Indicator and keyboard

my keyboard is not working and the indicator is green , so i can see people calling and messages sent to me but i cant open any of them , so what can i do ?

Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Mouse pointer and keyboard out of control

    The mouse pointer and keyboard can not control. Only powe button can use.
    The system is still running. The clock and battery indicator is still working
    how to solve?

    Not a solution, I'm afraid, just concurring -- I am experiencing a very similar problem with the keyboard, but not the mouse pointer. I get an intermittent temporary freeze lasting maybe ten seconds, after which it recovers. Although I suspect waking the machine from sleep may set these off, I couldn't swear to it, and I have experienced several of these sequentially, maybe five minutes apart.

  • Why is my mouse and keyboard freezing up?

    Imac G5 with OSX 10.5.8, and imac G5.2 with 10.6.8
    The same problem after transfering my folders from the G5 to the G5.2
    I have to keep unpluging the keyboard and pluging it back in again, to free the mouse or keyboard.
    I've changed both the mouse and keyboards.
    I've done the both the SMC and PRAM resets,  permissions fix, and virus searches.
    No results.
    This is a long discussed problem, has anybody found a fix?
    Please lemme know.
    Thanks

    Pedestrian1980,
    Hate to say it but you are either posting on the wrong forum or don't know which Mac you own. This is a Intel based iMac forum, as all G5 iMacs were PPC based that would indicated you are on the wrong forum. If you have an Intel based iMac (click About this Mac and check for the microprocessor) then you are on the correct forum.
    You did not indicated if the keyboard or mouse are wired or wireless and if they are Apple or not. However, after determining if you have an Intel based iMac then redo the SMC and PRAM resets at least 3X each back to back and then retest. To be sure you are doing each reset correctly please click
    https://discussions.apple.com/docs/DOC-3603
    for directions.

  • Satellite A660 - troubles with Wi-Fi and keyboard

    Hi everyone,
    I bought this Satellite A660 3yrs ago. I found the Wi-Fi no work suddenly half year ago. I tried to use fn+f8, it show that "Wireless communication is disabled. Please turn on communication switch".
    Then I had to use LAN connectivity.
    Other problem appeared 3 weeks ago, the keyboard cannot work correctly.
    When I start Windows and use mouse click a item or document, many items or documents will be selected, look like press 'shift' at the same time.
    And press keyboard, just appear capital letters and number, cannot use "@#%&*(" etc. if just use fn+num lock, it dont change anything.
    If I use fn+f1 firstly ,then go back windows, then use fn+num lock, and mouse and keyboard are good.
    I tried to reinstall VAP and WLAN, reset BIOS to default, it was not useful. I use recovery os today, but the problem is still there, no Wi-Fi, no good mouse and keyboard. I have no idea now.
    Please help
    Sorry for my English

    Hi
    Regarding the keyboard issue:
    I think you should connect the external USB keyboard. In case the external keyboard would work properly, the problem is related to your internal keyboard and this need to be replaced.
    Regarding the WLan issue:
    >Wireless communication is disabled. Please turn on communication switch"
    I found an solution on the Toshiba US page:
    [Satellite A665- "Wireless Communication is Disabled. Please Turn On the Wireless Communication Switch|http://support.toshiba.com/support/viewContentDetail?contentId=2782704]
    The Satellite A665 is very similar to the European A660 series and the solution is to enable wireless communication, press the Wireless Antenna ON/OFF button located on the System Indicator Panel above the keyboard. Once the Wireless Antenna is ON, you can use the FN+F8 keys to turn wireless on.

