Indication events used in the storyboard

how can I see which events/scenes are used in the storyboard?
I seem to remember (yet not enough :OP) a dot can be shown on the used scenes?
Tx!
Werner.

tx Tom,
if "clip indicator" indeed shows/marks which scenes are used in the storyboard, that would do the trick.
However, opening "view" does not show "clip indicator" in our FCP X 10.0.07, using Mac OS X 10.6.8
Any alternatives?
Tx a lot!
Werner

Similar Messages

"The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?

I don't know what's wrong with my Mac Mozilla Firefox, version 3.6.8, but today, it started alerting me about an error message on the "Error Console". In every website I visit, it tells me: "The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?
I saw a pop-up which did not allow me to click it when I scatter the windows on my Mac. I was using Private Browsing, with pop-ups disabled, but one pop-up managed to get passed my settings, and open in another window. It would not allow me to select it, so all I did was to close Firefox, and start a new session. So far, everything has been normal, I also deleted the cookies it installed.
But, I still keep seeing that "Error Console" notice under my "Tools" on the Menu Bar, and when I clicked on it, it listed errors (such as what I listed above).
Would someone explain this to me?
Thanks for your help!

The messages you see in the Error Console are mostly to assist the web site's author in resolving compatibility problems. Some of them can assist you in determining why a web site doesn't work as intended. The one you mentioned doesn't sound that suspicious, except that it occurs on many sites. Perhaps one of your add-ons is trying to monitor what you type?
To diagnose whether this is caused by an add-on or one of your settings, you could try the following:
First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, try starting Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
Does that resolve the errors? If so, then an add-on usually is the culprit. If not, try creating a new (blank) profile: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
If the new profile works correctly, you can choose between further research on your old profile or moving key settings like bookmarks from your old profile to the new one. [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
Hope this helps.

FCPX: In Event Library: how to know if a video was used in the timeline of Final Cut Pro X?

In Event Library: how to know if a video was used in the timeline of Final Cut Pro X?
An example: In Premiere Pro, the whole video is added to the timeline identified as used in their video library. Facilitating our work on a big project, not to repeat videos. You can do this in FCPX?

The way it works in FCP:
Working from the Timeline Index, you can see lists of all clips in the sequence and their location in the timeline.
You can also do a search (kevn) to narrow the results.
Russ
hth.
Russ

Updating data in User Event doesn't propogate to uses of the User Event type

So I have a user event which is seeded with a cluster in which there are a few typedefs. Now, as you might expect, I have to pass the user event to different VIs so that they can trigger the events which are interpretted by a main vi. Pretty simple and all is happy. There's one rub though: one of my vis which is passed the user event is called by reference. The call by reference vi requires a certain vi pattern when you create the reference for the vi (namely, a strictly typed vi reference), which includes the user event type. Now, sometimes, I update the typedefs in the data type of the user event. This means that user event type changes. Now, what's maybe not too surprising, is that either the user event type doesn't update with the type def or that the type specifier vi constant doesn't update with the change in user event type. This means that every time I have to go back and create a type specifier based on the updated pattern for the vi which takes the user event as an input.
Is there a way for labview to automatically do this? One way to fix it, I'm sure, is to change the user event input into the vi I call by reference to a variant. Then inside the vi I call, to type cast the variant with the output of a Create User Event vi that has been seeded with the appropriate cluster of typdefs. But that seems pretty silly (like, why not just make EVERYTHING a variant). Any ideas?
- Chris

Take a static VI reference (from the app control palette), drag your subVI into it, right click it and make it strict and wire it into the type input for the Open VI Reference primitive. Now it should always update.
Two more advantages you get from this is that now the VI is in memory, so it will automatically be included in your build and that you can use the VI Name (or VI Path) property from the static reference to get the name for the Open VI Reference primitive and it will always work correctly.
Try to take over the world!

In iPhoto, how can I find a particular event using the search function?, In iPhoto, how can I find a particular event using the search function?

In iPhoto, how can I find a particular event using the search function?

NO - read my last answer over a year ago
That is because iPhoto is all about photos - not about files
You do not access the piles in iphoto - you access the photos using either iPhoto or the media browser - see this user tip for photo access details
LN

A glitch in my use of the change event

I have a script in the change event of a drop down list field that works when a certain choice is made then another field becomes visible. I am trying to get that field to become visible when when a record from a database populates the field the correct value. Right now all that happens is the drop down field shows the correct value but the field in question isn't visible.
Here is the code I am using for the change event.
var contractLangs = xfa.event.newText;
if (contractLangs == "Creative Works Unlimited")
xfa.form.form1.MainPageSF.ContractSF.ContractLanguageSF.presence = "visible";
else
xfa.form.form1.MainPageSF.ContractSF.ContractLanguageSF.presence = "hidden";
I can't figure out how to get the field to become visible when right value goes into the drop down field.

