Indexing network drives in windows 7 64 bit

prior to "upgrading" windows 7 I used a Microsoft add in to index my network drives, but it its not compatible with the windows 64 bit OS. Are there plans to update this add on or another way to index my NAS files on my local PC?  The device
runs linux on the backend so I cannot install anything on the server.
The existing add on is located below:
http://support.microsoft.com/kb/918996

I think I found a solution to the basic problem as it exists in my work environment - note that I'm on a domain computer with UAC activated and enforced.  Here's what I did:
Went to http://technet.microsoft.com/en-us/library/ee844140(v=ws.10).aspx and set the EnableLinkedConnections DWORD to 1 as shown in the article.
Created my network shares - for example I mapped drive S: to \\netshares.company.com\depts\sales\rep1\ and drive T: to \\netshares.company.com\depts\shared\salesreports\
The problem is that my shares are not the root folder and I don't have UAC access to the root folder (or even most of the folders in the folder path) and one can't just go to My Computer and right click on the mapped drive and set up offline files because it
doesn't appear in that menu.
So - I went to Control Panel, Sync Center, Manage offline files, View your offline files, and in that 'explorer' window select Mapped Drives, right click on each mapped drive, select  Always available offline.
Woo Hoo!  Somehow that worked for me.

Similar Messages

  • HP Photosmart C5580 , I need a network driver for windows 7 64 bit.

    hello all  ,
    this is the only driver supplied by HP for my printer and Windows 7 64bit :
    ftp://ftp.hp.com/pub/softlib/software11/COL30128/mp-74904-1/PS_AIO_04_C5500_NonNet_Full_Win_WW_130_1...
    as you can see it is listed as "NonNet" and as it is such I am unable to print from ANY other computer in my house , I have been trying o solve this for months , Complete reinstalls of drivers (hundreds of times) and complete reinstalls of Operating systems , this will not work.
    (also , the only OS's supported under this drivers listing are the Windows 7 family only , could this be the problem?)
    What I have running now:
    Main PC , Windows 7 64bit ( the printer is installed here with above and only driver , all software and buttons work and prints as it should)
    XP MCE Laptop (sees the printer , installs it , shows it as ready , will NOT print)
    Vista Ultimate 32bit ( sees the printer , installs it , shows it as ready , will NOT print) 
    Vista Home Pro (sees the printer , installs it , shows it as ready , will NOT print)
    I am at a total loss other then this driver just is not right , maybe because its not a network driver??  I don't know but I am out of things to try , I have tried adding the port , finding the printer through the ip yada yada on all the PC"s , nothing works
    PLEASE if anyone has an answer or direction for me to go , please help.
    thanks , have a wonderful day.

    I'm not on a wireless netowrk , I have a fully wired network...still no printing (from other computers) if the C5580 is hooked to my Windows 7 64Bit PC
     I had to put the C5580 printer and drivers on one of my Vista PC's (in another room) and now all the PCs (even the windows 7 64bit) prints to that pc , the ONLY problem with that is I need that printer/scanner on my Windows 7 64 PC and need the other PCs to print to it , because I need the scanner and software in here.

  • How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

    How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

    What printer?  What router?
    Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Can I bring files from a NTFS formatted external hard drive (from Windows XP 32 bit desktop) to my new macbook pro retina?

    Can I bring files from a NTFS formatted external hard drive (from Windows XP 32 bit desktop) to my new macbook pro retina?

    What are these files you are trying to copy over?
    If they are program specific and there is no program on a Mac to read them then you'll have to find either a Mac version of that program or one that does the same thing and can read those files.
    The file extension should not change just because you connect a NTFS formatted drive to a Mac computer. A Word Document is still a .doc/.docx ad the same for all other office type programs. Music files with an extension of .MP3, or whatever, should read the same on both system. Same goes for all other files like images with a .JPG extension.
    Yes I would network them.
    I would not use Migration Assistant. There is nothing on your Windows PC that can be used on the Mac other than your personal data files. No programs or settings can be carried over from Windows to OS X.
    marimbapony1 wrote:
    Also, when I view the files from the external hard drive, they show up as .nbz and are not recognized by any program on the Mac. Should I just abandon the hard drive option and start sharing files through the LAN approach?