  • Problem with xfce and/or mouse and keyboard

    Hi!
    Two days ago I've turned on my laptop with Arch and the display manager Slim has frozen immediately. Later on Single-User mode I've uninstalled it. Now in normal mode when I type "startxfce4" everything is showing up, but the mouse and keyboard don't work. I know it's not frozen, because animation of mouse and CPU Frequency Monitor is on.
    Strange fact is that laptop is not connecting with the Internet, so now I don't know where the problem is.
    It's happening when I start xfce both from user and super user.
    Just before those troubles I've updated everything with "pacman -Syu", but I haven't seen anything strange. Also the computer could have been roughly turned off (by unplugging power supply), when was turning on.
    Thanks,
    Gaba

    Sorry for not replying, but I didn't have access to my laptop by this time.
    On grub I have only normal mode and 'fallback' mode, so I have result from 'journalctl' from normal mode.
    I'm sending the fragment of this file where you can see everything after I typed 'startxfce4' in console:
    http://codepad.org/8pYIj8qC
    I see that something is wrong, but after some attempts I don't know how to fix this ^^
    Edit:
    Oh, I forgot to write, that I've tried activate some drivers from 'lspci -k' (there were no "Kernel driver in use:..." in almost every device), but it didn't fi anything.
    Last edited by gargoyle (2015-03-15 23:20:18)

  • Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?

    Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?

    Everytime this happens Ihave to power down and restart! Any ideas would be appreciated!

  • HP PAVILION DV6T-7000 (A5F76AV) ..Display and keyboard

    Hi 
    The screen on my notebook [HP PAVILION DV6T-7000 (A5F76AV)] does not have good vewing angles, it glares alot. Is it possible to upgrade the screen? I think it is a stantard HD type with 1366 x 768 px resolution, and I'm hoping to upgrade it to a WUXGA anti glare type screen with 1920 x 1200 or 1080  px resolution.
    I checked on hp'partsurfer and I guess this is what i'm looking for: ( 682068-001SPS-DSPLY HU 15.6 FHD AG ALU DSC )
    I'm currently in saudi arabia. Can you please tell me if the screen can be upgraded here?
    Apart from that the keyboard does not have a backlight. Can I upgrade the keyboard to a backlit keyboard?
    Thanks.
    This question was solved.
    View Solution.

    Hello Ryan-7,
    Welcome to the HP Forums! I hope you enjoy your experience!
    I understand you are looking to upgrade your display screen and keyboard. I will provide the best information I can to assist you! As a reference, I will provide this product's maintenance and service guide.
    Here are all of the displays available for this notebook, with a description:
    15.6-in display assembly
    For use on all computer models:
    15.6-in, AntiGlare, FHD display assembly in aluminum finish: 682066-001
    15.6-in, BrightView, HD display assembly in aluminum finish: 682065-001
    For use only with computer models equipped with an Intel processor:
    15.6-in, AntiGlare, FHD display assembly in aluminum finish (for use only on computer
    models equipped with a graphics subsystem with discrete memory): 682068-001
    15.6-in, AntiGlare, FHD display assembly in magenta finish (for use only on computer
    models equipped with a graphics subsystem with discrete memory): 685985-001
    15.6-in, AntiGlare, FHD display assembly in magenta finish: 685983-001
    15.6-in, BrightView, HD display assembly in aluminum finish (for use only on computer
    models equipped with a graphics subsystem with discrete memory): 682067-001
    15.6-in, BrightView, HD display assembly in magenta finish (for use only on computer
    models equipped with a graphics subsystem with discrete memory): 685984-001
    15.6-in, BrightView, HD display assembly in magenta finish: 685982-001
    Here are all of the available keyboards that are backlit:
    Keyboard with backlight (includes backlight cable):
    For use on all computer models in the United States: 682081-001
    For use only on computer models equipped with an Intel processor in Saudi Arabia: 682081-171
    For use only on computer models equipped with an Intel processor in Belgium: 682081-A41
    For use only on computer models equipped with an Intel processor in the Netherlands: 682081-B31
    The one in bold is the one available in your location, to make it easier for you. To order the part, you simply need to call HP.
    You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know if you have any other questions or concerns. Thanks for choosing the HP Forums. Have a great day!
    Mario
    I worked on behalf of HP.