I don't think I have been explaining this very well so here is another try.
I have a Drop-down List called "ContractTypeList" that has three items in the list;
Limited Permission
Creative Works Unlimited
Commission for Creative Works
If Creative Works Unlimited is chosen a hidden Drop-down List called "ContractLanguageList" becomes visible otherwise if either of the other two are chosen then it is hidden.
I would like the "ContractLanguageList" to be hidden or shown depending on which item shows in the Drop-down List when I cycle through records in a database. Right now it only works with user interaction.
I'm not sure what to do. I have been using the line, xfa.even.newText. If anyone can help me out it would most appreciated.

Does Editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

Does editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

C5ELEN wrote:
. Didn't we have that in 7? Seems like I remember we could set the number of undo levels.
Legacy FCP has Revert Project to return to the last saved version, and it has Restore Project to go back to one of the autosaved versions. The maximum number of undo's can be set in user preferences. A lot different than X.
Russ

I'm using imovie 10.0.3 with OS x Version 10.9.2. or some reason I can't double click on iphoto events to siadplay the pictures within that event. I've rebuilt my iphoto library, but nothing seems to work. Any help would be appreciated.

I'm using imovie 10.0.3 with OS x Version 10.9.2. or some reason I can't double click on iphoto events to siadplay the pictures within that event. I've rebuilt my iphoto library, but nothing seems to work. Any help would be appreciated.

Hello All,
Also no answer but am having the same problem. All my catalogueing via folders is up in smoke and no external HDs (where I would normally directly store raw footage when importing) showing up on the iMovie interface. It is a pain the arse to go back to the earlier version - why APPLE, pray tell, do you continue to lower expectations user-friendly functions. Shall try the option+open for a library but this too is extremely inconvenient if it works like iPhoto because you have to log out to log in to a new library whereas I just want to be able to see my multiple HDs directly from the iMovie menu and then the folders within folders I have layered in there - to make it easy to FIND STUFF. Wake up Apple, you are NOT meeting your customer's needs or desires.
Thanks to the posters who are helping the rest of us lost in the dark with possible solutions - free fix-its for Apple which they don't deserve.

Warning: "No terminating events defined for the task used"

Dear all,
I created a task with ABAP class and method as its object method. This task is a background task. The ABAP class inherits the IF_WORKFLOW interface but doesn't implement any method of the interface.
When I try to confirm the task settings in transaction SWDD, a message shows up "No terminating events defined for the task used" and I cannot continue the work. Does anybody have any idea what I should do?
Thanks + Best Regards
Jerome

Hi Jerome,
If you set a background task in your workflow, and if it is asynchronous, then you need some way to tell the template if it is finished and what happened. In this case you set terminating events - that is events which are published in the system as a result of your method (ie document.posted etc).
Either use a synchronous method for your task or set appropriate terminating events in your task setup.
Regards
Gareth

I have recently updated to iPhoto 9.2.1, more by accident I guess. In the older version off iPhoto when I imported photos and gave the event his own name, this name was also used in the "masterfile"

I have recently updated to iPhoto 9.2.1, more by accident I guess. In the older version of iPhoto when I imported photos and gave the event his own name (for exampample "110723 birthday son 2011"), this name was also used in the "masterfile", so I could find the file by his name ("110723 birthday son 2011") in the "masterfile" on my HD and copy and paste it from there to other computers.
In the new version the file gets stored under a seemingly random number, which does not give me any information about the content.
Is there a way to fix this? Would it be different in apperture?
Thanks
Harald

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that. To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it. I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
When I am trying to upload a photo to the web, I get the Finder folder showing with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth. This is a folder name that I cannot find in my HD anywhere when I look for it. If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly). How do I get my folder of edited photos to show when I want to upload a picture to the web?
Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

How can i make changes from the user in TabBar with more button persistent? I´m using the Storyboard.

I have build an App with more than 5 Tabs, the user can change the order of the items, but this is not persitent.
How can i fix this on iOS 7 and i´m using the Storyboard.