  • Laserjet 1300 Driver for Windows 7 64 Bits

    Come on HP - I need the driver for Windows 7 64 bits for my HP Laserjet 1300 series.
    I installed a generic driver which works OK for some applications.
    But when using my Stenograph application the box that should be printed
    around the text on the printed page is NOT correct: I only see the top and left side of the box shifted by 3 inches.

    rainbowdog97 wrote:
    Thanks very much for replying to my message. I got PCL 5 from both places -- from the Windows Update list and from the HP website. If it helps, at the hp website it is at:
    http://h20000.www2.hp.com/bizsupport/TechSupport/S​oftwareIndex.jsp?lang=en&cc=us&prodNameId=238322&p​...
    You can get to it through www.hp.com/go/windows7, where I also got PCL6.
    I have a lenovo thinkpad x300, and connect to the LJ1300 with a USB. I installed PCL5, for example, and tried to print a simple text. But my printer does not respond (the light doesn't start to blink), and when I use the Print function, it gives me a message that indicates "error, 1 document".
    I will be off of my printer for a couple of weeks but want to be up and running soon. I had hoped installation of Windows 7 wouldn't be dramatic.
    Thanks once again.
    The links you cite take you to a page where there are links to:
    HP Universal Print Driver for Windows PCL5 x64
    HP Universal Print Driver for Windows PCL6 x64
    HP Universal Print Driver for Windows PostScript x64
    As the name suggests, those drivers are intended to substitute for the "real" driver that is specific to a given printer. They primarily are intended for use where a network administrator is responsible for a variety of HP printers on a single network. See http://h20338.www2.hp.com/Hpsub/cache/343033-0-0-2​25-121.html  Personally, I found the "Universal Print Driver" impossible to install and configure.  Congratulations on installing it -- even if it doesn't work.
    On the same page that you linked to, there is a link under the heading "Driver" that leads to "Product Support for Windows 7."  That link basically leads nowhere useful for Windows 7.  The conclusion that you're led to by these pages is that the only choice for Windows 7 is one of the Universal Print Drivers.   This conclusion is erroneous.
    I can't reconstruct how I found it, but if you go to the link in my previous post (http://h20000.www2.hp.com/bizsupport/TechSupport/D​ocument.jsp?lang=en&cc=us&taskId=120&prodSeriesId=​...) you'll get to an HP support page for using HP printers with Win 7.  Essentially, this page divides various HP printers into 6 categories and describes your options for each category:
    HP and Windows 7 printer driver options available for the selected product
    HP print driver available
    Windows 7 print driver available
    HP LaserJet AIO/MFP product options
    Product will be supported
    Selected product is not supported in Windows 7
    The Laserjet 1300 is listed as a Category 3, which means that a driver specific to this model is built-in to Windows 7.  This is not the Universal Print Driver.   The catch is that the driver for the Laserjet 1300 isn't available in Windows 7 out-of-the-box (at least, that's what happened in my installation).  It only shows up if you permit Windows Update to update the list of built-in printer drivers.
    I suggest that you completely uninstall your LJ1300.  Disconnect the LJ1300. Then, right click on its icon in Printers and Devices and select "Remove Device."  Then click on any other printer listed and then click on "Print server properties" in the menu bar.  Click on the Drivers tab and Remove the Universal Print Driver (or whatever else looks like it's related to the LJ1300.  Uninstall anything to do with the Universal Print Driver from Control Panel >  Programs > Uninstall a program.
    Now, you can take one of two approaches:
    What I did was just plug the printer in and turn it on.  If you've managed at some point to update the list of built-in printers, Windows should just identify and install the printer like any other USB device.  Otherwise, you should get a popup asking you to give permission to search the web for a driver. Grant the permission.  Windows will find the correct driver and install the printer.
    Alternatively, go to Devices and Printers and start the Add Printer wizard.  Tell it you're installing a local printer to LPT1.  You'll get to the list of built-in printer drivers.  Select HP in the left pane and scroll through the right pane.  If you find the PCL5 driver for the Laserjet 1300, cancel the process and then add the printer as in the paragraph above.  If you don't find an entry for the Laserjet 1300, click the Windows Update button.  After a couple of minutes, the process will be finished, and now when you look there will be the PCL5 driver for the Laserjet 1300.  Cancel the process and add the printer as in the paragraph above.
    Good luck.

  • HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

    HP Officejet 4255 driver for Windows 7, 32 bit.
    Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing. 
    After upgrade to Windows 7, it has become a problem. Some solution should be given.
    Can someone help?
    Regards,
    Raul

    Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
    I tried again the GPS, and it wasn't working.
    Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
    Result: now GPS is working (same place, same conditions, just 5 minutes later)!
    Don't know where the difference is...
    600, R52, T61p, X301

  • Location is not available to mapped network drive in Windows 8 using Synology NAS