  • USB mouse and keyboard not working

    Any advice/thoughts/suggestions appreciated:
    All 3 USB ports at the back of my iMac have stopped working.  This means I can't use either a keyboard or mouse, so have no way of logging in.  I turn my iMac on, it boots up as usual, but when it gets to the login screen, the mouse and keyboard don't work and I get a message about bluetooth set-up. (Both my mouse and keyboard are wired, not bluetooth). 
    I have tried an SMC reset (by turning the iMac off, unplugging all USB devices and the power cable, leaving the iMac for a few minutes and then plugging the cable back in a turning it on again).  This didn't work.
    I've also tried a different version of the SMC reset where I hold down the power button whilst all the cables are unplugged and also as I plug the power cable back in.  After doing this, the fan turns on at full speed (v loud), but the mouse and keyboard still don't work.
    I've also checked my mouse on a different computer and it works fine.
    Has anyone got any other suggestions / workarounds?
    Note I can't do a PRAM reset because my keyboard doesn't work.
    Is it probably that the USB hardwear has failed?  If so, is it possible to repair this?  It is worth repairing given it is a 5/6 year old iMac (the white plastic one) which is probably on its last legs anyway?
    many thanks!
    Jez.

    Try the SMC reset again, only this time wait 5 minutes in set 3 instead of fifteen seconds.
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds. 5 minutes.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.

  • USB mouse and keyboard don't work on HP Pavilion g7 2203sd, Windows 8.1.

    It is not possible to use a USB mouse or keyboard on the HP Pavilion g7 2203sd notebook running Windows 8.1.
    A wireless mouse used to work (already some time ago), but now wired or wireless mouse and keyboard don't work any more.
    I have tried removing USB devices in the Windows Device Manager and let Windows detect them again, but it does not work.
    I read somewhere that it might have to do with the xHCI USB controller that is installed.
    I tried removing that and connecting the USB mouse but no succes.
    I also looked for driver updates or something to disbale in the BIOS (like xHCI), but nothing found for that.
    Can anybody help me with this problem.
    Thanks!

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are having issues with the Keyboard on your Notebook.
    We will surely assist you with this.
    Let’s start with a questions.
    1. Was there any liquid split on the Notebook Keyboard
    2. Is there any Dust settled on the Notebook Keyboard
    3. Are there any Keys which are fallen off / Any Keys which are loose
    Troubleshooting: 
    Step 01. Could you please check and verify if External Keyboard works fine or not?
    Note: Please click on the below shown link to find more troubleshooting steps
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc...
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    I work on behalf of HP

  • Macbook Air Trackpad And Keyboard Unresponsive!! PLEASE HELP!

    Hello everyone, a while ago (about 2 months) my Macbook air started having troubles with its trackpack and keyboard. At random times they would become unresponsive and just stop working. They would work for like 1 second when the computer turns on but then it would stop. A couple weeks ago the problem stopped occuring the keyboard and trackpad were working fine and dandy. Of course until last night, I open the computer and the trackpad and keyboard won't work.. The keyboard lights are on and the power button works but nothing else does it is extremely frustrating! I did an SMC reset which worked for like 5 minutes until it stopped working again. I have done a NVRAM reset nothing, I have done everything that I have seen but I need a fix for this! The mac is running OS X 10.9.3 and I am pretty sure that is the latest. Please help me guys I am really getting frustrated with this undying problem ;/

    you don't need to disassemble your device.
    4 days is a lot.
    maybe rust has already been created.
    cross fingers.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Macbook Air Mid 13 TrackPad and Keyboard Stopped working.

    Both trackpad and mouse work when I have to sign into my account; however, once I'm on my windows screen both stop working. It tries and searches for bluetooth keyboard and mouse. I don't know how else to fix this issue. Please help I have tried all recovery options and erased everything on disk utility ( i saved my files first ) . for now i have been using an external mouse and keyboard. I also had the newest software update os x yosemite but when i re installed os x it installed lion but still the same problem.

    finally its fixed!! ...i went on the mac osx hints site...someone suggested resetting the pram and pmu...i was worried i wouldn't be able to hit the key combinations because of the whole keyboard thing...but apparently, my keyboard still worked until it got into os x...so i reset the pmu with shift-option-control-power while the computer was off...and voila...problem solved!!
    thanks for all your help....you *******!! lol jk
    peas

  • Problem with rotation and keyboard click sound

    Ok, there's still a problem with the rotation and keyboard click sound and I thought I had the problem fixed.
    It's a serious bug when you want the keyboard click sound enbabled without having the rotation locked. I noticed this bug started when I had the previous iosinstalled 7.0.6.
    Everytime I wanted to enable the keyboard click sound, I have to always go to settings and have lock rotation checked. And it would stay locked.
    If I wanted to rotate my iPad, I have to have mute enabled, but no keyboard click sound.
    I know it sounds confusing. I'm already confused... beh.