Can I do it afterwards ?
Yes. In addition to what Bee Jay said, here are some other tips.
First record a pattern that's a few bars long, and don't tweak any knobs while you're doing this. Set a Cycle Range, because we want to play this pattern over and over again. Press A to make Automation visible (although there isn't any yet).
Find the channel strip for this track, either in the Inspector or in the Mixer window. Just above the meter, look for the button that says "Off." Hold down this button and a menu will appear. Select "Touch." Press Play. As the pattern plays the first time, pick a knob in the ABL2 window, and mess with that knob. At the end of the pattern, let go of the knob, and then watch what the knob does as the pattern plays again. Then as the pattern plays some more, mess with another knob. You'll notice that curves are being drawn in the Arrange window as you mess with the knobs.
This should help get you started.

What to use for the events of 2 keys pressed simultaneously?

Question:
What to use for the events of 2 keys pressed simultaneously? As the key listener has limited functionality, in this case, I need something that can act to two events (see below)
Goal
1. A user presses right and up at the same time
2. Program responds to this event changing BOTH the vertical and horizontal speeds of the player
Problem
I currently have a key listener to do this, using key pressed, however, it only acts to up OR right at one point in time. So the user can only increase his or her vertical speed; or horizontal speed at one point in time. Instead of increasing them both.
Example
Here is an example of the game: http://www.kongregate.com/games/MINDistortion/bubbles-2

DarrylBurke wrote:
I don't know whether there's a better way (or whether this will work as expected), but I would try setting a boolean flag on keyPressed and reset the flag on keyReleased, for each key of interest. To compute the x / y movements, I would check the state of all flags.
dbI was thinking about your answer a few nights ago. And I was like, wait... it works! I thought, at first (as I replied before) that it wouldn't work, but I refract what I said. Its actually a very simple solution. And I apologize for questioning your solution previously. Thanks so much!
P.S. I tested it out. Works like a charm.
-Create booleans to handle each key
-Set to true on press
-Set to false on release
-Check and update in separate thread accordingly

How do i include named event handlers in the event loop without using the optional preregister/postregister clause.

The register statement in preregister/Postregister clause is especially useful for including named event handlers in the event loop.

I think you need to read the doc. before asking the questions:
http://docs.iplanet.com/docs/manuals/uds/50/toolref.pdf
page 151-161
ka

Multiple instances of the same calendar events using Oulook and Desktop Manager

BB Curve 8310
OS 4.5
Desktop Manager 5.0
Theme = Dimension Today
Outlook 2007 “full version”
Using two POP3 email accounts. One is a personal gmail and the other is most important a business email. I do not use gmails calendar.
12 Months or so back I would sometimes get duplicate appointments in my BB calendar after a sync but Outlook showed a single appointment. I had read that it was intermittent with the theme “Today” and the advice was “do not accept appointment invites in Outlook”.
I forgot and accepted several I the past week. Now almost all my appointments are doubled up in my BB and again, my Outlook seems fine. I just noticed that I can now select which calendar to “show” in my BB.
Is this caused by getting an email invite to an appointment?
1)   Does anyone know what is causing this?
2)   Could you suggest a quick fix?
3)   Could you suggest a permanent fix?
Thanks
Patrick
Solved!
Go to Solution.