    Original Thread:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/location-is-not-available-to-mapped-network-drive/ca7eac5c-0e3d-494b-b488-e245978e4db9
    I have recently upgraded to Windows 8.1 standard edition. I have come across a problem when using the option for mapped network drives. Under Windows 7 I would normally map a network drive (Synology NAS) and I could access all files, copy and paste, install
    apps, and link media, all from within the mapped network drive. However, under Windows 8.1 I have come across a couple of problems.
    1. When I try to copy a file from my "Mapped Network Drive" to the C:\Drive (OS Boot Drive), I get the following error,
    "E:\ is unavailable. If the location is on this PC, make sure the device or drive is connected or the disc is inserted, and then try again. if the location is on a network, make sure you're connected to the network or internet, and then try again. If the
    location still can't be found, it might have been moved or deleted."
    However, if I copy a file from the "NETWORK/Network Location" the file copies just fine with no problems. And, If I also copy a file from a "Added Network Location" the file also copies just fine with no problems. And, if I copy a file from
    my "Mapped Network Drive" to my D:\Drive (non OS Drive), the file copies just fine with no problems.
    2. When I try to install apps from my "Mapped Network Drive" they will sometimes install and sometimes not (I am also choosing the option to run the programs as Administrator). Again if I try to install using either the "NETWORK/Network Location"
    or an "Added Network Location" the apps install just fine with no problems.
    3. When I link media (music or videos) from my "Mapped Network Drive" they will work but once I reboot they no longer work as if they have lost the file path or link of the original source location.
    4. When I use FireFox (browser) and I set my default download dir to my "Mapped Network Drive" it will work once originally set it but after I reboot, it no longer works. However, again if I set the default download dir to either the "NETWORK/Network
    Location" or an "Added Network Location" the default download dir works fine even after reboot.
    While I am able to access my network drive using any of the three options, "Mapped Network Drive", "NETWORK/Network Location", and "Added Network Location" but only "NETWORK/Network Location", and "Added Network
    Location"appear to be reliable. Tbh I would prefer to be able to use my "Mapped Network Drive" in Windows 8 as I have been able to under Windows 7.
    More info:
    I currently have UAC set to "Never Notify".
    I also have Windows 8.1 installed on three different systems and all of them give me the same exact problems. One of the systems is a completely clean install with no 3rd party apps installed.
    Just so its clear I am able to access the "Mapped Network Drive" but unfortunately this method of access appears to be unreliable in Windows 8 but in Windows 7 it works flawlessly.
    If I map a network drive from another pc running windows 7 or 8, I can access and use the mapped drive with no problems. This problem appears to be related to the Synology NAS devices and I have researched the Synology forums but only found one thread about
    the problem, here:
    http://forum.synology.com/enu/viewtopic.php?f=49&t=76687
    I have searched several forums and attempted to pick the brains of my local computer shops for any incite on this problem but I have been unable to find a solution/fix.
    Any help resolving this is greatly appreciated.

    Hi,
    Based on your description, we can temporarily disable the firewall to see whether the issue persists.
    For this issue seems related to the Synology NAS devices, in order to get professional help regarding the product, we can contact the vendor support to see whether the issue
    can be fixed.
    Best regards,
    Frank Shen

  • HP Photosmart 325 driver for Windows 7, 64 bit

    I cannot find a driver for Windows 7, 64 bit to run the Photosmart 325 printer. Does one exist? Is there a work around? (The driver for Windows 7, 32 bit does not work)

    Use the Photosmart 320 series driver available through Windows Update.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • X301 and Vodafone and AT&T Wireless WAN (HSPA) Driver for Windows 7 (32-bit, 64-bit)

    Ok, I (Lenovo) did it again.
    System Update showed me this update: "Vodafone and AT&T Wireless WAN (HSPA) Driver for Windows 7 (32-bit, 64-bit)".
    As I'm using Vodafone and I had a AT&T driver, I decided to update.
    The result is, that now the GPS doesn't work.
    Yes, I'm in a place where the GPS signal is present (my house, with the previous driver I was able to get 6/7 satellites).
    What happens? Lenovo TV GPS stays there trying to fix the satellites, but nothing happens. I can't recover the system to a previous state, as I updated Flash player too, and Windows only show me the possibility to roll back this update.
    So, apart advicing everyone not to update, I kindky ask:
    - where can I found the previous driver? I searched the web without success...
    - why does Lenovo deploy driver which can cause problems (I just had one updating the BT driver last week! .msi installer problem, error 1935...)?
    Thanks to everyone
    600, R52, T61p, X301

    Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
    I tried again the GPS, and it wasn't working.
    Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
    Result: now GPS is working (same place, same conditions, just 5 minutes later)!
    Don't know where the difference is...
    600, R52, T61p, X301

  • Recovery drive corrupted Windows 7 64-bit

    Hi all,
    My laptop came with recovery drive of Windows 7 64-bit. I once re-installed windows from that recovery drive. Some
    time ago I installed some software after that "Windows not genuine" message start appearing. Then I tried to re-install Windows from Recovery Drive. But I come to know that my Recovery Manager is not working (Pressing F-8 while starting system, and
    directly starting Recovery Manager from Programs)  I have consulted some technical people they says that your recovery drive is corrupted. What should I do now.
    Thanks!

