Indicator - If the Document is Sourcing-Relevant is not set

hi All,
We are using SRM7.0 scneario PDP, creating PR in ECC once it is released transered to SRM creates SC, we do not have any approval for SC it will get auto approved once created.
SC should be available in SOCO since we have Defined Sourcing for Product Categories as "*" and Soucring always carried out,
further when we check for some of SC's which are available in SOCO indicator was set at BBP_PDIGP-SOURCE_REL_IND, and it is a but for some of them it was not set.
Any idea why this indicator was not set.
please share if you ever face the same issue.
regards,
SRM

Hi,
Did you tested this functionality in SRM shopping cart process? Create a shopping cart with multiple line items and check whether this is working fine or not within SRM.
Also refer SAP note  1432540 ( Sourcing relevant flag is not updated properly)
Regards,
Krish

Similar Messages

  • I am trying to use a interactive form and it says "If this message is not eventually replaced by the proper contents of the document, your PDF  viewer may not be able to display this type of document."  This is a IRS form and has worked before.

    I am trying to use a interactive form and it says "see below"  This is a IRS form and has worked before.
    is there a tech support phone number?
    Please wait...
    If this message is not eventually replaced by the proper contents of the document, your PDF
    viewer may not be able to display this type of document.
    You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by
    visiting http://www.adobe.com/go/reader_download.
    For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
    Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark
    of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries

    That means you are looking at the form online with a browser that uses its own (incompatible) PDF viewer, not the Adobe Reader plugin.
    Either
    download the form to your local disk and fill it from there
    use a browser that employs the Adobe Reader plugin
    configure your browser to use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the  "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

    I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the  “Adobe Photoshop JPEG file” format.
      What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

    JoeLib wrote:
    You type way faster than me Gene.
    Well, not necessarily in this case.
    According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
    Gene's post:       Dec 29, 2014 5:54 PM
    Joe's post:          Dec 29, 2014 8:57 PM

  • The document "03540 phone numbers" could not be opened.

    strange problem with numbers:
    suddenly have following message:
    The document “03540 phone numbers” could not be opened.
    have it on every file I try to open with numbers. Pages works normally.
    Anyone experienced something like this?
    How to get round it?
    Mark

    tried to open with time machine (yes, I do backups   :-)    but how does this system work?  I can get a preview of the file, but again can' t open it.
    a new file I created, I do am able to open it.

  • The document "view.do.pdf" could not be exported as "view.do.pdf".

    Just recently I have been getting the following message when trying to safe a document as a pdf "The document “view.do.pdf” could not be exported as “view.do.pdf”.  I updated all of my software and cannot figure out why I cannot save a document from the web as a pdf.
    Thank you,
    Don

    How exactly are you trying to Export it?
    Can you right click or control+click on it & use Save As... ?

  • I close the textedit programme , open Pages, click on the 09 pages file to be opened and the message "The document "7-09 receipts" could not be opened. TextEdit cannot open files in the "Pages document"

    I close the textedit programme , open Pages, click on the 09 pages file to be opened and the message "The document “7-09 receipts” could not be opened. TextEdit cannot open files in the “Pages document”
    What's this??? How do I open the pages doc???   Kalavati

    You have obviously not done what you think you have done.
    You have tried to open a .pages document in TextEdit which can't read them.
    If you are confused which program you are in look to the top left of the menu.
    You can either drag the .pages file onto the Pages icon on the Dock, open it from within Pages' Open dialog, double click on it or right mouse click > open with.
    Peter

  • HT3775 The document "IMG_7525-1.MOV" could not be opened. The movie is not in a format that QuickTime Player understands. what can I do to see my videos?

    The document “IMG_7525-1.MOV” could not be opened. The movie is not in a format that QuickTime Player understands. What can I do to see this videos if they are on a MOV format?

    You should be able to play it using the free VLC:
    http://www.videolan.org/vlc/download-macosx.html

  • Upgrading to ios 7 my ipad is stuck joining a network, I can't do anything with it, if I press the home button it says ipad not set up.

    If I press the home button it says ipad not set up then gives me the option to continue I press that and am back to a screen which says joining other network, can't press anything on that. It's been like it for about half an hour now. help.

    Hello Netski1961,
    Thank you for using Apple Support Communities!
    I have 2 recommendations here. First from article iOS: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430:
    Restarting your iOS device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
    If you are unable to continue, try resetting the phone with this from the same article:
    Resetting your device
    If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
    Cheers,
    Sterling

  • HT201269 I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and  basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can

    I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and  basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can reset it?