PatS wrote:
Thanks Bifocals ,,,,, I'm blushing just a bit. I'd put one of those red smiley faces but I would have to post another question to find out how!
BB Calendar CICAL = personal email
BB Messaging CMIME = work email
This is not correct the default services values need both reflect the main email associated account.
They need to both be your work address. This could very well explain the duplicates
Outlook has/uses only the work email address show it has to be the default one - I have long ago deleted my personal one from Outlook.
Outlooks Calendar Data File recurrence (none) 339, in Outlook 2007 I had to find them a different way but I think it's what your looking for.
My BB shows a "default" = 217, "personal" = 185, and "work" = 309
The records in the device default calendar will not synchronize. The are in effect "orphaned"
records that at one time belonged to an email address. Usually caused by deleting the email account or losing the service books for the email account. We need to remove them
can you tell what email account they were created from? And where they would logically be moved?
A couple of notes - now that you have had me flipping through different areas I have noticed a few interesting things that maybe would be beneficial. While using Outlook 2003, I used several email addresses. Don't know if Outlook updates to 2007 or installs a new 2007 program using data from 2003. There was a time that I was sending emails in Outlook from my personal account, there was a slight hiccup and every so often it would revert back, hence I simply deleted it.
I would need to verify it, but I'm pretty sure that the email addresses would have to be installed again.
I'll split that one with you. I'll take the Blackberry knowledgebase. You take the Microsoft outlook support site
I'm now wondering if I delete all the calendars on my BB and do the one way sync? That seems simple enough.
We are gong to do just that, to repair what happened. It will not prevent another recurrence.
You asked for three things:
You wanted a a reason this happened, I think we found it in the default services setup.
You wanted a quick fix, It will be done in with an hour's work.
You also wanted a permanent fix, Want to go for all three?
If you have multiple calendars you will have problems. It's just the nature of the beast.
It's not an "if " but just a matter of "when" deal!
Personally I can't find any logic in the concept of multiple calendars.
People explain they use one for work appointments and one for personal appointments.
I always want to ask why they don't use two watches one for personal and one for work?
I do see the need for separating personal and work email accounts.
Here is I think the best of both worlds answer.
Leave your work email configured and use the work calendar as you would normally.
For your personal email install the Gmail for mobile application. You have access to your
personal and work emails, they are kept separate due to the nature of the Gmail app.
Here is the the cherry on the top. The Gmail app doesn't install a calendar.
So two email addresses one calendar, ain't life grand!
So here is the plan Stan, let me know what you think.
1) On the Blackberry options advanced options, default services. Match both options to your work email.
2) Decide what needs to happen with the 217 device default "orphans".
Also 185 personal records. Are they worth keeping, can they be sent to the work calendar, do they need to be on Outlook.
3) Read this article you can see your options and help you make the best decision.
KB19240 How to merge multiple calendars into one calendar on the BlackBerry smartphone
Read about the Gmail for mobile app see if you think it will work for you: Gmail mobile app
If you don't like it or don't think it's a good fit just let me know and we can go a different way.
Let me know what you want to do,
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How can I reduce the number of event cases in the main VI?

I would like to reduce the number of event case of the event structure in my main VI. E.g. I would like to have pop up window with a table when the user double click a table row. Nothing more simple than this: add a case to the event structure trigger by double clicking the table, read the table row ... But in my main VI I would have lots of them and the event structure gets crowded with minor tasks. One solution is using XControls. But is there any other recomended way to handle selected events separatly from the event structure in the main VI?
to clarify: I don't want to distribute the whole event structure. (In this case the code would not be maintainable) But I would like to handle certain context specific events in a differnt place. If I have them all in the main VI the drop down list of the events in the event structure exceeds the windows size and the program becomes difficult to maintain because one looses the overview.

"Strictly forbidden" is not true. But highly not recommended. The reason is simple:
1. Code can react unpredictable. Dennis already stated some things about that in your linked thread.
2. Code is not readable and therefore not maintainable. Each event source should have only one event structure for its events. Since the UI is a single source, events from there should be captured in a single event structure. It is recommended to use this event structure as producer in a producer/consumer design pattern in order not to block the events.
3. You will most propably need timeouts in your event structure which completly negates the advantage of event driven programming. Either use event driven programming or stay at polling. Do not mix (most of all because of maintenance).
Regarding your "advantages" you listed:
- Clustering reduces readability in therefore should never be done. Additionally, it requires timeout cases in most places which is not recommended.
- If you have such many events and interactions in your "sequence", it is a clear indication that you chose the wrong architecture for your application.
Please see attached example. Since i am not used to program with more than one event structure (except if i have different dedicated event sources), the example is "constructed" and therefore may lack of "realism". Nevertheless, it shows some issues which might occur:
- Blocking calls within the events lead to the fact that the UI is not responsive for the event time (FuncA). Nevertheless, interaction is still enqueued and if the blocking call is over, all those interaction are executed. In the example, please press FuncA and then press FuncC immediatly. You will see that nothing happens and after the 5s blocking call, the FuncC dialog appears. You also can switch tabs, but the visual display will update only after the 5s blocking call.
- In order to keep the UI responsive, FuncB is configured not to block the UI. But this is no solution: Press FuncB (on page 2) and the change to page 1 and press FuncA. Additionally, press FuncC. What happens? Just to mess things up, press Stop as well......do this combination several times. It is possible that only the lower loop is finished and the VI is still running even if Stop has been pressed.
Please note everyone that the attached example shoudl strictly be seen as "NEVER DO IT LIKE THIS". This is a negative example and shows the approach which is not recommended by any means!
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.
Attachments:
Never EVER86.vi ‏10 KB

Indication events used in the storyboard

Similar Messages

Maybe you are looking for