    I completely forgot about that.
    Thank you!

  • Trackpad and Keyboard intermittent Freezing

    My trackpad and keyboard are freezing at random intervals for random spans of time (usually for a few seconds). I havent downloaded any recent software that has cause this to my knowledge. Any help would be wonderful because even typing this is frustrating.

    I just took delivery of a new MacBook a couple of days ago. When I started it up I let it restore all of my user files, applications, and everything from a Time Machine backup. That worked fine, but now Time Machine wants to perform the initial, lengthy backup on a new machine. I find that when that is running, the trackpad and keyboard both freeze and I can't do anything. Strangely, if I plug a Logitech travel mouse into one of the USB ports, that is able to drive the mouse cursor. The keyboard is still frozen until I turn the backup off though.
    I'm going to plug the MacBook directly into the Time Capsule to get the backup to go faster, but I still wonder: is there a way to reduce the priority of the Time Machine process so I can use the MacBook while the backup is running?

  • Macbook Pro trackpad and keyboard freezes after attempting sleep mode

    I bought this computer on April 2008. It has the latest OS X 10.5.6 and it did not accept the trackpad firmware. I tried to install and the software said "this computer does not need this update".
    This has been happening a lot when I am using Skype while talking to someone with video and sound. The computer tries to go on sleep mode because I am not typing or touching it - it thinks I am away because I am just talking and watching the person on the other side.
    I touch the computer to avoid getting on sleep mode and with that it freezes the trackpad and keyboard. I continue to listen and see the other person and they continue to see me and hear me, but I cannot move the "mouse" cursor on the screen or type anything. Neither can I force to quit anything. The only thing that works is to close the computer and open again, that forces the computer to go into sleep mode then I can make it wake up again by opening it and touching any key on the keyboard.
    This have been interrupting Skype calls and a study I am conduting. I have to keep touching the computer trackpad to not let it sleep ever. I am concerned is something with the battery or maybe it needs some kind of firmware.
    This is very recent, just started happening this week (March 2009). I have not added any new software or any hardware to the machine.
    What can I do to make the trackpad and keyboard stop freezing when the computer tries to sleep?

    this is in the wrong category. I added a new message to the right category: MacBook Pro but I don't know how to delete it from here.

  • Discontinuation indicator and follow up material.

    Hi,
    I am facing the strange issue for which i need your expertise. The requirement is like:
    1. "X" material is discontinued and "Y" is as follow-up in two plants A & B. Discontinaution group and follow-up group has also been assigned in the BOM.
    2. Now The client want to reverse the settings . means "Y" should be discontinued and "X" should be follow-up in both plants A & B.
    Now I have removed the discontinuation indicator and follow up material from "X" in both plants. But when I am going to discontinue the "Y" material and putting " X" as a follow-up material, The system is giving the message "The specified follow-up material results in recursiveness
    Message no. M3609
    Diagnosis
    You have entered a follow-up material. However, the BOM explosion for the follow-up material leads to the discontinued material, resulting in unpermissible recursiveness.
    Procedure
    Enter another follow-up material or cancel the entry.
    Please suggest me where I am missing in my settings and what is the reason for this message.
    Regards
    Deepak Sharma

    Dear ,
    Check the following  :
    1.Validity of the Bill Of Material or any deletion flag is set in the present BOM.
    2.Please check the following SAP notes :
    Note 161742 - Consulting note: BOM recursion/low-level code 999
    Note 839879 - Trace 'BOM is recursive'
    Note 139517 - Recursiveness for follow-up materials
    Note 42891 - Recursiveness check
    Hope this will help you to figure it out
    Regards
    JH

Maybe you are looking for