33.8110705 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Desired Access: Read
    21:50:33.8110923 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Query: HandleTags, HandleTags: 0x0
    21:50:33.8111257 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS Desired Access: Read
    21:50:33.8111547 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services SUCCESS
    21:50:33.8111752 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS
    21:50:33.8111901 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
    21:50:33.8112148 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS
    21:50:33.8116552 svchost.exe 772 Thread Exit SUCCESS Thread ID: 6088, User Time: 0.0000000, Kernel Time: 0.0000000
    NOTE: previoulsy, for
    21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
    I also got NAME
    NOT FOUND error ,so I created the new string value for the Parameters with
    the name ServiceDll and
    data %SystemRoot%\System32\wevtsvc.dll (copied
    from the upper HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog key)
    and this event now is
    21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
    I also checked for the presence of wevtsvc.dll in
    the place and it's there.
    Also, I tried to capture all events with path containing 'event' and
    got following events firing every several seconds:
    21:38:38.9185226 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Tag NAME NOT FOUND Length: 16
    21:38:38.9185513 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\DependOnGroup NAME NOT FOUND Length: 268
    21:38:38.9185938 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Group NAME NOT FOUND Length: 268
    Also, I tried to capture all the events containing 'file',
    excluding w3wp.exe,
    chrome.exe, wmiprvse.exe, wmtoolsd.exe, System and it shows NO attempts to access any file ih the time I try to start
    the event logger (if run from cmd - there are several hits by net executable,
    not present if run from the panel).
    What can be done?

    Hi,
    I don’t found the similar issue, if you have the IE 11 please try to update system automatic or install the MS14-029 update.
    The related KB:
    MS14-029: Security update for Internet Explorer 11 for systems that do not have update 2919355 (for Windows 8.1 or Windows Server 2012 R2) or update 2929437 (for Windows 7
    SP1 or Windows Server 2008 R2 SP1) installed: May 13, 2014
    http://support.microsoft.com/kb/2961851/en-us
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Installing forms 11gr2 services on windows server 2008 r2 64 bit

    hello,
    I successfully installed on windows 7 64 bit my developer forms & reports 11gR2 with weblogic 10.3.5 , jdk 1.6.0_+.
    Now i want to install in it in windows server 2008 R2 64bit, to deploy the application i created as a test.
    Question.
    1. Can I used the same installation set up , step, procedure as the development mode by only changing the installation mode to production mode in windows 2008R2?
    1.1 Do I need to create domain first after install the weblogic or it is like the development mode that the FRM_installation will create its classic domain?
    2. Can I used it without the fusion middleware?
    3. It is compatible version for forms 11gr2 for Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0) ? << doubted not compatible.
    4. It is valid if i only install weblogic server 10.3.5 without the fusion middleware? Am I or other clients can able to access it?
    5. It is will be a AS server even if without the repository creation?
    Note : i only need the forms&report server services to run our application on windows server 2008 R2 64 bit and compile respectedly.
    I ve done it with OAS 10g before but different procedures now since forms 11gr2 is using now weblogic server.
    Thank you very much.

    ... i want to install in it ... , to deploy the application i created as a test If you chose the "Development" install option during the installation of 11.1.2 you would have everything you needed to run your form. The only significant difference between the Dev and Deploy installation is the that in the Dev install type the Forms and Reports Servlets are deployed into the Admin server Managed server rather than creating a unique one for each. For local testing purposes, this should be sufficient for most cases. If on the other hand you need a full installation (Deployment), I would recommend that you choose this option, but be sure to also include the Builders. The Builders are available for both install types. I would not recommend attempting to have both install types installed together although it likely can be done. Having both installed would likely create confusion and difficulty during troubleshooting.
    Important point. If you choose the Deployment option and include the Builders during that installation, you do not need to start everything in order to run a form. All that is needed is WLS_FORMS. All other processes can be stopped if system resources is a concern. For an actual production deployment, it is recommended that you route end-user requests through HTTP Server, but this is not required unless you plan to use SSO or other feature that is managed through HTTP Server.

  • Backed up files partially disappear after restore (Windows Server 2008 R2 - Windows Server Backup)

    Dear all,
    I am experiencing a problem with "Windows Server 2008 R2", using Windows Server Backup.
    Here's my setup:
    Server: RAID 5 Disk setup
    Backup:
    By using Windows Server Backup (within Windows Server 2008 R2), C: and D: were fully backed up, with "System State" and "Baremetal Recovery" options selected. Backup went okay without any errors.
    Restore:
    By using Windows Recovery Environment  (booted from Windows Server DVD), C: and D: were fully restored to the original partitions with "System Recovery" option found within Windows RE (without re-formatting partitions during restore). Restore
    went OK without any errors. Rebooted, and system has been running fine. 
    Problem:
    After the restore, the system itself seems running OK; no BSOD, no crash, no visible errors.
    However, our client insisted some files (around 6 to 7) which are related to the propriety software has "disappeared" right after System Recovery.
    Question:
    Since Windows Server Backup is using "Volume Shadow Copy" technology which enables "live backup" of the running system, is it possible that some files will disappear (=restore error) after
    System Recovery?
    I cannot really find any errors or warnings related to Windows Server Backup in the event log, through. No Windows-backup errors. No VSS errors, too.
    Do anybody have experienced this kind of problem in the past?  Any suggestion will be greatly appreciated.