    You can't reset it.  If you don't konw the password then you can't use that backup

  • I am having trouble printing  and am only getting part of the document which i have no margins set any help??

    i am having trouble printing  and am only getting part of the document  i have no margins set any help??

    What version of Pages?
    What Printer?
    If it is Pages '09, turn Comments off.
    Peter

  • The ODBC data source administrator does not have the mysql odbc 3.51 driver

    Hi^^,
    I am trying to create the DSN for the type 1 driver.
    I go the the ODBC data source administrator > click userdsn>add
    It takes me to the screen"Create new data source"
    Here i want to select Mysql ODBC 3.51 Driver and then click on finish.
    My problem is that I do not have the choice of Mysql ODBC 3.51 Driver.
    How do I get it among my list of choices.
    Is the mysql software corrupt and do i need to install it.
    Regards,
    Prashant

    Don't use odbc at all for java <-->MySQL. Use the JDBC driver from the MySQL website

  • UI API issue, clicking base document on sales order does not set ActiveForm

    I have a sales order window open with a sales order loaded.  When I right click and click on base document, the sales quotation window shows up properly, however in code when I get the ActiveForm, it is the sales order form and not the sales quotation form!
    Private Sub SBO_Application_FormDataEvent(ByRef BusinessObjectInfo As SAPbouiCOM.BusinessObjectInfo, ByRef BubbleEvent As Boolean) Handles SBO_Application.FormDataEvent
        If BusinessObjectInfo.Type = bo_type.SALES_QUOTATION And BusinessObjectInfo.BeforeAction = False And    BusinessObjectInfo.EventType = BoEventTypes.et_FORM_DATA_LOAD
            SBO_Application.MessageBox(SBO_Application.Forms.ActiveForm.Type) 'shows 139 instead of 149?
        End If
    End Sub
    If quotation data is loaded using the next/prev/first/last buttons on the menu bar, the activeform .Type is 149.
    If quotation data is laoded using the Base Document shortcut on the sales order, the activeform.Type is 139.
    Is that suppose to be correct?  If so, how do I get the new sales quotation form that is created by using the base document shortcut?
    Edited by: Dung Nguyen on Aug 24, 2011 2:12 AM

    János Nagy wrote:
    Hi Dung,
    >
    > Formdataevent is handling trhe data events, not GUI events. In form data load means that the form is data is loaded, not that the form is activated.
    >
    > You must handle menuevent, and in menuevent before_action = false case the active form will be the sales quotation (or child/parent in the document flow).
    >
    > You may use an SDN tool to determine the events. You can download it from:
    > http://www.sdn.sap.com/irj/scn/businessone-tools
    >
    >
    > Regards
    >
    > János
    The problem with form activated is that it is triggered everytime the window is "activated'.  Meaning that if a user clicks out of the form and clicks back in, the form activated event is triggered.
    I need to perform an operation only on the first time the form and data is loaded and/or activated.

  • PB60 - Print Word Documents - Error: TEMP viariable is not set??

    Hi to all,
    I got the following problem with transaction PB60.
    If I want to print or edit word documents, it works all fine in SAP GUI. If I use this transaction over SAP WebGui (Internet Transaction Server), I got an error that the TEMP Windows variable is not set.
    Well, I don't understand that error. First, the variable TEMP is set and secondly it works in SAP GUI, so why is it not working with SAP Transaction Server?
    We are working on SAP ERP 2004.
    Help would be rewarded!
    Regards,
    Frank
    Edited by: Frank Wendel on Feb 16, 2010 1:25 PM

    I have done that and can also see this parameter in windows (and have restart my client). Although the error is still there.
    By the way, I have read in customizing help, that you have to set a environment variable called "Path_to_codepage" which should normally be there when installing SAP Gui. In my case, it is not there so I will proove this...
    Any other ideas?

  • Why are the Java Library source code classes not indented properly?

    I have always admired the design of a lot of classes and frameworks in the JDK. I read the source code a lot to see how the developers coded a particular class, how they designed it and how they write the javadocs.
    But one thing I observed was the improper indentation of the source code. Why is this so?

    I have always admired the design of a lot of classes
    and frameworks in the JDK. I read the source code a
    lot to see how the developers coded a particular
    class, how they designed it and how they write the
    javadocs.
    But one thing I observed was the improper indentation
    of the source code. Why is this so?Repeating what was said above....do not look upon the Java API as an example of how to do anything, not for design, not for code implementations and not even for code structure.

  • The document window in Dreamweaver does not match the tutorial.

    There is no Document title box.

    I don't use the Extract workspace.  Have you tried changing to Code or Design workspace (upper right corner)?  In addition, you can create a custom workspace and save it. 
    Nancy O.

Maybe you are looking for