    Hi all,
    My laptop came with recovery drive of Windows 7 64-bit. I once re-installed windows from that recovery drive. Some time ago I
    installed some software after that "Windows not genuine" message start appearing. Then I tried to re-install Windows from Recovery Drive. But I come to know that my Recovery Manager is not working (Pressing F-8 while starting system, and directly
    starting Recovery Manager from Programs)  I have consulted some technical people they says that your recovery drive is corrupted. What should I do now.
    Thanks!
    Don't turn on your computer anymore.
    Take your computer to a professional who can possibly recover whatever data may be recoverable on your hard drive. Tell the professional the software you downloaded that started causing the problem regarding the "Windows not genuine" message appearing
    so the professional removes that software from the recovery if they can.
    The professional will be able to diagnose what the issue with the harddrive or your computer is. Possibly the hard drive is failed and no data can be recovered from it. Possibly something on the laptops motherboard is bad so the hard drive can not be accessed.
    The laptop may need a new hard drive. Which may require the professional to install Windows 64 bit OS on the new harddrive.
    Plan to spend money.
    May be cheaper to buy new laptop and throw old laptop away.
    Don't install that software on your laptop again.
    La vida loca

  • Map Network drive in Windows 8.1

    Hi Guys,
    I was suffering a weird problem about mapping network drive in Windows 8.1.
    I ran the command "net use ...." to map a network drive and the command was running successfully. Then I used the "net use" command to check the status for the network drive mapped before, it showed good. But when I opened "my computer",
    I couldn't see the network drive mapped before in the explorer.

    Hi,
    After you created the mapped network drive with "net use", are you able to find the mapped driver letter information in the registry HKCU\Network?
    Please also try to map the network drive via GUI tool under Explorer "Map network drive" option, check the result.
    for net use command, please make sure that you've set the correct parameters
    https://technet.microsoft.com/en-us/library/gg651155.aspx
    Yolanda Zhu
    TechNet Community Support

  • Photoshop CS6 is not showing any network drives within windows 8.1.

    Photoshop CS6 is not showing any network drives within windows 8.1, I can only browse the local disk for files. Please advise?
    And when i try opening a file directly from the network, photoshop starts but does not open the selected file?

    The dialog you show there looks like it may be a CS6 open dialog running on windows 8.1 that is showing what is local.  Network is not highlighted selected.
    Here is a CC Open one windows 7 pro showing  areas of what is accessible.

  • Hp pavilion 15-n011tu display driver for windows 7 64 bit

    pavilion 15-n011tu display driver for windows 7 64 bit give me the the way from which i  am abel to get driver for my pc

    Hi:
    Download and install this driver...You want the first file listed (.exe).
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3719&DwnldID=23405&ProductFamily=Grap...

  • Desskjet 850c driver for windows 7 32 bit

    Hello folks
    Does anybody have a link for a deskjet 850c driver for windows 7, 32-bit,if there is one out there,I don't really want to replace this printer as it has been excellent!

    Hi:
    Try the 3rd driver (4th item) on the list at the link below...
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy​...

  • Please help me to find.. compaq presario f762au sound driver for window 7 32 bit.

    please help me to find.. compaq presario f762au sound driver for window 7 32 bit..
    This question was solved.
    View Solution.

    Hi,
    It does not make any sense. Based on its support page, it uses "Conexant HD-Audio SmartAudio 221 Driver"  for Vista
      http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3689...
    and now it can't see for Windows 7:
       https://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-75899-1
    Please try the following methods:
       http://windows.microsoft.com/en-US/windows/help/no-sound-in-Windows
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • How do I stop iTunes back up from deleting my photos?

    So I went to add some music to my iPhone last night, having added some stuff to iTunes. It was the third time I plugged my iPhone into the PC, having used itunes to sync it, activate it and all the rest. Plugged it in and was greeted with "welcome to

  • How can I delete my Adobe account completely?

    How can I delete my account cpmpletely? I could not find any hint how to get this done...

  • Problem with Linksys WRT54GS router? Please help.

    Alright, so I have the WRT54GS, and for the longest time after I bought it, it worked just fine, but I've been experiencing problems lately. We have 2 computers running off the router. One is a wired connection, and mine is wireless, which I'm starti

  • Can you use Sibelius sounds with Logic?

    Sibelius comes with it's own orchestral sounds (Kontakt sounds). I know you can buy the Kontakt sounds separately BUT does anyone know if Logic will play the ones that exclusively come with Sibelius. I'm wondering if Sibelius comes with some code tha

  • How to create a home dirve through OIM

    How to create a sharedfolder at the time of user provisioned to AD.pls let me know any one done this.Its very argent...I am new to this. Thanks in advance. Edited by: 790561 on 8/08/2011 15:44