    Thank you for your reply, Ms. Mandy.
    To make things clear, let me explain to you briefly:
    1. The "missing data" was backed up with "full system backup".
    2. After a system restore from the above backup image, as you mentioned, partitions has been overwritten with the partions' backup data in the Backup Data Set taken by Windows Server Backup. No error with backup. No error after restore, and reboot - system
    has been running fine.
    3. Although there was a report that the affected files(about 7 java exectables) were missing after the above restore operation, other aspect of system was running fine at the time of the report.
    4. I have checked the original backup data set - and voila, there ARE files which seems to gone after restore.
    5. When I used Windows Server Backup "on" Windows Server 2008 R2 normal environment (= NOT Recovery environment from DVD) and selectd ONLY these affected files to restore, these files could be RESTORED successfully, without any errors. SO... data
    was property backed up.
    > The recovery will overwrite the partitions so files created after the backup point will be missing. 
    I understand, and this is not the case this time, because the affected files are already present in the backup data set (= I have mounted the backup data as VHD, and I could clearly see them present in the mounted VHD file)
    Plus, these files are completely restoreable via "selective file restore" in Windows Server Backup.
    Things I want to know/confirm:
    > The recovery will overwrite the partitions
    If I understand this correctly, in case that the files in question are already present in the backup data set, these files SHOULD be restored after full system restore, right? (If these files could not be restored, Windows Server Backup SHOULD show some errors.)
    What do you think, Ms. Mandy? :)
    Jo

  • Cannot see BITS service in Windows server 2008 R2

    Helo experts,
    I'm trying to enable BITS service in Windows Srv 2008 R2, where my SCCM 2012 primary server installed.
    But the BITS service is not appearing in IIS7.
    Want to make sure the service is running before upgrading to sccm 2012 SP1
    thanks in advance, if someone can show the way..
    Reg,
    Chandri

    Have you added the BITS feature using Server Manager? You must have. It was a prerequisite for SCCM 2012 RTM.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Client can not connect to Server installed window server 2008 and using 8.8

    HI all!
    I have a problem when Client  log in to server that installed window server 2008.It can not connect to this server even when restart and key in IP or Server name,...
    I try disable Firewall of window 2008 in server machine and client can connect to server. But when i disable firewall, it's mean  i can not use Remote desktop or terminal service..
    Now, how i can do in order to solve this problem.
    Thanks!

    Hi,
    Take a look at the admin guide (Page 75, 119, 159):
    [http://service.sap.com/~sapidb/011000358700000150922010E.zip]
    If you installed a firewall on the license service computer, make sure that the firewall is not set to port 30000; otherwise, the license service cannot work.
    If you are using Port X, make sure that you open Port X and Port (X+1) in the firewall. For example, if you are using port 10000, make sure to also open port 10001.
    The default communication port is 1143.
    The default port of the SAP Business One license server is 30000 for license communication and 30001 for the license naming service

  • Dynamic Cache Service for Windows Server 2008 R2

    We have problem with Metafile memory overflow on our server that described on a lot of topics.
    I need DynCache for win2008r2 server.
    Could you please help us with this issue?

    By design.  The memory management algorithms in Windows 7 and Windows Server 2008 R2 operating systems were updated to address many file caching problems
    found in previous versions of Windows.You do not need to install this additional service.
    http://blogs.msdn.com/b/ntdebugging/archive/2009/02/06/microsoft-windows-dynamic-cache-service.aspx
    http://blogs.msdn.com/b/ntdebugging/archive/2007/11/27/too-much-cache.aspx
    http://www.arabitpro.com

Maybe you are looking for

  • How to add DNS entry Post Installation in Solaris 10?

    Hi, I have installed Solaris 10 without mentioning the DNS entry while installation. How do I add that now in order to make that Solaris 10 to get connected to Internet ? Thanks in Advance. Girish Prabhakara.

  • Vlan0 Priority Tag stripped by SG200-08

    Hello All, My company is currently having issues with the SG 200-08, in that when we're sending an Ethernet Frame through the switch consisting of an 802.1Q VLAN 0 priority tag and custom payload, the smart switch is stripping the 802.1Q tag from the

  • Del Date not populating using bapi_po_create1

    Hi, I am using Bapi_po_create1 and am having a problem with delivery dates. The Po creates fine but the delivery date will not populate. here is the code i use to populate the Bapi wa_po_item_schedules1-po_item = line_c.     wa_po_item_schedules1-del

  • Dynamically creating XML document in XMLBeans via Schema

    Hello, Does anyone know if XMLBeans has the capability of creating a default XML document based on a schema, and if so give a few pointers on how to do this. Cheers, SB

  • Optimize Adobe PDF Size (Reduce) via Adobe LC Services.

    I would like to know if there is a Service provided by Adobe LiveCycle ES2 which will reduce the size of a given PDF (Static or Dynamic) something similar to what you get using Acrobat menu option Optimize PDF. Tarek.